Pages:
Author

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 60. (Read 279744 times)

jr. member
Activity: 224
Merit: 2
Looks like same thing here, locally connected, shares accepted no disconnects. Nothing on wallet page in terms of latest earnings or active miners.

Zpool lags pretty bad from time to time and doesn't show your coins in the wallet but it eventually catches up and everything is in there.
newbie
Activity: 20
Merit: 0
So my miners were working fine, and now all of a sudden they are not showing their hashrates on zpool - however we are seeing they are active locally (I.e. ccminer). Can you look in to this please @crackfoo? Thanks! http://zpool.ca/?address=38L1mGih6dwow4orfPdJP4RKnhfJUGqHVX
Same issue with my miners!
newbie
Activity: 64
Merit: 0
So my miners were working fine, and now all of a sudden they are not showing their hashrates on zpool - however we are seeing they are active locally (I.e. ccminer). Can you look in to this please @crackfoo? Thanks! http://zpool.ca/?address=38L1mGih6dwow4orfPdJP4RKnhfJUGqHVX
newbie
Activity: 51
Merit: 0
legendary
Activity: 3570
Merit: 1126
I'm away travelling BTC payouts will resume Friday night. They require manual approval which I can't access at the moment do to my own misconfiguration.

newbie
Activity: 51
Merit: 0
Hi crackfoo,
I`m missing last payout on BTC adress 1DJ2XeBb2GuSB8FyTbCPdW4hPBWUj7Cb28
newbie
Activity: 11
Merit: 0
newbie
Activity: 20
Merit: 0
I have several BTC wallet address in zpool due to some changes previous. No matter how I try to make each of them meet the minimum payment amount, I fail. There are still some small amount of BTC left over. Can you advice how can I empty the balance or move them to a single BTC wallet so that I can accumulate them to reach the minimum payout? Thanks.

The amount left over has to do with long-maturity coins....  if they take a long time to confirm, the same goes for selling on the exchange because it happens a lot later than the other coins get sold.

I am mining using D3 and S9 only. In conclusion, how can I take out these small amounts in these several BTC wallet? Thanks.
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
I have several BTC wallet address in zpool due to some changes previous. No matter how I try to make each of them meet the minimum payment amount, I fail. There are still some small amount of BTC left over. Can you advice how can I empty the balance or move them to a single BTC wallet so that I can accumulate them to reach the minimum payout? Thanks.

The amount left over has to do with long-maturity coins....  if they take a long time to confirm, the same goes for selling on the exchange because it happens a lot later than the other coins get sold.
newbie
Activity: 20
Merit: 0
I have several BTC wallet address in zpool due to some changes previous. No matter how I try to make each of them meet the minimum payment amount, I fail. There are still some small amount of BTC left over. Can you advice how can I empty the balance or move them to a single BTC wallet so that I can accumulate them to reach the minimum payout? Thanks.
legendary
Activity: 3570
Merit: 1126
Hi, Crackfoo. Zpool is pplns, isnt it? So what is the N-number of commited shares, after which one share reward stops growing?

its proportional so no.
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Quick question... How do I define workers with zpool? What do I add in my bat?
example password:

RigWorkerName,c=BTC,scrypt


Cheers!

Thank you so much. Say I wanted to mine Crowd on Neoscrypt only - can I get paid IN crowd coin or do I have the option of converting that to Bitcoin as well? I'm just asking because Crowd seems to be at the top of whattomine.com - just wondering what the best way is. Thank you

The only thing you can pick is:
1) what algo to mine
2) what coin to be paid in.


The rest, like what coin to mine; is automated and controlled by the stratum services.
newbie
Activity: 9
Merit: 0
Hi, Crackfoo. Zpool is pplns, isnt it? So what is the N-number of commited shares, after which one share reward stops growing?
member
Activity: 91
Merit: 25
Today midnight everybody can grab free BTCH. We will got next Bitcoin fork: HUSH / BTC -> Bitcoin HUSH. Everybody who will have HUSH in a wallet (with a private key export option available) can grab free BTCH today.
More info at official BTCH website: http://btchush.org/

You can buy HUSH at Cryptopia, don't forget to transfer HUSH from Cryptopia into your own wallet before midnight!
Quote
A block height closest to (but not later than) 12pm NOON UTC on Feb 1st 2018
You can download the wallet here, at the bottom of the website: https://myhush.org/
newbie
Activity: 13
Merit: 0
Quick question... How do I define workers with zpool? What do I add in my bat?
example password:

RigWorkerName,c=BTC,scrypt


Cheers!

Thank you so much. Say I wanted to mine Crowd on Neoscrypt only - can I get paid IN crowd coin or do I have the option of converting that to Bitcoin as well? I'm just asking because Crowd seems to be at the top of whattomine.com - just wondering what the best way is. Thank you
hero member
Activity: 677
Merit: 500
Well i finally figured out how what others were saying about payout worked.

Then i thought about how Zpool was out of coins and then the payout scheme didnt make sense until i actually calculated a buy sell on Bittrexx and noticed the amounts to be the same.

So here is What Zpool is PROBABLY doing.

You mine 1 coin of A and get paid in .8 coin of B,
the coins are similar but with fees and all that you get less. The fees seem to not add up though.

So what i did was actually sold coin A and bought coin B with btc....
And guess what??? the coin bought was practically the same amount.

So Zpool has both coins and when you get paid in a coin they hold. They are CHARGING you the fees for if they sold what you mined and bought the coin you want payment in..

Which they are not doing as is clear by them being out of coins. So basically they are keeping the buy sell fees for themselves on top of the 2% they clear. Oh and i guess on top of the Dev Fee they now put in their
miner.

LOL

Greed is what gets you caught.

When getting paid in an alt coin, whatever you mine gets converted to BTC, then it gets converted from BTC to whatever you want to get paid out to.

I thought everyone already knew that if you get paid in any other coin than BTC, you're taking a loss because it's being double-exchanged.  That's why it's best to get paid out in BTC.  You only go through one exchange, so one less fee to pay.

If you want to mine a particular coin and hodl that coin, Yiimp-based pools such as zpool, ahashpool, zergpool, and hashrefinery are not for you.
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Quick question... How do I define workers with zpool? What do I add in my bat?
example password:

RigWorkerName,c=BTC,scrypt


Cheers!
newbie
Activity: 13
Merit: 0
Quick question... How do I define workers with zpool? What do I add in my bat?
newbie
Activity: 9
Merit: 0
Anybody has leveraged the API to get data from ZPOOL in a Google Sheet?

I tried but got lost in the proceed.   Huh I believe though that should I have something to start with I could achieve what I want.

Thanks for your support...


I was able to get LibreOffice Calc to make an external data link to the WhatToMine.com website. It gives me real-time info without all the stupid flashing pop-ups and extra crap no one wants to see. It's rough going, since I'm not a VB programmer. I had to write some macros to fire when the sheet opens, closes, and updates the highest-paying coin.



So this is working in Excel then?  Can I have a look at it?  Maybe I can leverage this for me and the community.


Not excel, LibreOffice Calc. I can send you a copy of the sheet if you tell me where to send it. It's pretty simple. It should work OK in excel, though. I opened Calc, added a sheet or two, and went to the last sheet, top menu  sheet > link to external data, and give it Whattomine's ASIC url:
(https://whattomine.com/asic?utf8=%E2%9C%93&factor%5Bsha256_hr%5D=14000.0&factor%5Bsha256_p%5D=1370.0&scryptf=true&factor%5Bscrypt_hash_rate%5D=500.0&factor%5Bscrypt_power%5D=800.0&factor%5Bx11_hr%5D=15000.0&factor%5Bx11_p%5D=1200.0&factor%5Bqk_hr%5D=450.0&factor%5Bqk_p%5D=75.0&factor%5Bqb_hr%5D=450.0&factor%5Bqb_p%5D=84.0&factor%5Bcost%5D=0.1&sort=Profitability24&volume=0&revenue=24h&factor%5Bexchanges%5D%5B%5D=&factor%5Bexchanges%5D%5B%5D=abucoins&factor%5Bexchanges%5D%5B%5D=bitfinex&factor%5Bexchanges%5D%5B%5D=bittrex&factor%5Bexchanges%5D%5B%5D=bleutrade&factor%5Bexchanges%5D%5B%5D=cryptopia&factor%5Bexchanges%5D%5B%5D=hitbtc&factor%5Bexchanges%5D%5B%5D=poloniex&factor%5Bexchanges%5D%5B%5D=yobit&dataset=&commit=Calculate)

then select html_1 for the ASIC table. If you're interested in SHA, or other algorithm, you can go to that page, and use that url instead. There are 3 different types of tables. if you select 'all', it'll bog-down your app when it refreshes from updating so many fields. It works pretty well so far. I've checked it against WhatToMine for several days and it works. It's easy to get the sheet corrupted though, and not update the fields. I use LO Calc to keep track of the pools, addresses, and coins, receive addresses, the profits, etc.  It's pretty handy if you don't have Awesome Miner. I'd like to use it to profit-switch. You can capture the current top coin name, pull the url from a table and pass it all to SSH I guess -- I'm giving it a try anyway. It'd have to be easier than doing all that coding, plus, you have the added functionality of tracking the pools, etc. 

So, I guess I'm screwed on those Linx Coins from zpool? The txid's
about 3am, CST 1-24-18
http://zpool.ca/explorer/LINX?txid=bf2455649aeaec5a6c5371a1e0e1d6e1d2d63463627efe55da4bd5862f372c0f
about 11pm, CST 1-23-18
http://zpool.ca/explorer/LINX?txid=816092d16724e26e87ebb4afb86cb0973b3a6be343d11ac50435cf6d083f54f2
about 8pm CST, 1-23-18
http://zpool.ca/explorer/LINX?txid=a4923f735eae04785fa02c8eb26fd3f8a7856f284362c07e3d1e32504f93b292
about 4pm CST, 1-23-18
http://zpool.ca/explorer/LINX?txid=536b009638d636efdf5b8a6fe4bed1fd495c5f2e2df94d02c11146185dcf7c1f

don't show up in https://chainz.cryptoid.info/linx/.  So, is this a common occurrence in mining pools? Can I get those coins back somehow?

newbie
Activity: 52
Merit: 0
Quote

it is obvious that your retries are exactly 10 seconds apart, make them 15-20 and it will work fine most of the time.

It is obvious the retry is 11 seconds.  But I did that to prove my point.  the API response is meh.  Even though my polls are every 60 seconds, it's still error prone.
Pages:
Jump to: