zpool's API has some kind of limitation on it. If you poll it too quickly it returns nothing. Thus, appearing down.
If my miner has just polled the API, and then I restart it, 9 times out of 10 the API return is blank. Yes, it's very annoying.
Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 62. (Read 279601 times)
January 26, 2018, 07:23:05 AM
January 26, 2018, 12:09:26 AM
are they high density or low density miners? sounds like a stratum proxy on your end may be beneficial for both parties. I have a feeling this may be some fallout from the people with a million low diff miners that flooded from the nicecrash.
They are all Baikal x10 miners, and I have set difficulty to 24 for each miner, so it shouldn't be low difficulty spamming shares.
@crackfoo
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
I'm really not sure why it would have any problems. There are no limits on stratum, unless I explicitly ban your wallet address, then all your miners get blocked on the firewall. I've have weirdness on my baikals as well, not seeing some of the algo's ports as alive... but, I can telnet to them just fine from the actual miner so I'm really miffed why this happens. I've not setup any automatic limiting that would interfere like this...
Yea, that's why I'm clueless too with the random connections. Just stuck on what else to do because hashrefinery.com and miningpoolhub don't have these issues with my Baikals. If I set all 10 miners to hashrefinery.com, they all connect, same with miningpoolhub. But when I set all 10 to zpool as primary pool, not all 10 connect and some fallback to backup pools, and it's always not the same miner's that are falling back to backup pools too.
For example, if I power down all 10 miners, and power them all back up, sometimes different miners can connect to zpool and some doesn't. So it's truely is random with them.
Would love to support zpool and set as a main pool. But it's hard to keep track of my miners when some are failing to connect and going to my backup pools.
January 25, 2018, 10:01:48 PM
I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.
Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
I have exactly the same problem. It is all shown as BCH despite the correct -p c=BTC ending in by bat file. Here is my BTC address in case someone can fix this: 1MvPAKp3HgotDnZhQYv99gWoTCVxBdFmpzPlease somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
fixed and fixed.
I have exactly the same problem. It is all shown as BCH , when i use c=BTC.. my wallet 1DWbwAYiXjyDhQE7YoM4uTgZSeB7uK6G6b and 1NM2B5yPr4q3JqyrRp5Hs8xbtGGM8BWmQG , can anyone help? thank you
January 25, 2018, 08:17:20 PM
@crackfoo
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
I'm really not sure why it would have any problems. There are no limits on stratum, unless I explicitly ban your wallet address, then all your miners get blocked on the firewall. I've have weirdness on my baikals as well, not seeing some of the algo's ports as alive... but, I can telnet to them just fine from the actual miner so I'm really miffed why this happens. I've not setup any automatic limiting that would interfere like this...
January 25, 2018, 07:54:08 PM
Is 'renting' coming back any time soon? Really miss the more exotic algo's on miningrigrentals / nicehash.
Cheers
Cheers
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
January 25, 2018, 07:16:38 PM
Hi all, it's from today i'm working on this wallet ( iSEYT4b5LZiRjCiJgAEoQsbZDQ6gRdxsME) trying YesScript & 7n7 algo.
I have hase/rate & many exchange
>image removed<
But no one profit on my balance.
Can anyone explain me witch problem can i have pls?
since yesterday all works good.
Thankyou
I have hase/rate & many exchange
>image removed<
But no one profit on my balance.
Can anyone explain me witch problem can i have pls?
since yesterday all works good.
Thankyou
I see erratic miner connections; very few shares.
http://zpool.ca/?address=iSEYT4b5LZiRjCiJgAEoQsbZDQ6gRdxsME
right now shows a due balance of: 0.01334860 INN
So when it hits the required threshold and matches up with the payout schedule, you should get your payment.
You need to be patient; lots of different coins take time to mature, then be sent to the exchange, then find a buyer, etc. Things take time =)
@crackfoo
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
are they high density or low density miners? sounds like a stratum proxy on your end may be beneficial for both parties. I have a feeling this may be some fallout from the people with a million low diff miners that flooded from the nicecrash.
January 25, 2018, 07:13:22 PM
@crackfoo
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
If I have 10 of the same miners with all the same settings, how come sometimes not all of them can connect to your pool? Sometimes 8 can connect, sometimes 6, sometimes 9, and etc. But I don't see a stable 10 miners connected to your pool constantly and for the ones that don't connect, it goes to my back up pools? Does it have to do with too many connections coming from my IP address? Or some kind of spam protection you have?
It's not the miners issue, because if I set hashrefinery.com as my main pool, all 10 miners connect to the pool successfully and constantly. Same success happens with miningpoolhub. It just seems like an issue with zpool. I would like to set you as a primary pool but the random miners not connecting at all is bothering me.
Any help would be appreciated.
January 25, 2018, 06:08:02 PM
I apologize for not posing in the right place (I couldn't find it). I'm total newbie. Where do I report zpool coins not making it to my wallet? For the last 2 days no coins have been arriving. On the wallet page, it shows the txid's, and none appear in https://chainz.cryptoid.info/linx/ (that's what Coinomi Support says). Below are the txid's. I can send screen shots if needed. I'd really appreciate knowing what's wrong with zpool and where all my coins went. They had to go somewhere. Please let me know how to proceed. Thanks.
about 3am, CST 1-24-18
http://zpool.ca/explorer/LINX?txid=bf2455649aeaec5a6c5371a1e0e1d6e1d2d63463627efe55da4bd5862f372c0f
about 11pm, CST 1-23-18
http://zpool.ca/explorer/LINX?txid=816092d16724e26e87ebb4afb86cb0973b3a6be343d11ac50435cf6d083f54f2
about 8pm CST, 1-23-18
http://zpool.ca/explorer/LINX?txid=a4923f735eae04785fa02c8eb26fd3f8a7856f284362c07e3d1e32504f93b292
about 4pm CST, 1-23-18
http://zpool.ca/explorer/LINX?txid=536b009638d636efdf5b8a6fe4bed1fd495c5f2e2df94d02c11146185dcf7c1f
about 3am, CST 1-24-18
http://zpool.ca/explorer/LINX?txid=bf2455649aeaec5a6c5371a1e0e1d6e1d2d63463627efe55da4bd5862f372c0f
about 11pm, CST 1-23-18
http://zpool.ca/explorer/LINX?txid=816092d16724e26e87ebb4afb86cb0973b3a6be343d11ac50435cf6d083f54f2
about 8pm CST, 1-23-18
http://zpool.ca/explorer/LINX?txid=a4923f735eae04785fa02c8eb26fd3f8a7856f284362c07e3d1e32504f93b292
about 4pm CST, 1-23-18
http://zpool.ca/explorer/LINX?txid=536b009638d636efdf5b8a6fe4bed1fd495c5f2e2df94d02c11146185dcf7c1f
sounds like LINX probably forked. I'll check into it later, but I'd stop mining using LINX address for now.
yup, looks like the dev updated the wallet. It's updated now. payouts should resume when it's synced.
I checked again today and those 28+ coins have never reached my Coinomi wallet.
January 25, 2018, 05:37:02 PM
Hi, I am mining HSR right now with ccminer, but on the wallet page I see that I am getting paid with HBC (HomeBlock Coin) that is totally unusable and I don't even got such wallet, why is this happening?
January 25, 2018, 11:58:36 AM
I have an issue and hoping someone can help. I haven't been getting any new deposits from zPool in the past two days. Last transaction was 1/23/18 around 22:00. I'm mining lyra2v2 and i'm using verge QT wallet. I've also updated the blockchain but still no luck. On zPool, it says it's paid out but it's not in my wallet. What gives? Any help would be appreciated.
Thank you in advance!
Thank you in advance!
check their blockexplorer for the transaction ID the pool gave you.
https://verge-blockchain.info/
January 25, 2018, 11:33:56 AM
I have an issue and hoping someone can help. I haven't been getting any new deposits from zPool in the past two days. Last transaction was 1/23/18 around 22:00. I'm mining lyra2v2 and i'm using verge QT wallet. I've also updated the blockchain but still no luck. On zPool, it says it's paid out but it's not in my wallet. What gives? Any help would be appreciated.
Thank you in advance!
Thank you in advance!
January 25, 2018, 11:18:15 AM
Anybody has leveraged the API to get data from ZPOOL in a Google Sheet?
I tried but got lost in the proceed.
I believe though that should I have something to start with I could achieve what I want.
Thanks for your support...
I tried but got lost in the proceed.
I believe though that should I have something to start with I could achieve what I want.Thanks for your support...
I was able to get LibreOffice Calc to make an external data link to the WhatToMine.com website. It gives me real-time info without all the stupid flashing pop-ups and extra crap no one wants to see. It's rough going, since I'm not a VB programmer. I had to write some macros to fire when the sheet opens, closes, and updates the highest-paying coin.
So this is working in Excel then? Can I have a look at it? Maybe I can leverage this for me and the community.
January 25, 2018, 09:45:09 AM
is ltc payment safe? And whats the payment threshold for ltc?
yes, same as the rest. it described on the main page.
January 25, 2018, 09:15:38 AM
is ltc payment safe? And whats the payment threshold for ltc?
January 25, 2018, 09:12:01 AM
I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.
Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
I have exactly the same problem. It is all shown as BCH despite the correct -p c=BTC ending in by bat file. Here is my BTC address in case someone can fix this: 1MvPAKp3HgotDnZhQYv99gWoTCVxBdFmpzPlease somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
fixed and fixed.
January 25, 2018, 06:29:26 AM
Hi all, it's from today i'm working on this wallet ( iSEYT4b5LZiRjCiJgAEoQsbZDQ6gRdxsME) trying YesScript & 7n7 algo.
I have hase/rate & many exchange
https://screenshotscdn.firefoxusercontent.com/images/cdf92469-f401-4990-b38b-fae89131279b.png?download=Screenshot-2018-1-25%200%2001244788%20INN%20-%20zpool.png&sig=1ds-csbDN0M9SUNnxFF7QxNPKFM
But no one profit on my balance.
Can anyone explain me witch problem can i have pls?
since yesterday all works good.
Thankyou
I have hase/rate & many exchange
https://screenshotscdn.firefoxusercontent.com/images/cdf92469-f401-4990-b38b-fae89131279b.png?download=Screenshot-2018-1-25%200%2001244788%20INN%20-%20zpool.png&sig=1ds-csbDN0M9SUNnxFF7QxNPKFM
But no one profit on my balance.
Can anyone explain me witch problem can i have pls?
since yesterday all works good.
Thankyou
January 25, 2018, 06:25:35 AM
I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.
Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
I have exactly the same problem. It is all shown as BCH despite the correct -p c=BTC ending in by bat file. Here is my BTC address in case someone can fix this: 1MvPAKp3HgotDnZhQYv99gWoTCVxBdFmpz Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
January 25, 2018, 12:32:24 AM
I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.
Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
If you post the btc address Crack usually checks a few times a day and fixes it for people. Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
January 24, 2018, 11:42:06 PM
Is something wrong with yescrypt pool?
'Stratum connection failed' is been several hours already.
'Stratum connection failed' is been several hours already.
January 24, 2018, 11:34:43 PM
I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.
Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.
How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!
Jump to: