Pages:
Author

Topic: [Guide] Dogie's Comprehensive Bitmain AntMiner S1 Setup [HD] - page 12. (Read 112153 times)

legendary
Activity: 1018
Merit: 1001
HI, what kind of antenna I need to buy for the S1, I looked in several stores but have not found the right one. Any suggestions?
If I wanted to add a second fan an ARCTIC COOLING F12 PWM would be fine?

Thanks in advance
legendary
Activity: 1666
Merit: 1183
dogiecoin.com
Oh, super! Thanks for the prompt response!!
Np. It will be close if you want to OC though.
sr. member
Activity: 322
Merit: 250
3 ants will push it but should be doable. I wouldn't overclock though.

So basically, I can split an Ant between 2 of these? Each PSU has 4 PCI-E cables, pretty sure the explanation is clear enough with just text, but if a diagram helps let me know. No plans to OC.

Would be like this:
Ant1
PSU a

Ant2
PSU a & b (cable from each)

Ant3
PSU b
This is absolutely fine as there is no actual crossloading. Each blade in an S1 acts independently when it comes to power so you're essentially powering 3 miners on PSU a and 3 on PSU b.

Problems can happen when people power one miner with two PSUs due to crossloading issues.

I got the above configuration working without any issues, thanks.

Next question, pushing it more of course... Can I power 2 Antminers with a Corsair TX850w? Neither one is over-clocked.

Yes.

Oh, super! Thanks for the prompt response!!
legendary
Activity: 1666
Merit: 1183
dogiecoin.com
3 ants will push it but should be doable. I wouldn't overclock though.

So basically, I can split an Ant between 2 of these? Each PSU has 4 PCI-E cables, pretty sure the explanation is clear enough with just text, but if a diagram helps let me know. No plans to OC.

Would be like this:
Ant1
PSU a

Ant2
PSU a & b (cable from each)

Ant3
PSU b
This is absolutely fine as there is no actual crossloading. Each blade in an S1 acts independently when it comes to power so you're essentially powering 3 miners on PSU a and 3 on PSU b.

Problems can happen when people power one miner with two PSUs due to crossloading issues.

I got the above configuration working without any issues, thanks.

Next question, pushing it more of course... Can I power 2 Antminers with a Corsair TX850w? Neither one is over-clocked.

Yes.
sr. member
Activity: 322
Merit: 250
3 ants will push it but should be doable. I wouldn't overclock though.

So basically, I can split an Ant between 2 of these? Each PSU has 4 PCI-E cables, pretty sure the explanation is clear enough with just text, but if a diagram helps let me know. No plans to OC.

Would be like this:
Ant1
PSU a

Ant2
PSU a & b (cable from each)

Ant3
PSU b
This is absolutely fine as there is no actual crossloading. Each blade in an S1 acts independently when it comes to power so you're essentially powering 3 miners on PSU a and 3 on PSU b.

Problems can happen when people power one miner with two PSUs due to crossloading issues.

I got the above configuration working without any issues, thanks.

Next question, pushing it more of course... Can I power 2 Antminers with a Corsair TX850w? Neither one is over-clocked.
legendary
Activity: 1666
Merit: 1183
dogiecoin.com
How do you enable logging in to the miner web ui when it is connected to your lan only through wifi? Strangely I can log on with the wifi IP when a LAN cable is connected, but not without a LAN cable. I tried playing arounf with firewall setting, but couldn't find a solution. Huh

WAN has to also be set to DHCP.
Yep. It won't let you resolve a non DHCP address otherwise.
full member
Activity: 224
Merit: 100
How do you enable logging in to the miner web ui when it is connected to your lan only through wifi? Strangely I can log on with the wifi IP when a LAN cable is connected, but not without a LAN cable. I tried playing arounf with firewall setting, but couldn't find a solution. Huh

WAN has to also be set to DHCP.
legendary
Activity: 1666
Merit: 1183
dogiecoin.com
member
Activity: 89
Merit: 10
How do you enable logging in to the miner web ui when it is connected to your lan only through wifi? Strangely I can log on with the wifi IP when a LAN cable is connected, but not without a LAN cable. I tried playing arounf with firewall setting, but couldn't find a solution. Huh
newbie
Activity: 59
Merit: 0
s2 setup help please!
full member
Activity: 181
Merit: 100
full member
Activity: 224
Merit: 100
My understanding is it's not implemented in the GUI. Apparently the fan is controlled through the secondary connector so there is logic there to control the fan speed but it just doesn't indicate what it's doing. If you search posts you'll find someone who encountered this previously and was reaching out to Bitmain for a fix.
full member
Activity: 181
Merit: 100
ok so i re installed stock fan, temp is 43° now , any idea to get rpm of rear fan?
legendary
Activity: 1666
Merit: 1183
dogiecoin.com
i know its a bit hot but stock fan is horribly to noisy, cant stand it. i installed 2 bequiet shadow wings, now its quiet and as long as temp stays below 60° c i think it's ok, no?
Github suggests not to let it go above 50. These aren't on die or even on chip temps, so the actual die temps will be ~+30.
full member
Activity: 181
Merit: 100
i know its a bit hot but stock fan is horribly to noisy, cant stand it. i installed 2 bequiet shadow wings, now its quiet and as long as temp stays below 60° c i think it's ok, no?
newbie
Activity: 2
Merit: 0
hello, is there a way to activate rpm info on rear fan  Huh

http://nsm08.casimages.com/img/2014/04/02//1404021208035308912117092.png

Your temps look damn hot!!!!  Should be no where near that temp.  Have you got a PWM fan plugged into the second blade?
full member
Activity: 181
Merit: 100
hello, is there a way to activate rpm info on rear fan  Huh

legendary
Activity: 1666
Merit: 1183
dogiecoin.com
DiffA and DiffR are the important numbers as they take into account your pool difficulty.<1% is perfect.
Pages:
Jump to: