▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 108.

ZeroGee

member

Activity: 92

Merit: 10

I forgot to mention it stated that the connection was refused during these events. Following is a screenshot on one of the machines. The other has 4 1070s. This one has one. Both machines are on the same network and they occur at different times.

I could believe that they don't clean up well.

Though, nemosminer has not really selected another algorithm the entire time I've been keeping an eye on it.

This has given me an idea though. I'll report back with my findings/speculation.

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: ZeroGee on December 12, 2017, 09:52:19 PM

I've been getting pretty regular disconnects from zpool every 10 minutes, and reconnects about 30 seconds later. I'm pretty sure it's affecting my hashrate. Nothing's changed on the rigs and they're not having any issues. I've been watching the screen in person to time it and make sure. Using nemosminer v2.2.2. I've been running a continuous google ping script and logging when it doesn't have a connection, and I haven't had a single report of a lost connection yet.

I should be getting roughly 5.5MH/s on neoscrypt, and I have been until earlier today. Thoughts?

Run the neoscript miner alone on its own solid without a profit switching script like nemosminer/etc.

See if it stays connected.

Second; try a second version of the miner app that is not the same as the one you are using now.

I have historically had issues with profit switching and neoscrypt, and neoscrypt in general.... the apps don't clean up properly; lock the card into a lower power state, etc.... so this is a good place to start.

ZeroGee

member

Activity: 92

Merit: 10

I've been getting pretty regular disconnects from zpool every 10 minutes, and reconnects about 30 seconds later. I'm pretty sure it's affecting my hashrate. Nothing's changed on the rigs and they're not having any issues. I've been watching the screen in person to time it and make sure. Using nemosminer v2.2.2. I've been running a continuous google ping script and logging when it doesn't have a connection, and I haven't had a single report of a lost connection yet.

I should be getting roughly 5.5MH/s on neoscrypt, and I have been until earlier today. Thoughts?

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: MaxiMan on December 12, 2017, 02:45:57 PM

Yea, my bad i left lbry there...
However.. a read too about normalizations.. how do i calculate them?
I saw normalizations for 1070 but would be about the same for 980ti?

typically, 9 series cards are all within ~5% of each other scaled upwards.... so, if you are running 10xx series cards, you can use the 1070 norm. But, remember, new miner apps come out all the time, so sometimes one algo gets a huge jump later compared to my normalizations from quite some time ago =)

follow the batch link in my sig.

look for the comments on the lite batch file or my old post in the older locked thread; my link to my normalization how-to is there.

nmmobile

newbie

Activity: 8

Merit: 0

HI Dev

I wait payout Over 2 Month ..help me.. Cry

ZEC coin

wallet : t1JNkxQYE4Pd4jCuFj97FjnjSh3mKvbyyey 0.03619415 ZEC

Help me...

jpouza

legendary

Activity: 2716

Merit: 1116

Quote from: Sityl on December 12, 2017, 03:57:26 PM

I have a question. Take the following example:

Amount Percent mBTC Time
0.049827 MONA 0.199% 0.03692776 13m ago

Does this mean I've earned 0.03692776 mBTC, or 0.199% of 0.03692776 mBTC?

Cheers!)

This percent represents your proporcional share (due to your hashrate power) of the block found by all the pool miners for that specific coin/algo.

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: Sityl on December 12, 2017, 03:57:26 PM

I have a question. Take the following example:

Amount Percent mBTC Time
0.049827 MONA 0.199% 0.03692776 13m ago

Does this mean I've earned 0.03692776 mBTC, or 0.199% of 0.03692776 mBTC?

Cheers!)

0.03692776

0.199% is your take of the block

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: jpouza on December 12, 2017, 03:55:29 PM

Quote from: crackfoo on December 12, 2017, 10:53:48 AM

Quote from: garandhero on December 12, 2017, 10:10:14 AM

I know this is likely a dumb question, but what are the odds of lowering the fee's as like a "holiday" special from the 2% to 1.5% or 1.25% or dare I say it, 1%

fee's updated on some algo.

Just reporting that your pool is 100%, everything looks fine, thanks for the good job.

No balance drops, no problems at website, no discrepance into hashrate reported, nice, keep up with the good job.

Cheers

good to hear. Still work to be done but glad to see it's getting back to normal with the extra 15k miners

Sityl

newbie

Activity: 43

Merit: 0

I have a question. Take the following example:

Amount Percent mBTC Time
0.049827 MONA 0.199% 0.03692776 13m ago

Does this mean I've earned 0.03692776 mBTC, or 0.199% of 0.03692776 mBTC?

Cheers!)

jpouza

legendary

Activity: 2716

Merit: 1116

Quote from: crackfoo on December 12, 2017, 10:53:48 AM

Quote from: garandhero on December 12, 2017, 10:10:14 AM

I know this is likely a dumb question, but what are the odds of lowering the fee's as like a "holiday" special from the 2% to 1.5% or 1.25% or dare I say it, 1%

fee's updated on some algo.

Just reporting that your pool is 100%, everything looks fine, thanks for the good job.

No balance drops, no problems at website, no discrepance into hashrate reported, nice, keep up with the good job.

Cheers

MaxiMan

newbie

Activity: 85

Merit: 0

Yea, my bad i left lbry there...
However.. a read too about normalizations.. how do i calculate them?
I saw normalizations for 1070 but would be about the same for 980ti?

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: garandhero on December 12, 2017, 01:27:31 PM

Lots of rejected shares on scrypt. Disabled for now.

(nvidia cards)

the scrypt port? GPU's are like a serious fraction of a asic....... seems like a waste.

Quote from: MaxiMan on December 12, 2017, 01:44:58 PM

How to set up properly Multi Algo Switching on CCminer?
This is what it put on Batch following example of Zpool

Code:

:start
ccminer-x64 -a neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash
ccminer-x64 -a lyra2v2 -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash
ccminer-x64 -a equihash -o stratum+tcp://equihash.mine.zpool.ca:2142 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash

sleep 5000
goto start

For my GTX980ti looks this best algos for me

you must make sure your ccminer supports each algo you are using it with... but the errors in your batch are as follows:
password on all should be "c=BTC,neoscrypt,lyra2v2,equihash"; LBRY is not an algo in your batch. You also need to follow my instructions below to find out how to "normalize" the miner batch to your individual machine so that it's profitability calculations are correct... so each algo will contain a number after as such:
"c=BTC,neoscrypt=0.9,lyra2v2=65.0,equihash=0.95"
But these numbers I put are just examples. You will know how to set it up with my instructional batch link post mentioned below.

check the batch link in my sig. Lots of examples, and if you look for the link in that post to my "lite batch", you will find an example exactly like what you are trying to do.

My scripts simplify it though, and the most recent automatic miner has lots of notes on it for easy modification by a new user... and they make it easy to add an algo that is missing that you wish to mine.

MaxiMan

newbie

Activity: 85

Merit: 0

How to set up properly Multi Algo Switching on CCminer?
This is what it put on Batch following example of Zpool

Code:

:start
ccminer-x64 -a neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash
ccminer-x64 -a lyra2v2 -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash
ccminer-x64 -a equihash -o stratum+tcp://equihash.mine.zpool.ca:2142 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash

sleep 5000
goto start

For my GTX980ti looks this best algos for me

garandhero

newbie

Activity: 22

Merit: 0

Lots of rejected shares on scrypt. Disabled for now.

(nvidia cards)

jcorbijn

newbie

Activity: 5

Merit: 0

just started the pool up again and it looks like it checks out.

Thank you crackfoo for the quick reaction!

just.dont

newbie

Activity: 9

Merit: 0

Quote from: crackfoo on December 12, 2017, 09:51:50 AM

Did some changes to NIST5 algo this morning and looks like hashrates are holding. Will be keeping an eye on it. There only so much I can do when there are a zillion "Awesome Miner" users drowning my inboxes.

Thanks. My hashrate reported by website now at least roughly matches "raw" miner hashrate. Will be looking at it for some hours, but so far math generally checks out.

uhro

full member

Activity: 209

Merit: 100

Join Cashbery Coin!

Any idea when the pool will become stable again?
I've moved my miners elsewhere so I can receive proper earnings for now, kept one on zpool just so I can keep an eye on stability for myself.

I'm experiencing what most are posting here, hashrates consistently reported much lower on the website and lower earnings.
I like your pool and will move most of my rigs back once it's sorted out.
Is there an eta?

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: garandhero on December 12, 2017, 10:10:14 AM

I know this is likely a dumb question, but what are the odds of lowering the fee's as like a "holiday" special from the 2% to 1.5% or 1.25% or dare I say it, 1%

fee's updated on some algo.

guytechie

hero member

Activity: 677

Merit: 500

Speaking of CPU mining, has anyone asked about adding other CPU mining algos and coins here? I hear Aeon and Monero are CPU friendly. There may be others I don’t know about.

Sityl

newbie

Activity: 43

Merit: 0

Quote from: garandhero on December 12, 2017, 10:10:14 AM

I know this is likely a dumb question, but what are the odds of lowering the fee's as like a "holiday" special from the 2% to 1.5% or 1.25% or dare I say it, 1%

I'd say about the % chance as you're requesting (disclaimer, I have no actual idea)

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 108. (Read 279601 times)