[GUIDE] GridSeed 5-Chip USB, Blade & Black Miner Support/Tuning

paramind22

hero member

Activity: 2786

Merit: 552

Quote from: hanz0n on January 28, 2024, 05:42:02 AM

Having some questions about the Gridseed blade 40chip verision,

Trying to get the BTC mode to work but the sha256 hashrate sucks compare to the chip spec.

In the datasheet gor the GC3355 u can se spec. https://github.com/gridseed/gc3355-doc/blob/master/GC3355_DataSheet.pdf

Quote

Key feature:
160 BTC Units
4 LTC Units
BTC mode up to 2.25G/s BTC Hash Rate, with 2.4W/GHash
LTC mode up to 60K/s LTC Hash Rate
Due-Coin mode up to 1.75G/s BTC Hash Rate + 60K/s LTC Hash Rate, or up to 2.25G/s BTC Hash
Rate + 38K LTC Hash Rate

How do i calculate the hashrate from that spec Huh

in my mind if a board has 40 chip and 1 chip has a hashrate in sha256 mode 2.25G the total for one board has to be around 80G ?

i only get 8-10G

I have a few of these. What pools/coins are you going to use them on?

hanz0n

newbie

Activity: 5

Merit: 1

Having some questions about the Gridseed blade 40chip verision,

Trying to get the BTC mode to work but the sha256 hashrate sucks compare to the chip spec.

In the datasheet gor the GC3355 u can se spec. https://github.com/gridseed/gc3355-doc/blob/master/GC3355_DataSheet.pdf

Quote

Key feature:
160 BTC Units
4 LTC Units
BTC mode up to 2.25G/s BTC Hash Rate, with 2.4W/GHash
LTC mode up to 60K/s LTC Hash Rate
Due-Coin mode up to 1.75G/s BTC Hash Rate + 60K/s LTC Hash Rate, or up to 2.25G/s BTC Hash
Rate + 38K LTC Hash Rate

How do i calculate the hashrate from that spec Huh

in my mind if a board has 40 chip and 1 chip has a hashrate in sha256 mode 2.25G the total for one board has to be around 80G ?

i only get 8-10G

goodgryphon

member

Activity: 111

Merit: 10

I have a gridseed blade single 40 chip, it has stoped lighting up the green light and has stopped turning in work, The #'s in cg miner look like it is hashing.
The red light just blinks once every second. Is there a porblem with the 5v circut? and is there an easy fix for this issue?

Florent12

newbie

Activity: 4

Merit: 0

It supports 28 Gridseed orbs running scrypt Only.

ramboacdc

newbie

Activity: 18

Merit: 0

Hi i was wondering if anyone could help me? I bought a gridseed 5 to use on slushpool but every time i connect it to the pool it says shares rejected as the difficulty too low. what is the best difficulty to set this to please so i stop getting so many rejections?

paramind22

hero member

Activity: 2786

Merit: 552

I have a problem where I am mining a scrypt coin and then restart to mine a SHA256 coin and doesn't seem to enter SHA256 mode and speed. I even unplugged both cords for about 30 seconds and this wouldn't restart it. Anyone have information on this?

dj_2012

newbie

Activity: 1

Merit: 0

Hey everyone I'm a Linux newbie and was able to get my hands on 4 of the old 3355 5 chips miners, so I got a PI and followed this guide: https://bitcointalksearch.org/topic/m.5305449

With effort I was able to do everything until I used this

Code:

sudo ./minerd  --gc3355=/dev/ttyACM0 --freq=800 --url=stratum+tcp://hash-to-coins.com:3333 --userpass=lulz:u

And did get an output with lots of yellow lines but when I go to the website to see my hash rate I see a big fat 0

1. I'm using and old computer power supply wonder if it has got enough juice https://postimg.org/image/qzo2e8cu5/

2. Run into some errors while installing the miner wonder if I got the right libs or controllers...

3.This is the output https://postimg.org/image/96h0cw807/

4. I'm using HUB and wonder if the that is reaching the miner

Really hope you can help guys feels really stupid having the gear, coming this far and not mining.

Nithmund

newbie

Activity: 6

Merit: 0

Hello...

I'm using a Lightning ASIC Gridseed 5-chip USB...
I'm using cgminer with Gridseed support... This is the version... https://github.com/ckolivas/cgminer
I'm running on a PC with Ubuntu as my OS...

What I need is how to tell cgminer where my Gridseed is located...

Could anyone please help me with a command line... or at least the part that will tell cgminer where my miner is?

I use this command line with cpuminer and it works but not well... So I'm hoping by switching to cgminer I'll get better results...

sudo ./minerd --freq=600 --gc3355=/dev/ttyACM0 --url=stratum+tcp://us.clevermining.com:3333 --userpass=19p1Prq7UZzf2XY9Wf42GJbxHvPVr2jLiw:x

Thanks in advance for any help...
Nithmund

Ntrain2k

hero member

Activity: 527

Merit: 500

HiveNet - Distributed Cloud Computing

Quote from: RBCastro on September 11, 2015, 03:42:00 PM

How do I set up more than 1 COM PORT on .bat file?

I have two gridseeds, my .bat is like that:

Code:

minerd.exe --dual --freq=800 --gc3355=COM5,COM2 -o stratum+tcp://POOL:PORT -u X.X -p X -t 1

But it is not working

Thanks

Having to work off of memory, so this might not be right.

--gc3355=COM5 --gc3355=COM2

RBCastro

member

Activity: 112

Merit: 10

How do I set up more than 1 COM PORT on .bat file?

I have two gridseeds, my .bat is like that:

Code:

minerd.exe --dual --freq=800 --gc3355=COM5,COM2 -o stratum+tcp://POOL:PORT -u X.X -p X -t 1

But it is not working

Thanks

unamis76

legendary

Activity: 1512

Merit: 1012

Quote from: Flep182 on April 07, 2015, 02:01:24 AM

Quote from: unamis76 on April 06, 2015, 05:45:32 PM

Quote from: TheRealSteve on April 06, 2015, 12:03:21 PM

http://es.aliexpress.com/item/Gridseed-USB-LTC-BTC-miner-9GH-300k-bitcoin-miner-litecoin-miner-USB-asic-miner-Collectibles-Christmas/32277412354.html?recommendVersion=1
The pictures in that listing are *awesome* Cheesy

Awesome indeed, but not sure if they're from the owner... The pictures come from the old Gridseed website and from a chinese forum Grin

One of those pictures is from a guy who said he had, if I'm not mistaken, 800 5 chip's...

Even 13,09 euro you're not going to earn back with that thing Wink

Yeah, pretty bad! Good old days when you made a nice buck with a few of these units

KoLamDuiT

newbie

Activity: 11

Merit: 0

Quote from: darkfriend77 on February 23, 2014, 09:59:04 AM

Any one worked out some details about the ... wiibox software ... ?

I did a translation of the web interface.

https://i.imgur.com/J1zcQGg.png

It seems a little empty in the GUI interface of the 2.02 version an overall hashrate and a single per miner hashrate would be a good start ....

gona dig into the software ...

1.Can you tell translate this software, this is not simple setting?
2.can u help me wiibox.net cant open in my country BLOCK, always Looking Up www.wiibox.net?
3.can iam mining with local area only, without connect to wiibox.net?

Flep182

legendary

Activity: 938

Merit: 1007

Quote from: unamis76 on April 06, 2015, 05:45:32 PM

Quote from: TheRealSteve on April 06, 2015, 12:03:21 PM

http://es.aliexpress.com/item/Gridseed-USB-LTC-BTC-miner-9GH-300k-bitcoin-miner-litecoin-miner-USB-asic-miner-Collectibles-Christmas/32277412354.html?recommendVersion=1
The pictures in that listing are *awesome* Cheesy

Awesome indeed, but not sure if they're from the owner... The pictures come from the old Gridseed website and from a chinese forum Grin

One of those pictures is from a guy who said he had, if I'm not mistaken, 800 5 chip's...

Even 13,09 euro you're not going to earn back with that thing Wink

unamis76

legendary

Activity: 1512

Merit: 1012

Quote from: TheRealSteve on April 06, 2015, 12:03:21 PM

http://es.aliexpress.com/item/Gridseed-USB-LTC-BTC-miner-9GH-300k-bitcoin-miner-litecoin-miner-USB-asic-miner-Collectibles-Christmas/32277412354.html?recommendVersion=1
The pictures in that listing are *awesome* Cheesy

Awesome indeed, but not sure if they're from the owner... The pictures come from the old Gridseed website and from a chinese forum Grin

One of those pictures is from a guy who said he had, if I'm not mistaken, 800 5 chip's...

TheRealSteve

hero member

Activity: 686

Merit: 500

FUN > ROI

http://es.aliexpress.com/item/Gridseed-USB-LTC-BTC-miner-9GH-300k-bitcoin-miner-litecoin-miner-USB-asic-miner-Collectibles-Christmas/32277412354.html?recommendVersion=1
The pictures in that listing are *awesome* Cheesy

kaltar

sr. member

Activity: 805

Merit: 250

yes you can with minera, i used to run 9 pods and 2 blade (4 boards ) all at different freq. you'll have to do some reading but i ran them with minera and cpu miner.
goodluck

Flep182

legendary

Activity: 938

Merit: 1007