Pages:
Author

Topic: Hash Auger 2.9.7.5 Mining Manager and Switcher for NVIDIA GPUs - page 10. (Read 8803 times)

newbie
Activity: 481
Merit: 0
did not find a way to mine a single coin. it is possible  ?

There are currently two ways to mine a single coin in Hash Auger.  If you uncheck the Auto Switch GPUs setting on the Mine tab, you can use the lists in the GPU Coin area to select a pool and an algorithm/coin. The software will then mine only the selected algorithm/coin on all GPUs.  Most auto-exchange pools do not allow a specific coin to be mined except for Zergpool using the MC parameter.  But you can mine specific coins on the pools that do not auto-exchange.

Using the Pause Switching button, you can also keep mining the current algorithm/coin.  The software will not switch from the current work until you resume switching by pressing that button again.

sorry
but in that way can choose only the algo

not the coin/coins

for example i want to mine x16r  algo and coin rvn.

can select only x16 r but not the rvn

Which pool are you trying to use? Most auto-exchange pools such as Blazepool will not allow users to mine specific coins whether they are using HashAuger or something else. However, HashAuger also supports a number of pools that do not auto-exchange.  For example, yiimp.eu offers Raven.  If you add a wallet for your raven address in HA and assign it to yiimp, you will be able to mine Raven coin on that pool.
newbie
Activity: 481
Merit: 0
did not find a way to mine a single coin. it is possible  ?

There are currently two ways to mine a single coin in Hash Auger.  If you uncheck the Auto Switch GPUs setting on the Mine tab, you can use the lists in the GPU Coin area to select a pool and an algorithm/coin. The software will then mine only the selected algorithm/coin on all GPUs.  Most auto-exchange pools do not allow a specific coin to be mined except for Zergpool using the MC parameter.  But you can mine specific coins on the pools that do not auto-exchange.

Using the Pause Switching button, you can also keep mining the current algorithm/coin.  The software will not switch from the current work until you resume switching by pressing that button again.
newbie
Activity: 481
Merit: 0
It would be good to include t-rex miner.
And also wallets sorting would be nice (alfabetically)

Yes, T-Rex Miner support is in the works and I'll add your suggestion about sorting the wallets to my feature request list. Thanks.

I'm still working on T-Rex Miner support, but starting in version 2.0.2, wallets are listed alphabetically by name.
Ok. Is it hard to add phoenix? As far as it is the fastest ethash miner for nvidia.
Waiting for trex. On small rigs it jas no problems.
P.S. Are there any reports with problems on 9+gpu rigs? I wasnt able to get HA working on 10gpu rig. While there are no problems with normal mining when only 1 miner starts.

T-Rex is now supported in HA 2.0.3. Since Ethash has rarely been the most profitable algorithm for the GPUs that most HA users are using (even with automatic support of the EthEnlargementPill), adding another Ethminer has been low on my list of priorities. However, I will take a look at Phoenix to see if its speed improvement changes that equation.

While most users on the Discord channel have 8 or fewer GPUs per rig, there is at least one user who has 10 GPUs in their rig and the only issues they have had were due to aggressive overclocks.  Also, there are not any GPU limits programmed in the code that would prevent the software from working with a specific number of GPUs. What kind of errors are you seeing when you try to mine with HA on that rig?
newbie
Activity: 481
Merit: 0
Right on with the update app. Can you please add biblepay, blue coin, and green coin support please?

Thanks for the suggestions.  I'll add these to list of feature requests, although I have not yet seen these coins listed on the pools that HA currently supports.
full member
Activity: 728
Merit: 106
It would be good to include t-rex miner.
And also wallets sorting would be nice (alfabetically)

Yes, T-Rex Miner support is in the works and I'll add your suggestion about sorting the wallets to my feature request list. Thanks.

I'm still working on T-Rex Miner support, but starting in version 2.0.2, wallets are listed alphabetically by name.
Ok. Is it hard to add phoenix? As far as it is the fastest ethash miner for nvidia.
Waiting for trex. On small rigs it jas no problems.
P.S. Are there any reports with problems on 9+gpu rigs? I wasnt able to get HA working on 10gpu rig. While there are no problems with normal mining when only 1 miner starts.
newbie
Activity: 6
Merit: 0
Right on with the update app. Can you please add biblepay, blue coin, and green coin support please?
newbie
Activity: 481
Merit: 0
It would be good to include t-rex miner.
And also wallets sorting would be nice (alfabetically)

Yes, T-Rex Miner support is in the works and I'll add your suggestion about sorting the wallets to my feature request list. Thanks.

I'm still working on T-Rex Miner support, but starting in version 2.0.2, wallets are listed alphabetically by name.
newbie
Activity: 481
Merit: 0
hashauger

ethminer benchmark never worked in my rig

I am sorry to hear that Preda.  That is unusual since Ethminer is the last miner in the software that uses offline benchmarking, so it usually always calculates a hash rate.  If you try to benchmark Ethminer again, can you post the text from the Miners tab for that GPU?  Seeing the miner output would really help me identify the cause of the problem.  Since HA only benchmarks algorithms that are enabled and have not been benchmarked yet, if you press the Benchmark button for a GPU, Ethminer should be the first miner it tries to benchmark.
sr. member
Activity: 756
Merit: 250
hashauger

ethminer benchmark never worked in my rig


newbie
Activity: 481
Merit: 0

If the User Data folder does not exist, then the software is not reading your Track Earnings wallet setting correctly.  First, please upgrade to version 2.0.1 as I made some changes to improve how that works in the code.  If the problem still occurs, then try disabling Track Earnings on the wallet, save the wallet, restart HA, enable Track Earnings and save the wallet again.

done all that

after 10 minute working folder was created.
now i can see earnings tab!
thanks!

I am glad to hear it is now working for you. Thank you for your patience and assistance in troubleshooting.  Let me if you have any other questions or feedback.
newbie
Activity: 481
Merit: 0
It would be good to include t-rex miner.
And also wallets sorting would be nice (alfabetically)

Yes, T-Rex Miner support is in the works and I'll add your suggestion about sorting the wallets to my feature request list. Thanks.
newbie
Activity: 481
Merit: 0
I have to back to prev version it doesn't start idk the why just don't start

And it says one instance of hashauger is already running but i don't see

Sorry to here that you ran into that issue.  Unfortunately, Windows sometimes believes the software is running when it really is not, but that can be fixed by rebooting the rig. I am still looking into the causes of that issue and better fixes. However, this could happen with any version of the software, not just version 2.0. 
But still again i have an issue with benchmarks.
So i enable all miner with yellow light on in all cards, when it starts benchmark for example lyra2z has coolminer and cryptodredge enabled but at the end of benchmark they are 0 like result and it just tested 1 miner app on 4, but i enabled all miners app

Which version of the Nvidia drivers are you using? Both CoolMiner and Cryptodredge 7 require Cuda 9.2 compatible drivers. If you have the latest versions, it is possible that a result was not found during the small time benchmarking.  You can benchmark the GPU again and HA will only benchmark those algorithms that are enabled and have a hash rate of zero.
newbie
Activity: 481
Merit: 0

Have you enabled the Track Earnings setting on the wallets you would like to monitor?  Since some users have many wallets because they mine specific coins rather than auto-exchanging to BTC, earnings tracking is off by default.  When you enable Track Earnings for a wallet, the software will start building an earnings data file for that wallet at the next refresh, but it can take a couple of refreshes (the default rate is 10 minutes) for the software to begin showing the data.

enabled the Track Earnings
system was reboot
system was 12 hours running when i take printsceen

Ok, thanks.  In your Windows user’s AppData\Local\Local\CongeriesSoftware\HashAuger folder, there should be a subfolder named User Data. In that folder should be a file named after the wallet. Based on your screenshot, it should be named 1070_earnings.xml. Does that file exist and does it have a file size greater than 0 bytes?

not find folder  DATA

see  pcs
https://imgur.com/a/xGoSUg8

If the User Data folder does not exist, then the software is not reading your Track Earnings wallet setting correctly.  First, please upgrade to version 2.0.1 as I made some changes to improve how that works in the code.  If the problem still occurs, then try disabling Track Earnings on the wallet, save the wallet, restart HA, enable Track Earnings and save the wallet again.
newbie
Activity: 481
Merit: 0
I got a trouble


Benchmarking remotely using Team Viewer

Off the screen briefly

Hash auger terminated when connected to team viewer

There are a few users who are using HA with Team Viewer on the Discord channel and that does not sound like a Team Viewer error. Much earlier versions of HA were incompatible with Team Viewer and the software was shown as a blank white box, but that was fixed a while ago.  Unless the software is only having that problem in Team Viewer, then the issue is most likely caused by something else.  I recommend downloading the latest release and seeing if the problem still occurs.  If so, then we can try to trace it to a specific miner or algorithm.
newbie
Activity: 31
Merit: 0
I got a trouble


Benchmarking remotely using Team Viewer

Off the screen briefly

Hash auger terminated when connected to team viewer
full member
Activity: 728
Merit: 106
It would be good to include t-rex miner.
And also wallets sorting would be nice (alfabetically)
sr. member
Activity: 756
Merit: 250
I have to back to prev version it doesn't start idk the why just don't start

And it says one instance of hashauger is already running but i don't see

Sorry to here that you ran into that issue.  Unfortunately, Windows sometimes believes the software is running when it really is not, but that can be fixed by rebooting the rig. I am still looking into the causes of that issue and better fixes. However, this could happen with any version of the software, not just version 2.0. 
But still again i have an issue with benchmarks.
So i enable all miner with yellow light on in all cards, when it starts benchmark for example lyra2z has coolminer and cryptodredge enabled but at the end of benchmark they are 0 like result and it just tested 1 miner app on 4, but i enabled all miners app
newbie
Activity: 481
Merit: 0

Have you enabled the Track Earnings setting on the wallets you would like to monitor?  Since some users have many wallets because they mine specific coins rather than auto-exchanging to BTC, earnings tracking is off by default.  When you enable Track Earnings for a wallet, the software will start building an earnings data file for that wallet at the next refresh, but it can take a couple of refreshes (the default rate is 10 minutes) for the software to begin showing the data.

enabled the Track Earnings
system was reboot
system was 12 hours running when i take printsceen

Ok, thanks.  In your Windows user’s AppData\Local\Local\CongeriesSoftware\HashAuger folder, there should be a subfolder named User Data. In that folder should be a file named after the wallet. Based on your screenshot, it should be named 1070_earnings.xml. Does that file exist and does it have a file size greater than 0 bytes?
newbie
Activity: 481
Merit: 0
I have to back to prev version it doesn't start idk the why just don't start

And it says one instance of hashauger is already running but i don't see

Sorry to here that you ran into that issue.  Unfortunately, Windows sometimes believes the software is running when it really is not, but that can be fixed by rebooting the rig. I am still looking into the causes of that issue and better fixes. However, this could happen with any version of the software, not just version 2.0. 
newbie
Activity: 481
Merit: 0

Have you enabled the Track Earnings setting on the wallets you would like to monitor?  Since some users have many wallets because they mine specific coins rather than auto-exchanging to BTC, earnings tracking is off by default.  When you enable Track Earnings for a wallet, the software will start building an earnings data file for that wallet at the next refresh, but it can take a couple of refreshes (the default rate is 10 minutes) for the software to begin showing the data.
Pages:
Jump to: