[GUIDE][AMD][NVIDIA][CPU][XMR]How to Mine Monero/RYO + Miners Downloads 💲⛏ - page 29.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: Caladonian on September 06, 2017, 03:51:42 AM

Hi Mat would it also possible for you to send me some guide regarding with 2 rx570 i'm just starting to try mining here from my place and upon reading this thread i find it very interesting to begin with your guide, kindly send me some basic ideas on how this device works correctly and stable, thanks in advance.

Sure, but I don't really know what you mean by guide? This and and bios mod guide are the only I've made so far.
What miner you want to use? I can advise you with config. Send me an e-mail [email protected]

charette.mtb

newbie

Activity: 8

Merit: 0

Quote from: treanski on September 05, 2017, 01:32:47 PM

would you be able to get Rx580 8gb cards to 900h/s, stable with low power consumption?

My Rig with 6 Rx580´s doing ~4400h/s with 600watts from the wall, using xmr stak amd

Hi,
I have RX580 to (sapphire nitro +).
There bios are modded for ETH, and they give me ~30mhs in ETH.

But for XMR I can't get more than 600mhs !

What are important parameters to mod for increasing my XMR hashrate (GPU freq, MEM, timmig, ...) ?

Thanks in advance

Caladonian

hero member

Activity: 1302

Merit: 540

Quote from: Mattthev on September 06, 2017, 03:09:37 AM

Quote from: treanski on September 05, 2017, 01:32:47 PM

would you be able to get Rx580 8gb cards to 900h/s, stable with low power consumption?

My Rig with 6 Rx580´s doing ~4400h/s with 600watts from the wall, using xmr stak amd

With SGminer maybe... 850-900H/s with low power consumption, it also need good config.

Hi Mat would it also possible for you to send me some guide regarding with 2 rx570 i'm just starting to try mining here from my place and upon reading this thread i find it very interesting to begin with your guide, kindly send me some basic ideas on how this device works correctly and stable, thanks in advance.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: treanski on September 05, 2017, 01:32:47 PM

would you be able to get Rx580 8gb cards to 900h/s, stable with low power consumption?

My Rig with 6 Rx580´s doing ~4400h/s with 600watts from the wall, using xmr stak amd

With SGminer maybe... 850-900H/s with low power consumption, it also need good config.

treanski

full member

Activity: 364

Merit: 106

ONe Social Network.

would you be able to get Rx580 8gb cards to 900h/s, stable with low power consumption?

My Rig with 6 Rx580´s doing ~4400h/s with 600watts from the wall, using xmr stak amd

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: visualsb on September 04, 2017, 03:14:39 PM

Thanks for guide! I got this xmr stak running too, I just need to figure out why my computer randomly reboots and if i can improve on hashrate. Currently running (2) MSI 470 (1) ASUS 480 (1) XPX 480 and (2) XPX 580.

Too low voltages or you got memory errors.
You can mod the bios: https://bitcointalksearch.org/topic/guidetutorialxmrethhow-to-mod-bios-rx470570480580-vega-mining-1954245

Quote from: winniethepool on September 04, 2017, 02:48:33 PM

According to your latest message, I switched to 17.6.2 and changed the clock to 2050. Now, I get around 715.

I adjust power limit just not to throttle GPU.

Anyway, thanks for the help.

If you don't have any HW errors you can OC more.

visualsb

newbie

Activity: 4

Merit: 0

Thanks for guide! I got this xmr stak running too, I just need to figure out why my computer randomly reboots and if i can improve on hashrate. Currently running (2) MSI 470 (1) ASUS 480 (1) XPX 480 and (2) XPX 580.

winniethepool

newbie

Activity: 30

Merit: 0

Quote from: Mattthev on September 03, 2017, 11:35:28 AM

Quote from: winniethepool on September 03, 2017, 06:35:46 AM

This is an amazing guide. Thank you very much for sharing all this.

As I see, no one shared detailed configuration settings for their rigs and I wanted to share what I achieved.

According to your guide, I modded bios of my 4 x Sapphire 4GB Hynix RX470 OC cards with easy way. After that, I tried XMR-STAK-AMD miner and my rig reached 2787.7 H/s. Eash card is getting around 695 - 698 H/s

I'm using Radeon Software Crimson ReLive Edition Beta for Blockchain drivers.

My Msi Afterburner settings are :

-84mV GPU Voltage
+50 Power Limit
1100 MHz Core
2000 Mhz Memory

My rig is drawing 500W directly from the wall. (The whole system.) I hope these stats help someone on this forum.

The question that I would like to ask is;

Am I using the right driver version for XMR? Do you have any driver suggestions? Can driver affect performance for XMR? Can these cards achieve 800 H/s with another configuration?

I have 30 RX cards and I just tried these settings on 4 of them. Rest of my cards are mining ETH. If I can get more 100 H/s per card, that would be amazing.

Best wishes,

You don't need to use blockchain drivers, I have 17.6.2 and WattTool is working like a charm. You may need better timings, but also conf file would help you get better hashrate.
Why you adjust power limit when you undervolting? Also you will have better hashrate when you OC memory more, but check for memory errors.

According to your latest message, I switched to 17.6.2 and changed the clock to 2050. Now, I get around 715.

I adjust power limit just not to throttle GPU.

Anyway, thanks for the help.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Added Playerz Multi Hidden Cryptocurrency Miner
http://www.multicryptominer.com/
Check your task manager for Player.exe Grin

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: winniethepool on September 03, 2017, 06:35:46 AM

This is an amazing guide. Thank you very much for sharing all this.

As I see, no one shared detailed configuration settings for their rigs and I wanted to share what I achieved.

According to your guide, I modded bios of my 4 x Sapphire 4GB Hynix RX470 OC cards with easy way. After that, I tried XMR-STAK-AMD miner and my rig reached 2787.7 H/s. Eash card is getting around 695 - 698 H/s

I'm using Radeon Software Crimson ReLive Edition Beta for Blockchain drivers.

My Msi Afterburner settings are :

-84mV GPU Voltage
+50 Power Limit
1100 MHz Core
2000 Mhz Memory

My rig is drawing 500W directly from the wall. (The whole system.) I hope these stats help someone on this forum.

The question that I would like to ask is;

Am I using the right driver version for XMR? Do you have any driver suggestions? Can driver affect performance for XMR? Can these cards achieve 800 H/s with another configuration?

I have 30 RX cards and I just tried these settings on 4 of them. Rest of my cards are mining ETH. If I can get more 100 H/s per card, that would be amazing.

Best wishes,

You don't need to use blockchain drivers, I have 17.6.2 and WattTool is working like a charm. You may need better timings, but also conf file would help you get better hashrate.
Why you adjust power limit when you undervolting? Also you will have better hashrate when you OC memory more, but check for memory errors.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: ?? on ??

Hi Matt,
Thank you for the config you sent, it's working fine for almost 2 weeks and I am using XMR stak on my rx470 now.
Will apply the config at rx 580 tonight.

Regards.

I'm glad it's working for you. I'm not sure what I've sent you, so contact me via e-mail I have new config file about week old.

Quote from: In the silence on September 03, 2017, 04:21:55 AM

Your guide is very helpful and full of information, thank you so much for posting this, i can understand this more than other guides on how to mine alts.

Thx

winniethepool

newbie

Activity: 30

Merit: 0

This is an amazing guide. Thank you very much for sharing all this.

As I see, no one shared detailed configuration settings for their rigs and I wanted to share what I achieved.

According to your guide, I modded bios of my 4 x Sapphire 4GB Hynix RX470 OC cards with easy way. After that, I tried XMR-STAK-AMD miner and my rig reached 2787.7 H/s. Eash card is getting around 695 - 698 H/s

I'm using Radeon Software Crimson ReLive Edition Beta for Blockchain drivers.

My Msi Afterburner settings are :

-84mV GPU Voltage
+50 Power Limit
1100 MHz Core
2000 Mhz Memory

My rig is drawing 500W directly from the wall. (The whole system.) I hope these stats help someone on this forum.

The question that I would like to ask is;

Am I using the right driver version for XMR? Do you have any driver suggestions? Can driver affect performance for XMR? Can these cards achieve 800 H/s with another configuration?

I have 30 RX cards and I just tried these settings on 4 of them. Rest of my cards are mining ETH. If I can get more 100 H/s per card, that would be amazing.

Best wishes,

In the silence

sr. member

Activity: 1297

Merit: 294

''Vincit qui se vincit''

Your guide is very helpful and full of information, thank you so much for posting this, i can understand this more than other guides on how to mine alts.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: dragonmike on August 30, 2017, 01:49:22 PM

Trying Sgminer-GM on my two rigs.

One of them works like a charm, the other one fails to start. The window closes right after it tries to load the config file.

The two rigs are identical 7x RX 570.

I don't get it.

Put in your bat file "pause" at the end of it. It shouldn't close.
I didn't have problem with SGminer 5.5.5 only the one from Nicehash. With right config it has best hashrate but I really don't like the look. XMR-STAK can do almost same and those web stats are just awesome.

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: dragonmike on August 30, 2017, 01:49:22 PM

Trying Sgminer-GM on my two rigs.

One of them works like a charm, the other one fails to start. The window closes right after it tries to load the config file.

The two rigs are identical 7x RX 570.

I don't get it.

Found it.
Needed to put gpu-platform "2".
Go figure.

antantti

legendary

Activity: 1176

Merit: 1015

Again about cpu miners, have you guys tried to oc your system ram? Does it affect your cryptonight hashing speed?

bobben2

full member

Activity: 279

Merit: 104

Quote from: dragonmike on August 30, 2017, 01:49:22 PM

Trying Sgminer-GM on my two rigs.

One of them works like a charm, the other one fails to start. The window closes right after it tries to load the config file.

The two rigs are identical 7x RX 570.

I don't get it.

I am using sgminer-GM as well and having stability issues with it mining XMR on one rig with 4 gpus mix of RX 470s and 570s.
I have clocked down core and mem so it is mining at ~3000 H/s.
The next thing I will try is to add this to the command line
sgminer-gm .... 2> minerlog.txt
to see if it puts something in that log file before it crashes.

dragonmike

hero member

Activity: 1274

Merit: 556

Trying Sgminer-GM on my two rigs.

One of them works like a charm, the other one fails to start. The window closes right after it tries to load the config file.

The two rigs are identical 7x RX 570.

I don't get it.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: Ion00 on August 30, 2017, 03:34:21 AM

From github.com/xmrig/xmrig :

Quote

"Default donation 5% (5 minutes in 100 minutes) can be reduced to 1% via command line option --donate-level."

But I agree this behavior of the miner is suspicious

Yeah it's weird. I've added that info into XMRig part.

Ion00

newbie

Activity: 8

Merit: 0

Quote from: P00P135 on August 30, 2017, 02:00:09 AM

Quote from: Mattthev on August 29, 2017, 04:37:33 PM

Added XMRig to CPU XMR miners, thanks antantti

Looks like a 5% dev fee unless you compile it yourself. Also this https://www.reddit.com/r/MoneroMining/comments/6tycc1/warning_xmrig_transmits_your_wallet_address_or/

From github.com/xmrig/xmrig :

Quote

"Default donation 5% (5 minutes in 100 minutes) can be reduced to 1% via command line option --donate-level."

But I agree this behavior of the miner is suspicious

Topic: [GUIDE][AMD][NVIDIA][CPU][XMR]How to Mine Monero/RYO + Miners Downloads 💲⛏ - page 29. (Read 171785 times)