Pages:
Author

Topic: [Guide] Dogie's Comprehensive Bitmain Antminer S3 Setup [HD] - page 14. (Read 137862 times)

legendary
Activity: 1666
Merit: 1185
dogiecoin.com
Hello,
I'm on a tight psu budget, what is the lowest i can go on psu watt for one miner?
Thanks

Pretty low, but then again a PSU is an investment which holds its resale value well. Not choosing a suitable PSU will likely hurt you later.
Yea i understand that, when you say Not choosing a suitable PSU will likely hurt you later. what are you thinking of then?

Early life failure = RMA costs + downtime costs + replacement costs + buying a suitable PSU in the future costs.
And then you talk about the PSU only?
downtime is no fun Cry
RMA whats that?

Warranty replacement
Ok thanks, then i have to decide what to do. RMA is a new word for me never heard of it in Sweden.
Regards

http://en.wikipedia.org/wiki/Return_merchandise_authorization
member
Activity: 110
Merit: 10
Hello,
I'm on a tight psu budget, what is the lowest i can go on psu watt for one miner?
Thanks

Pretty low, but then again a PSU is an investment which holds its resale value well. Not choosing a suitable PSU will likely hurt you later.
Yea i understand that, when you say Not choosing a suitable PSU will likely hurt you later. what are you thinking of then?

Early life failure = RMA costs + downtime costs + replacement costs + buying a suitable PSU in the future costs.
And then you talk about the PSU only?
downtime is no fun Cry
RMA whats that?

Warranty replacement
Ok thanks, then i have to decide what to do. RMA is a new word for me never heard of it in Sweden.
Regards
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
Hello,
I'm on a tight psu budget, what is the lowest i can go on psu watt for one miner?
Thanks

Pretty low, but then again a PSU is an investment which holds its resale value well. Not choosing a suitable PSU will likely hurt you later.
Yea i understand that, when you say Not choosing a suitable PSU will likely hurt you later. what are you thinking of then?

Early life failure = RMA costs + downtime costs + replacement costs + buying a suitable PSU in the future costs.
And then you talk about the PSU only?
downtime is no fun Cry
RMA whats that?

Warranty replacement
member
Activity: 110
Merit: 10
Hello,
I'm on a tight psu budget, what is the lowest i can go on psu watt for one miner?
Thanks

Pretty low, but then again a PSU is an investment which holds its resale value well. Not choosing a suitable PSU will likely hurt you later.
Yea i understand that, when you say Not choosing a suitable PSU will likely hurt you later. what are you thinking of then?

Early life failure = RMA costs + downtime costs + replacement costs + buying a suitable PSU in the future costs.
And then you talk about the PSU only?
downtime is no fun Cry
RMA whats that?
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
Hello,
I'm on a tight psu budget, what is the lowest i can go on psu watt for one miner?
Thanks

Pretty low, but then again a PSU is an investment which holds its resale value well. Not choosing a suitable PSU will likely hurt you later.
Yea i understand that, when you say Not choosing a suitable PSU will likely hurt you later. what are you thinking of then?

Early life failure = RMA costs + downtime costs + replacement costs + buying a suitable PSU in the future costs.
member
Activity: 110
Merit: 10
Hello,
I'm on a tight psu budget, what is the lowest i can go on psu watt for one miner?
Thanks

Pretty low, but then again a PSU is an investment which holds its resale value well. Not choosing a suitable PSU will likely hurt you later.
Yea i understand that, when you say Not choosing a suitable PSU will likely hurt you later. what are you thinking of then?
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
Hello,
I'm on a tight psu budget, what is the lowest i can go on psu watt for one miner?
Thanks

Pretty low, but then again a PSU is an investment which holds its resale value well. Not choosing a suitable PSU will likely hurt you later.
member
Activity: 110
Merit: 10
Hello,
I'm on a tight psu budget, what is the lowest i can go on psu watt for one miner?
Thanks
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
I flashed the firmware on all my S3s today. All except one completed the process. I could not connect to it. So i used the reset button.

I was not able to connect to the original IP address (192.168.1.99) after resetting.

I noticed that only the red light blinks. None of the other LED lights come on. Also, the green light for the internet connection only comes on for a few seconds after starting turning on the miner.

Any help or advice is appreciated.

Likely bricked if you can't get the reset button to work.
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
Hello legendary miners!

I'll be moving my small home-farm /9 antminers s3/ to a new location. And was wondering do I need to care what the new place' subnet is if all of my miners are set to DHCP protocol? In other words since they are all DHCP will they just start working when I plug 'em to the other place's lan?

Cheers!

You'll be fine, its exactly what DHCP is designed to do. They'll ask the router what IPs are available and then use what they're given.
newbie
Activity: 10
Merit: 0
Hello legendary miners!

I'll be moving my small home-farm /9 antminers s3/ to a new location. And was wondering do I need to care what the new place' subnet is if all of my miners are set to DHCP protocol? In other words since they are all DHCP will they just start working when I plug 'em to the other place's lan?

Cheers!
hero member
Activity: 786
Merit: 1000
I flashed the firmware on all my S3s today. All except one completed the process. I could not connect to it. So i used the reset button.

I was not able to connect to the original IP address (192.168.1.99) after resetting.

I noticed that only the red light blinks. None of the other LED lights come on. Also, the green light for the internet connection only comes on for a few seconds after starting turning on the miner.

Any help or advice is appreciated.
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
Thank you. Flashed to late October firmware. Works well. May I know the name of the software to search for?

Thank you

Vegas

Antminer monitor
legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
Thank you. Flashed to late October firmware. Works well. May I know the name of the software to search for?

Thank you

Vegas
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
So im setting up a farm with (20) S3+ B11 with a 24 port 10/100/1000 router. I have set them all on individual static ip. My question is: I mine altcoins mostly. Its REALLY time consuming to go in 20 times over and change the pool. Is there any way to change the pool ONCE, and affect them all? Also my firmware is back from August on all of them. Should I upgrade them all to antMiner_S320141126.bin? I heard the latest firmware slows speed to double digits. If this is not the best/fastest/stable one, which firmware is? Is there a modded unofficial firmware? I do alot of multipools too.

Vegas

Leave the latest firmware for now. There is a software program (see the other subforum) which will allow you to control your S3s from one place.
legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
So im setting up a farm with (20) S3+ B11 with a 24 port 10/100/1000 router. I have set them all on individual static ip. My question is: I mine altcoins mostly. Its REALLY time consuming to go in 20 times over and change the pool. Is there any way to change the pool ONCE, and affect them all? Also my firmware is back from August on all of them. Should I upgrade them all to antMiner_S320141126.bin? I heard the latest firmware slows speed to double digits. If this is not the best/fastest/stable one, which firmware is? Is there a modded unofficial firmware? I do alot of multipools too.

Vegas
legendary
Activity: 1666
Merit: 1185
dogiecoin.com
Does anyone else have S3's that show four (4) fans in "Miner Status?"

Yes it is entirely normal, all miners forever have shown 4 fan boxes. Please be more patient in the future, you posted 4x here and in the S4 threads as well overnight. Not everyone works on US time.
legendary
Activity: 1302
Merit: 1318
Technical Analyst/Trader
Does anyone else have S3's that show four (4) fans in "Miner Status?"
legendary
Activity: 1302
Merit: 1318
Technical Analyst/Trader
I think I know why my S3's will not RESET properly.

THEY LOADED THE WRONG SOFTWARE ONTO THIS RIG.

Both of these S3's have only 2 fans each because they are S3's.  However, the software looks like it is for the S4 because it will allow me to change the voltage AND the software has a reading for four (4) fans.  This rig only has two fans; it's an S3.

I BELIEVE THAT IS THE REASON THESE TWO (2) NEW S3's I PURCHASED WILL NOT RESET PROPERLY!  THE WRONG SOFTWARE INSTALLED ON THEM AT THE FACTORY!

legendary
Activity: 1302
Merit: 1318
Technical Analyst/Trader
Well, I switched back to the 2 other PCI-e ports I was using at first and now it's working.  I guess it was just some kind of glitch.

Oh Well...

False Alarm...
Pages:
Jump to: