Just was thinking are u using A3256Q48 which are 300 MH/s or the A3255Q48 1 GH/s
Topic: Klondike - 16 chip ASIC Open Source Board - Preliminary - page 12. (Read 435376 times)
QualitySeeds,
My guess is that when you send someone money for work performed (and future work needed) they usually accept it. Sooooo .... be a rebel and send the dough :-D
H@shKraker
Aight done it ;-) My guess is that when you send someone money for work performed (and future work needed) they usually accept it. Sooooo .... be a rebel and send the dough :-D
H@shKraker
This is a bit off topic from where this thread is going, but I need a little help if anyone can provide it. I have 2 k16s, fully assembled and visually everything checks out, but neither one is recognized when the USB is plugged in. No blinking LEDs, just buzzing caps.
If anyone would mind helping me out, I'd have no problem tipping what I can or test these via your pool/address of choice.
As far as the avalon 2 development is going, I wouldn't mind helping out with that PCB either.
Yo Vl4dim1r Good to see you are still alive ;-) If anyone would mind helping me out, I'd have no problem tipping what I can or test these via your pool/address of choice.
As far as the avalon 2 development is going, I wouldn't mind helping out with that PCB either.
about the problem i do not know but it sounds like or something with the power supply or with a regulator on pcb board but thats just guessing hope someone here can help you further
Guys, if you want to pay for the PCB, I'm ok with that.
Other components are on the way (should be here next week). I do have couple of 55nm Avalon samples in hand and I'll use the same stencil as for the first design, so the PCB is the only thing left to order.
Couple of options here:
I can order single PCB locally for 115.90€ exactly, delivered within 5 days,
or I can order about 10 PCB's for about the same amount from China (one PCB costs 9.90$ there, they can be bought in batches of 10, so 99$ total). The only issue here could be the delivery date, since stuff from China usually takes up to three weeks to arrive here. I'll try to contact guys from the company and ask them about delivery dates.
So if you're willing to wait a little bit longer, I would be able to send everyone, who would participate, one PCB (since I'll be needing only one, two if I mess something up).
So let me know what do you think.
well i would like to participate and willing to pay 75% of the pcb costs please provide me with ur btc address (sow i can pay)Other components are on the way (should be here next week). I do have couple of 55nm Avalon samples in hand and I'll use the same stencil as for the first design, so the PCB is the only thing left to order.
Couple of options here:
I can order single PCB locally for 115.90€ exactly, delivered within 5 days,
or I can order about 10 PCB's for about the same amount from China (one PCB costs 9.90$ there, they can be bought in batches of 10, so 99$ total). The only issue here could be the delivery date, since stuff from China usually takes up to three weeks to arrive here. I'll try to contact guys from the company and ask them about delivery dates.
So if you're willing to wait a little bit longer, I would be able to send everyone, who would participate, one PCB (since I'll be needing only one, two if I mess something up).
So let me know what do you think.
Just would like to know if u can get a stencil with the pcb's ? and its your choice when it comes to the delivery date i will order the Gen2 chips today takes a while to get here as well
Is the BOM file ready ? and if you want can u sent me the Gerber files sow i can ask a couple fabs to see what they say about pricing
Using linux since today and sill have to install Kicad (will do that later today)
Regards, And keep it up
EDIT: I have send it to you address
Withdraw 0.10000000 BTC
Bitcoin withdraw to 1CKscJAxjdhbJjJPJ9AzL2dWTmB6oc49UE
from 1L8LKPbpAc3RvsL3wJdqCG2BRmHbXqxKxy
This is a bit off topic from where this thread is going, but I need a little help if anyone can provide it. I have 2 k16s, fully assembled and visually everything checks out, but neither one is recognized when the USB is plugged in. No blinking LEDs, just buzzing caps.
If anyone would mind helping me out, I'd have no problem tipping what I can or test these via your pool/address of choice.
As far as the avalon 2 development is going, I wouldn't mind helping out with that PCB either.
If anyone would mind helping me out, I'd have no problem tipping what I can or test these via your pool/address of choice.
As far as the avalon 2 development is going, I wouldn't mind helping out with that PCB either.
Guys, if you want to pay for the PCB, I'm ok with that.
Other components are on the way (should be here next week). I do have couple of 55nm Avalon samples in hand and I'll use the same stencil as for the first design, so the PCB is the only thing left to order.
Couple of options here:
I can order single PCB locally for 115.90€ exactly, delivered within 5 days,
or I can order about 10 PCB's for about the same amount from China (one PCB costs 9.90$ there, they can be bought in batches of 10, so 99$ total). The only issue here could be the delivery date, since stuff from China usually takes up to three weeks to arrive here. I'll try to contact guys from the company and ask them about delivery dates.
So if you're willing to wait a little bit longer, I would be able to send everyone, who would participate, one PCB (since I'll be needing only one, two if I mess something up).
So let me know what do you think.
Other components are on the way (should be here next week). I do have couple of 55nm Avalon samples in hand and I'll use the same stencil as for the first design, so the PCB is the only thing left to order.
Couple of options here:
I can order single PCB locally for 115.90€ exactly, delivered within 5 days,
or I can order about 10 PCB's for about the same amount from China (one PCB costs 9.90$ there, they can be bought in batches of 10, so 99$ total). The only issue here could be the delivery date, since stuff from China usually takes up to three weeks to arrive here. I'll try to contact guys from the company and ask them about delivery dates.
So if you're willing to wait a little bit longer, I would be able to send everyone, who would participate, one PCB (since I'll be needing only one, two if I mess something up).
So let me know what do you think.
anyone got assembled boards without the hashing chips laying around? looking to buy 2 for testing purposes.
QualitySeeds,
My guess is that when you send someone money for work performed (and future work needed) they usually accept it. Sooooo .... be a rebel and send the dough :-D
H@shKraker
My guess is that when you send someone money for work performed (and future work needed) they usually accept it. Sooooo .... be a rebel and send the dough :-D
H@shKraker
Zipiju,
Earlier you mentioned
I have a GREAT idea on how to handle this. How about you post a payment address and eight folks step up to send you the BTC equiv of 120€/8 (i.e. btc equiv of 15€). Since WAY more than 8 folks are gonna benefit from your work it seems that slicing 120 by 8 makes a small amount for us to pay in order to directly participate in / support your efforts. Count me in as one of the 8 who pays by the way. Also, when one pays their 1/8 amount they should post the transaction info in this thread so you can see when all 8 have paid and so that only the proper amount gets transferred your way.
H@shKraker
I'm in guys but waiting for Zipiju see what he thinks also im willing to pay even more if it helps out let me know, been reading this thread for a long time and hope its all gonna work out at the end...(would like to build my own unit as well)Earlier you mentioned
Quote
Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest).
I have a GREAT idea on how to handle this. How about you post a payment address and eight folks step up to send you the BTC equiv of 120€/8 (i.e. btc equiv of 15€). Since WAY more than 8 folks are gonna benefit from your work it seems that slicing 120 by 8 makes a small amount for us to pay in order to directly participate in / support your efforts. Count me in as one of the 8 who pays by the way. Also, when one pays their 1/8 amount they should post the transaction info in this thread so you can see when all 8 have paid and so that only the proper amount gets transferred your way.
H@shKraker
Good luck
Zipiju,
To participate in the funding of the prototype K16s-55 PCBs I have sent you .02BTC (slightly more than 1/8 of the PCB cost) per ->
Status: 0/unconfirmed, broadcast through 1 node
Date: 12/3/2013 19:58
To: My part of PCB funding for Zipiju 1CKscJAxjdhbJjJPJ9AzL2dWTmB6oc49UE
Debit: -0.02 BTC
Transaction fee: -0.0001 BTC
Net amount: -0.0201 BTC
Transaction ID: 90a7759960eef41caf64b8c3204123b8ccb2a1e5726fc33159a377692879faea
It sure would be cool if others participated as well so Zipiju can get the blank PCB printed for testing.
H@shKraker
To participate in the funding of the prototype K16s-55 PCBs I have sent you .02BTC (slightly more than 1/8 of the PCB cost) per ->
Status: 0/unconfirmed, broadcast through 1 node
Date: 12/3/2013 19:58
To: My part of PCB funding for Zipiju 1CKscJAxjdhbJjJPJ9AzL2dWTmB6oc49UE
Debit: -0.02 BTC
Transaction fee: -0.0001 BTC
Net amount: -0.0201 BTC
Transaction ID: 90a7759960eef41caf64b8c3204123b8ccb2a1e5726fc33159a377692879faea
It sure would be cool if others participated as well so Zipiju can get the blank PCB printed for testing.
H@shKraker
Zipiju,
Earlier you mentioned
I have a GREAT idea on how to handle this. How about you post a payment address and eight folks step up to send you the BTC equiv of 120€/8 (i.e. btc equiv of 15€). Since WAY more than 8 folks are gonna benefit from your work it seems that slicing 120 by 8 makes a small amount for us to pay in order to directly participate in / support your efforts. Count me in as one of the 8 who pays by the way. Also, when one pays their 1/8 amount they should post the transaction info in this thread so you can see when all 8 have paid and so that only the proper amount gets transferred your way.
H@shKraker
Earlier you mentioned
Quote
Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest).
I have a GREAT idea on how to handle this. How about you post a payment address and eight folks step up to send you the BTC equiv of 120€/8 (i.e. btc equiv of 15€). Since WAY more than 8 folks are gonna benefit from your work it seems that slicing 120 by 8 makes a small amount for us to pay in order to directly participate in / support your efforts. Count me in as one of the 8 who pays by the way. Also, when one pays their 1/8 amount they should post the transaction info in this thread so you can see when all 8 have paid and so that only the proper amount gets transferred your way.
H@shKraker
I like that idea, count me in if Zipiju agrees.
I've got a K16 sitting here hashing now, and I'd love to add some Avalon2 versions alongside it!
Zipiju,
Earlier you mentioned
I have a GREAT idea on how to handle this. How about you post a payment address and eight folks step up to send you the BTC equiv of 120€/8 (i.e. btc equiv of 15€). Since WAY more than 8 folks are gonna benefit from your work it seems that slicing 120 by 8 makes a small amount for us to pay in order to directly participate in / support your efforts. Count me in as one of the 8 who pays by the way. Also, when one pays their 1/8 amount they should post the transaction info in this thread so you can see when all 8 have paid and so that only the proper amount gets transferred your way.
H@shKraker
Earlier you mentioned
Quote
Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest).
I have a GREAT idea on how to handle this. How about you post a payment address and eight folks step up to send you the BTC equiv of 120€/8 (i.e. btc equiv of 15€). Since WAY more than 8 folks are gonna benefit from your work it seems that slicing 120 by 8 makes a small amount for us to pay in order to directly participate in / support your efforts. Count me in as one of the 8 who pays by the way. Also, when one pays their 1/8 amount they should post the transaction info in this thread so you can see when all 8 have paid and so that only the proper amount gets transferred your way.
H@shKraker
The PCB mod (SSOP version) is completed.
I'll upload modified BOM and Kicad files to the Github (probably tomorrow, I want to check it one more time, it's late here and BOM isn't ready).
As of now, the mod is UNTESTED! I've ordered all the components needed (from Mouser), but I'm now looking for some cheap PCB fab. Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest). So if anyone knows some cheap PCB fab in EU, let me know. Otherwise, I'll have to order it from US.
And the mod is still using IR3895, so the board will be probably about 4 times faster than the original one.
This is the change for the 55nm Avalon chips right?I'll upload modified BOM and Kicad files to the Github (probably tomorrow, I want to check it one more time, it's late here and BOM isn't ready).
As of now, the mod is UNTESTED! I've ordered all the components needed (from Mouser), but I'm now looking for some cheap PCB fab. Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest). So if anyone knows some cheap PCB fab in EU, let me know. Otherwise, I'll have to order it from US.
And the mod is still using IR3895, so the board will be probably about 4 times faster than the original one.
How many parts got changed ?
Yes.
Basically just three. Five when I count swapping the resistors.
Guys, sorry for the delay.
The design is at https://github.com/zipiju/klondike/tree/master/kicad/k16s-55. There are also exported gerbers.
The BOM isn't ready yet. I haven't had time to do it. I'll try to do it today (tonight).
Basically, onlytwo three componenents are changed:
- for each board you will need two of this LDO's for PLL voltage: NCP694D10HT1G
- and one 25MHz oscillator: ASDMB-25.000MHZ-LC-T (this has the same footprint as the old one)
There are also two resistors changed for Core regulator (basically they are just swapped - 4.02K for 2.87k and 2.87k for 4.02k, so no need to order new).
Also, I recommend to use 2A 3.3V reg., as stated at projectklondike.org in optional changes.
And in the schematics, it's possible, that the oscillator value is still 32MHz, so ignore that for now. I'll change that later too.
The design is at https://github.com/zipiju/klondike/tree/master/kicad/k16s-55. There are also exported gerbers.
The BOM isn't ready yet. I haven't had time to do it. I'll try to do it today (tonight).
Basically, only
- for each board you will need two of this LDO's for PLL voltage: NCP694D10HT1G
- and one 25MHz oscillator: ASDMB-25.000MHZ-LC-T (this has the same footprint as the old one)
There are also two resistors changed for Core regulator (basically they are just swapped - 4.02K for 2.87k and 2.87k for 4.02k, so no need to order new).
Also, I recommend to use 2A 3.3V reg., as stated at projectklondike.org in optional changes.
And in the schematics, it's possible, that the oscillator value is still 32MHz, so ignore that for now. I'll change that later too.
Zipiju,
Hey boss man, when you update the BOM please update the XLS and send an update OR send me the updates and I can do it with pricing info. Thanks for your hard work.
H@shKraker
And thank u as well for your work :-) Love to see the project is still alive and kicking Hey boss man, when you update the BOM please update the XLS and send an update OR send me the updates and I can do it with pricing info. Thanks for your hard work.
H@shKraker
The PCB mod (SSOP version) is completed.
I'll upload modified BOM and Kicad files to the Github (probably tomorrow, I want to check it one more time, it's late here and BOM isn't ready).
As of now, the mod is UNTESTED! I've ordered all the components needed (from Mouser), but I'm now looking for some cheap PCB fab. Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest). So if anyone knows some cheap PCB fab in EU, let me know. Otherwise, I'll have to order it from US.
And the mod is still using IR3895, so the board will be probably about 4 times faster than the original one.
Sweet :-) your hard work is appreciated will check it out when you its it on Github I'll upload modified BOM and Kicad files to the Github (probably tomorrow, I want to check it one more time, it's late here and BOM isn't ready).
As of now, the mod is UNTESTED! I've ordered all the components needed (from Mouser), but I'm now looking for some cheap PCB fab. Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest). So if anyone knows some cheap PCB fab in EU, let me know. Otherwise, I'll have to order it from US.
And the mod is still using IR3895, so the board will be probably about 4 times faster than the original one.
Can i help u out with the pcb ordering/paying and you send me the components from mouser or something in that aria
If we can make some kind of a deal pm me
Zipiju,
Hey boss man, when you update the BOM please update the XLS and send an update OR send me the updates and I can do it with pricing info. Thanks for your hard work.
H@shKraker
Hey boss man, when you update the BOM please update the XLS and send an update OR send me the updates and I can do it with pricing info. Thanks for your hard work.
H@shKraker
The PCB mod (SSOP version) is completed.
I'll upload modified BOM and Kicad files to the Github (probably tomorrow, I want to check it one more time, it's late here and BOM isn't ready).
As of now, the mod is UNTESTED! I've ordered all the components needed (from Mouser), but I'm now looking for some cheap PCB fab. Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest). So if anyone knows some cheap PCB fab in EU, let me know. Otherwise, I'll have to order it from US.
And the mod is still using IR3895, so the board will be probably about 4 times faster than the original one.
This is the change for the 55nm Avalon chips right?I'll upload modified BOM and Kicad files to the Github (probably tomorrow, I want to check it one more time, it's late here and BOM isn't ready).
As of now, the mod is UNTESTED! I've ordered all the components needed (from Mouser), but I'm now looking for some cheap PCB fab. Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest). So if anyone knows some cheap PCB fab in EU, let me know. Otherwise, I'll have to order it from US.
And the mod is still using IR3895, so the board will be probably about 4 times faster than the original one.
How many parts got changed ?
The PCB mod (SSOP version) is completed.
I'll upload modified BOM and Kicad files to the Github (probably tomorrow, I want to check it one more time, it's late here and BOM isn't ready).
As of now, the mod is UNTESTED! I've ordered all the components needed (from Mouser), but I'm now looking for some cheap PCB fab. Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest). So if anyone knows some cheap PCB fab in EU, let me know. Otherwise, I'll have to order it from US.
And the mod is still using IR3895, so the board will be probably about 4 times faster than the original one.
I'll upload modified BOM and Kicad files to the Github (probably tomorrow, I want to check it one more time, it's late here and BOM isn't ready).
As of now, the mod is UNTESTED! I've ordered all the components needed (from Mouser), but I'm now looking for some cheap PCB fab. Here, one 4 layer PCB costs about 120€ with shipping, which I'm not willing to pay (I can't afford it to be honest). So if anyone knows some cheap PCB fab in EU, let me know. Otherwise, I'll have to order it from US.
And the mod is still using IR3895, so the board will be probably about 4 times faster than the original one.
Be forewarned ..... the chances of you getting an earful from wifey when you spin up one of those HP PSUs is GREATLY increased.
H@shKraker
H@shKraker
Jump to: