which fan should i buy?
if one fan is down
Topic: Innosilicon A4+ setup tutorial - page 10. (Read 6792 times)
According to inno they keep screwing up the firmware and it burns out the thing, so at least Dec 20th firmware.
just remember the root password changed to t1t2t3a5 with the Dec 20th firmware.
I have some running Dec20th and Dec29th. both seem similarly okay.
just remember the root password changed to t1t2t3a5 with the Dec 20th firmware.
I have some running Dec20th and Dec29th. both seem similarly okay.
thanks for your reply, i just wonder since my firmware is 22nd November g19, and as I see instruction from the Inno website, I see it's
"If the firmware build date is before 2017.11.24, you must upgrade through TF card"
but after I read the instruction manual to update through TF card, i have no idea how the TF card can connect with the G19 one. after the step 10 in the instruction, I see it do nothing with the TF card for the miner? so what I need to do
Please sorry for my newbie question. I've just begun some first step to the mining zone.
appreciate so much for your answer. thanks.
Hi Gazdac2
Wondering if you can help
I have 3 miners that never start mining. System > Overview shows information OK however Miner status just spins forever.
ps|grep inno shows the ./innominer process running
however a few minutes later...
logs show it just seems to loop forever
I've tried:
Reflashing firmware
restoring factory defaults
re-saving all pools
checking /lib/python3.4/_sysconfigdata.py for corruption
more logs that might help, this shows where it craps out
Wondering if you can help
I have 3 miners that never start mining. System > Overview shows information OK however Miner status just spins forever.
ps|grep inno shows the ./innominer process running
Code:
innominer_T2 -o stratum+tcp://s1.theblocksfactory.com:9004 -u x -p x -o stratum+tcp://scrypt.eu.nicehash.com:3333#xnsub -u x -p x -o stratum+tcp://scrypt.usa.nicehash.com:3333#xnsub -u x -p x --A1Pll1 1044 --A1Pll2 1044 --A1Pll3 1044 --A1Pll4 1044 --A1Pll5 1044 --A1Pll6 1044 --A1Pll7 1044 --A1Pll8 1044 --A1Vol1 25 --A1Vol2 25 --A1Vol3 25 --A1Vol4 25 --A1Vol5 25 --A1Vol6 25 --A1Vol7 25 --A1Vol8 25 --A1Fanmode 1 --A1Fanspd 1 --api-listen --syslog
however a few minutes later...
Code:
ps|grep inno
839 root 5:44 python3.4 /home/inno_daemon/MServer.py
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1024 -b 5
839 root 5:44 python3.4 /home/inno_daemon/MServer.py
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1024 -b 5
logs show it just seems to loop forever
Code:
tail -n 500 /tmp/log/innominer.log
Jan 1 00:00:14 (none) syslog.info syslogd started: BusyBox v1.27.1
Jan 1 00:00:14 (none) daemon.info : starting pid 845, tty '': '-/bin/sh'
Jan 4 08:57:38 (none) local0.warn innominer_T2: Started cgminer 4.10.0
Jan 4 08:57:38 (none) local0.info innominer_T2: hardware version is G19
Jan 4 08:57:38 (none) local0.info innominer_T2: miner type is T2
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.warn innominer_T2: A1: checking A1 chain
Jan 4 08:57:38 (none) local0.warn innominer_T2: SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:40 (none) local0.warn innominer_T2: SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:42 (none) local0.warn innominer_T2: SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:44 (none) local0.warn innominer_T2: SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:46 (none) local0.warn innominer_T2: SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:48 (none) local0.warn innominer_T2: SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:50 (none) local0.warn innominer_T2: SPI '/dev/spidev6.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:52 (none) local0.warn innominer_T2: SPI '/dev/spidev7.0': mode=1, bits=8, speed=1500000
Jan 4 08:58:05 (none) local0.err innominer_T2: Plug Status[0] = 0
Jan 4 08:58:11 (none) local0.err innominer_T2: Plug Status[1] = 0
Jan 4 08:58:17 (none) local0.err innominer_T2: Plug Status[2] = 0
Jan 4 08:58:23 (none) local0.err innominer_T2: Plug Status[3] = 0
Jan 4 08:58:29 (none) local0.err innominer_T2: Plug Status[4] = 1
Jan 4 08:58:29 (none) local0.err innominer_T2: chain:4 the plat is not inserted
Jan 4 08:58:35 (none) local0.err innominer_T2: Plug Status[5] = 1
Jan 4 08:58:35 (none) local0.err innominer_T2: chain:5 the plat is not inserted
Jan 4 08:58:41 (none) local0.err innominer_T2: Plug Status[6] = 1
Jan 4 08:58:41 (none) local0.err innominer_T2: chain:6 the plat is not inserted
Jan 4 08:58:47 (none) local0.err innominer_T2: Plug Status[7] = 1
Jan 4 08:58:47 (none) local0.err innominer_T2: chain:7 the plat is not inserted
Jan 4 08:58:47 (none) local0.info innominer_T2: pre 0: A1 init chain
Jan 4 08:58:48 (none) local0.warn innominer_T2: 0: detected 72 chips
Jan 4 08:58:48 (none) local0.warn innominer_T2: collect core success
Jan 4 08:58:48 (none) local0.warn innominer_T2: 0: no A1 chip-chain detected
Jan 4 08:58:48 (none) local0.warn innominer_T2: spidev0.0: 0: Found 72 A1 chips
Jan 4 08:58:48 (none) local0.warn innominer_T2: Detected the 0 A1 chain with 72 chips
Jan 4 08:58:48 (none) local0.info innominer_T2: pre 1: A1 init chain
Jan 4 08:58:48 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 4 08:58:49 (none) local0.warn innominer_T2: cmd bist start: poll fail !
Jan 4 08:58:49 (none) local0.warn innominer_T2: bist start fail
Jan 4 08:58:49 (none) local0.err innominer_T2: init 1 A1 chain fail
Jan 4 08:58:49 (none) local0.info innominer_T2: pre 2: A1 init chain
Jan 4 08:58:50 (none) local0.warn innominer_T2: 2: detected 72 chips
Jan 4 08:58:50 (none) local0.warn innominer_T2: collect core success
Jan 4 08:58:50 (none) local0.warn innominer_T2: 2: no A1 chip-chain detected
Jan 4 08:58:50 (none) local0.warn innominer_T2: spidev2.0: 2: Found 72 A1 chips
Jan 4 08:58:50 (none) local0.warn innominer_T2: Detected the 2 A1 chain with 72 chips
Jan 4 08:58:50 (none) local0.info innominer_T2: pre 3: A1 init chain
Jan 4 08:58:51 (none) local0.warn innominer_T2: 3: detected 72 chips
Jan 4 08:58:51 (none) local0.warn innominer_T2: collect core success
Jan 4 08:58:51 (none) local0.warn innominer_T2: 3: no A1 chip-chain detected
Jan 4 08:58:51 (none) local0.warn innominer_T2: spidev3.0: 3: Found 72 A1 chips
Jan 4 08:58:51 (none) local0.warn innominer_T2: Detected the 3 A1 chain with 72 chips
Jan 4 08:58:51 (none) local0.info innominer_T2: start to configure all chain from 0 to 120
Jan 4 08:58:51 (none) local0.err innominer_T2: start to read temp
Jan 4 08:58:52 (none) local0.info innominer_T2: start to configure chain 0
Jan 4 08:58:52 (none) local0.notice innominer_T2: A1 = 120,0, Clock = 120MHz
Jan 4 08:58:52 (none) local0.err innominer_T2: start to read temp
Jan 4 08:59:52 (none) local0.warn innominer_T2: Started cgminer 4.10.0
Jan 4 08:59:52 (none) local0.info innominer_T2: hardware version is G19
Jan 4 08:59:52 (none) local0.info innominer_T2: miner type is T2
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.warn innominer_T2: A1: checking A1 chain
Jan 4 08:59:52 (none) local0.warn innominer_T2: SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
Jan 4 08:59:54 (none) local0.warn innominer_T2: SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
Jan 4 08:59:56 (none) local0.warn innominer_T2: SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
Jan 4 08:59:58 (none) local0.warn innominer_T2: SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
Jan 4 09:00:00 (none) local0.warn innominer_T2: SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
Jan 4 09:00:02 (none) local0.warn innominer_T2: SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
Jan 4 09:00:04 (none) local0.warn innominer_T2: SPI '/dev/spidev6.0': mode=1, bits=8, speed=1500000
Jan 4 09:00:06 (none) local0.warn innominer_T2: SPI '/dev/spidev7.0': mode=1, bits=8, speed=1500000
Jan 4 09:00:19 (none) local0.err innominer_T2: Plug Status[0] = 0
Jan 4 09:00:25 (none) local0.err innominer_T2: Plug Status[1] = 0
Jan 4 09:00:31 (none) local0.err innominer_T2: Plug Status[2] = 0
Jan 4 09:00:37 (none) local0.err innominer_T2: Plug Status[3] = 0
Jan 4 09:00:43 (none) local0.err innominer_T2: Plug Status[4] = 1
Jan 4 09:00:43 (none) local0.err innominer_T2: chain:4 the plat is not inserted
Jan 4 09:00:49 (none) local0.err innominer_T2: Plug Status[5] = 1
Jan 4 09:00:49 (none) local0.err innominer_T2: chain:5 the plat is not inserted
Jan 4 09:00:55 (none) local0.err innominer_T2: Plug Status[6] = 1
Jan 4 09:00:55 (none) local0.err innominer_T2: chain:6 the plat is not inserted
Jan 4 09:01:01 (none) local0.err innominer_T2: Plug Status[7] = 1
Jan 4 09:01:01 (none) local0.err innominer_T2: chain:7 the plat is not inserted
Jan 4 09:01:01 (none) local0.info innominer_T2: pre 0: A1 init chain
Jan 4 09:01:02 (none) local0.warn innominer_T2: 0: detected 72 chips
Jan 4 09:01:02 (none) local0.warn innominer_T2: collect core success
Jan 4 09:01:02 (none) local0.warn innominer_T2: 0: no A1 chip-chain detected
Jan 4 09:01:02 (none) local0.warn innominer_T2: spidev0.0: 0: Found 72 A1 chips
Jan 4 09:01:02 (none) local0.warn innominer_T2: Detected the 0 A1 chain with 72 chips
Jan 4 09:01:02 (none) local0.info innominer_T2: pre 1: A1 init chain
Jan 4 09:01:02 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 4 09:01:03 (none) local0.warn innominer_T2: cmd bist start: poll fail !
Jan 4 09:01:03 (none) local0.warn innominer_T2: bist start fail
Jan 4 09:01:03 (none) local0.err innominer_T2: init 1 A1 chain fail
Jan 4 09:01:03 (none) local0.info innominer_T2: pre 2: A1 init chain
Jan 4 09:01:04 (none) local0.warn innominer_T2: 2: detected 72 chips
Jan 4 09:01:04 (none) local0.warn innominer_T2: collect core success
Jan 4 09:01:04 (none) local0.warn innominer_T2: 2: no A1 chip-chain detected
Jan 4 09:01:04 (none) local0.warn innominer_T2: spidev2.0: 2: Found 72 A1 chips
Jan 4 09:01:04 (none) local0.warn innominer_T2: Detected the 2 A1 chain with 72 chips
Jan 4 09:01:04 (none) local0.info innominer_T2: pre 3: A1 init chain
Jan 4 09:01:05 (none) local0.warn innominer_T2: 3: detected 72 chips
Jan 4 09:01:05 (none) local0.warn innominer_T2: collect core success
Jan 4 09:01:05 (none) local0.warn innominer_T2: 3: no A1 chip-chain detected
Jan 4 09:01:05 (none) local0.warn innominer_T2: spidev3.0: 3: Found 72 A1 chips
Jan 4 09:01:05 (none) local0.warn innominer_T2: Detected the 3 A1 chain with 72 chips
Jan 4 09:01:05 (none) local0.info innominer_T2: start to configure all chain from 0 to 120
Jan 4 09:01:05 (none) local0.err innominer_T2: start to read temp
Jan 4 09:01:06 (none) local0.info innominer_T2: start to configure chain 0
Jan 4 09:01:06 (none) local0.notice innominer_T2: A1 = 120,0, Clock = 120MHz
Jan 4 09:01:06 (none) local0.err innominer_T2: start to read temp
Jan 4 09:02:09 (none) local0.warn innominer_T2: Started cgminer 4.10.0
Jan 4 09:02:09 (none) local0.info innominer_T2: hardware version is G19
Jan 4 09:02:09 (none) local0.info innominer_T2: miner type is T2
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.warn innominer_T2: A1: checking A1 chain
Jan 4 09:02:09 (none) local0.warn innominer_T2: SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:11 (none) local0.warn innominer_T2: SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:13 (none) local0.warn innominer_T2: SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:15 (none) local0.warn innominer_T2: SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:17 (none) local0.warn innominer_T2: SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:19 (none) local0.warn innominer_T2: SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:21 (none) local0.warn innominer_T2: SPI '/dev/spidev6.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:23 (none) local0.warn innominer_T2: SPI '/dev/spidev7.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:36 (none) local0.err innominer_T2: Plug Status[0] = 0
Jan 4 09:02:42 (none) local0.err innominer_T2: Plug Status[1] = 0
Jan 4 09:02:48 (none) local0.err innominer_T2: Plug Status[2] = 0
Jan 4 09:02:54 (none) local0.err innominer_T2: Plug Status[3] = 0
Jan 4 09:03:00 (none) local0.err innominer_T2: Plug Status[4] = 1
Jan 4 09:03:00 (none) local0.err innominer_T2: chain:4 the plat is not inserted
Jan 4 09:03:06 (none) local0.err innominer_T2: Plug Status[5] = 1
Jan 4 09:03:06 (none) local0.err innominer_T2: chain:5 the plat is not inserted
Jan 4 09:03:12 (none) local0.err innominer_T2: Plug Status[6] = 1
Jan 4 09:03:12 (none) local0.err innominer_T2: chain:6 the plat is not inserted
Jan 4 09:03:18 (none) local0.err innominer_T2: Plug Status[7] = 1
Jan 4 09:03:18 (none) local0.err innominer_T2: chain:7 the plat is not inserted
Jan 4 09:03:18 (none) local0.info innominer_T2: pre 0: A1 init chain
Jan 4 09:03:19 (none) local0.warn innominer_T2: 0: detected 72 chips
Jan 4 09:03:19 (none) local0.warn innominer_T2: collect core success
Jan 4 09:03:19 (none) local0.warn innominer_T2: 0: no A1 chip-chain detected
Jan 4 09:03:19 (none) local0.warn innominer_T2: spidev0.0: 0: Found 72 A1 chips
Jan 4 09:03:19 (none) local0.warn innominer_T2: Detected the 0 A1 chain with 72 chips
Jan 4 09:03:19 (none) local0.info innominer_T2: pre 1: A1 init chain
Jan 4 09:03:19 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 4 09:03:20 (none) local0.warn innominer_T2: cmd bist start: poll fail !
Jan 4 09:03:20 (none) local0.warn innominer_T2: bist start fail
Jan 4 09:03:20 (none) local0.err innominer_T2: init 1 A1 chain fail
Jan 4 09:03:20 (none) local0.info innominer_T2: pre 2: A1 init chain
Jan 4 09:03:21 (none) local0.warn innominer_T2: 2: detected 72 chips
Jan 4 09:03:21 (none) local0.warn innominer_T2: collect core success
Jan 4 09:03:21 (none) local0.warn innominer_T2: 2: no A1 chip-chain detected
Jan 4 09:03:21 (none) local0.warn innominer_T2: spidev2.0: 2: Found 72 A1 chips
Jan 4 09:03:21 (none) local0.warn innominer_T2: Detected the 2 A1 chain with 72 chips
Jan 4 09:03:21 (none) local0.info innominer_T2: pre 3: A1 init chain
Jan 4 09:03:22 (none) local0.warn innominer_T2: 3: detected 72 chips
Jan 4 09:03:22 (none) local0.warn innominer_T2: collect core success
Jan 4 09:03:22 (none) local0.warn innominer_T2: 3: no A1 chip-chain detected
Jan 4 09:03:22 (none) local0.warn innominer_T2: spidev3.0: 3: Found 72 A1 chips
Jan 4 09:03:22 (none) local0.warn innominer_T2: Detected the 3 A1 chain with 72 chips
Jan 4 09:03:22 (none) local0.info innominer_T2: start to configure all chain from 0 to 120
Jan 4 09:03:22 (none) local0.err innominer_T2: start to read temp
Jan 4 09:03:23 (none) local0.info innominer_T2: start to configure chain 0
Jan 4 09:03:23 (none) local0.notice innominer_T2: A1 = 120,0, Clock = 120MHz
Jan 4 09:03:23 (none) local0.err innominer_T2: start to read temp
Jan 4 09:04:27 (none) auth.info login[1330]: root login on 'pts/0'
Jan 4 09:04:27 (none) local0.warn innominer_T2: Started cgminer 4.10.0
Jan 4 09:04:27 (none) local0.info innominer_T2: hardware version is G19
Jan 4 09:04:27 (none) local0.info innominer_T2: miner type is T2
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.warn innominer_T2: A1: checking A1 chain
Jan 4 09:04:27 (none) local0.warn innominer_T2: SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:29 (none) local0.warn innominer_T2: SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:31 (none) local0.warn innominer_T2: SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:33 (none) local0.warn innominer_T2: SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:35 (none) local0.warn innominer_T2: SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:37 (none) local0.warn innominer_T2: SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:39 (none) local0.warn innominer_T2: SPI '/dev/spidev6.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:41 (none) local0.warn innominer_T2: SPI '/dev/spidev7.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:54 (none) local0.err innominer_T2: Plug Status[0] = 0
Jan 4 09:05:00 (none) local0.err innominer_T2: Plug Status[1] = 0
Jan 4 09:05:06 (none) local0.err innominer_T2: Plug Status[2] = 0
Jan 4 09:05:12 (none) local0.err innominer_T2: Plug Status[3] = 0
Jan 4 09:05:18 (none) local0.err innominer_T2: Plug Status[4] = 1
Jan 4 09:05:18 (none) local0.err innominer_T2: chain:4 the plat is not inserted
Jan 4 09:05:24 (none) local0.err innominer_T2: Plug Status[5] = 1
Jan 4 09:05:24 (none) local0.err innominer_T2: chain:5 the plat is not inserted
Jan 4 09:05:30 (none) local0.err innominer_T2: Plug Status[6] = 1
Jan 4 09:05:30 (none) local0.err innominer_T2: chain:6 the plat is not inserted
Jan 4 09:05:36 (none) local0.err innominer_T2: Plug Status[7] = 1
Jan 4 09:05:36 (none) local0.err innominer_T2: chain:7 the plat is not inserted
Jan 4 09:05:36 (none) local0.info innominer_T2: pre 0: A1 init chain
Jan 4 09:05:37 (none) local0.warn innominer_T2: 0: detected 72 chips
Jan 4 09:05:37 (none) local0.warn innominer_T2: collect core success
Jan 4 09:05:37 (none) local0.warn innominer_T2: 0: no A1 chip-chain detected
Jan 4 09:05:37 (none) local0.warn innominer_T2: spidev0.0: 0: Found 72 A1 chips
Jan 4 09:05:37 (none) local0.warn innominer_T2: Detected the 0 A1 chain with 72 chips
Jan 4 09:05:37 (none) local0.info innominer_T2: pre 1: A1 init chain
Jan 4 09:05:37 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 4 09:05:38 (none) local0.warn innominer_T2: cmd bist start: poll fail !
Jan 4 09:05:38 (none) local0.warn innominer_T2: bist start fail
Jan 4 09:05:38 (none) local0.err innominer_T2: init 1 A1 chain fail
Jan 4 09:05:38 (none) local0.info innominer_T2: pre 2: A1 init chain
Jan 4 09:05:39 (none) local0.warn innominer_T2: 2: detected 72 chips
Jan 4 09:05:39 (none) local0.warn innominer_T2: collect core success
Jan 4 09:05:39 (none) local0.warn innominer_T2: 2: no A1 chip-chain detected
Jan 4 09:05:39 (none) local0.warn innominer_T2: spidev2.0: 2: Found 72 A1 chips
Jan 4 09:05:39 (none) local0.warn innominer_T2: Detected the 2 A1 chain with 72 chips
Jan 4 09:05:39 (none) local0.info innominer_T2: pre 3: A1 init chain
Jan 4 09:05:40 (none) local0.warn innominer_T2: 3: detected 72 chips
Jan 4 09:05:40 (none) local0.warn innominer_T2: collect core success
Jan 4 09:05:40 (none) local0.warn innominer_T2: 3: no A1 chip-chain detected
Jan 4 09:05:40 (none) local0.warn innominer_T2: spidev3.0: 3: Found 72 A1 chips
Jan 4 09:05:40 (none) local0.warn innominer_T2: Detected the 3 A1 chain with 72 chips
Jan 4 09:05:40 (none) local0.info innominer_T2: start to configure all chain from 0 to 120
Jan 4 09:05:40 (none) local0.err innominer_T2: start to read temp
Jan 4 09:05:40 (none) local0.info innominer_T2: start to configure chain 0
Jan 4 09:05:40 (none) local0.notice innominer_T2: A1 = 120,0, Clock = 120MHz
Jan 4 09:05:41 (none) local0.err innominer_T2: start to read temp
Jan 1 00:00:14 (none) syslog.info syslogd started: BusyBox v1.27.1
Jan 1 00:00:14 (none) daemon.info : starting pid 845, tty '': '-/bin/sh'
Jan 4 08:57:38 (none) local0.warn innominer_T2: Started cgminer 4.10.0
Jan 4 08:57:38 (none) local0.info innominer_T2: hardware version is G19
Jan 4 08:57:38 (none) local0.info innominer_T2: miner type is T2
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:57:38 (none) local0.warn innominer_T2: A1: checking A1 chain
Jan 4 08:57:38 (none) local0.warn innominer_T2: SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:40 (none) local0.warn innominer_T2: SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:42 (none) local0.warn innominer_T2: SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:44 (none) local0.warn innominer_T2: SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:46 (none) local0.warn innominer_T2: SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:48 (none) local0.warn innominer_T2: SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:50 (none) local0.warn innominer_T2: SPI '/dev/spidev6.0': mode=1, bits=8, speed=1500000
Jan 4 08:57:52 (none) local0.warn innominer_T2: SPI '/dev/spidev7.0': mode=1, bits=8, speed=1500000
Jan 4 08:58:05 (none) local0.err innominer_T2: Plug Status[0] = 0
Jan 4 08:58:11 (none) local0.err innominer_T2: Plug Status[1] = 0
Jan 4 08:58:17 (none) local0.err innominer_T2: Plug Status[2] = 0
Jan 4 08:58:23 (none) local0.err innominer_T2: Plug Status[3] = 0
Jan 4 08:58:29 (none) local0.err innominer_T2: Plug Status[4] = 1
Jan 4 08:58:29 (none) local0.err innominer_T2: chain:4 the plat is not inserted
Jan 4 08:58:35 (none) local0.err innominer_T2: Plug Status[5] = 1
Jan 4 08:58:35 (none) local0.err innominer_T2: chain:5 the plat is not inserted
Jan 4 08:58:41 (none) local0.err innominer_T2: Plug Status[6] = 1
Jan 4 08:58:41 (none) local0.err innominer_T2: chain:6 the plat is not inserted
Jan 4 08:58:47 (none) local0.err innominer_T2: Plug Status[7] = 1
Jan 4 08:58:47 (none) local0.err innominer_T2: chain:7 the plat is not inserted
Jan 4 08:58:47 (none) local0.info innominer_T2: pre 0: A1 init chain
Jan 4 08:58:48 (none) local0.warn innominer_T2: 0: detected 72 chips
Jan 4 08:58:48 (none) local0.warn innominer_T2: collect core success
Jan 4 08:58:48 (none) local0.warn innominer_T2: 0: no A1 chip-chain detected
Jan 4 08:58:48 (none) local0.warn innominer_T2: spidev0.0: 0: Found 72 A1 chips
Jan 4 08:58:48 (none) local0.warn innominer_T2: Detected the 0 A1 chain with 72 chips
Jan 4 08:58:48 (none) local0.info innominer_T2: pre 1: A1 init chain
Jan 4 08:58:48 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 4 08:58:49 (none) local0.warn innominer_T2: cmd bist start: poll fail !
Jan 4 08:58:49 (none) local0.warn innominer_T2: bist start fail
Jan 4 08:58:49 (none) local0.err innominer_T2: init 1 A1 chain fail
Jan 4 08:58:49 (none) local0.info innominer_T2: pre 2: A1 init chain
Jan 4 08:58:50 (none) local0.warn innominer_T2: 2: detected 72 chips
Jan 4 08:58:50 (none) local0.warn innominer_T2: collect core success
Jan 4 08:58:50 (none) local0.warn innominer_T2: 2: no A1 chip-chain detected
Jan 4 08:58:50 (none) local0.warn innominer_T2: spidev2.0: 2: Found 72 A1 chips
Jan 4 08:58:50 (none) local0.warn innominer_T2: Detected the 2 A1 chain with 72 chips
Jan 4 08:58:50 (none) local0.info innominer_T2: pre 3: A1 init chain
Jan 4 08:58:51 (none) local0.warn innominer_T2: 3: detected 72 chips
Jan 4 08:58:51 (none) local0.warn innominer_T2: collect core success
Jan 4 08:58:51 (none) local0.warn innominer_T2: 3: no A1 chip-chain detected
Jan 4 08:58:51 (none) local0.warn innominer_T2: spidev3.0: 3: Found 72 A1 chips
Jan 4 08:58:51 (none) local0.warn innominer_T2: Detected the 3 A1 chain with 72 chips
Jan 4 08:58:51 (none) local0.info innominer_T2: start to configure all chain from 0 to 120
Jan 4 08:58:51 (none) local0.err innominer_T2: start to read temp
Jan 4 08:58:52 (none) local0.info innominer_T2: start to configure chain 0
Jan 4 08:58:52 (none) local0.notice innominer_T2: A1 = 120,0, Clock = 120MHz
Jan 4 08:58:52 (none) local0.err innominer_T2: start to read temp
Jan 4 08:59:52 (none) local0.warn innominer_T2: Started cgminer 4.10.0
Jan 4 08:59:52 (none) local0.info innominer_T2: hardware version is G19
Jan 4 08:59:52 (none) local0.info innominer_T2: miner type is T2
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 08:59:52 (none) local0.warn innominer_T2: A1: checking A1 chain
Jan 4 08:59:52 (none) local0.warn innominer_T2: SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
Jan 4 08:59:54 (none) local0.warn innominer_T2: SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
Jan 4 08:59:56 (none) local0.warn innominer_T2: SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
Jan 4 08:59:58 (none) local0.warn innominer_T2: SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
Jan 4 09:00:00 (none) local0.warn innominer_T2: SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
Jan 4 09:00:02 (none) local0.warn innominer_T2: SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
Jan 4 09:00:04 (none) local0.warn innominer_T2: SPI '/dev/spidev6.0': mode=1, bits=8, speed=1500000
Jan 4 09:00:06 (none) local0.warn innominer_T2: SPI '/dev/spidev7.0': mode=1, bits=8, speed=1500000
Jan 4 09:00:19 (none) local0.err innominer_T2: Plug Status[0] = 0
Jan 4 09:00:25 (none) local0.err innominer_T2: Plug Status[1] = 0
Jan 4 09:00:31 (none) local0.err innominer_T2: Plug Status[2] = 0
Jan 4 09:00:37 (none) local0.err innominer_T2: Plug Status[3] = 0
Jan 4 09:00:43 (none) local0.err innominer_T2: Plug Status[4] = 1
Jan 4 09:00:43 (none) local0.err innominer_T2: chain:4 the plat is not inserted
Jan 4 09:00:49 (none) local0.err innominer_T2: Plug Status[5] = 1
Jan 4 09:00:49 (none) local0.err innominer_T2: chain:5 the plat is not inserted
Jan 4 09:00:55 (none) local0.err innominer_T2: Plug Status[6] = 1
Jan 4 09:00:55 (none) local0.err innominer_T2: chain:6 the plat is not inserted
Jan 4 09:01:01 (none) local0.err innominer_T2: Plug Status[7] = 1
Jan 4 09:01:01 (none) local0.err innominer_T2: chain:7 the plat is not inserted
Jan 4 09:01:01 (none) local0.info innominer_T2: pre 0: A1 init chain
Jan 4 09:01:02 (none) local0.warn innominer_T2: 0: detected 72 chips
Jan 4 09:01:02 (none) local0.warn innominer_T2: collect core success
Jan 4 09:01:02 (none) local0.warn innominer_T2: 0: no A1 chip-chain detected
Jan 4 09:01:02 (none) local0.warn innominer_T2: spidev0.0: 0: Found 72 A1 chips
Jan 4 09:01:02 (none) local0.warn innominer_T2: Detected the 0 A1 chain with 72 chips
Jan 4 09:01:02 (none) local0.info innominer_T2: pre 1: A1 init chain
Jan 4 09:01:02 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 4 09:01:03 (none) local0.warn innominer_T2: cmd bist start: poll fail !
Jan 4 09:01:03 (none) local0.warn innominer_T2: bist start fail
Jan 4 09:01:03 (none) local0.err innominer_T2: init 1 A1 chain fail
Jan 4 09:01:03 (none) local0.info innominer_T2: pre 2: A1 init chain
Jan 4 09:01:04 (none) local0.warn innominer_T2: 2: detected 72 chips
Jan 4 09:01:04 (none) local0.warn innominer_T2: collect core success
Jan 4 09:01:04 (none) local0.warn innominer_T2: 2: no A1 chip-chain detected
Jan 4 09:01:04 (none) local0.warn innominer_T2: spidev2.0: 2: Found 72 A1 chips
Jan 4 09:01:04 (none) local0.warn innominer_T2: Detected the 2 A1 chain with 72 chips
Jan 4 09:01:04 (none) local0.info innominer_T2: pre 3: A1 init chain
Jan 4 09:01:05 (none) local0.warn innominer_T2: 3: detected 72 chips
Jan 4 09:01:05 (none) local0.warn innominer_T2: collect core success
Jan 4 09:01:05 (none) local0.warn innominer_T2: 3: no A1 chip-chain detected
Jan 4 09:01:05 (none) local0.warn innominer_T2: spidev3.0: 3: Found 72 A1 chips
Jan 4 09:01:05 (none) local0.warn innominer_T2: Detected the 3 A1 chain with 72 chips
Jan 4 09:01:05 (none) local0.info innominer_T2: start to configure all chain from 0 to 120
Jan 4 09:01:05 (none) local0.err innominer_T2: start to read temp
Jan 4 09:01:06 (none) local0.info innominer_T2: start to configure chain 0
Jan 4 09:01:06 (none) local0.notice innominer_T2: A1 = 120,0, Clock = 120MHz
Jan 4 09:01:06 (none) local0.err innominer_T2: start to read temp
Jan 4 09:02:09 (none) local0.warn innominer_T2: Started cgminer 4.10.0
Jan 4 09:02:09 (none) local0.info innominer_T2: hardware version is G19
Jan 4 09:02:09 (none) local0.info innominer_T2: miner type is T2
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:02:09 (none) local0.warn innominer_T2: A1: checking A1 chain
Jan 4 09:02:09 (none) local0.warn innominer_T2: SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:11 (none) local0.warn innominer_T2: SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:13 (none) local0.warn innominer_T2: SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:15 (none) local0.warn innominer_T2: SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:17 (none) local0.warn innominer_T2: SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:19 (none) local0.warn innominer_T2: SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:21 (none) local0.warn innominer_T2: SPI '/dev/spidev6.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:23 (none) local0.warn innominer_T2: SPI '/dev/spidev7.0': mode=1, bits=8, speed=1500000
Jan 4 09:02:36 (none) local0.err innominer_T2: Plug Status[0] = 0
Jan 4 09:02:42 (none) local0.err innominer_T2: Plug Status[1] = 0
Jan 4 09:02:48 (none) local0.err innominer_T2: Plug Status[2] = 0
Jan 4 09:02:54 (none) local0.err innominer_T2: Plug Status[3] = 0
Jan 4 09:03:00 (none) local0.err innominer_T2: Plug Status[4] = 1
Jan 4 09:03:00 (none) local0.err innominer_T2: chain:4 the plat is not inserted
Jan 4 09:03:06 (none) local0.err innominer_T2: Plug Status[5] = 1
Jan 4 09:03:06 (none) local0.err innominer_T2: chain:5 the plat is not inserted
Jan 4 09:03:12 (none) local0.err innominer_T2: Plug Status[6] = 1
Jan 4 09:03:12 (none) local0.err innominer_T2: chain:6 the plat is not inserted
Jan 4 09:03:18 (none) local0.err innominer_T2: Plug Status[7] = 1
Jan 4 09:03:18 (none) local0.err innominer_T2: chain:7 the plat is not inserted
Jan 4 09:03:18 (none) local0.info innominer_T2: pre 0: A1 init chain
Jan 4 09:03:19 (none) local0.warn innominer_T2: 0: detected 72 chips
Jan 4 09:03:19 (none) local0.warn innominer_T2: collect core success
Jan 4 09:03:19 (none) local0.warn innominer_T2: 0: no A1 chip-chain detected
Jan 4 09:03:19 (none) local0.warn innominer_T2: spidev0.0: 0: Found 72 A1 chips
Jan 4 09:03:19 (none) local0.warn innominer_T2: Detected the 0 A1 chain with 72 chips
Jan 4 09:03:19 (none) local0.info innominer_T2: pre 1: A1 init chain
Jan 4 09:03:19 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 4 09:03:20 (none) local0.warn innominer_T2: cmd bist start: poll fail !
Jan 4 09:03:20 (none) local0.warn innominer_T2: bist start fail
Jan 4 09:03:20 (none) local0.err innominer_T2: init 1 A1 chain fail
Jan 4 09:03:20 (none) local0.info innominer_T2: pre 2: A1 init chain
Jan 4 09:03:21 (none) local0.warn innominer_T2: 2: detected 72 chips
Jan 4 09:03:21 (none) local0.warn innominer_T2: collect core success
Jan 4 09:03:21 (none) local0.warn innominer_T2: 2: no A1 chip-chain detected
Jan 4 09:03:21 (none) local0.warn innominer_T2: spidev2.0: 2: Found 72 A1 chips
Jan 4 09:03:21 (none) local0.warn innominer_T2: Detected the 2 A1 chain with 72 chips
Jan 4 09:03:21 (none) local0.info innominer_T2: pre 3: A1 init chain
Jan 4 09:03:22 (none) local0.warn innominer_T2: 3: detected 72 chips
Jan 4 09:03:22 (none) local0.warn innominer_T2: collect core success
Jan 4 09:03:22 (none) local0.warn innominer_T2: 3: no A1 chip-chain detected
Jan 4 09:03:22 (none) local0.warn innominer_T2: spidev3.0: 3: Found 72 A1 chips
Jan 4 09:03:22 (none) local0.warn innominer_T2: Detected the 3 A1 chain with 72 chips
Jan 4 09:03:22 (none) local0.info innominer_T2: start to configure all chain from 0 to 120
Jan 4 09:03:22 (none) local0.err innominer_T2: start to read temp
Jan 4 09:03:23 (none) local0.info innominer_T2: start to configure chain 0
Jan 4 09:03:23 (none) local0.notice innominer_T2: A1 = 120,0, Clock = 120MHz
Jan 4 09:03:23 (none) local0.err innominer_T2: start to read temp
Jan 4 09:04:27 (none) auth.info login[1330]: root login on 'pts/0'
Jan 4 09:04:27 (none) local0.warn innominer_T2: Started cgminer 4.10.0
Jan 4 09:04:27 (none) local0.info innominer_T2: hardware version is G19
Jan 4 09:04:27 (none) local0.info innominer_T2: miner type is T2
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.notice innominer_T2: A1 = 1044,92, Clock = 1044MHz
Jan 4 09:04:27 (none) local0.warn innominer_T2: A1: checking A1 chain
Jan 4 09:04:27 (none) local0.warn innominer_T2: SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:29 (none) local0.warn innominer_T2: SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:31 (none) local0.warn innominer_T2: SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:33 (none) local0.warn innominer_T2: SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:35 (none) local0.warn innominer_T2: SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:37 (none) local0.warn innominer_T2: SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:39 (none) local0.warn innominer_T2: SPI '/dev/spidev6.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:41 (none) local0.warn innominer_T2: SPI '/dev/spidev7.0': mode=1, bits=8, speed=1500000
Jan 4 09:04:54 (none) local0.err innominer_T2: Plug Status[0] = 0
Jan 4 09:05:00 (none) local0.err innominer_T2: Plug Status[1] = 0
Jan 4 09:05:06 (none) local0.err innominer_T2: Plug Status[2] = 0
Jan 4 09:05:12 (none) local0.err innominer_T2: Plug Status[3] = 0
Jan 4 09:05:18 (none) local0.err innominer_T2: Plug Status[4] = 1
Jan 4 09:05:18 (none) local0.err innominer_T2: chain:4 the plat is not inserted
Jan 4 09:05:24 (none) local0.err innominer_T2: Plug Status[5] = 1
Jan 4 09:05:24 (none) local0.err innominer_T2: chain:5 the plat is not inserted
Jan 4 09:05:30 (none) local0.err innominer_T2: Plug Status[6] = 1
Jan 4 09:05:30 (none) local0.err innominer_T2: chain:6 the plat is not inserted
Jan 4 09:05:36 (none) local0.err innominer_T2: Plug Status[7] = 1
Jan 4 09:05:36 (none) local0.err innominer_T2: chain:7 the plat is not inserted
Jan 4 09:05:36 (none) local0.info innominer_T2: pre 0: A1 init chain
Jan 4 09:05:37 (none) local0.warn innominer_T2: 0: detected 72 chips
Jan 4 09:05:37 (none) local0.warn innominer_T2: collect core success
Jan 4 09:05:37 (none) local0.warn innominer_T2: 0: no A1 chip-chain detected
Jan 4 09:05:37 (none) local0.warn innominer_T2: spidev0.0: 0: Found 72 A1 chips
Jan 4 09:05:37 (none) local0.warn innominer_T2: Detected the 0 A1 chain with 72 chips
Jan 4 09:05:37 (none) local0.info innominer_T2: pre 1: A1 init chain
Jan 4 09:05:37 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 4 09:05:38 (none) local0.warn innominer_T2: cmd bist start: poll fail !
Jan 4 09:05:38 (none) local0.warn innominer_T2: bist start fail
Jan 4 09:05:38 (none) local0.err innominer_T2: init 1 A1 chain fail
Jan 4 09:05:38 (none) local0.info innominer_T2: pre 2: A1 init chain
Jan 4 09:05:39 (none) local0.warn innominer_T2: 2: detected 72 chips
Jan 4 09:05:39 (none) local0.warn innominer_T2: collect core success
Jan 4 09:05:39 (none) local0.warn innominer_T2: 2: no A1 chip-chain detected
Jan 4 09:05:39 (none) local0.warn innominer_T2: spidev2.0: 2: Found 72 A1 chips
Jan 4 09:05:39 (none) local0.warn innominer_T2: Detected the 2 A1 chain with 72 chips
Jan 4 09:05:39 (none) local0.info innominer_T2: pre 3: A1 init chain
Jan 4 09:05:40 (none) local0.warn innominer_T2: 3: detected 72 chips
Jan 4 09:05:40 (none) local0.warn innominer_T2: collect core success
Jan 4 09:05:40 (none) local0.warn innominer_T2: 3: no A1 chip-chain detected
Jan 4 09:05:40 (none) local0.warn innominer_T2: spidev3.0: 3: Found 72 A1 chips
Jan 4 09:05:40 (none) local0.warn innominer_T2: Detected the 3 A1 chain with 72 chips
Jan 4 09:05:40 (none) local0.info innominer_T2: start to configure all chain from 0 to 120
Jan 4 09:05:40 (none) local0.err innominer_T2: start to read temp
Jan 4 09:05:40 (none) local0.info innominer_T2: start to configure chain 0
Jan 4 09:05:40 (none) local0.notice innominer_T2: A1 = 120,0, Clock = 120MHz
Jan 4 09:05:41 (none) local0.err innominer_T2: start to read temp
I've tried:
Reflashing firmware
restoring factory defaults
re-saving all pools
checking /lib/python3.4/_sysconfigdata.py for corruption
more logs that might help, this shows where it craps out
Code:
innominer_T2 --debug
[2018-01-04 11:30:28.195] Started cgminer 4.10.0
[2018-01-04 11:30:28.195] A1 detect
[2018-01-04 11:30:28.195] hardware version is G19
[2018-01-04 11:30:28.196] miner type is T2
pwm name:/dev/pwmgen0.0.
pwm step:5.
duty max: 100.
targ freq:20000.
freq rate:20000.
fan speed thrd:100.
fan up thrd:55.
fan down thrd:35.
auto_fan true, fan_speed 1
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.198] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.198] A1: checking A1 chain
[2018-01-04 11:30:28.198] SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:30.199] SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:32.200] SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:34.201] SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:36.203] SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:38.204] SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:40.205] SPI '/dev/spidev6.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:42.206] SPI '/dev/spidev7.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:55.207] Plug Status[0] = 0
[2018-01-04 11:31:01.208] Plug Status[1] = 0
[2018-01-04 11:31:07.209] Plug Status[2] = 0
[2018-01-04 11:31:13.209] Plug Status[3] = 0
[2018-01-04 11:31:19.210] Plug Status[4] = 1
[2018-01-04 11:31:19.210] chain:4 the plat is not inserted
[2018-01-04 11:31:25.211] Plug Status[5] = 1
[2018-01-04 11:31:25.211] chain:5 the plat is not inserted
[2018-01-04 11:31:31.211] Plug Status[6] = 1
[2018-01-04 11:31:31.211] chain:6 the plat is not inserted
[2018-01-04 11:31:37.212] Plug Status[7] = 1
[2018-01-04 11:31:37.212] chain:7 the plat is not inserted
[2018-01-04 11:31:37.212] pre 0: A1 init chain
send command [reset]
send command [bist_start]
[2018-01-04 11:31:38.222] 0: detected 72 chips
send command [bist_collect]
[2018-01-04 11:31:38.239] collect core success
[2018-01-04 11:31:38.239] 0: no A1 chip-chain detected
[2018-01-04 11:31:38.249] spidev0.0: 0: Found 72 A1 chips
[2018-01-04 11:31:38.249] Detected the 0 A1 chain with 72 chips
set_vid_value_g19:1,chain 0.
[2018-01-04 11:31:38.249] pre 1: A1 init chain
send command [reset]
[2018-01-04 11:31:38.255] cmd reset: poll fail !
send command [bist_start]
[2018-01-04 11:31:39.262] cmd bist start: poll fail !
[2018-01-04 11:31:39.262] bist start fail
[2018-01-04 11:31:39.272] init 1 A1 chain fail
[2018-01-04 11:31:39.272] pre 2: A1 init chain
send command [reset]
send command [bist_start]
[2018-01-04 11:31:40.284] 2: detected 72 chips
send command [bist_collect]
[2018-01-04 11:31:40.301] collect core success
[2018-01-04 11:31:40.301] 2: no A1 chip-chain detected
[2018-01-04 11:31:40.311] spidev2.0: 2: Found 72 A1 chips
[2018-01-04 11:31:40.311] Detected the 2 A1 chain with 72 chips
set_vid_value_g19:1,chain 2.
[2018-01-04 11:31:40.311] pre 3: A1 init chain
send command [reset]
send command [bist_start]
[2018-01-04 11:31:41.323] 3: detected 72 chips
send command [bist_collect]
[2018-01-04 11:31:41.340] collect core success
[2018-01-04 11:31:41.340] 3: no A1 chip-chain detected
[2018-01-04 11:31:41.350] spidev3.0: 3: Found 72 A1 chips
[2018-01-04 11:31:41.350] Detected the 3 A1 chain with 72 chips
set_vid_value_g19:1,chain 3.
[2018-01-04 11:31:41.350] start to configure all chain from 0 to 120
[2018-01-04 11:31:41.351] start to read temp
[2018-01-04 11:31:41.785] start to configure chain 0
[2018-01-04 11:31:41.786] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:31:41.912] start to read temp
Segmentation fault
[2018-01-04 11:30:28.195] Started cgminer 4.10.0
[2018-01-04 11:30:28.195] A1 detect
[2018-01-04 11:30:28.195] hardware version is G19
[2018-01-04 11:30:28.196] miner type is T2
pwm name:/dev/pwmgen0.0.
pwm step:5.
duty max: 100.
targ freq:20000.
freq rate:20000.
fan speed thrd:100.
fan up thrd:55.
fan down thrd:35.
auto_fan true, fan_speed 1
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.197] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.198] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:30:28.198] A1: checking A1 chain
[2018-01-04 11:30:28.198] SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:30.199] SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:32.200] SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:34.201] SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:36.203] SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:38.204] SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:40.205] SPI '/dev/spidev6.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:42.206] SPI '/dev/spidev7.0': mode=1, bits=8, speed=1500000
[2018-01-04 11:30:55.207] Plug Status[0] = 0
[2018-01-04 11:31:01.208] Plug Status[1] = 0
[2018-01-04 11:31:07.209] Plug Status[2] = 0
[2018-01-04 11:31:13.209] Plug Status[3] = 0
[2018-01-04 11:31:19.210] Plug Status[4] = 1
[2018-01-04 11:31:19.210] chain:4 the plat is not inserted
[2018-01-04 11:31:25.211] Plug Status[5] = 1
[2018-01-04 11:31:25.211] chain:5 the plat is not inserted
[2018-01-04 11:31:31.211] Plug Status[6] = 1
[2018-01-04 11:31:31.211] chain:6 the plat is not inserted
[2018-01-04 11:31:37.212] Plug Status[7] = 1
[2018-01-04 11:31:37.212] chain:7 the plat is not inserted
[2018-01-04 11:31:37.212] pre 0: A1 init chain
send command [reset]
send command [bist_start]
[2018-01-04 11:31:38.222] 0: detected 72 chips
send command [bist_collect]
[2018-01-04 11:31:38.239] collect core success
[2018-01-04 11:31:38.239] 0: no A1 chip-chain detected
[2018-01-04 11:31:38.249] spidev0.0: 0: Found 72 A1 chips
[2018-01-04 11:31:38.249] Detected the 0 A1 chain with 72 chips
set_vid_value_g19:1,chain 0.
[2018-01-04 11:31:38.249] pre 1: A1 init chain
send command [reset]
[2018-01-04 11:31:38.255] cmd reset: poll fail !
send command [bist_start]
[2018-01-04 11:31:39.262] cmd bist start: poll fail !
[2018-01-04 11:31:39.262] bist start fail
[2018-01-04 11:31:39.272] init 1 A1 chain fail
[2018-01-04 11:31:39.272] pre 2: A1 init chain
send command [reset]
send command [bist_start]
[2018-01-04 11:31:40.284] 2: detected 72 chips
send command [bist_collect]
[2018-01-04 11:31:40.301] collect core success
[2018-01-04 11:31:40.301] 2: no A1 chip-chain detected
[2018-01-04 11:31:40.311] spidev2.0: 2: Found 72 A1 chips
[2018-01-04 11:31:40.311] Detected the 2 A1 chain with 72 chips
set_vid_value_g19:1,chain 2.
[2018-01-04 11:31:40.311] pre 3: A1 init chain
send command [reset]
send command [bist_start]
[2018-01-04 11:31:41.323] 3: detected 72 chips
send command [bist_collect]
[2018-01-04 11:31:41.340] collect core success
[2018-01-04 11:31:41.340] 3: no A1 chip-chain detected
[2018-01-04 11:31:41.350] spidev3.0: 3: Found 72 A1 chips
[2018-01-04 11:31:41.350] Detected the 3 A1 chain with 72 chips
set_vid_value_g19:1,chain 3.
[2018-01-04 11:31:41.350] start to configure all chain from 0 to 120
[2018-01-04 11:31:41.351] start to read temp
[2018-01-04 11:31:41.785] start to configure chain 0
[2018-01-04 11:31:41.786] A1 = 120,0, Clock = 120MHz
[2018-01-04 11:31:41.912] start to read temp
Segmentation fault
Im lost once I got to the third paragraph... will see if innosilicon gets back to me..
I'm addicted to these things, so I've been having fun editing things in them. Not surprised that others don't do the same.Inno might help, I guess... No one's ever reported back saying "inno fixed it yay"
Try resaving your pools and bumping up or putting on auto the voltages again. Maybe it will fix a broken config file.
sorry for disturbing, I've just got my a4+ today, I've checked in the overview, I see it's as below:
A4+
Hw Version G19
DNA 0x1488076484c2c1
MAC Addr 50:6c:be:08:76:9f
Build Date Wed Nov 22 09:30:31 CST 2017
May I know which firmware is the most stable one? or if there is any other newer and stable firmware available please? should I upgrade it?. Thanks.
A4+
Hw Version G19
DNA 0x1488076484c2c1
MAC Addr 50:6c:be:08:76:9f
Build Date Wed Nov 22 09:30:31 CST 2017
May I know which firmware is the most stable one? or if there is any other newer and stable firmware available please? should I upgrade it?. Thanks.
According to inno they keep screwing up the firmware and it burns out the thing, so at least Dec 20th firmware.
just remember the root password changed to t1t2t3a5 with the Dec 20th firmware.
I have some running Dec20th and Dec29th. both seem similarly okay.
Thx Gazdac2
I rebooted and waited 5 min, then I telneted in ran the command, this is what I get.
I also did a test, ran the same command after another reboot (thx for the command) at about 30 sec after the start, when the fan speed reduced (just under 3min), and at 5 min. Prior to 5 min, I got the string of codes like yours with the pool information, but after 5 min, I get the same code as above.
I rebooted and waited 5 min, then I telneted in ran the command, this is what I get.
Code:
(none) login: root
Password:
root@miner~:
ps|grep innominer
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1
024 -b 5
1181 root 0:00 grep innominer
root@miner~:
Password:
root@miner~:
ps|grep innominer
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1
024 -b 5
1181 root 0:00 grep innominer
root@miner~:
I also did a test, ran the same command after another reboot (thx for the command) at about 30 sec after the start, when the fan speed reduced (just under 3min), and at 5 min. Prior to 5 min, I got the string of codes like yours with the pool information, but after 5 min, I get the same code as above.
Yep, that's bad. Mine never actually exits, it just loops around if it fails. Sometimes forever... but never actually closes.
you can watch the logs with tail, or go further back in the log with -500 or -10000 or whatever to see when it stopped.
whenever you "save" the pools on the webui I believe it rebuilds the run.sh you could try that. I think it also runs a different string if you have 2 pools instead of one. save one pool and try, save 2 pools ( even if the same) and try. and if not... then digging through those config files and python files.
Im lost once I got to the third paragraph... will see if innosilicon gets back to me..
I think T3 is for the A5 miner, so here is stuff that works for my A4+
When you first telnet to the miner (192.168.1.xxx:8100) and login (root:t1t2t3a5)
Check if it is even trying to mine (ps|grep innominer)
it should look the same as a properly configured launch string i.e. (minus the bit on the end):
innominer_T2 -o stratum+tcp://scrypt.mine.zpool.ca:3433 -u 1BPiRf942duu8AqFQGoRVwz4WGHn3APLm8 -p "c=BTC" -o stratum+tcp://hub.miningpoolhub.com:12001 -u gazdac.201 -p "x" --A1Pll1 1100 --A1Pll2 1100 --A1Pll3 1100 --A1Pll4 1100 --A1Pll5 1100 --A1Pll6 1100 --A1Pll7 1100 --A1Pll8 1100 --A1Vol1 18 --A1Vol2 18 --A1Vol3 18 --A1Vol4 18 --A1Vol5 18 --A1Vol6 18 --A1Vol7 18 --A1Vol8 18 --A1Fanmode 1 --A1Fanspd 3 --api-listen --syslog >/dev/null 2>&1
note this launch string resides in: /tmp/run.sh whenever you want to restart the miner just type (/tmp/run.sh) and it will restart the process (5 minute start up time)
If it isn't running and/or your launch string is not correct you have to fix the python config files (see 2)
(1)If it is running you can watch the logs real time (tail -50 /tmp/log/innominer.log -f) (remember to ctrl+c to stop watching) you won't see it in the webui unless you get all the way to starting mining (5+ minutes)
I have no idea what to do if it is running and configured properly, other than up the voltages (lower number)
(2)so if you run /tmp/run.sh is wrong or it isn't in ps at all. then config is screwed up.
To transfer files I just copied and pasted the broken parts.
Looks like it has ftp available as well.
https://busybox.net/downloads/BusyBox.html
look for ftpd or ftpget/ftpput
remember you have to mount / -o rw,remount to edit files
uhh this was TMI for everyone probably. just confusing you all more.
Below is the debug log, I'm assuming this is not good.
For Newbies: I telnet in, and use the 1st and 3rd line to run the debug.
For Newbies: I telnet in, and use the 1st and 3rd line to run the debug.
Code:
cd /bin
root@miner/bin:
./innominer_T3 --debug
:)
root@miner/bin:
./innominer_T3 --debug
:)
I think T3 is for the A5 miner, so here is stuff that works for my A4+
When you first telnet to the miner (192.168.1.xxx:8100) and login (root:t1t2t3a5)
Check if it is even trying to mine (ps|grep innominer)
it should look the same as a properly configured launch string i.e. (minus the bit on the end):
innominer_T2 -o stratum+tcp://scrypt.mine.zpool.ca:3433 -u 1BPiRf942duu8AqFQGoRVwz4WGHn3APLm8 -p "c=BTC" -o stratum+tcp://hub.miningpoolhub.com:12001 -u gazdac.201 -p "x" --A1Pll1 1100 --A1Pll2 1100 --A1Pll3 1100 --A1Pll4 1100 --A1Pll5 1100 --A1Pll6 1100 --A1Pll7 1100 --A1Pll8 1100 --A1Vol1 18 --A1Vol2 18 --A1Vol3 18 --A1Vol4 18 --A1Vol5 18 --A1Vol6 18 --A1Vol7 18 --A1Vol8 18 --A1Fanmode 1 --A1Fanspd 3 --api-listen --syslog >/dev/null 2>&1
note this launch string resides in: /tmp/run.sh whenever you want to restart the miner just type (/tmp/run.sh) and it will restart the process (5 minute start up time)
If it isn't running and/or your launch string is not correct you have to fix the python config files (see 2)
(1)If it is running you can watch the logs real time (tail -50 /tmp/log/innominer.log -f) (remember to ctrl+c to stop watching) you won't see it in the webui unless you get all the way to starting mining (5+ minutes)
I have no idea what to do if it is running and configured properly, other than up the voltages (lower number)
(2)so if you run /tmp/run.sh is wrong or it isn't in ps at all. then config is screwed up.
For those that might have the same problem. Looks like my a4+ corrupted files during a reboot then stopped working.
/home/inno_tools/start_miner.py
The damn thing deleted a couple characters and killed itself.
Here's what the file looked like
vi /lib/python3.4/_sysconfigdata.py...
'HAVE_GETLOGIN': 1,
'HAVE_GETNAMEINFO': 1,
'HAVE_GETPAGESIZE': 1,
E_GETPEERNAME': 1,
'HAVE_GETPGID': 1,
'HAVE_GETPGRP': 1,
...
There might have been more errors, i dunno. I coped the file from another miner and now it works.
Symptoms were the HTTP control page loading, but not showing any data e.g. not showing me "miner type" under system.
I found the file by manually running each of the commands in /etc/init.d/rcS
Good luck to the rest of you.
/home/inno_tools/start_miner.py
The damn thing deleted a couple characters and killed itself.
Here's what the file looked like
vi /lib/python3.4/_sysconfigdata.py...
'HAVE_GETLOGIN': 1,
'HAVE_GETNAMEINFO': 1,
'HAVE_GETPAGESIZE': 1,
E_GETPEERNAME': 1,
'HAVE_GETPGID': 1,
'HAVE_GETPGRP': 1,
...
There might have been more errors, i dunno. I coped the file from another miner and now it works.
Symptoms were the HTTP control page loading, but not showing any data e.g. not showing me "miner type" under system.
I found the file by manually running each of the commands in /etc/init.d/rcS
Good luck to the rest of you.
To transfer files I just copied and pasted the broken parts.
Looks like it has ftp available as well.
https://busybox.net/downloads/BusyBox.html
look for ftpd or ftpget/ftpput
remember you have to mount / -o rw,remount to edit files
uhh this was TMI for everyone probably. just confusing you all more.
sorry for disturbing, I've just got my a4+ today, I've checked in the overview, I see it's as below:
A4+
Hw Version G19
DNA 0x1488076484c2c1
MAC Addr 50:6c:be:08:76:9f
Build Date Wed Nov 22 09:30:31 CST 2017
May I know which firmware is the most stable one? or if there is any other newer and stable firmware available please? should I upgrade it?. Thanks.
A4+
Hw Version G19
DNA 0x1488076484c2c1
MAC Addr 50:6c:be:08:76:9f
Build Date Wed Nov 22 09:30:31 CST 2017
May I know which firmware is the most stable one? or if there is any other newer and stable firmware available please? should I upgrade it?. Thanks.
Thx Gazdac2
I rebooted and waited 5 min, then I telneted in ran the command, this is what I get.
I also did a test, ran the same command after another reboot (thx for the command) at about 30 sec after the start, when the fan speed reduced (just under 3min), and at 5 min. Prior to 5 min, I got the string of codes like yours with the pool information, but after 5 min, I get the same code as above.
I rebooted and waited 5 min, then I telneted in ran the command, this is what I get.
Code:
(none) login: root
Password:
root@miner~:
ps|grep innominer
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1
024 -b 5
1181 root 0:00 grep innominer
root@miner~:
Password:
root@miner~:
ps|grep innominer
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1
024 -b 5
1181 root 0:00 grep innominer
root@miner~:
I also did a test, ran the same command after another reboot (thx for the command) at about 30 sec after the start, when the fan speed reduced (just under 3min), and at 5 min. Prior to 5 min, I got the string of codes like yours with the pool information, but after 5 min, I get the same code as above.
Below is the debug log, I'm assuming this is not good.
For Newbies: I telnet in, and use the 1st and 3rd line to run the debug.
For Newbies: I telnet in, and use the 1st and 3rd line to run the debug.
Code:
cd /bin
root@miner/bin:
./innominer_T3 --debug
:)
root@miner/bin:
./innominer_T3 --debug
:)
I think T3 is for the A5 miner, so here is stuff that works for my A4+
When you first telnet to the miner (192.168.1.xxx:8100) and login (root:t1t2t3a5)
Check if it is even trying to mine (ps|grep innominer)
it should look the same as a properly configured launch string i.e. (minus the bit on the end):
innominer_T2 -o stratum+tcp://scrypt.mine.zpool.ca:3433 -u 1BPiRf942duu8AqFQGoRVwz4WGHn3APLm8 -p "c=BTC" -o stratum+tcp://hub.miningpoolhub.com:12001 -u gazdac.201 -p "x" --A1Pll1 1100 --A1Pll2 1100 --A1Pll3 1100 --A1Pll4 1100 --A1Pll5 1100 --A1Pll6 1100 --A1Pll7 1100 --A1Pll8 1100 --A1Vol1 18 --A1Vol2 18 --A1Vol3 18 --A1Vol4 18 --A1Vol5 18 --A1Vol6 18 --A1Vol7 18 --A1Vol8 18 --A1Fanmode 1 --A1Fanspd 3 --api-listen --syslog >/dev/null 2>&1
note this launch string resides in: /tmp/run.sh whenever you want to restart the miner just type (/tmp/run.sh) and it will restart the process (5 minute start up time)
If it isn't running and/or your launch string is not correct you have to fix the python config files (see 2)
(1)If it is running you can watch the logs real time (tail -50 /tmp/log/innominer.log -f) (remember to ctrl+c to stop watching) you won't see it in the webui unless you get all the way to starting mining (5+ minutes)
I have no idea what to do if it is running and configured properly, other than up the voltages (lower number)
(2)so if you run /tmp/run.sh is wrong or it isn't in ps at all. then config is screwed up.
For those that might have the same problem. Looks like my a4+ corrupted files during a reboot then stopped working.
/home/inno_tools/start_miner.py
The damn thing deleted a couple characters and killed itself.
Here's what the file looked like
vi /lib/python3.4/_sysconfigdata.py...
'HAVE_GETLOGIN': 1,
'HAVE_GETNAMEINFO': 1,
'HAVE_GETPAGESIZE': 1,
E_GETPEERNAME': 1,
'HAVE_GETPGID': 1,
'HAVE_GETPGRP': 1,
...
There might have been more errors, i dunno. I coped the file from another miner and now it works.
Symptoms were the HTTP control page loading, but not showing any data e.g. not showing me "miner type" under system.
I found the file by manually running each of the commands in /etc/init.d/rcS
Good luck to the rest of you.
/home/inno_tools/start_miner.py
The damn thing deleted a couple characters and killed itself.
Here's what the file looked like
vi /lib/python3.4/_sysconfigdata.py...
'HAVE_GETLOGIN': 1,
'HAVE_GETNAMEINFO': 1,
'HAVE_GETPAGESIZE': 1,
E_GETPEERNAME': 1,
'HAVE_GETPGID': 1,
'HAVE_GETPGRP': 1,
...
There might have been more errors, i dunno. I coped the file from another miner and now it works.
Symptoms were the HTTP control page loading, but not showing any data e.g. not showing me "miner type" under system.
I found the file by manually running each of the commands in /etc/init.d/rcS
Good luck to the rest of you.
To transfer files I just copied and pasted the broken parts.
Looks like it has ftp available as well.
https://busybox.net/downloads/BusyBox.html
look for ftpd or ftpget/ftpput
remember you have to mount / -o rw,remount to edit files
uhh this was TMI for everyone probably. just confusing you all more.
I'm really an illiterate when it comes to tech. the miner status just keeps spinning and not even loading anything..
is there a way where I can copy the files from the working A4+ to the not working one? I do suspect its the software issue.
What's your System Version info, mine are:
Miner Type: 17
Hw Version: G19
Build Date: Thur Dec 21 17:56:17 CST 2017
Platform Version: 810e0c2934044ec019b1d929d3de1f3c899b6410
Rootfs Version: 4973e48bd7ab0bb58688ce4845bd7b2b532429f7
Mine is the same 17 and G19 just the date is 29 dec instead
I'm on the same Build Date as you, found the 17-12-29 build off the support site. The good thing now, it doesn't sound like a drone trying to take off.
Weird thing, on their support site, their screenshots shows "Cgminer Version" "Sgminer Version" mine does not, does yours?
is there a way where I can copy the files from the working A4+ to the not working one? I do suspect its the software issue.
Same here miner status is constantly loading.. no hash rate showed at the pool. Tried to upgrade the software but it stops at 10% and when u refresh the page its gone.
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
What's your System Version info, mine are:
Miner Type: 17
Hw Version: G19
Build Date: Thur Dec 21 17:56:17 CST 2017
Platform Version: 810e0c2934044ec019b1d929d3de1f3c899b6410
Rootfs Version: 4973e48bd7ab0bb58688ce4845bd7b2b532429f7
Mine is the same 17 and G19 just the date is 29 dec instead
I'm on the same Build Date as you, found the 17-12-29 build off the support site. The good thing now, it doesn't sound like a drone trying to take off.
Weird thing, on their support site, their screenshots shows "Cgminer Version" "Sgminer Version" mine does not, does yours?
Below is the debug log, I'm assuming this is not good.
For Newbies: I telnet in, and use the 1st and 3rd line to run the debug.
For Newbies: I telnet in, and use the 1st and 3rd line to run the debug.
Code:
cd /bin
root@miner/bin:
./innominer_T3 --debug
[1970-01-01 00:09:08] Started sgminer 4.4.2
[1970-01-01 00:09:08] A1 detect
[1970-01-01 00:09:08] hardware version is G19
[1970-01-01 00:09:08] miner type is T2
[ERRO:1970-01-01 00:09:08.331] set fan speed 80
[DEBG:1970-01-01 00:09:08.331] pwm name:/dev/pwmgen0.0.
[DEBG:1970-01-01 00:09:08.331] pwm step:5.
[DEBG:1970-01-01 00:09:08.331] duty max: 100.
[DEBG:1970-01-01 00:09:08.332] targ freq:20000.
[DEBG:1970-01-01 00:09:08.332] freq rate:20000.
[DEBG:1970-01-01 00:09:08.332] fan speed thrd:100.
[DEBG:1970-01-01 00:09:08.332] fan up thrd:55.
[DEBG:1970-01-01 00:09:08.332] fan down thrd:35.
[DEBG:1970-01-01 00:09:08.332] auto_fan true, fan_speed 1
[1970-01-01 00:09:58] A1: checking A1 chain 8,8,8,8,8,8,8,8
[1970-01-01 00:09:58] SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:09:59] SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:00] SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:01] SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:02] SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:03] SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:09] spi init
[1970-01-01 00:10:15] Plug Status[0] = 0
[1970-01-01 00:10:21] Plug Status[1] = 0
[1970-01-01 00:10:27] Plug Status[2] = 0
[1970-01-01 00:10:33] Plug Status[3] = 0
[1970-01-01 00:10:39] Plug Status[4] = 1
[1970-01-01 00:10:45] Plug Status[5] = 1
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
[1970-01-01 00:10:45] 0: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 1: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 2: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 3: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 4: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 5: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] pre init_pll...
[ERRO:1970-01-01 00:10:46.789] set fan speed 30
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] reload init a1 chain0 fail
[1970-01-01 00:10:46] reload init a1 chain1 fail
[1970-01-01 00:10:46] reload init a1 chain2 fail
[1970-01-01 00:10:46] reload init a1 chain3 fail
[1970-01-01 00:10:46] reload init a1 chain4 fail
[1970-01-01 00:10:46] reload init a1 chain5 fail
[1970-01-01 00:10:46] A1 dectect finish
[1970-01-01 00:10:46] All devices disabled, cannot mine!
root@miner/bin:
root@miner/bin:
./innominer_T3 --debug
[1970-01-01 00:09:08] Started sgminer 4.4.2
[1970-01-01 00:09:08] A1 detect
[1970-01-01 00:09:08] hardware version is G19
[1970-01-01 00:09:08] miner type is T2
[ERRO:1970-01-01 00:09:08.331] set fan speed 80
[DEBG:1970-01-01 00:09:08.331] pwm name:/dev/pwmgen0.0.
[DEBG:1970-01-01 00:09:08.331] pwm step:5.
[DEBG:1970-01-01 00:09:08.331] duty max: 100.
[DEBG:1970-01-01 00:09:08.332] targ freq:20000.
[DEBG:1970-01-01 00:09:08.332] freq rate:20000.
[DEBG:1970-01-01 00:09:08.332] fan speed thrd:100.
[DEBG:1970-01-01 00:09:08.332] fan up thrd:55.
[DEBG:1970-01-01 00:09:08.332] fan down thrd:35.
[DEBG:1970-01-01 00:09:08.332] auto_fan true, fan_speed 1
[1970-01-01 00:09:58] A1: checking A1 chain 8,8,8,8,8,8,8,8
[1970-01-01 00:09:58] SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:09:59] SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:00] SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:01] SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:02] SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:03] SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:09] spi init
[1970-01-01 00:10:15] Plug Status[0] = 0
[1970-01-01 00:10:21] Plug Status[1] = 0
[1970-01-01 00:10:27] Plug Status[2] = 0
[1970-01-01 00:10:33] Plug Status[3] = 0
[1970-01-01 00:10:39] Plug Status[4] = 1
[1970-01-01 00:10:45] Plug Status[5] = 1
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
[1970-01-01 00:10:45] 0: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 1: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 2: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 3: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 4: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 5: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] pre init_pll...
[ERRO:1970-01-01 00:10:46.789] set fan speed 30
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] reload init a1 chain0 fail
[1970-01-01 00:10:46] reload init a1 chain1 fail
[1970-01-01 00:10:46] reload init a1 chain2 fail
[1970-01-01 00:10:46] reload init a1 chain3 fail
[1970-01-01 00:10:46] reload init a1 chain4 fail
[1970-01-01 00:10:46] reload init a1 chain5 fail
[1970-01-01 00:10:46] A1 dectect finish
[1970-01-01 00:10:46] All devices disabled, cannot mine!
root@miner/bin:
Same here miner status is constantly loading.. no hash rate showed at the pool. Tried to upgrade the software but it stops at 10% and when u refresh the page its gone.
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
What's your System Version info, mine are:
Miner Type: 17
Hw Version: G19
Build Date: Thur Dec 21 17:56:17 CST 2017
Platform Version: 810e0c2934044ec019b1d929d3de1f3c899b6410
Rootfs Version: 4973e48bd7ab0bb58688ce4845bd7b2b532429f7
Mine is the same 17 and G19 just the date is 29 dec instead
I'm on the same Build Date as you, found the 17-12-29 build off the support site. The good thing now, it doesn't sound like a drone trying to take off.
Weird thing, on their support site, their screenshots shows "Cgminer Version" "Sgminer Version" mine does not, does yours? Same here miner status is constantly loading.. no hash rate showed at the pool. Tried to upgrade the software but it stops at 10% and when u refresh the page its gone.
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
What's your System Version info, mine are:
Miner Type: 17
Hw Version: G19
Build Date: Thur Dec 21 17:56:17 CST 2017
Platform Version: 810e0c2934044ec019b1d929d3de1f3c899b6410
Rootfs Version: 4973e48bd7ab0bb58688ce4845bd7b2b532429f7
Mine is the same 17 and G19 just the date is 29 dec instead
Same here miner status is constantly loading.. no hash rate showed at the pool. Tried to upgrade the software but it stops at 10% and when u refresh the page its gone.
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
What's your System Version info, mine are:
Miner Type: 17
Hw Version: G19
Build Date: Thur Dec 21 17:56:17 CST 2017
Platform Version: 810e0c2934044ec019b1d929d3de1f3c899b6410
Rootfs Version: 4973e48bd7ab0bb58688ce4845bd7b2b532429f7
Same here miner status is constantly loading.. no hash rate showed at the pool. Tried to upgrade the software but it stops at 10% and when u refresh the page its gone.
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
New Miner - just got the Innosilicon A4+ LTC Master hooked up to a Bitmain APW3++ (110) and plugged directly into my AT&T Uverse Modem/Router. I've followed the direction from the OP, (upgraded firmware, enter my pool info - Litecoinpool) I have not gone into the Advance Config and change the inno_config.py file. I've also enabled pass through the AT&T modem/router for litecoinpool's ports-TCP 3333 & 8080), been running for over 2 hours. I did have to change the A4+'s IP as it was the same as the modem/router.
Question: How do I know if I'm connected and mining in the pool? Issues, Miner Status Overview does not show me anything, I get the spinning flower fore Summery, InnoMiner, and Pools. Also, my litecoinpool accounts page shows all zeros, if connect, when should you start seeing data?
TIA.
EDIT: Using latest firmware as it works with the Dec 22 Password.
Question: How do I know if I'm connected and mining in the pool? Issues, Miner Status Overview does not show me anything, I get the spinning flower fore Summery, InnoMiner, and Pools. Also, my litecoinpool accounts page shows all zeros, if connect, when should you start seeing data?
TIA.
EDIT: Using latest firmware as it works with the Dec 22 Password.
some overclock this miner?
and what is the normal/best temperature for the miner?
and what is the normal/best temperature for the miner?
I *think* they had a TF port, I'm not physically near the machines so can't double check.
Power is good - they're hosted in a data center using Innosilicon PSU
I've submitted a ticket to Innosilicon - see what they say.
Heh, yeah TF port.Power is good - they're hosted in a data center using Innosilicon PSU
I've submitted a ticket to Innosilicon - see what they say.
When I first got mine I took my shiny new SD card with the new firmware( Just like the instructions say on the website) on it and put in the slot and. *plunk*, it just fell in the hole. No actual port, just a hole.
GL, majorly suspicious if you ended up with 3 failures, with a total of 12 cards broken.
Then again parts of mine look like they were physically dunked in water before sending to me.
I had to chase them for the confirmation it took about 10 days
open the case on their website
and send Emails to
[email protected],
[email protected],
[email protected],
[email protected]
with your order number
open the case on their website
and send Emails to
[email protected],
[email protected],
[email protected],
[email protected]
with your order number
I've emailed all of those emails multiple times and still nothing. I wired the rest of my money over a month ago and haven't heard diddly. Anyone have a better way of getting a hold of these people?!
That's how my entire ordering process went. My email to tell them that the just lost my future business was replied with "here is tracking number xxxxx"
Funny how they could ship "immediately" if you ordered on Christmas, so I am guessing you are just forgotten. I think the replies came after sending to miner_sales and shupp. Did they even confirm your payment, and request your mailing address? Guess you can always email miner support and say "my miners are not working, since they are not physically present. Please send replacements."
I had to chase them for the confirmation it took about 10 days
open the case on their website
and send Emails to
[email protected],
[email protected],
[email protected],
[email protected]
with your order number
open the case on their website
and send Emails to
[email protected],
[email protected],
[email protected],
[email protected]
with your order number
I've emailed all of those emails multiple times and still nothing. I wired the rest of my money over a month ago and haven't heard diddly. Anyone have a better way of getting a hold of these people?!
I *think* they had a TF port, I'm not physically near the machines so can't double check.
Power is good - they're hosted in a data center using Innosilicon PSU
I've submitted a ticket to Innosilicon - see what they say.
Power is good - they're hosted in a data center using Innosilicon PSU
I've submitted a ticket to Innosilicon - see what they say.
Jump to: