Your links are totally useless for Vega64 with blockchain drivers and contain long miner redirection virus. Total bullshit
What virus? It's javascript miner and it's stated there. I got at least some tips from that. I don't have any Vega so you might do a guide and I will add it to first post or point it to your post. What is bullshit about that? I'm pretty sure that the reddit post was one of the first and it contains all the info you need for setting Vega 64 to mine more effectively. 
Topic: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 41. (Read 220957 times)
September 23, 2017, 03:58:34 PM
September 23, 2017, 03:46:32 PM
Added links for flashing and modding VEGA 56/64
Your links are totally useless for Vega64 with blockchain drivers and contain long miner redirection virus. Total bullshit September 23, 2017, 09:42:24 AM
Added links for flashing and modding VEGA 56/64
September 23, 2017, 09:23:10 AM
Hi,
Says Mal can someone here adapt a guide to the Vega 56 and Vega 64?
Somehow I have my problems.
thank you
You may refer to reddit post https://cnhv.co/oab Says Mal can someone here adapt a guide to the Vega 56 and Vega 64?
Somehow I have my problems.
thank you
September 23, 2017, 05:29:30 AM
Hi,
Says Mal can someone here adapt a guide to the Vega 56 and Vega 64?
Somehow I have my problems.
thank you
1950+h/s with 150wattSays Mal can someone here adapt a guide to the Vega 56 and Vega 64?
Somehow I have my problems.
thank you
https://bitcointalksearch.org/topic/m.21988515
with extra bonus guides howto get
1) 160-200watt 44.2 with ETH
2) 280-300watt 43eth+220lbc
3) 240-260watt 41eth+200lbc
September 23, 2017, 03:39:45 AM
Hi,
Says Mal can someone here adapt a guide to the Vega 56 and Vega 64?
Somehow I have my problems.
thank you
Says Mal can someone here adapt a guide to the Vega 56 and Vega 64?
Somehow I have my problems.
thank you
September 22, 2017, 08:35:34 AM
Hi All!
I got one modded BIOS for my "Asus ROG STRIX RX 580 O8G GAMING" card (I saved my BIOS, uploaded to a website and got one back from a modder). BUT without checking what exactly he had modified, I doesn't want to flash it, so I compared with SRBPolaris V3 my stock BIOS version with the modded one.
This is what he has done:
- copied the memory timing of 1750 into 2000 strap
- changed the GPU default frequency from 1360Mhz to 1088Mhz
- changed the Memory default frequency from 2000MHz to 2140Mhz
- changed the Max Power limit from 180W to 160W in PowerTune
- changed the TDP from 145W to 122W in PowerTune
- changed the TDC from 149A to 126A
What do you guys think? Is this so OK if I want a little bit more hashrate and less power draw, with stable long term mining?
Thx a lot
I got one modded BIOS for my "Asus ROG STRIX RX 580 O8G GAMING" card (I saved my BIOS, uploaded to a website and got one back from a modder). BUT without checking what exactly he had modified, I doesn't want to flash it, so I compared with SRBPolaris V3 my stock BIOS version with the modded one.
This is what he has done:
- copied the memory timing of 1750 into 2000 strap
- changed the GPU default frequency from 1360Mhz to 1088Mhz
- changed the Memory default frequency from 2000MHz to 2140Mhz
- changed the Max Power limit from 180W to 160W in PowerTune
- changed the TDP from 145W to 122W in PowerTune
- changed the TDC from 149A to 126A
What do you guys think? Is this so OK if I want a little bit more hashrate and less power draw, with stable long term mining?
Thx a lot
September 20, 2017, 01:11:17 PM
Added: Link to Basic Performance Timings for Elpida/Hynix/Micron/Samsung
September 20, 2017, 10:11:46 AM
Note: Proof of Work shortlinks are now blocked by some antiviruses, disable them for few minutes or the links won't work.
September 20, 2017, 03:12:16 AM
Help! I wrote over the Silent bios for my Nitro+ 570 8gb Hynix card. Does anyone have a copy? I really need it!!
Use VGA bios databse: https://www.techpowerup.com/vgabios/193806/193806Or the Anorak's...
September 19, 2017, 09:33:15 AM
Help! I wrote over the Silent bios for my Nitro+ 570 8gb Hynix card. Does anyone have a copy? I really need it!!
Look that https://anorak.tech/t/sapphire-nitro-rx-570-8gb-hynix/15876
September 19, 2017, 08:44:59 AM
Help! I wrote over the Silent bios for my Nitro+ 570 8gb Hynix card. Does anyone have a copy? I really need it!!
September 19, 2017, 04:26:03 AM
Hi,
I followed the tutorial and now I get around 29.3 mh/s, but I also have a lot of memory errors.
Could someone share their Config for one of those cards?
RX480 MSI Gaming X 8GB (Samsung)
RX470 Nitro 8GB (Micron)
RX470 Nitro + 8GB (Samsung)
You may try Uber-mix 3.2, I also have better Samsung timings. Or lower memory clocks.I followed the tutorial and now I get around 29.3 mh/s, but I also have a lot of memory errors.
Could someone share their Config for one of those cards?
RX480 MSI Gaming X 8GB (Samsung)
RX470 Nitro 8GB (Micron)
RX470 Nitro + 8GB (Samsung)
I followed the tutorial and got about 28.5 mh/s for Each card individually. When I connect all cards I get no video signal.
Installed an older driver (16.9) with ddu and did anything I could think of. Now I get one card 28 and the other one 4 because it only runs on 300 mhz. The others still dont work together.
Do you have an idea what I did wrong or have an Image for One of those cards?
Rx470 nitro 8gb micron
Rx470 nitro + 8 gb samsung
Rx480 msi gaming x 8gb samsung
Thank you so much for your help!
September 18, 2017, 02:33:34 PM
Hi,
I followed the tutorial and now I get around 29.3 mh/s, but I also have a lot of memory errors.
Could someone share their Config for one of those cards?
RX480 MSI Gaming X 8GB (Samsung)
RX470 Nitro 8GB (Micron)
RX470 Nitro + 8GB (Samsung)
You may try Uber-mix 3.2, I also have better Samsung timings. Or lower memory clocks. I followed the tutorial and now I get around 29.3 mh/s, but I also have a lot of memory errors.
Could someone share their Config for one of those cards?
RX480 MSI Gaming X 8GB (Samsung)
RX470 Nitro 8GB (Micron)
RX470 Nitro + 8GB (Samsung)
September 18, 2017, 01:45:42 PM
Hi,
I followed the tutorial and now I get around 29.3 mh/s, but I also have a lot of memory errors.
Could someone share their Config for one of those cards?
RX480 MSI Gaming X 8GB (Samsung)
RX470 Nitro 8GB (Micron)
RX470 Nitro + 8GB (Samsung)
I followed the tutorial and now I get around 29.3 mh/s, but I also have a lot of memory errors.
Could someone share their Config for one of those cards?
RX480 MSI Gaming X 8GB (Samsung)
RX470 Nitro 8GB (Micron)
RX470 Nitro + 8GB (Samsung)
September 18, 2017, 08:21:39 AM
have you guys some recommendations for sgminer 5.5.5 rawintensity setting for
280/7950
280x/7970
290
290x
?
thanks
280/7950
280x/7970
290
290x
?
thanks
September 18, 2017, 07:32:04 AM
Updated: Links are now using Proof of Work Shortlinks.
September 17, 2017, 02:57:19 AM
I have red devil 570's...
Some hynix, mostly Elpida...
I used the Polaris Bios Editor 1-click patch, reduced the memory voltages to 900, and upped all my results by 10-15%...
Dropped all the temperatures and made everything more stable too... (had to change all my memory timings, but was worth it)
http://jays20.ethosdistro.com/
You also need OC the memory, most of your cards has only 27MH/s. Or better timings. Some hynix, mostly Elpida...
I used the Polaris Bios Editor 1-click patch, reduced the memory voltages to 900, and upped all my results by 10-15%...
Dropped all the temperatures and made everything more stable too... (had to change all my memory timings, but was worth it)
http://jays20.ethosdistro.com/
September 15, 2017, 07:52:43 AM
I have red devil 570's...
Some hynix, mostly Elpida...
I used the Polaris Bios Editor 1-click patch, reduced the memory voltages to 900, and upped all my results by 10-15%...
Dropped all the temperatures and made everything more stable too... (had to change all my memory timings, but was worth it)
http://jays20.ethosdistro.com/
Some hynix, mostly Elpida...
I used the Polaris Bios Editor 1-click patch, reduced the memory voltages to 900, and upped all my results by 10-15%...
Dropped all the temperatures and made everything more stable too... (had to change all my memory timings, but was worth it)
http://jays20.ethosdistro.com/
September 14, 2017, 10:45:48 AM
Hi,first of all thx for this guide Mattthev!
I finally managed to edit bios for my rx470 samsung memory cards after a dozen of hours of fail and try attempts,and cards are finaly showing properly in device manager without any code errors and stuff,got a small increse in hashrate cos i went for original starps,problem I m having now when i try to OC cards in AB. or in trixx nothing happens,no change are showing after hitting apply,like the cards are locked or something,tried couple of different betas of AB and trixx, same thing,any1 have posible solution to this mistery,thx?
EDIT:oh never mind me, now i see that i can change gpu clocks within a modded bios editor
,thx
Clean drivers with DDU, install new one. You might try new OverdrivenTool, link in first post. I finally managed to edit bios for my rx470 samsung memory cards after a dozen of hours of fail and try attempts,and cards are finaly showing properly in device manager without any code errors and stuff,got a small increse in hashrate cos i went for original starps,problem I m having now when i try to OC cards in AB. or in trixx nothing happens,no change are showing after hitting apply,like the cards are locked or something,tried couple of different betas of AB and trixx, same thing,any1 have posible solution to this mistery,thx?
EDIT:oh never mind me, now i see that i can change gpu clocks within a modded bios editor
,thxJump to: