[In Stock] Batch 8! Gridseed miners in Stock in Los Angeles. [$225] - page 16.

Mad Macs

member

Activity: 92

Merit: 10

I'm on vacation right now but will follow up with them when I get back into town. I'm just going to RMA the entire thing. I confirmed only 2 gridseeds work out of 10.

Zoomhash_michael

sr. member

Activity: 334

Merit: 250

Quote from: themeco on March 29, 2014, 12:52:01 PM

@gbyg thanks for the help, I've sent another two emails. It's never nice waiting when I would rather be mining

@philipma1957 I'm going to avoid the bricks from now on I think, I'm worried they would burn down my house. I've gone for an ATX psu with the 12v to 6 pin connectors. More trusted territory for me.

Hey Meco!

We will take care of you. email [email protected]. PM with your order number. I will be in the office in a little bit too. Thanks.

gbyg

member

Activity: 71

Merit: 10

Quote from: guytechie on March 29, 2014, 01:46:58 PM

While I'm waiting for my equipment to come, any suggestions for RPi images?

I was just going to use the one on zoomhash's site. Would it handle 20 GS?

Any experiences with Scripta? And would BAMT work?

I found modified scripta for GS is best because it comes with web control.

guytechie

hero member

Activity: 677

Merit: 500

While I'm waiting for my equipment to come, any suggestions for RPi images?

I was just going to use the one on zoomhash's site. Would it handle 20 GS?

Any experiences with Scripta? And would BAMT work?

philipma1957

legendary

Activity: 4326

Merit: 8899

'The right to privacy matters'

Quote from: themeco on March 29, 2014, 12:52:01 PM

@gbyg thanks for the help, I've sent another two emails. It's never nice waiting when I would rather be mining

@philipma1957 I'm going to avoid the bricks from now on I think, I'm worried they would burn down my house. I've gone for an ATX psu with the 12v to 6 pin connectors. More trusted territory for me.

be careful make sure that all center pins are + .

Buy a cheap meter to test.

also remember that a pcie cable can have a lot of watts 150 or more. wire handle with care.

themeco

member

Activity: 71

Merit: 10

@gbyg thanks for the help, I've sent another two emails. It's never nice waiting when I would rather be mining

@philipma1957 I'm going to avoid the bricks from now on I think, I'm worried they would burn down my house. I've gone for an ATX psu with the 12v to 6 pin connectors. More trusted territory for me.

philipma1957

legendary

Activity: 4326

Merit: 8899

'The right to privacy matters'

looks like power supplies are defective.

I would advise my solution 1x 6 amp brick and 1 splitter runs 2 grids perfectly .

yeah I now have 7 bricks with 7 splitters running 14 grids ,

but if 1 brick blows up I lose 2 grids not 5..

also for the wiring challenged these are the perfect dc plugs:

blue is cool and red is dead

http://www.mcmelectronics.com/product/82-12675

when correctly hooked up the are blue. I run 1 gridseed this way.

gbyg

member

Activity: 71

Merit: 10

Quote from: themeco on March 29, 2014, 11:47:04 AM

Quote from: gbyg on March 29, 2014, 06:43:50 AM

Quote from: themeco on March 29, 2014, 06:00:26 AM

Still no response from Zoom Hash for me after 24 hours. Like others here I seem to have been sold a defective product and I'm not happy. Has anyone had any response?

I think they might be busy. My power supply blew up with all GS. send it back after confirmed by zoomhash.

How long did it take for you to get a response? Did they replace your units? I received a new power supply today and tested them. Not good news for me, two wont power on and the other 8 power up but no red light and aren't being detected by my PC.

it took around 48 hr before they replay. i will pm you 2 email address. they said to send the pack back to them. they will sort it out. i just send it yesterday by dhl. will know monday/tuesday.

dugdig

newbie

Activity: 11

Merit: 0

Quote from: judypug1956 on March 29, 2014, 09:42:25 AM

Quote from: dugdig on March 29, 2014, 01:21:21 AM

Hi.

I ordered 24/03 1x10 GridSeed pack
I received yesterday 27/03 (very very fast), everything installed correctly, after 1 hour of minig (Dogecoin) 1 PSU is burned, resulting....... death of 4 miners. Embarrassed

I see that you are not the only one that happened.
What should I do for the RMA?

Thank you.

photos please. nice and close on the psu.

secondly did you run dual or only scrypt.

this gear is a beast for scrypt. and mining dual is a mistake.

lastly I use these to power 2 running scrypt

http://www.amazon.com/gp/product/B0050H9A18/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B000VE7GQQ/ref=oh_details_o01_s00_i01?ie=UTF8&psc=1

I have 13 gridseeds and 2 on the way

Mining only scrypt, I mined about 300 dogecoin, then it was burnt PSU with the miners attacked.

to look outside the PSU does not seem to be damaged, same thing 4 GS, but do not work. if i try to install them on your PC, they are not even recognized on the usb port. the remaining 6 GS work well.

themeco

member

Activity: 71

Merit: 10

Quote from: gbyg on March 29, 2014, 06:43:50 AM

Quote from: themeco on March 29, 2014, 06:00:26 AM

Still no response from Zoom Hash for me after 24 hours. Like others here I seem to have been sold a defective product and I'm not happy. Has anyone had any response?

I think they might be busy. My power supply blew up with all GS. send it back after confirmed by zoomhash.

How long did it take for you to get a response? Did they replace your units? I received a new power supply today and tested them. Not good news for me, two wont power on and the other 8 power up but no red light and aren't being detected by my PC.

judypug1956

sr. member

Activity: 355

Merit: 276

Quote from: dugdig on March 29, 2014, 01:21:21 AM

Hi.

I ordered 24/03 1x10 GridSeed pack
I received yesterday 27/03 (very very fast), everything installed correctly, after 1 hour of minig (Dogecoin) 1 PSU is burned, resulting....... death of 4 miners. Embarrassed

I see that you are not the only one that happened.
What should I do for the RMA?

Thank you.

photos please. nice and close on the psu.

secondly did you run dual or only scrypt.

this gear is a beast for scrypt. and mining dual is a mistake.

lastly I use these to power 2 running scrypt

http://www.amazon.com/gp/product/B0050H9A18/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B000VE7GQQ/ref=oh_details_o01_s00_i01?ie=UTF8&psc=1

I have 13 gridseeds and 2 on the way

Xer0

hero member

Activity: 826

Merit: 1000

°^°

picked them up at our hub - they dont move on saturdays

no customs delay, no additional documents required
paid & go

ZoomHash is the BITMAIN of Gridseed!

gbyg

member

Activity: 71

Merit: 10

Quote from: themeco on March 29, 2014, 06:00:26 AM

Still no response from Zoom Hash for me after 24 hours. Like others here I seem to have been sold a defective product and I'm not happy. Has anyone had any response?

I think they might be busy. My power supply blew up with all GS. send it back after confirmed by zoomhash.

themeco

member

Activity: 71

Merit: 10

Still no response from Zoom Hash for me after 24 hours. Like others here I seem to have been sold a defective product and I'm not happy. Has anyone had any response?

adzmullen

newbie

Activity: 21

Merit: 0

Quote from: Mad Macs on March 28, 2014, 03:37:52 PM

Quote from: themeco on March 28, 2014, 01:35:17 PM

Have you tried this - http://zoomhash.com/pages/raspberry-pi

Okay, I did this, ran through the configuration and don't see anything happening. I do screens and all 5 processes are "detached"

Ideas? Or just use scripta?

do a : sudo screen -ls this lists the active screens and take note of the session number in the format of 2XXX.X
then do a: sudo screen -r 2XXX.X

it will attach you to one of the screens and you will see one of the miners working away, to detach hold down control-a-d and you will be returned to command line

adzmullen

newbie

Activity: 21

Merit: 0

Quote from: guytechie on March 28, 2014, 12:52:16 PM

Hmm... I'm a little worried... zoomhash hasn't posted anything since March 14, 2014...

That's not correct i ordered on the 21st March and received everything by the 24th

dugdig

newbie

Activity: 11

Merit: 0

Hi.

I ordered 24/03 1x10 GridSeed pack
I received yesterday 27/03 (very very fast), everything installed correctly, after 1 hour of minig (Dogecoin) 1 PSU is burned, resulting....... death of 4 miners. Embarrassed

I see that you are not the only one that happened.
What should I do for the RMA?

Thank you.

rob1313

full member

Activity: 162

Merit: 100

Quote from: Mad Macs on March 28, 2014, 07:41:30 PM

My kit shipped Tuesday from Hong Kong, and I had it Thursday.

Too bad most of my stuff doesn't work, but it DID get delivered promptly.

Quote from: Xer0 on March 28, 2014, 07:27:32 PM

my order cleared customs. instant. no document sending this time

...finally a seller who declares right value and includes an invoice?

Try switching out usb cabels. i had one cable that did not work.

Mad Macs

member

Activity: 92

Merit: 10

My kit shipped Tuesday from Hong Kong, and I had it Thursday.

Too bad most of my stuff doesn't work, but it DID get delivered promptly.

Quote from: Xer0 on March 28, 2014, 07:27:32 PM

my order cleared customs. instant. no document sending this time

...finally a seller who declares right value and includes an invoice?

Xer0

hero member

Activity: 826

Merit: 1000

°^°

my order cleared customs. instant. no document sending this time

...finally a seller who declares right value and includes an invoice?

Topic: [In Stock] Batch 8! Gridseed miners in Stock in Los Angeles. [$225] - page 16. (Read 54920 times)