Author

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 979. (Read 5352429 times)

legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
Nice to see that mining is alive and well.

@Kano, have you considered signalling segwit in order to push it closer to activation? With SegWit activated your pool will be able to include more transactions per block which obviously translates to more fees for your miners. Right now the 1mb limit is forcing you to forfeit transactions to the next miner because you can only include 1mb per block you find atm.

You obviously have not read very much of this pools BitcoinTalk thread. Most of us here are not very big segwit fans for multiple reasons.
He's asked the same question more than once before ... I'm just ignoring him Tongue
newbie
Activity: 47
Merit: 0
LOL little hair left... lol no hair 4 me im 14 and have alopecia and lost all my hair. Sucks but its slowly growing back.
hero member
Activity: 658
Merit: 500
Visualize whirledps
also gg new block!

Let's get BLOCK #3 before the end of BLOCKFRIDAY!  Cheesy Cheesy Cheesy

Go, Speed Racer, GO!  Grin

Edit: Fairly chubby block too!  Cool  14.86217100 BTC Miner Reward!
hero member
Activity: 658
Merit: 500
Visualize whirledps
Nice to see that mining is alive and well.

@Kano, have you considered signalling segwit in order to push it closer to activation? With SegWit activated your pool will be able to include more transactions per block which obviously translates to more fees for your miners. Right now the 1mb limit is forcing you to forfeit transactions to the next miner because you can only include 1mb per block you find atm.

You obviously have not read very much of this pools BitcoinTalk thread. Most of us here are not very big segwit fans for multiple reasons.
hero member
Activity: 658
Merit: 500
Visualize whirledps
nvm its fixed rn its running at 5.3

also is there a program or a app that i can monitor my miner and restart it if needed?

wtf is a s7 supposed to run this high? https://gyazo.com/4eaf2751a0da9c1bff6cae3f0af4e547


Awesome Miner is the perfect application for doing just that. I use the professional version, but the free edition works great for just a few miners. You can find it in the Mining Software section of this web site. https://bitcointalksearch.org/topic/awesome-miner-powerful-windows-gui-to-manage-and-monitor-up-to-200000-miners-676942

OR, http://www.awesomeminer.com/default.aspx

It is very customizable and provides lots of valuable information and more tasks than I can begin to even think of. It's pretty cool too! Smiley
And, in my opinion, lives up to its name, Awesome! Wink

Good luck in getting your probs sorted out. I know how frustrating they can be!! That's why I have very little hair left! LOL
member
Activity: 87
Merit: 10
Nice to see that mining is alive and well.

@Kano, have you considered signalling segwit in order to push it closer to activation? With SegWit activated your pool will be able to include more transactions per block which obviously translates to more fees for your miners. Right now the 1mb limit is forcing you to forfeit transactions to the next miner because you can only include 1mb per block you find atm.
newbie
Activity: 47
Merit: 0
 Shocked :ocan i just increase the freq to have it constant run like that?
will it pull more watts
hero member
Activity: 1092
Merit: 552
Retired IRCX God
...wtf is a s7 supposed to run this high?...
We run ours between 5.1TH(768) and 5.5TH(800).  Cool
newbie
Activity: 47
Merit: 0
nvm its fixed rn its running at 5.3

also is there a program or a app that i can monitor my miner and restart it if needed?

wtf is a s7 supposed to run this high? https://gyazo.com/4eaf2751a0da9c1bff6cae3f0af4e547

hero member
Activity: 1610
Merit: 538
I'm in BTC XTC
rebooted and changed power plugs. it runs at 4.7-5.0 th/s for like 5 mins than starts to drop opp slowly like .30 th/s till its at 3.5? whats going on

im going to try hooking up a different power supply in its place

also gg new block!
I kept my S7 slightly underclocked all the time I ran it, and it seemed to run fine that way.  Have you tried a dropping the frequency a bit and see if that helps?

EDIT - Drop it like 10-20% and if it stays stable then you can start inching it back up until you see trouble.  Good luck!
newbie
Activity: 47
Merit: 0
rebooted and changed power plugs. it runs at 4.7-5.0 th/s for like 5 mins than starts to drop opp slowly like .30 th/s till its at 3.5? whats going on

im going to try hooking up a different power supply in its place

also gg new block!
full member
Activity: 341
Merit: 100
Yea i hooked up 1 psu to two boards and the other to 1 board and the 1 connector up front. Ill try switching the power supplies and connecting them to different boards.

Look in your config page for the miner and see if the card thats not hashing to see if its even the same card that's hooked to the one power supply.  Chances are esp if its a 1000w power supply and if the same one running the main board should mean its still putting out 12 volts if its powering the mainboard still. So still a high chance its not a dead power supply and a restart might just be all thats needed.  If not then try swapping the power plugs from the one hash board to another.  and also when you got the plugs off look for any signs of discoloration in the spots the plugs plug into on the board for signs of burning from high resistance esp if your plugs happen to be the kind with only 2 wires going to each plug.  Sometimes them female pins on them pci-e connectors can corrode or can sometimes just lose and not making good contact and can cause you to lose power in the plug or can build up resistance and start burning the plugs or melting the wires.    and on other spot to look at if haveing a power problem and you can verify the power supply is putting out the right voltage is to also check all the wires connections that go to the power supply esp if you also happen to have one of them ones with the breakout boards on it. 






newbie
Activity: 47
Merit: 0
Yea i hooked up 1 psu to two boards and the other to 1 board and the 1 connector up front. Ill try switching the power supplies and conecting them to differernt boards.
hero member
Activity: 658
Merit: 500
Visualize whirledps
yep i use two 1000w psu. any way to fix this?

I do have a corsair ax1500i titanium psu on the way but i also have another s7 to0.
ill have to stick with these 2 1000w power supplies

Sorry for the OT
Two 1,000 watt PSU's should be plenty for an S7. I'm assuming you have two boards (6 connectors) being powered by one PSU and the other PSU powering one board (3 connectors) and the controller? Don't mix power supplies on a single board. That could kill it.

EDIT: One of your PSU's might also be providing less power than specified.
newbie
Activity: 47
Merit: 0
yep i use two 1000w psu. any way to fix this?

I do have a corsair ax1500i titanium psu on the way but i also have another s7 to0.
ill have to stick with these 2 1000w power supplies
full member
Activity: 143
Merit: 100
yesterday they were all lit up and working fine. once i get out of school ill head over and check out whats wrong. could be power?

may be, if u use 2 PSU to power the S7

or one board is dead Cry
newbie
Activity: 47
Merit: 0
yesterday they were all lit up and working fine. once i get out of school ill head over and check out whats wrong. could be power?
full member
Activity: 143
Merit: 100
yea there was a storm last night and my internet connection isnt the best. ill restart my miner and router.
It's clearly the miner, not a temporary outage or anything like that.

The page to look at is not the graph, but the Workers->Shifts page.
That shows your average hash rate for each shift, which is in no way affected by the shifts before or after it.

Your hash rate was low for your first shift coz you started in the middle of the shift.
The next 9 full shifts you were 4.7 to 4.9THs

Then it dropped to 3.33 and has stayed between 3.1 and 3.5 for the rest (12 shifts so far) - i.e. something went wrong with it (as I said) during shift "8axpj mutsumi"
That's what the numbers mean - the shift also tells you when it started (UTC) and how long it was, so you can tell when it happened.

Should i try updating the firmware and rebooting the miner?


4.7ths, is that a S7?  1 of the mining board is not working, when its hash, the mining board red color LED should lit up
newbie
Activity: 47
Merit: 0
Could you also explain what 5nd is. I've read about it under the payment section and saw that it will take 2 days and 11 hours to reach it. Many people told me that your first payments will be low but after you reach 5nd they will be better. Is this true? Rn my payout from the last block is .000267.

Ill reboot the miner and make sure it has the lastest firmware. thanks
full member
Activity: 143
Merit: 100
Hi Kano,

I am going to set up some hash rates in Malaysia. Should I connect to your Singapore node, if I recall correctly, for better connectivity?

Am mining here @kano.is with tiny hash rate for the past 375 days, connected to SG node and use the main stratum.kano.is as 2nd pool setting as mentioned by Carl  Tongue

i recorded ONLY 8 times fail over to other pool Roll Eyes   Roll Eyes
Jump to: