[Guide] Dogie's Comprehensive Bitmain AntMiner S1 Setup [HD] - page 10.

wedgy2k

sr. member

Activity: 329

Merit: 251

Quote from: dogie on May 09, 2014, 02:05:03 PM

Quote from: wedgy2k on May 09, 2014, 01:53:25 PM

Hi
As the temperature is rising, so is the noise and temps of my S1's

Do you know of i could add these at either end of my S1's in a push / pull formation
http://www.corsair.com/en/air-series-sp120-pwm-high-performance-edition-high-static-pressure-fan-twin-pack

hopefully reduce the noise and the temps
I currently have temps of 50c and a fan speed of 3240 (OC'ed to 375 190GHs ish) which is getting a bit annoying now - I can even hear them echoing in my head when I'm at work lol

Yep, will get about 6C off the temps. Alternatively if you only have a few you can do the cooling mod (reverse both boards so the heatsinks both face outwards, then 2x120mm per blade blowing directly onto each heatsink).

Thank you, i'll go and get them tomoz and report back Grin

freebit13

hero member

Activity: 616

Merit: 500

I got Satoshi's avatar!

Quote from: wedgy2k on May 09, 2014, 01:53:25 PM

Hi
As the temperature is rising, so is the noise and temps of my S1's

Do you know of i could add these at either end of my S1's in a push / pull formation
http://www.corsair.com/en/air-series-sp120-pwm-high-performance-edition-high-static-pressure-fan-twin-pack

hopefully reduce the noise and the temps
I currently have temps of 50c and a fan speed of 3240 (OC'ed to 375 190GHs ish) which is getting a bit annoying now - I can even hear them echoing in my head when I'm at work lol

Not sure if that fan is going to do enough on its own. I put silent fans on the side as well as a small one in the front and it made a big difference to the noise levels:

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: wedgy2k on May 09, 2014, 01:53:25 PM

Hi
As the temperature is rising, so is the noise and temps of my S1's

Do you know of i could add these at either end of my S1's in a push / pull formation
http://www.corsair.com/en/air-series-sp120-pwm-high-performance-edition-high-static-pressure-fan-twin-pack

hopefully reduce the noise and the temps
I currently have temps of 50c and a fan speed of 3240 (OC'ed to 375 190GHs ish) which is getting a bit annoying now - I can even hear them echoing in my head when I'm at work lol

Yep, will get about 6C off the temps. Alternatively if you only have a few you can do the cooling mod (reverse both boards so the heatsinks both face outwards, then 2x120mm per blade blowing directly onto each heatsink).

wedgy2k

sr. member

Activity: 329

Merit: 251

Hi
As the temperature is rising, so is the noise and temps of my S1's

Do you know of i could add these at either end of my S1's in a push / pull formation
http://www.corsair.com/en/air-series-sp120-pwm-high-performance-edition-high-static-pressure-fan-twin-pack

hopefully reduce the noise and the temps
I currently have temps of 50c and a fan speed of 3240 (OC'ed to 375 190GHs ish) which is getting a bit annoying now - I can even hear them echoing in my head when I'm at work lol

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: techman05 on April 29, 2014, 10:00:36 PM

Just curious since I don't see it in your s1 setup guide but could you also add how to change this that aren't changable via the interface like the config file. I want to change the api and I just want to make sure I know how to get to it.

I think to some extent if I'm in the right place I'm hoping I just have to use nano command if the ssh uses linux commands , but I thought I'd ask being right now you are #2 on a google search for it.

Thanks for any updates to your guide on this manner

This is something I avoid on S1s because its very very dangerous trying to play with the SSH. If you get a line wrong or a few characters in a line of code you push to it you can hard brick your unit as there is no safety mode to get back to WRT and reflash. You'd have to send it back to the manufacturer or buy a new control board.

techman05

hero member

Activity: 546

Merit: 500

Just curious since I don't see it in your s1 setup guide but could you also add how to change this that aren't changable via the interface like the config file. I want to change the api and I just want to make sure I know how to get to it.

I think to some extent if I'm in the right place I'm hoping I just have to use nano command if the ssh uses linux commands , but I thought I'd ask being right now you are #2 on a google search for it.

Thanks for any updates to your guide on this manner

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: demonmaestro on April 24, 2014, 07:36:35 AM

Quote from: dogie on April 24, 2014, 05:59:37 AM

Nothing you can do on this one. Luckily its only $400.

only $400 he says..

Well i got a rma for it.

I'm just saying it could be worse. Ie when Avalons were worth $50k

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

Quote from: dogie on April 24, 2014, 05:59:37 AM

Nothing you can do on this one. Luckily its only $400.

only $400 he says..

Well i got a rma for it.

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Nothing you can do on this one. Luckily its only $400.

ZiG

sr. member

Activity: 406

Merit: 250

Quote from: demonmaestro on April 24, 2014, 01:26:32 AM

so why would i pay for something when i know what the issue is?

But hey if you want to pay for it and it fixes it i will pay you back.
BUT they will probably tell me the same thing of what the issue is....

Hey, buddy...

You asked the question "What to do now?" ...I answered...Just TRYING TO HELP you...

I don't want anything...It is Your Miner...not mine...Simply said...I am spending my time and a good will to even watch your video clip ...mine situation was almost the same...and they spend maybe an hour or two...but were able to fix it remotely...

Just my 2 cents...

Good luck...

Cheers,

ZiG

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

so why would i pay for something when i know what the issue is?

But hey if you want to pay for it and it fixes it i will pay you back.
BUT they will probably tell me the same thing of what the issue is....

ZiG

sr. member

Activity: 406

Merit: 250

Quote from: demonmaestro on April 23, 2014, 07:21:03 AM

Quote from: demonmaestro on April 22, 2014, 02:56:43 AM

Like i said on my op that i had gotten it from a friend and he got it org from ebay. The person on ebay has disappeared...

so now what do i do??

You can try NinjaTech PAID tech support...:

https://ninjatech.org/Bitcoin%20Miner%20AntMiner

They fixed my Ant S1 remotely in the past...0.1 BTC...well spend...

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

Quote from: demonmaestro on April 22, 2014, 02:56:43 AM

Like i said on my op that i had gotten it from a friend and he got it org from ebay. The person on ebay has disappeared...

so now what do i do??

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

Like i said on my op that i had gotten it from a friend and he got it org from ebay. The person on ebay has disappeared...

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: demonmaestro on April 22, 2014, 02:03:05 AM

Quote from: dogie on April 22, 2014, 01:57:56 AM

Quote from: demonmaestro on April 22, 2014, 01:52:21 AM

how do i get a new board then?

Contact the seller/distributor/bitmain in that order

I have and that is the issue..

They wont return my calls and PMs

Who are the first two?

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

Quote from: dogie on April 22, 2014, 01:57:56 AM

Quote from: demonmaestro on April 22, 2014, 01:52:21 AM

how do i get a new board then?

Contact the seller/distributor/bitmain in that order

I have and that is the issue..

They wont return my calls and PMs

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: demonmaestro on April 22, 2014, 01:52:21 AM

how do i get a new board then?

Contact the seller/distributor/bitmain in that order

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

how do i get a new board then?

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: demonmaestro on April 21, 2014, 11:47:48 PM

Quote from: demonmaestro on April 09, 2014, 07:17:07 PM

Hey quick question. I have an AntMiner S1 and its not letting me access it via the address on the sticker. I just got it from a friend that was having some issues with it and trying to help them out. I have reviewed over the troubleshooting techniques and nothing has worked. I have pressed the little black button for 3 seconds, nothing. i tried it for 5 and still nothing. i tried the paper clip and still didn't work.

I have uploaded a small video of what lights are flashing.
https://www.youtube.com/watch?v=kzPJt_gczQc

Thank you for the help.

I have also ran a ip scan to see if it will pop up and nothing
192.168.1.x
and ran a scan of the
192.168.2.x
nothing comes up

DHCP table comes up with nothing as well..

I have ran wireshark of the 192.168.1.x and the only thing that is coming up is from the computer nothing of any other address.

The flashing is a message that it has no internet connection. If your router can handle the range its sitting in, then you'd have to assume dead network board.

demonmaestro

hero member

Activity: 574

Merit: 500

Mining for the hell of it.

Quote from: demonmaestro on April 09, 2014, 07:17:07 PM

Hey quick question. I have an AntMiner S1 and its not letting me access it via the address on the sticker. I just got it from a friend that was having some issues with it and trying to help them out. I have reviewed over the troubleshooting techniques and nothing has worked. I have pressed the little black button for 3 seconds, nothing. i tried it for 5 and still nothing. i tried the paper clip and still didn't work.

I have uploaded a small video of what lights are flashing.
https://www.youtube.com/watch?v=kzPJt_gczQc

Thank you for the help.

I have also ran a ip scan to see if it will pop up and nothing
192.168.1.x
and ran a scan of the
192.168.2.x
nothing comes up

DHCP table comes up with nothing as well..

I have ran wireshark of the 192.168.1.x and the only thing that is coming up is from the computer nothing of any other address.

Topic: [Guide] Dogie's Comprehensive Bitmain AntMiner S1 Setup [HD] - page 10. (Read 112137 times)