Which is best to put the adress
With stratum
Or without stratum at URL
With or it wont work With stratum
Or without stratum at URL
Topic: [Guide] Dogie's Comprehensive Bitmain AntMiner S1 Setup [HD] - page 22. (Read 112162 times)
February 22, 2014, 10:37:17 AM
February 22, 2014, 09:31:34 AM
Which is best to put the adress
With stratum
Or without stratum at URL
With stratum
Or without stratum at URL
February 22, 2014, 06:20:48 AM
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Same question here
I'd love to be able to see cgminer output through screen too !
Screen, as already told, isn't installed
We need to know what process is doing the multitasking, or if cgminer is run in a "silent mode" that is not showing outputs
cgminer is fired up as part of the boot process from init.d with the --quiet option
So no cgminer screen?
The script is open to edit and there should be more than enough memory left to run screen, the is also a package for it at http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages
I was going to play with better cooling this weekend but now I have multiple choices, cooling, screen or wash the cars
February 22, 2014, 06:06:06 AM
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Same question here
I'd love to be able to see cgminer output through screen too !
Screen, as already told, isn't installed
We need to know what process is doing the multitasking, or if cgminer is run in a "silent mode" that is not showing outputs
cgminer is fired up as part of the boot process from init.d with the --quiet option
So no cgminer screen?
February 22, 2014, 05:40:14 AM
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Same question here
I'd love to be able to see cgminer output through screen too !
Screen, as already told, isn't installed
We need to know what process is doing the multitasking, or if cgminer is run in a "silent mode" that is not showing outputs
cgminer is fired up as part of the boot process from init.d with the --quiet option
February 22, 2014, 05:15:45 AM
hi
i ve stabilised the psu
and have modfied the miner
still it s not hashing
there is one red led and green light blinking
anyone knows what can be the problem coming from?
i ve stabilised the psu
and have modfied the miner
still it s not hashing
there is one red led and green light blinking
anyone knows what can be the problem coming from?
maybe a pool problem. make sure credentials are right.
February 22, 2014, 05:02:27 AM
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Same question here
I'd love to be able to see cgminer output through screen too !
Screen, as already told, isn't installed
We need to know what process is doing the multitasking, or if cgminer is run in a "silent mode" that is not showing outputs
February 22, 2014, 04:27:21 AM
screen -r doesn't work, maybe its in the code but I don't know what the command is
Screen isn't installed by default.
http://www.tecmint.com/screen-command-examples-to-manage-linux-terminals/
February 21, 2014, 09:29:44 PM
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Same question here
I'd love to be able to see cgminer output through screen too !
February 21, 2014, 02:55:14 PM
hi
i ve stabilised the psu
and have modfied the miner
still it s not hashing
there is one red led and green light blinking
anyone knows what can be the problem coming from?
Are you able to log into to the miner?i ve stabilised the psu
and have modfied the miner
still it s not hashing
there is one red led and green light blinking
anyone knows what can be the problem coming from?
but still nothing on the miner status
on the system log, i have seen a message like asic stopped ....
Give us the actual message...
February 21, 2014, 01:22:47 PM
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Same question here
I'd love to be able to see cgminer output through screen too !
February 21, 2014, 12:02:33 PM
hi
i ve stabilised the psu
and have modfied the miner
still it s not hashing
there is one red led and green light blinking
anyone knows what can be the problem coming from?
Are you able to log into to the miner?i ve stabilised the psu
and have modfied the miner
still it s not hashing
there is one red led and green light blinking
anyone knows what can be the problem coming from?
but still nothing on the miner status
on the system log, i have seen a message like asic stopped ....
February 21, 2014, 11:49:09 AM
hi
i ve stabilised the psu
and have modfied the miner
still it s not hashing
there is one red led and green light blinking
anyone knows what can be the problem coming from?
Are you able to log into to the miner? i ve stabilised the psu
and have modfied the miner
still it s not hashing
there is one red led and green light blinking
anyone knows what can be the problem coming from?
February 21, 2014, 11:14:18 AM
hi
i ve stabilised the psu
and have modfied the miner
still it s not hashing
there is one red led and green light blinking
anyone knows what can be the problem coming from?
i ve stabilised the psu
and have modfied the miner
still it s not hashing
there is one red led and green light blinking
anyone knows what can be the problem coming from?
February 21, 2014, 09:01:23 AM
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Same question here
February 21, 2014, 08:25:07 AM
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Same question here
February 21, 2014, 07:05:16 AM
Great guide! I like how every one has links at the top to all the other - I just find any Dogie's Guide and then click the link for the one I want.
Just a note: my new S1 arrived today, and setup is super easy now. Plug in two PCI-E connectors and the Ethernet cable, turn on the PSU and it booted up and immediately started mining on the Bitmain default pool. I just had to go into pool settings to set up my pools. The only step that you might consider adding to the guide is to go into System -> Administration and change the Router Password from the default password of "root". Just for extra safety.
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Changing of the password isn't really required, only people behind your router could do anything to the settings. Its probably worth turning it off entirely.Just a note: my new S1 arrived today, and setup is super easy now. Plug in two PCI-E connectors and the Ethernet cable, turn on the PSU and it booted up and immediately started mining on the Bitmain default pool. I just had to go into pool settings to set up my pools. The only step that you might consider adding to the guide is to go into System -> Administration and change the Router Password from the default password of "root". Just for extra safety.
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Yep setup is now PCI-Es, but I've left the cable based setup as those 1st gen units will eventually be resold and require setting up again. Circle of life.
February 21, 2014, 07:03:52 AM
sorry if i missed it, but......
i can set 3 pools for fail-safe. can i make it switch between pools? like if i set 2 pools & wanted it to do so many hours @0 & so many hours @1
or am i just gonna have to manually switch it around?
That's called load balance. Fallover/failsafe means it will prefer 1 as long as 1 is up. Then it will go to 2, until 1 is up. i can set 3 pools for fail-safe. can i make it switch between pools? like if i set 2 pools & wanted it to do so many hours @0 & so many hours @1
or am i just gonna have to manually switch it around?
February 21, 2014, 05:01:14 AM
Great guide! I like how every one has links at the top to all the other - I just find any Dogie's Guide and then click the link for the one I want.
Just a note: my new S1 arrived today, and setup is super easy now. Plug in two PCI-E connectors and the Ethernet cable, turn on the PSU and it booted up and immediately started mining on the Bitmain default pool. I just had to go into pool settings to set up my pools. The only step that you might consider adding to the guide is to go into System -> Administration and change the Router Password from the default password of "root". Just for extra safety.
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
Just a note: my new S1 arrived today, and setup is super easy now. Plug in two PCI-E connectors and the Ethernet cable, turn on the PSU and it booted up and immediately started mining on the Bitmain default pool. I just had to go into pool settings to set up my pools. The only step that you might consider adding to the guide is to go into System -> Administration and change the Router Password from the default password of "root". Just for extra safety.
As a noob, one question I have is: I have been able to SSH to the AntMiner. Is there a way to view the cgminer screen?
February 20, 2014, 11:39:13 PM
sorry if i missed it, but......
i can set 3 pools for fail-safe. can i make it switch between pools? like if i set 2 pools & wanted it to do so many hours @0 & so many hours @1
or am i just gonna have to manually switch it around?
i can set 3 pools for fail-safe. can i make it switch between pools? like if i set 2 pools & wanted it to do so many hours @0 & so many hours @1
or am i just gonna have to manually switch it around?
Jump to: