Would 2 of these work in LAN to PC with a splitter?
I don't have access to the router
Topic: [Guide] Dogie's Comprehensive Bitmain Antminer S3 Setup [HD] - page 17. (Read 137777 times)
November 12, 2014, 12:31:16 PM
November 12, 2014, 05:59:41 AM
Any updates to how to find the firmware version? I keep getting 1+ Chips that fall offline and want to check firmware before pulling the machine apart for new Thermal Paste.
See the FAQ.
November 12, 2014, 03:04:43 AM
How long can we keep these miners running before we need to give them a rest??
They DON'T need a rest...only power and internet...
ZiG
Cheers.
How much data do they use from the net if left mining 24/7?
If I wanted to run two S3's what size pus would be best?
Negligible amounts of traffic with 512 difficulty set. CX 750 for 2 S3s
Many thanks Dogie. Much appreciated.
November 11, 2014, 08:42:41 PM
Any updates to how to find the firmware version? I keep getting 1+ Chips that fall offline and want to check firmware before pulling the machine apart for new Thermal Paste.
November 08, 2014, 05:51:38 PM
How long can we keep these miners running before we need to give them a rest??
They DON'T need a rest...only power and internet...
ZiG
Cheers.
How much data do they use from the net if left mining 24/7?
If I wanted to run two S3's what size pus would be best?
Negligible amounts of traffic with 512 difficulty set. CX 750 for 2 S3s
November 08, 2014, 04:57:33 PM
How long can we keep these miners running before we need to give them a rest??
They DON'T need a rest...only power and internet...
ZiG
Cheers.
How much data do they use from the net if left mining 24/7?
If I wanted to run two S3's what size pus would be best?
November 08, 2014, 04:41:27 PM
How long can we keep these miners running before we need to give them a rest??
They DON'T need a rest...only power and internet...
ZiG
November 08, 2014, 04:18:42 PM
How long can we keep these miners running before we need to give them a rest??
November 07, 2014, 05:16:50 AM
Are there any quiet fans I can replace the stock fans with? They are quite loud...
November 06, 2014, 08:07:10 PM
You should always write down the MAC address of the NIC you're connecting to for all S3s. Then look for it in the router to see the IP assigned.
November 06, 2014, 03:02:54 PM
Simple question, after I did the following •Change protocol to DHCP and click "Save & Apply". I can no longer get to the login screen when I type in 192.168.1.99. How do I go about logging into the settings?
See what IP your S3 has been given by looking at your router's device list then connect to that IP.
November 06, 2014, 01:40:36 PM
Simple question, after I did the following •Change protocol to DHCP and click "Save & Apply". I can no longer get to the login screen when I type in 192.168.1.99. How do I go about logging into the settings?
November 06, 2014, 12:33:36 PM
Hi I have a question?
Im mining on GHash.io first pool ive used to mine bitcoin in over 3 years ( ive mainly been mining alts and I used some of my profits to pick up this antminer ) so im well out of sync with whats what regarding asics and bitcoin
Ive been mining 6 hrs on the unit not over clocked and so far ive had 573 getworks, 2386 accepted shares, 4 rejects , 104hw, 6 utility. Unit is running at average of 454gh.
Do these figures look correct??
Im mining on GHash.io first pool ive used to mine bitcoin in over 3 years ( ive mainly been mining alts and I used some of my profits to pick up this antminer ) so im well out of sync with whats what regarding asics and bitcoin
Ive been mining 6 hrs on the unit not over clocked and so far ive had 573 getworks, 2386 accepted shares, 4 rejects , 104hw, 6 utility. Unit is running at average of 454gh.
Do these figures look correct??
Sounds fine.
November 06, 2014, 11:34:58 AM
Hi I have a question?
Im mining on GHash.io first pool ive used to mine bitcoin in over 3 years ( ive mainly been mining alts and I used some of my profits to pick up this antminer ) so im well out of sync with whats what regarding asics and bitcoin
Ive been mining 6 hrs on the unit not over clocked and so far ive had 573 getworks, 2386 accepted shares, 4 rejects , 104hw, 6 utility. Unit is running at average of 454gh.
Do these figures look correct??
Im mining on GHash.io first pool ive used to mine bitcoin in over 3 years ( ive mainly been mining alts and I used some of my profits to pick up this antminer ) so im well out of sync with whats what regarding asics and bitcoin
Ive been mining 6 hrs on the unit not over clocked and so far ive had 573 getworks, 2386 accepted shares, 4 rejects , 104hw, 6 utility. Unit is running at average of 454gh.
Do these figures look correct??
November 06, 2014, 03:58:15 AM
On the miner status screen what does discarded shares mean? Should that number be high?
Discarded shares mean nothing, that stat shouldn't really be shown. So yes, it will be high.
Thankyou.
November 06, 2014, 03:06:41 AM
On the miner status screen what does discarded shares mean? Should that number be high?
Discarded shares mean nothing, that stat shouldn't really be shown. So yes, it will be high.
November 06, 2014, 02:31:32 AM
On the miner status screen what does discarded shares mean? Should that number be high?
November 05, 2014, 03:08:43 PM
Hi can someone please help.
im doing all this
Alternative Subnet Change:
•Unplug your computer from all internet sources.
•Plug in an ethernet cable from the AntMiner to your computer.
•Navigate to Control Panel -> Network and Sharing Centre -> Change Adapter Settings.
•Right click on your ethernet adapter -> Properties.
•Click on "Internet Protocol Version 4" and click properties.
•Select "Use the following IP address" and enter the following:
•IP Address: 192.168.1.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.1.99.
•Plug in an ethernet cable from the AntMiner to you router.
•Restart the configuration instructions as above.
Then I go to the next part and plug the asic into my router, sign into the rig and change the dhcp setting and save.
I then have no connection to my internet or router.
Why is this? I cant perform the next steps. Please help im totally lost now
EDIT I got it working wirelessly sitting it righ next to my router.
Still not got a clue how to get it working on a wired connection
im doing all this
Alternative Subnet Change:
•Unplug your computer from all internet sources.
•Plug in an ethernet cable from the AntMiner to your computer.
•Navigate to Control Panel -> Network and Sharing Centre -> Change Adapter Settings.
•Right click on your ethernet adapter -> Properties.
•Click on "Internet Protocol Version 4" and click properties.
•Select "Use the following IP address" and enter the following:
•IP Address: 192.168.1.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.1.99.
•Plug in an ethernet cable from the AntMiner to you router.
•Restart the configuration instructions as above.
Then I go to the next part and plug the asic into my router, sign into the rig and change the dhcp setting and save.
I then have no connection to my internet or router.
Why is this? I cant perform the next steps. Please help im totally lost now
EDIT I got it working wirelessly sitting it righ next to my router.
Still not got a clue how to get it working on a wired connection
At •Plug in an ethernet cable from the AntMiner to you router. you reset your internet settings to normal.
Cheers, will give it a try a little later on.
November 05, 2014, 02:40:36 PM
Hi can someone please help.
im doing all this
Alternative Subnet Change:
•Unplug your computer from all internet sources.
•Plug in an ethernet cable from the AntMiner to your computer.
•Navigate to Control Panel -> Network and Sharing Centre -> Change Adapter Settings.
•Right click on your ethernet adapter -> Properties.
•Click on "Internet Protocol Version 4" and click properties.
•Select "Use the following IP address" and enter the following:
•IP Address: 192.168.1.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.1.99.
•Plug in an ethernet cable from the AntMiner to you router.
•Restart the configuration instructions as above.
Then I go to the next part and plug the asic into my router, sign into the rig and change the dhcp setting and save.
I then have no connection to my internet or router.
Why is this? I cant perform the next steps. Please help im totally lost now
EDIT I got it working wirelessly sitting it righ next to my router.
Still not got a clue how to get it working on a wired connection
im doing all this
Alternative Subnet Change:
•Unplug your computer from all internet sources.
•Plug in an ethernet cable from the AntMiner to your computer.
•Navigate to Control Panel -> Network and Sharing Centre -> Change Adapter Settings.
•Right click on your ethernet adapter -> Properties.
•Click on "Internet Protocol Version 4" and click properties.
•Select "Use the following IP address" and enter the following:
•IP Address: 192.168.1.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.1.99.
•Plug in an ethernet cable from the AntMiner to you router.
•Restart the configuration instructions as above.
Then I go to the next part and plug the asic into my router, sign into the rig and change the dhcp setting and save.
I then have no connection to my internet or router.
Why is this? I cant perform the next steps. Please help im totally lost now
EDIT I got it working wirelessly sitting it righ next to my router.
Still not got a clue how to get it working on a wired connection
At •Plug in an ethernet cable from the AntMiner to you router. you reset your internet settings to normal.
November 05, 2014, 09:17:13 AM
Hi can someone please help.
im doing all this
Alternative Subnet Change:
•Unplug your computer from all internet sources.
•Plug in an ethernet cable from the AntMiner to your computer.
•Navigate to Control Panel -> Network and Sharing Centre -> Change Adapter Settings.
•Right click on your ethernet adapter -> Properties.
•Click on "Internet Protocol Version 4" and click properties.
•Select "Use the following IP address" and enter the following:
•IP Address: 192.168.1.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.1.99.
•Plug in an ethernet cable from the AntMiner to you router.
•Restart the configuration instructions as above.
Then I go to the next part and plug the asic into my router, sign into the rig and change the dhcp setting and save.
I then have no connection to my internet or router.
Why is this? I cant perform the next steps. Please help im totally lost now
EDIT I got it working wirelessly sitting it righ next to my router.
Still not got a clue how to get it working on a wired connection
im doing all this
Alternative Subnet Change:
•Unplug your computer from all internet sources.
•Plug in an ethernet cable from the AntMiner to your computer.
•Navigate to Control Panel -> Network and Sharing Centre -> Change Adapter Settings.
•Right click on your ethernet adapter -> Properties.
•Click on "Internet Protocol Version 4" and click properties.
•Select "Use the following IP address" and enter the following:
•IP Address: 192.168.1.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.1.99.
•Plug in an ethernet cable from the AntMiner to you router.
•Restart the configuration instructions as above.
Then I go to the next part and plug the asic into my router, sign into the rig and change the dhcp setting and save.
I then have no connection to my internet or router.
Why is this? I cant perform the next steps. Please help im totally lost now
EDIT I got it working wirelessly sitting it righ next to my router.
Still not got a clue how to get it working on a wired connection
Jump to: