Topic: Haasonline Simple Trade Bot For BTCe and Bitstamp[Main topic] - page 87. (Read 416703 times)

it is not 98% of buying price , it is 98% of price X , X gets reset to the current price every Y amount of seconds , Y is set you in the box above the percent value in the advanced settings

hope this helps

I just don't understand drop loss feature. It's set up to be 98% of my buying price, yet it doesn't get executed at that price and drop-loss price on main window slides down with current price as it's base.

I think the problem is with fees amount being taken by Btc-e. I've bought few cents to keep as reserve and was able to sell manually, haven't yet made a trade with my indicators so we'll see how bot will react.

You could try this: Select the "All-in" for a moment. The trade-amount will be grayed and and it will show your wallet contents. If the number shown is bigger then the number you have set you should have no problems. It it doesn`t, select a different coin position.

This is good suggestion.

It looks I have general problems with selling, not only drop loss.

Whenever it tries to sell error appears, mostly that stupid one "It is not enough BTC / LTC in your account).

did you set the droploss reset timer to something low (under 45mins to me) if so it will reset to the % of the current price every X amount of seconds, try making the reset longer

Drop loss not getting executed here, went to sleep and found myself in solid losing position thinking this bot would help with that.

I don't have idea what is going on or if I'm doing something wrong here, you definitely need to add more documentation here.

Why is my caluclated drop loss price exactly my set % but of current price, not the one I bought at. And it's just keep going down as price is going down, no execution at all.

On the LTC side I had that famous selling error #not enough ltc in account" other people were complaining about. I just can't understand your explanation about that error. Why would exchange not accept 80 LTC trade??? It accepted it perfectly when bot was buying.

Feature Request:

When using the benchmark feature to test Indicator settings, can you add to the Summary results the total earnings amount of a "buy and hold" strategy for comparison purposes? That way we could compare our bot and indicators settings versus a "buy and hold" strategy.

I often run benchmarks and see a positive return for the total earnings, but wonder if the return would be more or less if I was just buying and holding for that same time period.

I have another Idea!

We have a box to enter a set amount or we can check all-in.  Can we have another option for 25%/50%/75%/etc. ? 

Price change indicator doesn't seem to be selling when profit is exceeded.  Stays yellow?

Found a nice combo of indicators...but if it wont sell...what's the point :-)

When you click the sell button.  Does that reset the last buy sell price if option is ticked in advanced settings?

@xpalax:
1. We are working on a even better solution. A few days ago we have setup a cache server. This server is polling prices (and building a history) as we speak now. The CTF files which i have posted before where the first files produced by this server. In the future we want to integrate this server in the Simple Trade Bot. Once we implement this (if it can be trusted) your bot will start with prices pre-loaded. So trading will start directly.

2. The profit number are broke at the benchmark, i know this. Due the implementation of all the advanced settings the profit does not get calculated in the right way. We will be solving this matter for the next update. Like i said, i pushed this update because of all the fixes.

3. Yes, thats one of the things on top of the list.

@kalross:
It is already doing that. The drop-loss price gets adjusted each X time. The adjustment is made based on the buy price (95% of it for example) so each X time the prices gets adjusted. This process goes up (of course) but it will go down too. Once the drop-loss kicks in your coins are sold, the sell price is high and in a few minutes the drop-loss goes down... the only thing you need to have working after this is a indicator that buys again in the low point of the crash.

You can try this technique with the CTF file i have posted, it contains a recording of the BTC crash of yesterday.


@alexuk:
The ROC uses a reference point and the current point in time to see if the curreny goes up or down. Based on the difference between the 2 point the ROC is calculated. This is the formula i have implemented behind this indicator:

RateOfChange = (currentTick - oldTick) / oldTick;

Or if you want to dive into the calculation and the signals, you can have a look at this page:
http://stockcharts.com/school/doku.php?id=chart_school:technical_indicators:rate_of_change_roc_a

The benchmarking will be improved at the next release, i will be adding the bot parameters to the benchmark form to make this work.

@silverston:
I have not posted this pages yet because they are in concept, but maybe if you have a look you will get a better understanding how to begin and how to setup some basic strategies.
http://www.haasonline.com/trading-strategies/
http://www.haasonline.com/trading-strategies-part-2/

TIP: Try the RSI first, maybe even combined with a price change indicator.

(My webhost may be a bit slow due the high load of downloads at the moment)

Edit:
There is more happening at my host right now, i am unsure what is going on (error 500?).

Hello does can not configure the bot for profit ... trying to different timeframes: 20, 40, 60, 120, 180 - no difference. tried to use different signals: in general, always gets less profit. Saved  several graphs for benchmark: results only in the negative.
Who can tell what the optimal settings are used for trade? I get the best profit when I trading manually)) I could not leave the bot to trade quietly, I am afraid of losing money. Trading on BTC-e. pairs USD/BTC and EUR/BTC.
Thanks

also - please create a third bot tab for benchmarking only - im getting a little tired of switching a active bot on/off to adjust my settings and fiddle....

@stephen224


Ive been playing with the ROC indicator.

Im trying to get the bot to BUY when there is a sudden high-rate drop in the market, and then sell when it begins to recover.

Ive setup my ROC to be "Buy at value 0.1" and "Sell at value -0.001" -- (this is the opposite of the defaults which are -0.001 and 0.001 respectively). It seems its inside the trigger levels at these values at all times, and doesnt "trigger" when i crosses the threshold.


From what i can tell, ROC only works in the opposite way i want it to, that is it wants to sell in a dip, and buy on a rise....

Is this clear? can you take a look into reversing it for me

I've not used it to trade...but it can be good on quick pump and dumps.  When the currency starts to rise fast you can set a Buy trigger and vice versa as the dump occurs.

I wouldn't recommend most pump and dumps...most get burned :-)

K

May we have an option to continue trading once the drop loss has been activated?

New features and fixes are great...the bot is feeling really good.

Thanks for all your work and support Stephan.

K

Can someone explain to me the use of the ROC (Rate of Change) indicator.  I cant seem to get it working with any bench marking I do.

@Stephan224

1) Would it be possible to get a dump of a .ctf file if we close the bot or change update timers? Also, as it was mentioned a better way to see individual intervals on the graphs?

2) It seems profit calculation is broken in benchmark with/without any advance settings.

3) Could we also get a way to save API and other information when moving to updates, please?
 
PS. Thank you for this program! Since I started trading again 40 days ago, my initial investment of ,at the time, 55$ worth of BTC I have made a profit of 6x that! I wholeheartedly support this bot, and will continue to use it while also daytrading manually.

sorry for the bad news but i believed this update may have messed with something
when i benchmark my files it seems as though the bot completely ignores the "last buy and sell reset timeout" my bot is trading at losses without waiting for the timer to run out

will be switching back to 9.0.6

anybody else having this issue or just me?

thanks for the great work though stephan

edit:typo

Wow... thanks

Alright, well i have some good news in return:

Version 0.9.0.7 beta of the Simple Trade Bot has been released.

The following changes are where implemented:
- Changed: BTCe API – The currency Ppc/Usd and Trc/Btc are added.
- Changed: The MACD-MA calculation has been improved.
- New: Advanced setting to reset the last buy and sell prices after a sell command.
- Fix: Issue with NOT selecting the second trade-bot is now solved.
- Fix: Price change -indicator fixed. (buy to soon issue)
- Fix: Stochastic oscillator -indicator fixed. (values reversed, translations reversed)
- Fix: Some profit calculation issues are solved when advanced settings where used, not all.
- Fix: BTC-China API – "Test" button at the settings form is fixed.

Known issue:
- While using one of the advanced settings, you can get some strange profit output numbers. This is a known issue and we are working on it.

I know not all reported issues are fixed, for example Cryptsy might be outdated with its coins. But still we released this new version to fix all the other reported issues first. Of course we are sorry for this and we will fix those other issues as soon as possible.

To get the update: go to www.haasonline.com, login at the My Account -page, and press the download link you used before.

To install: uninstall the old version first and install this update as a fresh install.

Something usefull: I have posted a second CTF package online with more recent prices and with a time interval of 5minutes (300sec). I repost this for the people who might have missed this link earlier.
http://www.haasonline.com/wp-content/uploads/2013/12/CTFPackage2.zip

Happy coin earning!