Pages:
Author

Topic: HSRMINER Neoscrypt Fork by Justaminer - High Hashrate, API, all GPUs supported! - page 7. (Read 13383 times)

jr. member
Activity: 325
Merit: 2
For some reason, when I set over 9 intensity it's crashing. From what I've read in this thread, people trying to run over 9 cards have a problem too. So what I understand it that any 2-digit numbers is causing a crush.
Was an answer provided and I missed it? Huh

For what GPU type are you trying to change intensity? You don't need to change it for GTX 1070 as it's already fine tuned and you can't randomly change it because algo optimized for certain value. Also, 9 is very low value, why do you specify it? Lowest default intensity for slowest card (GT 1030 and alike) is 15.

2-digit numbers doesn't cause crash. It was bug in original hsrminer and I've already fixed it:

  • Fixed bug of original hsrminer - now you can use GPU's numbers > 9 with -d option, i.e.  -d 10,11,12
Hello. I'll do some more testing and let you know but this will be tomorrow.
For now I just wanted to thank you for the reply and let you know what are my intentions with "intensity".

I'm using the NemosMiner which includes your miner inside, but since this Nemos is an algo-auto-switching miner, I'm forced to keep one overclock setting for every algo. I found that your miner is the only one that's pushing my 1080ti to 70 degrees, something that I don't feel comfortable with. I'm using the EVGA 1080ti FTW3 and I noticed that one of the "POWER" temp sensors is peaking high while the rest 8 sensors (including GPU & RAM) is top 63.
I also have a 1070 and 1070ti on my rig but those have fine temps. So what I tried was to include an argument in the Nemos's files that will launch your HSRM at reduced intensity for the 1080ti. I tried starting from 8 and going up 1 point at a time and when I reach 10, HSRM opens and closes in an instant. I know I've put the intensity argument correctly since at intensity 8 the hashrate and temps were veeeeery low! What I'm hoping for is a slight decrease in the intensity, like 1 point max.

Your best and by far quickest way to try to solve issue - exit from NemosMiner, delete hsrminer_neoscrypt_fork_hp.exe from the \bin\NVIDIA-Hsrminer subfolder of the NemosMiner. Download normal priority version of the miner, unpack and put it to the \bin\NVIDIA-Hsrminer subfolder and rename it to hsrminer_neoscrypt_fork_hp.exe

Run NemosMiner, or just run hsrminer_neoscrypt_fork_hp.exe manually and check GPU's temp. Normal priority version should stress GPU less than _hp version, but of course you will get lower hashrate. Also you can try to reduce OC of the GPU, reduce PL%, and so on.

As for intensity, intensity 8 is lowest, so no point to use it for powerful gpu. Try to use -i 17, -i 17.1, etc, up to -i 17.4

full member
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
For some reason, when I set over 9 intensity it's crashing. From what I've read in this thread, people trying to run over 9 cards have a problem too. So what I understand it that any 2-digit numbers is causing a crush.
Was an answer provided and I missed it? Huh

For what GPU type are you trying to change intensity? You don't need to change it for GTX 1070 as it's already fine tuned and you can't randomly change it because algo optimized for certain value. Also, 9 is very low value, why do you specify it? Lowest default intensity for slowest card (GT 1030 and alike) is 15.

2-digit numbers doesn't cause crash. It was bug in original hsrminer and I've already fixed it:

  • Fixed bug of original hsrminer - now you can use GPU's numbers > 9 with -d option, i.e.  -d 10,11,12
Hello. I'll do some more testing and let you know but this will be tomorrow.
For now I just wanted to thank you for the reply and let you know what are my intentions with "intensity".

I'm using the NemosMiner which includes your miner inside, but since this Nemos is an algo-auto-switching miner, I'm forced to keep one overclock setting for every algo. I found that your miner is the only one that's pushing my 1080ti to 70 degrees, something that I don't feel comfortable with. I'm using the EVGA 1080ti FTW3 and I noticed that one of the "POWER" temp sensors is peaking high while the rest 8 sensors (including GPU & RAM) is top 63.
I also have a 1070 and 1070ti on my rig but those have fine temps. So what I tried was to include an argument in the Nemos's files that will launch your HSRM at reduced intensity for the 1080ti. I tried starting from 8 and going up 1 point at a time and when I reach 10, HSRM opens and closes in an instant. I know I've put the intensity argument correctly since at intensity 8 the hashrate and temps were veeeeery low! What I'm hoping for is a slight decrease in the intensity, like 1 point max.
jr. member
Activity: 325
Merit: 2

I am using gtx 1060, this software is support for 1060 or not. Its temperature is how much, looking forward to feedback soon, thanks!

Yes, gtx 1060 is supported. Usually you should keep GPU temp below 70-75 C. If your gpu's temp is too high, reduce over clocking, get some external cooling, or try to use normal priority version of the miner.
jr. member
Activity: 325
Merit: 2
Can I use this for solomining Neoscrypt coins with getblocktemplate?

Yes, try it - getblocktemplate is enabled by default. One user was asking earlier for additional options to impove solo-mining, I've added it: --scantime and --timeout
jr. member
Activity: 325
Merit: 2
For some reason, when I set over 9 intensity it's crashing. From what I've read in this thread, people trying to run over 9 cards have a problem too. So what I understand it that any 2-digit numbers is causing a crush.
Was an answer provided and I missed it? Huh

For what GPU type are you trying to change intensity? You don't need to change it for GTX 1070 as it's already fine tuned and you can't randomly change it because algo optimized for certain value. Also, 9 is very low value, why do you specify it? Lowest default intensity for slowest card (GT 1030 and alike) is 15.

2-digit numbers doesn't cause crash. It was bug in original hsrminer and I've already fixed it:

  • Fixed bug of original hsrminer - now you can use GPU's numbers > 9 with -d option, i.e.  -d 10,11,12
newbie
Activity: 5
Merit: 0

I am using gtx 1060, this software is support for 1060 or not. Its temperature is how much, looking forward to feedback soon, thanks!
newbie
Activity: 33
Merit: 0
Can I use this for solomining Neoscrypt coins with getblocktemplate?
full member
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
For some reason, when I set over 9 intensity it's crashing. From what I've read in this thread, people trying to run over 9 cards have a problem too. So what I understand it that any 2-digit numbers is causing a crush.
Was an answer provided and I missed it? Huh
jr. member
Activity: 325
Merit: 2
Can You Add the Share Numbers and Ratio? I mean How many Accepted and Rejected.  CC Miner have these

Ratio is already there, every 7 accepted shares miner displays overall speed and accepted/rejected ratio %.
Number of accepted/rejected shares can be added too, I will take a look. For now you can see number of accepted and rejected shares with any API monitoring software.
jr. member
Activity: 325
Merit: 2
GT 1030 has 2GB  Grin
probably too low to deal with.

I'll add support for GT 1030 and release new version tomorrow, so you will be able to test it.


Tested and been running without any issue along with my 2 x GTX 1080 ti.
Result are below

GT 1030
GPU clock: Default
Memory clock: Default
Power consumption: 85% *25W (Default 30W)
Hashrate: 251~258kh/s

Note:
It won’t generate power consumption log as 1080 ti does.
so I m assuming the TDP would be 25W with 85% power draw
Probably GT 1030 chip doesn’t contain the power consumption parameter
that can be referenced or monitored  by a program.

Besides
I m just surprised at the output of this cheap 85$ GT 1030
If you stack 6 x of GT 1030, it will reach 1,500kh/s with around 150W
Which is almost same output as my GTX 1080 ti valued over 1,000$+ now

GT 1030 x 6  is like 600$... insanely cheap kid with a good output
But you won’t like too many kids occupying your mothership yeah? Lol
Cheers  Wink

Anyways
Thanks for the support
Justaminer

Thanks for info Smiley You can try to tweak intensity for GT 1030, default one is 15.

You can use --benchmark with -i 15.1 and so on with little steps, 15.2, 15.3 - may be you will be able to get 300 Kh/s  Cheesy

To make benchmark complete faster use --benchmark -s 3 -i INTENSITY_TO_TEST
newbie
Activity: 5
Merit: 0
GT 1030 has 2GB  Grin
probably too low to deal with.

I'll add support for GT 1030 and release new version tomorrow, so you will be able to test it.


Tested and been running without any issue along with my 2 x GTX 1080 ti.
Result are below

GT 1030
GPU clock: Default
Memory clock: Default
Power consumption: 85% *25W (Default 30W)
Hashrate: 251~258kh/s

Note:
It won’t generate power consumption log as 1080 ti does.
so I m assuming the TDP would be 25W with 85% power draw
Probably GT 1030 chip doesn’t contain the power consumption parameter
that can be referenced or monitored  by a program.

Besides
I m just surprised at the output of this cheap 85$ GT 1030
If you stack 6 x of GT 1030, it will reach 1,500kh/s with around 150W
Which is almost same output as my GTX 1080 ti valued over 1,000$+ now

GT 1030 x 6  is like 600$... insanely cheap kid with a good output
But you won’t like too many kids occupying your mothership yeah? Lol
Cheers  Wink

Anyways
Thanks for the support
Justaminer
newbie
Activity: 12
Merit: 0
Can You Add the Share Numbers and Ratio? I mean How many Accepted and Rejected.  CC Miner have these
jr. member
Activity: 325
Merit: 2
GT 1030 is not supported ?
the miner shuts down immediately after benchmark

Test new version and post results please.

I'm using Klaust. Yeah network timeout. Not exactly sure if that helps, but I've seen on threads for solo mining feather coin, they put network timeout to 1. And yes I did try, works awesome for pool mining, but for solo mining it only got rejects Sad 100% reject rate.
I see. I will add --timeout and --scan-time, but won't promise it will happen with next version release.
You the man! Thank you! Smiley

Check new version, options added.
jr. member
Activity: 325
Merit: 2
Hi everyone,
I currently have 5x 1080TI cards mining on NiceHash, but the pay its pathetic atm.
To get setup mining HSR, is it best to use Justaminer's fork or Excavator?

I'm new to mining and am struggling to get the bat file setup properly. It currently reads:
hsrminer_neoscrypt_fork_hp -a hsr -o stratum+tcp://hsr1.91pool.com:9009 -u HJdQzYzdC8FJvr42PLpnNLM1ydnaDMu8fX -p c=GBX

Is this pool ok? It says to use both:
Node1 : hsr1.91pool.com:9009
Node2 : hsr2.91pool.com:9010
How would I set this up?

Also do I need '-p' if I don't have a password?
And what does c=GBX mean?

Currenly it fails to mine with the following message 
Share rejected, low difficulty...

Any help is greatly appreciated!

Friend, this is hsrminer_neoscrypt_fork, you can't mine hsr algo with it.
-p is used to send pool "options" you want to choose during mining, like what coin are you going to mine, what difficulty to choose and so on, you can read more about it at the pool web site.

c=GBX tells pool that you are going to mine Gobyte crypto coin. If you want to mine neoscrypt algo, you should probably choose other pool, example:

hsrminer_neoscrypt_fork_hp -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u YOUR_BTC_WALLET -p c=BTC
jr. member
Activity: 325
Merit: 2
New version released! Test support for GT 1030, P102-100, new options: -s, -T

See 1st msg of the topic for details and download links.

newbie
Activity: 2
Merit: 0
Hi everyone,
I currently have 5x 1080TI cards mining on NiceHash, but the pay its pathetic atm.
To get setup mining HSR, is it best to use Justaminer's fork or Excavator?

I'm new to mining and am struggling to get the bat file setup properly. It currently reads:
hsrminer_neoscrypt_fork_hp -a hsr -o stratum+tcp://hsr1.91pool.com:9009 -u HJdQzYzdC8FJvr42PLpnNLM1ydnaDMu8fX -p c=GBX

Is this pool ok? It says to use both:
Node1 : hsr1.91pool.com:9009
Node2 : hsr2.91pool.com:9010
How would I set this up?

Also do I need '-p' if I don't have a password?
And what does c=GBX mean?

Currenly it fails to mine with the following message 
Share rejected, low difficulty...

Any help is greatly appreciated!

jr. member
Activity: 325
Merit: 2
GT 1030 has 2GB  Grin
probably too low to deal with.

I'll add support for GT 1030 and release new version tomorrow, so you will be able to test it.
full member
Activity: 223
Merit: 100
HI

GT 1030 is not supported ?
the miner shuts down immediately after benchmark

Besides,
I have two GTX 1080 ti running on your miner and gives a good out put

120+ GPU clock
250+ Mem clock
145W: 60% Power Consumption
1500 KH/s

I just purchased this cheap GT 1030 @ 85$
and wanted to see if it can generates good output with your miner

Thanks


As for 1030, I can try to add it, how much video memory your 1030 gpu has?

Yes I ve tried maxing it up and  I was able to reach 2000 KH/s up per card   woohoo!!
but power consumption was insane  285W: 120% PL
so I stopped and ended up the at the sweet spot mentioned above.
chose cost effectiveness rather than being a superman   Grin


GT 1030 has 2GB  Grin
probably too low to deal with.


Lock the voltage at 825mv, set the clock to 1695-1708mhz, and you will get around +1800kh/s at around 200W.
Hello, you can get higher hashrate with 1080Ti if you increase PL% , but it's choice of course.
newbie
Activity: 5
Merit: 0
HI

GT 1030 is not supported ?
the miner shuts down immediately after benchmark

Besides,
I have two GTX 1080 ti running on your miner and gives a good out put

120+ GPU clock
250+ Mem clock
145W: 60% Power Consumption
1500 KH/s

I just purchased this cheap GT 1030 @ 85$
and wanted to see if it can generates good output with your miner

Thanks

Hello, you can get higher hashrate with 1080Ti if you increase PL% , but it's choice of course.

As for 1030, I can try to add it, how much video memory your 1030 gpu has?

Yes I ve tried maxing it up and  I was able to reach 2000 KH/s up per card   woohoo!!
but power consumption was insane  285W: 120% PL
so I stopped and ended up the at the sweet spot mentioned above.
chose cost effectiveness rather than being a superman   Grin


GT 1030 has 2GB  Grin
probably too low to deal with.
jr. member
Activity: 325
Merit: 2
HI

GT 1030 is not supported ?
the miner shuts down immediately after benchmark

Besides,
I have two GTX 1080 ti running on your miner and gives a good out put

120+ GPU clock
250+ Mem clock
145W: 60% Power Consumption
1500 KH/s

I just purchased this cheap GT 1030 @ 85$
and wanted to see if it can generates good output with your miner

Thanks

Hello, you can get higher hashrate with 1080Ti if you increase PL% , but it's choice of course.

As for 1030, I can try to add it, how much video memory your 1030 gpu has?
Pages:
Jump to: