OMG - Its working, you guys are the best for sticking with such a noob through the full setup process. ! I LOVE YOU GUYS.
Great, glad it's working.
There are some real pros on here, especially Dogie.
Topic: [Guide] Dogie's Comprehensive ASICMiner Cube Setup [HD] - page 7. (Read 187411 times)
Great, glad it's working.
There are some real pros on here, especially Dogie.
OMG - Its working, you guys are the best for sticking with such a noob through the full setup process. ! I LOVE YOU GUYS.
The only IP address that might be a problem to share is your external IP. All 192.168.x.x are non-routeable addresses.
Yep, for example mine will look almost identical because ipconfig /all only describes the relationship between your computer and your router - nothing external. So there's a few problems. You have the .bat doing strange things. At the moment your proxy is facing eligius pool and not slush's. You don't have to run any other information as it defaults to slush's. You also had -q for some reason that just confused it. This is for slush's:
Code:
cd C:\Users\Mark\Desktop\mining_proxy.exe
mining_proxy.exe
mining_proxy.exe
Also removed the port as there's no point moving it. Change the "Pool ports" back to 8332,8332. Now assuming your computer is at .201, your router at .200 and that's the miner details for slush's you should be good to go.
I don't feel comfortable with my IP settings out where everyone can see them.
The only IP address that might be a problem to share is your external IP. All 192.168.x.x are non-routeable addresses. I hope this works... Here are all my ip setting.
Thank you once again guys ! you guys are the best.
Can you post the contents of your .bat file as well?Thank you once again guys ! you guys are the best.
I'll stare at these a bit and see what I can see.
Well, that's the sticky wicket. Here's what in my .bat file:
Code:
cd C:\Users\M\Downloads\Old junk\CTB\Cube Proxy
mining_proxy.exe -o stratum.mining.eligius.st -p 3334 -q
mining_proxy.exe -o stratum.mining.eligius.st -p 3334 -q
Obviously, that would change for you, based on your location for the proxy and the pool you are using.
Clearly I feel like a dumbass... But i'm still having problems... This is what I made for a .bat File = cd C:\Users\Mark\Desktop\mining_proxy.exe
mining_proxy.exe -o stratum.mining.eligius.st -p 8330 -q .... Does that look correct ?
Well, no, you have mining_proxy.exe in there twice.
Change the 8330 to 3334.
Try those changes, and see what happens.
I hope this works... Here are all my ip setting.
Thank you once again guys ! you guys are the best.
Can you post the contents of your .bat file as well?Thank you once again guys ! you guys are the best.
I'll stare at these a bit and see what I can see.
Well, that's the sticky wicket. Here's what in my .bat file:
Code:
cd C:\Users\M\Downloads\Old junk\CTB\Cube Proxy
mining_proxy.exe -o stratum.mining.eligius.st -p 3334 -q
mining_proxy.exe -o stratum.mining.eligius.st -p 3334 -q
Obviously, that would change for you, based on your location for the proxy and the pool you are using.
http://i65.photobucket.com/albums/h213/markcus007/myipsettings2_zpse3dee519.jpg
Clearly I feel like a dumbass... But i'm still having problems... This is what I made for a .bat File = cd C:\Users\Mark\Desktop\mining_proxy.exe
mining_proxy.exe -o stratum.mining.eligius.st -p 8330 -q .... Does that look correct ?
I hope this works... Here are all my ip setting.
Thank you once again guys ! you guys are the best.
Can you post the contents of your .bat file as well?Thank you once again guys ! you guys are the best.
I'll stare at these a bit and see what I can see.
Well, that's the sticky wicket. Here's what in my .bat file:
Code:
cd C:\Users\M\Downloads\Old junk\CTB\Cube Proxy
mining_proxy.exe -o stratum.mining.eligius.st -p 3334 -q
mining_proxy.exe -o stratum.mining.eligius.st -p 3334 -q
Obviously, that would change for you, based on your location for the proxy and the pool you are using.
I hope this works... Here are all my ip setting.
Thank you once again guys ! you guys are the best.
Thank you once again guys ! you guys are the best.
Can you post the contents of your .bat file as well?
I'll stare at these a bit and see what I can see.
I think we might have found the problem... I thought since I am using Slush's pool, I didn't need to make a .bat file. Unless you are talking about the Proxy Sever Screen shots. Can you guys please [email protected]/ I don't feel comfortable with my IP settings out where everyone can see them.
Thanks guys.
Edit the photo showing your external IP.... Dnagerous!!!
I hope this works... Here are all my ip setting.
Thank you once again guys ! you guys are the best.
Thank you once again guys ! you guys are the best.
Can you post the contents of your .bat file as well?
I'll stare at these a bit and see what I can see.
Hi,
I'm Still looking for a replacement hashing board, new or used. PM me if you have one to sell.
Have 2 cubes running but one is a bit crippled, only 26GHS
I'm Still looking for a replacement hashing board, new or used. PM me if you have one to sell.
Have 2 cubes running but one is a bit crippled, only 26GHS
I need those 3 screenshots to be able to help.
Yeah still no luck with the pool being = 192.168.1.201.
This is what my Wan router from my isp says =
WAN Connection Status
WAN Type: Ethernet
Dynamic/Static: Dynamic
Modem IP Address: 156.34.90.95
Subnet Mask: 255.255.252.0
Default Gateway: 156.34.88.1
Lease Time Remaining: 16M 24S
DNS Address #1: 47.55.55.55
DNS Address #2: 142.166.166.166
Do you guys think these setting are messing me up ?
This is what my Wan router from my isp says =
WAN Connection Status
WAN Type: Ethernet
Dynamic/Static: Dynamic
Modem IP Address: 156.34.90.95
Subnet Mask: 255.255.252.0
Default Gateway: 156.34.88.1
Lease Time Remaining: 16M 24S
DNS Address #1: 47.55.55.55
DNS Address #2: 142.166.166.166
Do you guys think these setting are messing me up ?
Someone with better networking eyes will have to take a look at that. I should think that if you can connect to that interweb dealio without any issues, that should be fine. But don't quote me.
One thing about the Cube, you've got its IP pegged at the high limit.
Try backing that down a bit, some IP you aren't using of course. 192.168.1.200 is what the original post recommends.
Yeah still no luck with the pool being = 192.168.1.201.
This is what my Wan router from my isp says =
WAN Connection Status
WAN Type: Ethernet
Dynamic/Static: Dynamic
Modem IP Address: 156.34.90.95
Subnet Mask: 255.255.252.0
Default Gateway: 156.34.88.1
Lease Time Remaining: 16M 24S
DNS Address #1: 47.55.55.55
DNS Address #2: 142.166.166.166
Do you guys think these setting are messing me up ?
This is what my Wan router from my isp says =
WAN Connection Status
WAN Type: Ethernet
Dynamic/Static: Dynamic
Modem IP Address: 156.34.90.95
Subnet Mask: 255.255.252.0
Default Gateway: 156.34.88.1
Lease Time Remaining: 16M 24S
DNS Address #1: 47.55.55.55
DNS Address #2: 142.166.166.166
Do you guys think these setting are messing me up ?
Thank you for the help guys, I can't post pictures here for some reason so I will just type it out.
Secondary DNS 8.8.8.8
Pool ports 8330,8330
Pool addresses192.168.1.200,192.168.1.200 192.168.1.201,192.168.1.201
Miners user:pass markcus.cube:1234,markcus.cube:1234
Just a heads up, when I google search "Whats my IP" it comes back with 156.34.90.95.
Thank you once again for all your help.
Secondary DNS 8.8.8.8
Pool ports 8330,8330
Pool addresses
Miners user:pass markcus.cube:1234,markcus.cube:1234
Just a heads up, when I google search "Whats my IP" it comes back with 156.34.90.95.
Thank you once again for all your help.
Your pool addresses need to match the IP of the machine you are running the Cube on, as I noted above.
That IP you Googled is some server somewhere, not your actual machine.
Pool addresses 192.168.1.200,192.168.1.200 should be 192.168.1.201,192.168.1.201
Thank you for the help guys, I can't post pictures here for some reason so I will just type it out.
Here are my IP CONFIG Stats
IPv4 address 192.168.1.201
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.200
DHCP Server 192.168.1.200
dns servers 192.168.1.200
Here is my Cube inter face.
IP 192.168.1.254
Mask 255.255.255.0
Gateway 192.168.1.200
WEB Port 8000
Primary DNS 192.168.1.200
Secondary DNS 8.8.8.8
Pool ports 8330,8330
Pool addresses 192.168.1.200,192.168.1.200
Miners user:pass markcus.cube:1234,markcus.cube:1234
Just a heads up, when I google search "Whats my IP" it comes back with 156.34.90.95.
Thank you once again for all your help.
-Markcus
Here are my IP CONFIG Stats
IPv4 address 192.168.1.201
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.200
DHCP Server 192.168.1.200
dns servers 192.168.1.200
Here is my Cube inter face.
IP 192.168.1.254
Mask 255.255.255.0
Gateway 192.168.1.200
WEB Port 8000
Primary DNS 192.168.1.200
Secondary DNS 8.8.8.8
Pool ports 8330,8330
Pool addresses 192.168.1.200,192.168.1.200
Miners user:pass markcus.cube:1234,markcus.cube:1234
Just a heads up, when I google search "Whats my IP" it comes back with 156.34.90.95.
Thank you once again for all your help.
-Markcus
Somehow I can't connect to it even though my subnet is correct and I tried direct connect with 3 different computers and different OS.
Is it broken if the red light doesn't turn off?
Are you able to see its IP using an IP scanner? Is it broken if the red light doesn't turn off?
Somehow I can't connect to it even though my subnet is correct and I tried direct connect with 3 different computers and different OS.
Is it broken if the red light doesn't turn off?
Is it broken if the red light doesn't turn off?
Hi everyone... I love bit coining but I am not loving this Block Erupter Cube... I have been trying to set it up for 5 days, I got as far as entering my data into the cubes interface and running the proxy, but this is the errors I am getting =
08:09:40,259 info proxy client_service.handle_event # newjob ccd9 for prevhash a28087c3, clean_jobs=False
I think its my IP or Worker.... Please Help, I really want this to work.
Upload a screenshot of the cube config page, cmd with ipconfig /all and of the proxy please.08:09:40,259 info proxy client_service.handle_event # newjob ccd9 for prevhash a28087c3, clean_jobs=False
I think its my IP or Worker.... Please Help, I really want this to work.
Ha, this kills me. I thought I said this, and sure enough, I did not.
We need these Markus, to see whatever else is going on.
Jump to: