HI
is there someone who can tell me how to run gridseed 5 chip and blade together?
Topic: [GUIDE] GridSeed 5-Chip USB, Blade & Black Miner Support/Tuning - page 2. (Read 308847 times)
March 06, 2015, 02:25:10 PM
December 10, 2014, 01:43:06 PM
K fixed the black. Opened it up and a ribbon cable was not connected. Also there is a USB plug to a daughterboard that was dangling in the back which needed to be plugged into the main controller board.
QUALITY CONTROL!!!!
QUALITY CONTROL!!!!
I just got my first Gridseed G-Black 25MH unit...
Is there ANY guide how to SETUP / RUN G-Black 25M box...
Any help is appreciated !
Thanks,
ZiG
October 12, 2014, 08:58:49 AM
Anyone know what size the fans are on the G-black?
September 21, 2014, 03:16:14 AM
Gridseeds LTC mining isnt even profitable soon, if price goes more down. The ones who made voltmods, how are you doing? Did you guys undo your mods to get better efficiency?
August 24, 2014, 04:56:49 PM
I was able to get zadig uninstalled but was not happy with bfgminer 4.6.0. I would like to try the cgminer 4.3.5 zeus gridseed fork. However when I run it i get this error.
gsd0 sendwork usb write err:(-12)
any ideas?
gsd0 sendwork usb write err:(-12)
any ideas?
August 21, 2014, 12:52:44 AM
Hello
I am trying to run bfgminer 4.6.0 I had previously ran cgminer 3.7.2 jmordica fork in Windows 7 64-bit. What is the best way to uninstall the zadig drivers?
Thanks,
BeerPimp
I am trying to run bfgminer 4.6.0 I had previously ran cgminer 3.7.2 jmordica fork in Windows 7 64-bit. What is the best way to uninstall the zadig drivers?
Thanks,
BeerPimp
July 31, 2014, 08:52:43 AM
Hello
On Gridseed G-Blade burned microcontroller stm32f103rct6, can anyone have firmware for it
On Gridseed G-Blade burned microcontroller stm32f103rct6, can anyone have firmware for it
July 29, 2014, 01:16:26 PM
K fixed the black. Opened it up and a ribbon cable was not connected. Also there is a USB plug to a daughterboard that was dangling in the back which needed to be plugged into the main controller board.
QUALITY CONTROL!!!!
QUALITY CONTROL!!!!
July 29, 2014, 12:21:00 PM
I don't know it you guys can help me but I bought a gridseed black 4u 25 M/Hs miner and it seems to be fucked out of the gate.
It came with a crazy Aus/China plug which is no biggie as I just replaced it with a North American one and it fired up. I can get into it but it can't detect any cards. According to the crazy google translation:
"quantities mining machine" is 0. so it can't detect any of the cards. Is it dead out of the box? Plus there are 6 red led's on the front. Is it because it's a 220 chinese power supply on a 120V N. American grid?
The power supply at the back says it can handle 100-240V so it should be fine theoretically.
Additionally I ordered 2 Gridseed blades with all the accessories and again the power supply came with a crazy Aus/China plug so I can't use it. Will an adapter work? Or should I just splice a normal power supply chord to it. What part of Canada did they think was in the world? WTF?
It came with a crazy Aus/China plug which is no biggie as I just replaced it with a North American one and it fired up. I can get into it but it can't detect any cards. According to the crazy google translation:
"quantities mining machine" is 0. so it can't detect any of the cards. Is it dead out of the box? Plus there are 6 red led's on the front. Is it because it's a 220 chinese power supply on a 120V N. American grid?
The power supply at the back says it can handle 100-240V so it should be fine theoretically.
Additionally I ordered 2 Gridseed blades with all the accessories and again the power supply came with a crazy Aus/China plug so I can't use it. Will an adapter work? Or should I just splice a normal power supply chord to it. What part of Canada did they think was in the world? WTF?
July 22, 2014, 06:27:12 PM
sorry if this sounds stupid, but could i get help to start mining with a gridseed blade please ? i have windows 64 bit.
i have the stm com port working,as i have been running 3 of the round gridseeds for quite a while now. my problem is i bought a Blade miner, but severely lack any nouce with computers, it actually took me 2 days to get my 3 round gridseeds running,
(don't lauagh) because i am literally useless on a pc. i have read this thread from start to finish(twice) (again dont laugh)and all i have now is a headache. i did manage to do the fiffo thing to clear up my miners though (YEAH). but unfortunately i can only use basic command lines
(copy& paste)lol. i really want to run the g-blade on cpuminer, as i am familiar with it from using the round gridseeds. i have downloaded from the links in the thread, but got so confused that i had to uninstall everything and start fresh. i still have the stm drivers installed and also this cpuminer-GC3355-win32-fixed-OC that i downloaded from Cryptomining Blog. and it runs fantastic with the round gridseeds.
i am able to solo mine and pool mine flawlessly. so thank you Sandor for your hard work. i'm just not sure where to download the latest version for the G-Blades, and the ones that i did download from drop box had .json or something. then i was lost
it all looks like a different language to me. i thought i would be able to grasp all this, but now fear i will not be able to mine with my new G-Blade because i lack the understanding. again sorry if it sounds stupid but i really am a slow learner when it comes to computers. thank you to all the people who share thier knowledge here. i look forward to reply's that i may get. thank you for your time. 
i have the stm com port working,as i have been running 3 of the round gridseeds for quite a while now. my problem is i bought a Blade miner, but severely lack any nouce with computers, it actually took me 2 days to get my 3 round gridseeds running,
(don't lauagh) because i am literally useless on a pc. i have read this thread from start to finish(twice) (again dont laugh)and all i have now is a headache. i did manage to do the fiffo thing to clear up my miners though (YEAH). but unfortunately i can only use basic command lines (copy& paste)lol. i really want to run the g-blade on cpuminer, as i am familiar with it from using the round gridseeds. i have downloaded from the links in the thread, but got so confused that i had to uninstall everything and start fresh. i still have the stm drivers installed and also this cpuminer-GC3355-win32-fixed-OC that i downloaded from Cryptomining Blog. and it runs fantastic with the round gridseeds.
i am able to solo mine and pool mine flawlessly. so thank you Sandor for your hard work. i'm just not sure where to download the latest version for the G-Blades, and the ones that i did download from drop box had .json or something. then i was lost
it all looks like a different language to me. i thought i would be able to grasp all this, but now fear i will not be able to mine with my new G-Blade because i lack the understanding. again sorry if it sounds stupid but i really am a slow learner when it comes to computers. thank you to all the people who share thier knowledge here. i look forward to reply's that i may get. thank you for your time. Try this ...:
https://bitcointalk.org/index.php?topic=576784.540
ZiG
July 22, 2014, 09:28:10 AM
sorry if this sounds stupid, but could i get help to start mining with a gridseed blade please ? i have windows 64 bit.
i have the stm com port working,as i have been running 3 of the round gridseeds for quite a while now. my problem is i bought a Blade miner, but severely lack any nouce with computers, it actually took me 2 days to get my 3 round gridseeds running,(don't lauagh) because i am literally useless on a pc. i have read this thread from start to finish(twice) (again dont laugh)and all i have now is a headache. i did manage to do the fiffo thing to clear up my miners though (YEAH). but unfortunately i can only use basic command lines
(copy& paste)lol. i really want to run the g-blade on cpuminer, as i am familiar with it from using the round gridseeds. i have downloaded from the links in the thread, but got so confused that i had to uninstall everything and start fresh. i still have the stm drivers installed and also this cpuminer-GC3355-win32-fixed-OC that i downloaded from Cryptomining Blog. and it runs fantastic with the round gridseeds.
i am able to solo mine and pool mine flawlessly. so thank you Sandor for your hard work. i'm just not sure where to download the latest version for the G-Blades, and the ones that i did download from drop box had .json or something. then i was lost it all looks like a different language to me. i thought i would be able to grasp all this, but now fear i will not be able to mine with my new G-Blade because i lack the understanding. again sorry if it sounds stupid but i really am a slow learner when it comes to computers. thank you to all the people who share thier knowledge here. i look forward to reply's that i may get. thank you for your time.
i have the stm com port working,as i have been running 3 of the round gridseeds for quite a while now. my problem is i bought a Blade miner, but severely lack any nouce with computers, it actually took me 2 days to get my 3 round gridseeds running,
(don't lauagh) because i am literally useless on a pc. i have read this thread from start to finish(twice) (again dont laugh)and all i have now is a headache. i did manage to do the fiffo thing to clear up my miners though (YEAH). but unfortunately i can only use basic command lines (copy& paste)lol. i really want to run the g-blade on cpuminer, as i am familiar with it from using the round gridseeds. i have downloaded from the links in the thread, but got so confused that i had to uninstall everything and start fresh. i still have the stm drivers installed and also this cpuminer-GC3355-win32-fixed-OC that i downloaded from Cryptomining Blog. and it runs fantastic with the round gridseeds.
i am able to solo mine and pool mine flawlessly. so thank you Sandor for your hard work. i'm just not sure where to download the latest version for the G-Blades, and the ones that i did download from drop box had .json or something. then i was lost
it all looks like a different language to me. i thought i would be able to grasp all this, but now fear i will not be able to mine with my new G-Blade because i lack the understanding. again sorry if it sounds stupid but i really am a slow learner when it comes to computers. thank you to all the people who share thier knowledge here. i look forward to reply's that i may get. thank you for your time. Try this ...:
https://bitcointalk.org/index.php?topic=576784.540
ZiG
July 22, 2014, 02:21:15 AM
sorry if this sounds stupid, but could i get help to start mining with a gridseed blade please ? i have windows 64 bit.
i have the stm com port working,as i have been running 3 of the round gridseeds for quite a while now. my problem is i bought a Blade miner, but severely lack any nouce with computers, it actually took me 2 days to get my 3 round gridseeds running,(don't lauagh) because i am literally useless on a pc. i have read this thread from start to finish(twice) (again dont laugh)and all i have now is a headache. i did manage to do the fiffo thing to clear up my miners though (YEAH). but unfortunately i can only use basic command lines
(copy& paste)lol. i really want to run the g-blade on cpuminer, as i am familiar with it from using the round gridseeds. i have downloaded from the links in the thread, but got so confused that i had to uninstall everything and start fresh. i still have the stm drivers installed and also this cpuminer-GC3355-win32-fixed-OC that i downloaded from Cryptomining Blog. and it runs fantastic with the round gridseeds.
i am able to solo mine and pool mine flawlessly. so thank you Sandor for your hard work. i'm just not sure where to download the latest version for the G-Blades, and the ones that i did download from drop box had .json or something. then i was lost it all looks like a different language to me. i thought i would be able to grasp all this, but now fear i will not be able to mine with my new G-Blade because i lack the understanding. again sorry if it sounds stupid but i really am a slow learner when it comes to computers. thank you to all the people who share thier knowledge here. i look forward to reply's that i may get. thank you for your time.
i have the stm com port working,as i have been running 3 of the round gridseeds for quite a while now. my problem is i bought a Blade miner, but severely lack any nouce with computers, it actually took me 2 days to get my 3 round gridseeds running,
(don't lauagh) because i am literally useless on a pc. i have read this thread from start to finish(twice) (again dont laugh)and all i have now is a headache. i did manage to do the fiffo thing to clear up my miners though (YEAH). but unfortunately i can only use basic command lines (copy& paste)lol. i really want to run the g-blade on cpuminer, as i am familiar with it from using the round gridseeds. i have downloaded from the links in the thread, but got so confused that i had to uninstall everything and start fresh. i still have the stm drivers installed and also this cpuminer-GC3355-win32-fixed-OC that i downloaded from Cryptomining Blog. and it runs fantastic with the round gridseeds.
i am able to solo mine and pool mine flawlessly. so thank you Sandor for your hard work. i'm just not sure where to download the latest version for the G-Blades, and the ones that i did download from drop box had .json or something. then i was lost
it all looks like a different language to me. i thought i would be able to grasp all this, but now fear i will not be able to mine with my new G-Blade because i lack the understanding. again sorry if it sounds stupid but i really am a slow learner when it comes to computers. thank you to all the people who share thier knowledge here. i look forward to reply's that i may get. thank you for your time. July 13, 2014, 05:52:16 PM
Dear Guys,
i have a problem with 2 modded blade from zoomhash/sevengnomes.
It works for 5 days, then the first stopped and the day after the second stopped too.
The fan doesn't work and i have only red light on ( no green light ).
I can see tha blade in Hashra dashboard, it appears to mine at correct speed but it doesn't mine any share.
I assume that is power related issues, i changed the PSU and cables without good results ( the same psu with same cables works perfectly on gridseed 5 chip).
Contacted sevengnomes and i'm still waiting a reply after 2 days.....
Any ideas on how to resolve?
thanks in advance
Marco
i have a problem with 2 modded blade from zoomhash/sevengnomes.
It works for 5 days, then the first stopped and the day after the second stopped too.
The fan doesn't work and i have only red light on ( no green light ).
I can see tha blade in Hashra dashboard, it appears to mine at correct speed but it doesn't mine any share.
I assume that is power related issues, i changed the PSU and cables without good results ( the same psu with same cables works perfectly on gridseed 5 chip).
Contacted sevengnomes and i'm still waiting a reply after 2 days.....
Any ideas on how to resolve?
thanks in advance
Marco
think you SOL on that one i dont think they warranty them other then DOA and now no warranty from gridseed
What SOL means ?
I asked to support , they tells me that they can repair it... I don't want to lose more and more days , I have a local engineer that can try to repair it if they tell me what i have to do... Still waiting..
SOL = Shit Out of Luck!!
July 13, 2014, 01:32:10 PM
Hi, what command i have to added to startup string to obtain an output like the one below? I run CPUMiner with this string
Thanks in advance W_M
SOLVED: add --debug
Code:
./minerd --gc3355-autotune --freq=850 --gc3355-detect --gc3355-freq=6D903FA94857:1050,6D7727705148:1050,6D7A549E5650:1050 -o stratum+tcp://EU.coinmine.pw:1111 -u abc_miner -p abc --gc3355-timeout=900
Thanks in advance W_M
SOLVED: add --debug
Quote
[2014-07-13 18:25:21.669] Stratum detected new block
[2014-07-13 18:25:21.669] Dispatching new work to GC3355 threads
[2014-07-13 18:25:24.970] 2@1 1150MHz: Got nonce 3337e31c, Hash <= Htarget!
[2014-07-13 18:25:24.970] 2@1: 3504 steps until step counter restarts
[2014-07-13 18:25:25.054] 2@1: accepted 6230/6270 (99.36%) 96.8/484.0/2555.8 KH/s
[2014-07-13 18:25:27.885] API: Command: stats
[2014-07-13 18:25:28.138] 1@4 1125MHz: Got nonce ccd61337, Hash <= Htarget!
[2014-07-13 18:25:28.139] 1@4: restart step counter
[2014-07-13 18:25:28.223] 1@4: accepted 6204/6244 (99.36%) 95.2/482.7/2555.7 KH/s
[2014-07-13 18:25:28.471] 0@2 1150MHz: Got nonce 667061df, Hash <= Htarget!
[2014-07-13 18:25:28.472] 0@2: 2822 steps until step counter restarts
[2014-07-13 18:25:28.556] 0@2: accepted 6177/6202 (99.60%) 97.1/486.6/2555.7 KH/s
[2014-07-13 18:25:32.431] 1@2 1150MHz: Got nonce 66764a26, Hash <= Htarget!
[2014-07-13 18:25:32.432] 1@2: 206 steps until step counter restarts
[2014-07-13 18:25:32.672] New job_id: 8302 Diff: 341
[2014-07-13 18:25:32.672] Stratum detected new block
[2014-07-13 18:25:32.673] Dispatching new work to GC3355 threads
[2014-07-13 18:25:33.134] 1@2: accepted 6205/6245 (99.36%) 97.4/482.7/2555.7 KH/s
[2014-07-13 18:25:38.845] API: Command: stats
[2014-07-13 18:25:40.315] 4@4 875MHz: Got nonce ccd558e4, Hash <= Htarget!
[2014-07-13 18:25:40.315] 4@4: 3126 steps until step counter restarts
[2014-07-13 18:25:40.400] 4@4: accepted 4641/4660 (99.59%) 73.8/368.1/2556.1 KH/s
[2014-07-13 18:25:49.777] API: Command: stats
[2014-07-13 18:25:53.676] 1@0 1175MHz: Got nonce 001fc32a, Hash <= Htarget!
[2014-07-13 18:25:53.676] 1@0: 1462 steps until step counter restarts
[2014-07-13 18:25:53.759] 1@0: accepted 6206/6246 (99.36%) 99.6/482.7/2556.1 KH/s
[2014-07-13 18:25:58.421] 5@1 875MHz: Got nonce 33503626, Hash <= Htarget!
[2014-07-13 18:25:58.422] 5@1: restart step counter
[2014-07-13 18:25:58.509] 5@1: accepted 4662/4685 (99.51%) 74.1/368.4/2556.1 KH/s
[2014-07-13 18:26:0.803] API: Command: stats
[2014-07-13 18:26:5.652] 3@1 875MHz: Got nonce 335861f6, Hash <= Htarget!
[2014-07-13 18:26:5.652] 3@1: 3504 steps until step counter restarts
[2014-07-13 18:26:5.737] 3@1: accepted 4557/4577 (99.56%) 74.1/366.4/2556.2 KH/s
[2014-07-13 18:25:21.669] Dispatching new work to GC3355 threads
[2014-07-13 18:25:24.970] 2@1 1150MHz: Got nonce 3337e31c, Hash <= Htarget!
[2014-07-13 18:25:24.970] 2@1: 3504 steps until step counter restarts
[2014-07-13 18:25:25.054] 2@1: accepted 6230/6270 (99.36%) 96.8/484.0/2555.8 KH/s
[2014-07-13 18:25:27.885] API: Command: stats
[2014-07-13 18:25:28.138] 1@4 1125MHz: Got nonce ccd61337, Hash <= Htarget!
[2014-07-13 18:25:28.139] 1@4: restart step counter
[2014-07-13 18:25:28.223] 1@4: accepted 6204/6244 (99.36%) 95.2/482.7/2555.7 KH/s
[2014-07-13 18:25:28.471] 0@2 1150MHz: Got nonce 667061df, Hash <= Htarget!
[2014-07-13 18:25:28.472] 0@2: 2822 steps until step counter restarts
[2014-07-13 18:25:28.556] 0@2: accepted 6177/6202 (99.60%) 97.1/486.6/2555.7 KH/s
[2014-07-13 18:25:32.431] 1@2 1150MHz: Got nonce 66764a26, Hash <= Htarget!
[2014-07-13 18:25:32.432] 1@2: 206 steps until step counter restarts
[2014-07-13 18:25:32.672] New job_id: 8302 Diff: 341
[2014-07-13 18:25:32.672] Stratum detected new block
[2014-07-13 18:25:32.673] Dispatching new work to GC3355 threads
[2014-07-13 18:25:33.134] 1@2: accepted 6205/6245 (99.36%) 97.4/482.7/2555.7 KH/s
[2014-07-13 18:25:38.845] API: Command: stats
[2014-07-13 18:25:40.315] 4@4 875MHz: Got nonce ccd558e4, Hash <= Htarget!
[2014-07-13 18:25:40.315] 4@4: 3126 steps until step counter restarts
[2014-07-13 18:25:40.400] 4@4: accepted 4641/4660 (99.59%) 73.8/368.1/2556.1 KH/s
[2014-07-13 18:25:49.777] API: Command: stats
[2014-07-13 18:25:53.676] 1@0 1175MHz: Got nonce 001fc32a, Hash <= Htarget!
[2014-07-13 18:25:53.676] 1@0: 1462 steps until step counter restarts
[2014-07-13 18:25:53.759] 1@0: accepted 6206/6246 (99.36%) 99.6/482.7/2556.1 KH/s
[2014-07-13 18:25:58.421] 5@1 875MHz: Got nonce 33503626, Hash <= Htarget!
[2014-07-13 18:25:58.422] 5@1: restart step counter
[2014-07-13 18:25:58.509] 5@1: accepted 4662/4685 (99.51%) 74.1/368.4/2556.1 KH/s
[2014-07-13 18:26:0.803] API: Command: stats
[2014-07-13 18:26:5.652] 3@1 875MHz: Got nonce 335861f6, Hash <= Htarget!
[2014-07-13 18:26:5.652] 3@1: 3504 steps until step counter restarts
[2014-07-13 18:26:5.737] 3@1: accepted 4557/4577 (99.56%) 74.1/366.4/2556.2 KH/s
July 12, 2014, 12:12:51 PM
Dear Guys,
i have a problem with 2 modded blade from zoomhash/sevengnomes.
It works for 5 days, then the first stopped and the day after the second stopped too.
The fan doesn't work and i have only red light on ( no green light ).
I can see tha blade in Hashra dashboard, it appears to mine at correct speed but it doesn't mine any share.
I assume that is power related issues, i changed the PSU and cables without good results ( the same psu with same cables works perfectly on gridseed 5 chip).
Contacted sevengnomes and i'm still waiting a reply after 2 days.....
Any ideas on how to resolve?
thanks in advance
Marco
i have a problem with 2 modded blade from zoomhash/sevengnomes.
It works for 5 days, then the first stopped and the day after the second stopped too.
The fan doesn't work and i have only red light on ( no green light ).
I can see tha blade in Hashra dashboard, it appears to mine at correct speed but it doesn't mine any share.
I assume that is power related issues, i changed the PSU and cables without good results ( the same psu with same cables works perfectly on gridseed 5 chip).
Contacted sevengnomes and i'm still waiting a reply after 2 days.....
Any ideas on how to resolve?
thanks in advance
Marco
this is a support/tuning thread for the blades not .... a vendor support thread (zoomhash or whatever) ....
July 11, 2014, 09:25:41 AM
Dear Guys,
i have a problem with 2 modded blade from zoomhash/sevengnomes.
It works for 5 days, then the first stopped and the day after the second stopped too.
The fan doesn't work and i have only red light on ( no green light ).
I can see tha blade in Hashra dashboard, it appears to mine at correct speed but it doesn't mine any share.
I assume that is power related issues, i changed the PSU and cables without good results ( the same psu with same cables works perfectly on gridseed 5 chip).
Contacted sevengnomes and i'm still waiting a reply after 2 days.....
Any ideas on how to resolve?
thanks in advance
Marco
i have a problem with 2 modded blade from zoomhash/sevengnomes.
It works for 5 days, then the first stopped and the day after the second stopped too.
The fan doesn't work and i have only red light on ( no green light ).
I can see tha blade in Hashra dashboard, it appears to mine at correct speed but it doesn't mine any share.
I assume that is power related issues, i changed the PSU and cables without good results ( the same psu with same cables works perfectly on gridseed 5 chip).
Contacted sevengnomes and i'm still waiting a reply after 2 days.....
Any ideas on how to resolve?
thanks in advance
Marco
think you SOL on that one i dont think they warranty them other then DOA and now no warranty from gridseed
What SOL means ?
I asked to support , they tells me that they can repair it... I don't want to lose more and more days , I have a local engineer that can try to repair it if they tell me what i have to do... Still waiting..
July 11, 2014, 08:41:39 AM
Dear Guys,
i have a problem with 2 modded blade from zoomhash/sevengnomes.
It works for 5 days, then the first stopped and the day after the second stopped too.
The fan doesn't work and i have only red light on ( no green light ).
I can see tha blade in Hashra dashboard, it appears to mine at correct speed but it doesn't mine any share.
I assume that is power related issues, i changed the PSU and cables without good results ( the same psu with same cables works perfectly on gridseed 5 chip).
Contacted sevengnomes and i'm still waiting a reply after 2 days.....
Any ideas on how to resolve?
thanks in advance
Marco
i have a problem with 2 modded blade from zoomhash/sevengnomes.
It works for 5 days, then the first stopped and the day after the second stopped too.
The fan doesn't work and i have only red light on ( no green light ).
I can see tha blade in Hashra dashboard, it appears to mine at correct speed but it doesn't mine any share.
I assume that is power related issues, i changed the PSU and cables without good results ( the same psu with same cables works perfectly on gridseed 5 chip).
Contacted sevengnomes and i'm still waiting a reply after 2 days.....
Any ideas on how to resolve?
thanks in advance
Marco
think you SOL on that one i dont think they warranty them other then DOA and now no warranty from gridseed
July 11, 2014, 08:37:09 AM
Dear Guys,
i have a problem with 2 modded blade from zoomhash/sevengnomes.
It works for 5 days, then the first stopped and the day after the second stopped too.
The fan doesn't work and i have only red light on ( no green light ).
I can see tha blade in Hashra dashboard, it appears to mine at correct speed but it doesn't mine any share.
I assume that is power related issues, i changed the PSU and cables without good results ( the same psu with same cables works perfectly on gridseed 5 chip).
Contacted sevengnomes and i'm still waiting a reply after 2 days.....
Any ideas on how to resolve?
thanks in advance
Marco
i have a problem with 2 modded blade from zoomhash/sevengnomes.
It works for 5 days, then the first stopped and the day after the second stopped too.
The fan doesn't work and i have only red light on ( no green light ).
I can see tha blade in Hashra dashboard, it appears to mine at correct speed but it doesn't mine any share.
I assume that is power related issues, i changed the PSU and cables without good results ( the same psu with same cables works perfectly on gridseed 5 chip).
Contacted sevengnomes and i'm still waiting a reply after 2 days.....
Any ideas on how to resolve?
thanks in advance
Marco
July 08, 2014, 05:54:13 PM
why even bother BTC mining is it even worth it anymore?
July 08, 2014, 05:27:11 PM
until now the only way im dual mining with a rasberrypi is with HASHRA. Tried all version and this one is the best imho.
Otherwise in Windows it works too, with cgminer (BTC) and cpuminer (scrypt)
but both way, after a few hours it crash and need to be restarted. Only Hashra offer a way to restart miner with a timer.
Any people can leave theyr Gridseed in dual mode for weeks without crash? Its seems its only possible in scrypt mode
Otherwise in Windows it works too, with cgminer (BTC) and cpuminer (scrypt)
but both way, after a few hours it crash and need to be restarted. Only Hashra offer a way to restart miner with a timer.
Any people can leave theyr Gridseed in dual mode for weeks without crash? Its seems its only possible in scrypt mode
Just restart every two hours using a cronjob.
Jump to: