KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1936.

gupik65

member

Activity: 61

Merit: 10

Quote from: kano on December 17, 2015, 01:48:39 AM

It will work with a worker name, but it will show up under your worker list as your username without a worker name.
It also can take a minute to do the switch to working properly.

I've added the details stratum+tcp://nonce.kano.is:27181 to the opening post and the pool front page just now also.

This is for all antminerS1......S7 have to register stratum+tcp://nonce.kano.is:27181 Huh

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: VirosaGITS on December 17, 2015, 01:16:06 AM

Quote from: clgrissom3 on December 17, 2015, 12:02:38 AM

Quote from: VirosaGITS on December 16, 2015, 11:46:55 PM

Quote from: wolfen on December 16, 2015, 10:51:07 PM

Quote from: wcg on December 16, 2015, 10:28:35 PM

Is the factor cg miner the best for mining on this pool do you recommend an update or somthing that will perform better
I have s7 and s5 miners ...thanks

Pretty sure Kano will handle your hardware with stock firmware.
S7's working top notch.
Pool won't slam your rigs around.

This remind me. The AsicMiner tube don't work with most pools, they will crash and trash and complain. Honestly its a pain. I found out that they work fine on GHash.io, but i did not try on here.

Would anyone know if Kano.is handle AsicMiner Tube/Prisma as well as Ghash? (Without causing them to crash)

Take a look ath this post from Kano...

https://bitcointalksearch.org/topic/m.13252062

Thank you, i dont read for a few days and boom. Funny this happened 2 days ago.

At first it did not work, when i put a Virosa.workername. It would submit share but they were not being credited to my account. Then i removed the .workername and it works.
I'll let these run and report if it works or if it still crashes.

Thanks Kano and thanks -ck for coding it in.

Workernames work, it's just that they get stripped off and everything gets credited to the username worker only. It also takes approximately 3 minutes after connecting them for them to start mining properly as the proxy does its magic to sanitise work for them.

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

It will work with a worker name, but it will show up under your worker list as your username without a worker name.
It also can take a minute to do the switch to working properly.

I've added the details stratum+tcp://nonce.kano.is:27181 to the opening post and the pool front page just now also.

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: clgrissom3 on December 17, 2015, 12:02:38 AM

Quote from: VirosaGITS on December 16, 2015, 11:46:55 PM

Quote from: wolfen on December 16, 2015, 10:51:07 PM

Quote from: wcg on December 16, 2015, 10:28:35 PM

Is the factor cg miner the best for mining on this pool do you recommend an update or somthing that will perform better
I have s7 and s5 miners ...thanks

Pretty sure Kano will handle your hardware with stock firmware.
S7's working top notch.
Pool won't slam your rigs around.

This remind me. The AsicMiner tube don't work with most pools, they will crash and trash and complain. Honestly its a pain. I found out that they work fine on GHash.io, but i did not try on here.

Would anyone know if Kano.is handle AsicMiner Tube/Prisma as well as Ghash? (Without causing them to crash)

Take a look ath this post from Kano...

https://bitcointalksearch.org/topic/m.13252062

Thank you, i dont read for a few days and boom. Funny this happened 2 days ago.

At first it did not work, when i put a Virosa.workername. It would submit share but they were not being credited to my account. Then i removed the .workername and it works.
I'll let these run and report if it works or if it still crashes.

Thanks Kano and thanks -ck for coding it in.

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: clgrissom3 on December 17, 2015, 12:02:38 AM

Quote from: VirosaGITS on December 16, 2015, 11:46:55 PM

Quote from: wolfen on December 16, 2015, 10:51:07 PM

Quote from: wcg on December 16, 2015, 10:28:35 PM

Is the factor cg miner the best for mining on this pool do you recommend an update or somthing that will perform better
I have s7 and s5 miners ...thanks

Pretty sure Kano will handle your hardware with stock firmware.
S7's working top notch.
Pool won't slam your rigs around.

This remind me. The AsicMiner tube don't work with most pools, they will crash and trash and complain. Honestly its a pain. I found out that they work fine on GHash.io, but i did not try on here.

Would anyone know if Kano.is handle AsicMiner Tube/Prisma as well as Ghash? (Without causing them to crash)

Take a look ath this post from Kano...

https://bitcointalksearch.org/topic/m.13252062

Ahh beat me too it.

Best regards

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: kano on December 15, 2015, 12:42:01 AM

Quote from: BannedDK on December 11, 2015, 06:45:05 AM

Gotta say the Best thing i did was to switch over to this pool.!

Only been here 5 days or so, and its already better Then all the other pools i tried.

Now we just Need evryone Else to do the same thing Cheesy

Edit: and if you or anyone Else find A solution to point my asictubes at this pool it would be great Grin

ck hasnt answered my post yet so got no clue if its possible some other way.

I've added a 'nonce' proxy that should work with the Asicminer tube - thanks to -ck for coding it

Could you try on: stratum+tcp://nonce.kano.is:27181
and let me know if all is OK or not?

They'll show up in your account as your username without a worker name.

Quote from: VirosaGITS on December 16, 2015, 11:46:55 PM

Quote from: wolfen on December 16, 2015, 10:51:07 PM

Quote from: wcg on December 16, 2015, 10:28:35 PM

Is the factor cg miner the best for mining on this pool do you recommend an update or somthing that will perform better
I have s7 and s5 miners ...thanks

Pretty sure Kano will handle your hardware with stock firmware.
S7's working top notch.
Pool won't slam your rigs around.

This remind me. The AsicMiner tube don't work with most pools, they will crash and trash and complain. Honestly its a pain. I found out that they work fine on GHash.io, but i did not try on here.

Would anyone know if Kano.is handle AsicMiner Tube/Prisma as well as Ghash? (Without causing them to crash)

clgrissom3

legendary

Activity: 1736

Merit: 1032

Carl, aka Sonny :)

Quote from: VirosaGITS on December 16, 2015, 11:46:55 PM

Quote from: wolfen on December 16, 2015, 10:51:07 PM

Quote from: wcg on December 16, 2015, 10:28:35 PM

Is the factor cg miner the best for mining on this pool do you recommend an update or somthing that will perform better
I have s7 and s5 miners ...thanks

Pretty sure Kano will handle your hardware with stock firmware.
S7's working top notch.
Pool won't slam your rigs around.

This remind me. The AsicMiner tube don't work with most pools, they will crash and trash and complain. Honestly its a pain. I found out that they work fine on GHash.io, but i did not try on here.

Would anyone know if Kano.is handle AsicMiner Tube/Prisma as well as Ghash? (Without causing them to crash)

Take a look ath this post from Kano...

https://bitcointalksearch.org/topic/m.13252062

dmwardjr

legendary

Activity: 1302

Merit: 1318

Technical Analyst/Trader

It's nice seeing more new miners have pointed their gear here. Thanks for pointing them here. Spread the word...

If you stick around, I believe this pool will prove itself worthy to live here. Patience is key...

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: wolfen on December 16, 2015, 10:51:07 PM

Quote from: wcg on December 16, 2015, 10:28:35 PM

Is the factor cg miner the best for mining on this pool do you recommend an update or somthing that will perform better
I have s7 and s5 miners ...thanks

Pretty sure Kano will handle your hardware with stock firmware.
S7's working top notch.
Pool won't slam your rigs around.

This remind me. The AsicMiner tube don't work with most pools, they will crash and trash and complain. Honestly its a pain. I found out that they work fine on GHash.io, but i did not try on here.

Would anyone know if Kano.is handle AsicMiner Tube/Prisma as well as Ghash? (Without causing them to crash)

wolfen

hero member

Activity: 770

Merit: 523

Quote from: wcg on December 16, 2015, 10:28:35 PM

Is the factor cg miner the best for mining on this pool do you recommend an update or somthing that will perform better
I have s7 and s5 miners ...thanks

Pretty sure Kano will handle your hardware with stock firmware.
S7's working top notch.
Pool won't slam your rigs around.

wcg

newbie

Activity: 31

Merit: 0

Is the factor cg miner the best for mining on this pool do you recommend an update or somthing that will perform better
I have s7 and s5 miners ...thanks

bctmke

sr. member

Activity: 294

Merit: 250

Saw that we had hit a block and hopped on the forums quick. Realized very quickly that it wasn't (hadn't actually looked at the pool stats yet). It is great that -ck and kano will pop on and let us know whats up. Here's to the next one!

clgrissom3

legendary

Activity: 1736

Merit: 1032

Carl, aka Sonny :)

Quote from: generalt on December 16, 2015, 09:38:42 PM

Thanks for the analysis. It's nice to have pool ops that go through the details to its miners rather than just be left in the dark like most other pools.

Agreed! It's nice to be included and to be a part of something like this. There is no communication out in the other pools...when something looks out of place or is going wrong you get nothing but crickets…chirp…chirp.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: citronick on December 16, 2015, 09:40:38 PM

in other pools, some have separate ASICs only pool to facilitate new fast miners from the non-ASICs one - would this help the above?

There's no such thing as non-asic miners for bitcoin.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: VirosaGITS on December 16, 2015, 08:29:27 PM

Quote from: -ck on December 16, 2015, 08:22:24 PM

Quote from: VirosaGITS on December 16, 2015, 08:15:37 PM

So, we just got a share that would of found us a block, but it was stale. The tooltip says "Share was submitted 1 minute too late." Does this mean the miner submitted too late to the pool late, or did we simply legit lost the propagation race?

The miner should never have been working on the stale work in the first place. The pool had informed all miners of the block change and the need to change work 69 seconds earlier. Older mining hardware/software is probably the reason - bear in mind this doesn't mean this miner is getting paid for stale work as his rejects are higher and they're not paid for.

Thank you very much for the explanation. I get it now. It is unfortunate that this may happen because a miner's software did not react properly to the job change notification.

Being one of our (new(?)) biggest miners here at Kano's C/K Pool, i hope jbravo will fix anything there is to fix, if there is something to fix and if it was simply just not a fluke.

@Kano i see your reply just now. Thank you for the in depth log. Not changing job 1 min after a job change seem like the miner would be wasting a lot of shares.

in other pools, some have separate ASICs only pool to facilitate new fast miners from the non-ASICs one - would this help the above?

generalt

legendary

Activity: 1096

Merit: 1021

Thanks for the analysis. It's nice to have pool ops that go through the details to its miners rather than just be left in the dark like most other pools.

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: not.you on December 16, 2015, 08:40:24 PM

Quote from: kano on December 15, 2015, 03:48:32 PM

Look at the Workers->Shift Graph
The light red shading is the 5Nd+ of the last reward

So now that you took the time to make that nice shading you need to add to your "to do" list to make it unshade for orphans and stale blocks Tongue

Also now that I see it, eventually it will all be shaded except for the leading edge so maybe each block should get a different color?

Yeah it doesn't actually have the marks, it calculates (guesses?) them from the shift data.
So in this case it saw a 'Block' marker and decided that's where it starts on the right.
It doesn't know if the block was actually a block or not.
That's what I meant when I said:

Quote from: kano on December 15, 2015, 07:08:27 AM

...
Yeah I'll put a label on it and also put a 'wild guestimate' of the next range on the right somehow in the not too distant future.
- maybe just use the same day range size as the last payout and mark that from the right edge back to the left
That will be wrong if the hash rate changes, but probably better than nothing.
But that will require a ckdb change to actually provide the correct last payout details - I currently find it in the shift information, if it's there, which isn't guaranteed.

ZACHM

hero member

Activity: 777

Merit: 1003