Author

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 2040. (Read 5352086 times)

legendary
Activity: 1302
Merit: 1068
Oh boy, over 200% already.......One would like to think that after a 666 block, the next dozen would be under or around 100%

the 10 before the 2x 666 block  were really good.

I started mining Sha for the first time ever on that block. When i started it was at 70% xD

Can't say i been doing good so far with my 1th.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Oh boy, over 200% already.......One would like to think that after a 666 block, the next dozen would be under or around 100%

the 10 before the 2x 666 block  were really good.
hero member
Activity: 575
Merit: 500
Oh boy, over 200% already.......One would like to think that after a 666 block, the next dozen would be under or around 100%
legendary
Activity: 1218
Merit: 1001
Thanks.  Looks like I've been connected at least 12 hours now.
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
9de49fae837435faac7b4d1b8da0cbf2e8a81f1a9df7721cc502d96650f1afdb
Still coming up with 0-confimations?
Wherever you were checking for confirmation was obviously slow.
When I posted that it was already confirmed.

It was: Block 367436 which was 2015-07-29 04:46:42 UTC
legendary
Activity: 966
Merit: 1003
9de49fae837435faac7b4d1b8da0cbf2e8a81f1a9df7721cc502d96650f1afdb
Still coming up with 0-confimations?
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
Kano,

Do you see any info on why my miners with lee group (S5) are doing failovers?  Looks like it started last week and occurs multiple times a day.  I posted in their thread, but others don't seem to be having the problem except when using this pool.  Are we missing a setting somewhere?

Thanks!
No info at my end other than yep you disconnect every so often.

Pool sets share diff to 1042 when you connect.
It can go down as low as 42 if you have a low hash rate.
If you need a fixed or high hash rate, set it on your workers in the web interface.

I'll do a pool restart now also ... though last time I did that in an attempt to sort out connection problems, it made no difference.
The problem was the farm, not the pool.
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
Payout 367296 sent 6.5hrs ago
9de49fae837435faac7b4d1b8da0cbf2e8a81f1a9df7721cc502d96650f1afdb
and finally confirmed

There's a lot of spam on the network again.
legendary
Activity: 1218
Merit: 1001
Kano,

Do you see any info on why my miners with lee group (S5) are doing failovers?  Looks like it started last week and occurs multiple times a day.  I posted in their thread, but others don't seem to be having the problem except when using this pool.  Are we missing a setting somewhere?

Thanks!
newbie
Activity: 14
Merit: 0
legendary
Activity: 1302
Merit: 1068
Payout 367131 sent
40035ec711b1e588e55d0ec8b405197d6db2fa2e8db87cfc1f15c94a8bda286f
and confirmed


You are my favorite Penguin Smiley
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
Payout 367131 sent
40035ec711b1e588e55d0ec8b405197d6db2fa2e8db87cfc1f15c94a8bda286f
and confirmed
legendary
Activity: 1736
Merit: 1006
Looks like the 2.4PH mining to an address is back on the pool.  Anyone know if this is a large renter or a small farm?

he just got a block from solo pool.

sr. member
Activity: 305
Merit: 250
Damn power-outs!!

...and Internet outages.  Mine went out around 2am and apparently my 4xSP20 rig still uses about 1000W even when not mining anything (a design flaw IMHO)!  Nothing like burning away several kWh during the night while the rig does nothing  Angry .

The Internet is still down (a tech comes out tomorrow) but I'm back mining again after rigging up a WiFi router into client mode to connect my cell phone AP into the house Ethernet to run the miners.

Oh, and yes, the flaky miner required a hair dryer restart after changing the the network settings.
legendary
Activity: 1274
Merit: 1000
Looks like the 2.4PH mining to an address is back on the pool.  Anyone know if this is a large renter or a small farm?
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
Payout 367079 sent
1352637efbd5cc11e2ee27e42532d7de4c4f7f35009ebe5f91c8495edeb8332b
and confirmed
newbie
Activity: 14
Merit: 0
I am close to even for the two fifty th I rented during the the 2x satan block. I think I need two blocks in under 125 percent.
If you started any time during the last 167% of the 666.666% block, then you will be on target of 100% (or better the later you started) for 4 blocks already.
So yeah that just depends on the next block if you hit the 100% for 5 blocks and the expected average payout.

Also, the average fee was quite good on those 4 so the PPS on them (again if you started mining during the last 167% of the 666.666% block) should be ~99.95% after removing the pool fee.
I like your 5n system.

So I keep an eye at the pool and every once in a while do a nice rental.  Must be the eighth on ninth time I have done it.  Kind of fun.
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
I am close to even for the two fifty th I rented during the the 2x satan block. I think I need two blocks in under 125 percent.
If you started any time during the last 167% of the 666.666% block, then you will be on target of 100% (or better the later you started) for 4 blocks already.
So yeah that just depends on the next block if you hit the 100% for 5 blocks and the expected average payout.

Also, the average fee was quite good on those 4 so the PPS on them (again if you started mining during the last 167% of the 666.666% block) should be ~99.95% after removing the pool fee.
newbie
Activity: 14
Merit: 0
I am close to even for the two fifty th I rented during the the 2x satan block. I think I need two blocks in under 125 percent.

full member
Activity: 143
Merit: 100
Using some expensive heaters
Jump to: