Hello,
Can anybody help me?
Today i have become 2 Miners!
The First work Fine, The Second have no Green Lights on The Board and on The Front is The Red led on and a Little Bit The Green led. But The Fans Not work and i become no Connection. I have pur The reset, After that The Fans work for The Time i press The reset Button.
best rgds
Topic: Innosilicon A4+ setup tutorial - page 6. (Read 6792 times)
Hi all
I have some problem with a5 after reboot.
Symptoms were the HTTP control page loading, but not showing any data e.g. not showing me "miner type" under system.
Manually running each of the commands in /etc/init.d/rcS
The problem in "python3.4 /home/inno_daemon/MServer.py"
I have some problem with a5 after reboot.
Symptoms were the HTTP control page loading, but not showing any data e.g. not showing me "miner type" under system.
Manually running each of the commands in /etc/init.d/rcS
The problem in "python3.4 /home/inno_daemon/MServer.py"
Code:
root@miner~:
python3.4 /home/inno_daemon/MServer.py
Traceback (most recent call last):
File "/home/inno_daemon/MServer.py", line 12, in
from MParser import *
File "/home/inno_daemon/MParser.py", line 17, in
from inno_lib import *
File "/home/inno_py/inno_lib.py", line 5, in
import cgi
File "/lib/python3.4/cgi.py", line 39, in
from email.parser import FeedParser
File "/lib/python3.4/email/parser.py", line 12, in
from email.feedparser import FeedParser, BytesFeedParser
File "/lib/python3.4/email/feedparser.py", line 27, in
from email import message
File "/lib/python3.4/email/message.py", line 16, in
from email import utils
File "/lib/python3.4/email/utils.py", line 40, in
from email.charset import Charset
File "/lib/python3.4/email/charset.py", line 14, in
import email.base64mime
File "/lib/python3.4/email/base64mime.py", line 37, in
from base64 import b64encode
File "", line 2237, in _find_and_load
File "", line 2226, in _find_and_load_unlocked
File "", line 1200, in _load_unlocked
File "", line 1129, in _exec
File "", line 1467, in exec_module
File "", line 1570, in get_code
File "", line 656, in _compile_bytecode
ValueError: bad marshal data (unknown type code)
Does anyone have any ideas?python3.4 /home/inno_daemon/MServer.py
Traceback (most recent call last):
File "/home/inno_daemon/MServer.py", line 12, in
from MParser import *
File "/home/inno_daemon/MParser.py", line 17, in
from inno_lib import *
File "/home/inno_py/inno_lib.py", line 5, in
import cgi
File "/lib/python3.4/cgi.py", line 39, in
from email.parser import FeedParser
File "/lib/python3.4/email/parser.py", line 12, in
from email.feedparser import FeedParser, BytesFeedParser
File "/lib/python3.4/email/feedparser.py", line 27, in
from email import message
File "/lib/python3.4/email/message.py", line 16, in
from email import utils
File "/lib/python3.4/email/utils.py", line 40, in
from email.charset import Charset
File "/lib/python3.4/email/charset.py", line 14, in
import email.base64mime
File "/lib/python3.4/email/base64mime.py", line 37, in
from base64 import b64encode
File "
File "
File "
File "
File "
File "
File "
ValueError: bad marshal data (unknown type code)
Code:
mount / -o rw,remount
find -type f -name "*.pyc" –delete
find -type f -name "*.pyo" -delete
reboot
find -type f -name "*.pyc" –delete
find -type f -name "*.pyo" -delete
reboot
Interesting.
I complained a lot about having no way to flash a TF card. Today breaking down the boxes I received last month there was ONE tiny tf card reader in the bottom of one of the boxes
Flat little bubble package the size of a matchbook was included in my order. I guess if I have a catastrophic failure maybe I can fix it.
It was 2 seconds away from being thrown out.
I'm guessing some of you others received one, but never mentioned it
I complained a lot about having no way to flash a TF card. Today breaking down the boxes I received last month there was ONE tiny tf card reader in the bottom of one of the boxes
Flat little bubble package the size of a matchbook was included in my order. I guess if I have a catastrophic failure maybe I can fix it.
It was 2 seconds away from being thrown out.
I'm guessing some of you others received one, but never mentioned it
At updating, by the way there was a new update_180129.bin. Who updated, what's new?
same root pw?
I have not updated to 180129.bin), I still have update_180112.bin, so far satisfied
At updating, by the way there was a new update_180129.bin. Who updated, what's new?
same root pw?
my settings 1044 mh/z 27 VID = 640 mh/s litecoinpool.org
Settings 1152 and 14 VID =300 mh/s litecoinpool.org WTF?
Settings 1152 and 14 VID =300 mh/s litecoinpool.org WTF?
how often or when do you restart your miner?
And I'm interested in this
1- higher hashpower adjustments in conf. 1044 / 1100 / 1152)
2. autmotated fans (between 50% and 70%)
3. Autovid search
4. seaperate safefing buttons for each section in config
5.. ?
1: same here.. running 3x A4+ and it seems that the miners are restarting without any reason.. and the most important thing is that the miners are sometimes switching to innosilicon pool ..patched yesterday the new firmare "update_180129" and i did some test during the day. first of all the config doesn't recognize the configuration of the pool and start mining @ innosilicon pool .òó. (not OK!)
2: if the miners are running in overclock mode 1152 and auto VID, the reported hashrate to the pool goes down to 55-150 mhs? WTF and no matte wich pool im useing.. mining gutch , litecoinpool or other pools also .. absolutely low hashrate.
but on minerstatus the hashrate is ~ 695 mhs (tested with vardiff , d=16384, d=32xxx and higher diff above @ d=206xxx and so on.. )
3: pls HACK that crap firmware
2: if the miners are running in overclock mode 1152 and auto VID, the reported hashrate to the pool goes down to 55-150 mhs
? WTF and no matte wich pool im useing.. mining gutch , litecoinpool or other pools also .. absolutely low hashrate.but on minerstatus the hashrate is ~ 695 mhs (tested with vardiff , d=16384, d=32xxx and higher diff above @ d=206xxx and so on.. )
3: pls HACK that crap firmware
how often or when do you restart your miner?
And I'm interested in this
At updating, by the way there was a new update_180129.bin. Who updated, what's new?
how often or when do you restart your miner?
Hi,
Can anyone share original unmodified version of inno_config.py ?
I messed up mine and backup seems corrupted and unreadable somehow.
Thanks in advance
Can anyone share original unmodified version of inno_config.py ?
I messed up mine and backup seems corrupted and unreadable somehow.
Thanks in advance
Just reflash the firmware to default settings.
Hi,
Can anyone share original unmodified version of inno_config.py ?
I messed up mine and backup seems corrupted and unreadable somehow.
Thanks in advance
Can anyone share original unmodified version of inno_config.py ?
I messed up mine and backup seems corrupted and unreadable somehow.
Thanks in advance
What are the settings you use for VID and what mh/z
I'm running all miners @ 1152MHz with VID 14. This combination works perfectly. Miners report 695MHs and it's very close to "real" average hashrates too (anything between 660 to over 700MHs).
and what are the temperatures
Min Max Avg
34.67 / 64 / 49.33
These are pretty much the averages for most of my miners. I have two units however, which have higher temps (mainly the max temp shows readings of near 80C).
Also, these are located in cold storage, so ambient temperature is very low during the winter, which helps.
Thank you for the information
What are the settings you use for VID and what mh/z
I'm running all miners @ 1152MHz with VID 14. This combination works perfectly. Miners report 695MHs and it's very close to "real" average hashrates too (anything between 660 to over 700MHs).
and what are the temperatures
Min Max Avg
34.67 / 64 / 49.33
These are pretty much the averages for most of my miners. I have two units however, which have higher temps (mainly the max temp shows readings of near 80C).
Also, these are located in cold storage, so ambient temperature is very low during the winter, which helps.
What are the settings you use for VID and what mh/z
I'm running all miners @ 1152MHz with VID 14. This combination works perfectly. Miners report 695MHs and it's very close to "real" average hashrates too (anything between 660 to over 700MHs).
and what are the temperatures
What are the settings you use for VID and what mh/z
I'm running all miners @ 1152MHz with VID 14. This combination works perfectly. Miners report 695MHs and it's very close to "real" average hashrates too (anything between 660 to over 700MHs).
how to increase the fan before was 70% now is 40?
Why do you want to increase the speed?
It should increase in line with temperature based on my experience.
because 70% liked the temperature, and I'm not a noise problem
has anyone tried the firmware downgrade ? want to try the December to return, but I fear the brick to
i have tried it and it works OK
What are the settings you use for VID and what mh/z
Jump to: