KEfbwMY9ZoPwoGSscqbhTjCVmYaGkSQQMQ
Can somebody send me a message to test voip wallet? Thanks.
Topic: ★★ KoreCoin v2.0 ★★ [KORE]New ERA - VOIP WALLET -100% ANON - 100% PoS - PoBAnon - page 156. (Read 372334 times)
September 16, 2014, 09:19:59 AM
September 16, 2014, 09:14:25 AM
Community here is the video showing address to address calll, here is the link> https://www.youtube.com/watch?v=HzWDAnVEHoE&feature=youtu.be
Thanks Mxrider420z and MikeMike for that video sample of the VoIP calls.
Nice to hear that you finally recorded that video in time!
The system? Very simple, intuitive and with high-quality.
That's awesome! 
September 16, 2014, 09:02:06 AM
The new revolutionary PobAnon technology (Will be released on the first of october)
From the dev:
"About the anonymous feature, I can start to explain the based idea. I've not tell about it before because I wanted to be sure that I can do it. I've start to work on it with good results.
I've think very much for find a good solution for give a REAL anonymous to the users, and all ideas that I've find around the forum it's only words.
The truth is that you never can hide the transactions because your coins can exists only in two situation... first if you have mined it, two if you have receive it from another user that have received too or have mined it.
If you going to delete/hide the transactions, coins simple don't exist anymore in chain. Of course you can encrypt it and give to the wallet the keys for uncrypt and read it. But if the wallet can uncrypt and read the encrypt TXs, all can do the same, and your anonymous feature going to be unuseless.
Finally I've find a crazy idea.
It's PoB based. PoB means Proof of Burn, is working when people send coins to a special address, this coins going to be destroy, and user take back a block with the same amount plus a interest. Usually PoB working with the same address that have send.
Now my solution. User that want to hide the sources of his coins, simple send coins to special Kore address, select the address where want to receive the new coins, and wait a random number of blocks. After this he going to receive the same coins burned, like he have mined it. New address, generation, no history of this coins, totaly anonymous.
The old coins going to be stored in the special and unspendable address and subtracted from the total coins.
I have not very much interesting to use PoB for network maintenance. I want to use it like washing machine. And of course, I've already write it, the destination address will be an unspendable address. I've to calc the checksum yet, but it will be like "KoreCoinDestroyMachineXXXXXX". "
From the dev:
"About the anonymous feature, I can start to explain the based idea. I've not tell about it before because I wanted to be sure that I can do it. I've start to work on it with good results.
I've think very much for find a good solution for give a REAL anonymous to the users, and all ideas that I've find around the forum it's only words.
The truth is that you never can hide the transactions because your coins can exists only in two situation... first if you have mined it, two if you have receive it from another user that have received too or have mined it.
If you going to delete/hide the transactions, coins simple don't exist anymore in chain. Of course you can encrypt it and give to the wallet the keys for uncrypt and read it. But if the wallet can uncrypt and read the encrypt TXs, all can do the same, and your anonymous feature going to be unuseless.
Finally I've find a crazy idea.
It's PoB based. PoB means Proof of Burn, is working when people send coins to a special address, this coins going to be destroy, and user take back a block with the same amount plus a interest. Usually PoB working with the same address that have send.
Now my solution. User that want to hide the sources of his coins, simple send coins to special Kore address, select the address where want to receive the new coins, and wait a random number of blocks. After this he going to receive the same coins burned, like he have mined it. New address, generation, no history of this coins, totaly anonymous.
The old coins going to be stored in the special and unspendable address and subtracted from the total coins.
I have not very much interesting to use PoB for network maintenance. I want to use it like washing machine. And of course, I've already write it, the destination address will be an unspendable address. I've to calc the checksum yet, but it will be like "KoreCoinDestroyMachineXXXXXX". "
September 16, 2014, 08:52:48 AM
maybe we need to spread the word about KORE Voip
this is the guy of www.CryptoArticles.com , https://bitcointalksearch.org/user/jdebunt-28364 ,
maybe the dev or the marketing guy could contact him and ask if he would like to write a small article about KOREcoin and this new feature
a lot of people don`t know even about it
this is the guy of www.CryptoArticles.com , https://bitcointalksearch.org/user/jdebunt-28364 ,
maybe the dev or the marketing guy could contact him and ask if he would like to write a small article about KOREcoin and this new feature
a lot of people don`t know even about it
Might be a good idea to wait a few days till the bugs are worked out.
Then they will be putting out articles without asking.
CryptoArticles.com already put out two articles on KORE.
They knew of the release date.
I'm sure they will put another out if they feel it's warranted.
Plus we've got something to market KORE that's a bit Earth Shattering.
It will be done when the time is right.
Those who know I don't talk shtick will realize what that means.
September 16, 2014, 08:51:17 AM
Community here is the video showing address to address calll, here is the link> https://www.youtube.com/watch?v=HzWDAnVEHoE&feature=youtu.be
A real thanks to Maxryder and Mike for this spectacular video!
September 16, 2014, 08:45:10 AM
September 16, 2014, 08:14:50 AM
Community here is the video showing address to address calll, here is the link> https://www.youtube.com/watch?v=HzWDAnVEHoE&feature=youtu.be
And like it´s been said there is a few bugs which will get sorted out on the coming updates.
Apologies for the less than professional video. We´ve been up for nearly 2 days.
And follow the steps posted below by MikeMike
And like it´s been said there is a few bugs which will get sorted out on the coming updates.
Apologies for the less than professional video. We´ve been up for nearly 2 days.
And follow the steps posted below by MikeMike
FIRST:
Let's get you all using the VoIP Feature.
FYI: Both of us DO NOT have port 5060 open forwarding selected.
However it works if you forward port 5060.
1-You will be creating the call Direct.
2-Go to the "Receive Address Tab" and create a new address.
Label it however you like. Might makes sense to designate it your VoIP Address.
3-Right Click the Address and choose the bottom option "Set VoIP Account".
4-Go to "VoIP Calls" tab and click on the "REGISTER" box.
5-Enter the Address you'd like to call in the "Direct Calling/IM" box near the bottom.
You will see two tiny boxes on the right. Click on the "Left Tiny Box" to dial.
(DO NOT click the "Call Buddy" box)
6-Watch the "Call Status" box, You will see it say "Calling".
Whoever is Receiving the call has to accept the call by clicking "Answer Call"
that will show in the box above the "Call Status" box.
7-To hang up simply click "Hang Up".
ENJOY!
NOTE: The call goes through very fast nearly instantly.
Thanks Eurbids for all your hard work!
Let's get you all using the VoIP Feature.
FYI: Both of us DO NOT have port 5060 open forwarding selected.
However it works if you forward port 5060.
1-You will be creating the call Direct.
2-Go to the "Receive Address Tab" and create a new address.
Label it however you like. Might makes sense to designate it your VoIP Address.
3-Right Click the Address and choose the bottom option "Set VoIP Account".
4-Go to "VoIP Calls" tab and click on the "REGISTER" box.
5-Enter the Address you'd like to call in the "Direct Calling/IM" box near the bottom.
You will see two tiny boxes on the right. Click on the "Left Tiny Box" to dial.
(DO NOT click the "Call Buddy" box)
6-Watch the "Call Status" box, You will see it say "Calling".
Whoever is Receiving the call has to accept the call by clicking "Answer Call"
that will show in the box above the "Call Status" box.
7-To hang up simply click "Hang Up".
ENJOY!
NOTE: The call goes through very fast nearly instantly.
Thanks Eurbids for all your hard work!
Very cool Indeed congrats core community!
September 16, 2014, 08:05:47 AM
Community here is the video showing address to address calll, here is the link> https://www.youtube.com/watch?v=HzWDAnVEHoE&feature=youtu.be
And like it´s been said there is a few bugs which will get sorted out on the coming updates.
Apologies for the less than professional video. We´ve been up for nearly 2 days.
And follow the steps posted below by MikeMike
And like it´s been said there is a few bugs which will get sorted out on the coming updates.
Apologies for the less than professional video. We´ve been up for nearly 2 days.
And follow the steps posted below by MikeMike
FIRST:
Let's get you all using the VoIP Feature.
FYI: Both of us DO NOT have port 5060 open forwarding selected.
However it works if you forward port 5060.
1-You will be creating the call Direct.
2-Go to the "Receive Address Tab" and create a new address.
Label it however you like. Might makes sense to designate it your VoIP Address.
3-Right Click the Address and choose the bottom option "Set VoIP Account".
4-Go to "VoIP Calls" tab and click on the "REGISTER" box.
5-Enter the Address you'd like to call in the "Direct Calling/IM" box near the bottom.
You will see two tiny boxes on the right. Click on the "Left Tiny Box" to dial.
(DO NOT click the "Call Buddy" box)
6-Watch the "Call Status" box, You will see it say "Calling".
Whoever is Receiving the call has to accept the call by clicking "Answer Call"
that will show in the box above the "Call Status" box.
7-To hang up simply click "Hang Up".
ENJOY!
NOTE: The call goes through very fast nearly instantly.
Thanks Eurbids for all your hard work!
Let's get you all using the VoIP Feature.
FYI: Both of us DO NOT have port 5060 open forwarding selected.
However it works if you forward port 5060.
1-You will be creating the call Direct.
2-Go to the "Receive Address Tab" and create a new address.
Label it however you like. Might makes sense to designate it your VoIP Address.
3-Right Click the Address and choose the bottom option "Set VoIP Account".
4-Go to "VoIP Calls" tab and click on the "REGISTER" box.
5-Enter the Address you'd like to call in the "Direct Calling/IM" box near the bottom.
You will see two tiny boxes on the right. Click on the "Left Tiny Box" to dial.
(DO NOT click the "Call Buddy" box)
6-Watch the "Call Status" box, You will see it say "Calling".
Whoever is Receiving the call has to accept the call by clicking "Answer Call"
that will show in the box above the "Call Status" box.
7-To hang up simply click "Hang Up".
ENJOY!
NOTE: The call goes through very fast nearly instantly.
Thanks Eurbids for all your hard work!
That's pretty good, Mxrider, considering "production at the drop of a hat". Thanks for your work. Thanks to Mike too, of course, and thanks Eurbids and all of the Team.
September 16, 2014, 08:04:41 AM
The KORE of the KORE Community built trust in the DEV Eurbids
being able to see the he was the real deal.
WE know the importance of patience and dedication to
quite possibly the most feature packed ground breaking
Tech. to date.
KORE and it's DEV WILL ALWAYS BE the "HENRY FORD" of the ANON Alt Currencies.
FIRST with a functional TOR Embedded PoS wallet.
FIRST with VoIP Address to Address phone calls.
FIRST with a DEV who tells it like it is proving by
his actions what he says about his capable
creative ground breaking innovations.
WE know KORE is worth every penny of .01+ at this moment in time.
It's just a matter of time before the rest of the World does too.
being able to see the he was the real deal.
WE know the importance of patience and dedication to
quite possibly the most feature packed ground breaking
Tech. to date.
KORE and it's DEV WILL ALWAYS BE the "HENRY FORD" of the ANON Alt Currencies.
FIRST with a functional TOR Embedded PoS wallet.
FIRST with VoIP Address to Address phone calls.
FIRST with a DEV who tells it like it is proving by
his actions what he says about his capable
creative ground breaking innovations.
WE know KORE is worth every penny of .01+ at this moment in time.
It's just a matter of time before the rest of the World does too.
September 16, 2014, 07:46:48 AM
Thank you!!!
September 16, 2014, 07:40:46 AM
Community here is the video showing address to address calll, here is the link> https://www.youtube.com/watch?v=HzWDAnVEHoE&feature=youtu.be
And like it´s been said there is a few bugs which will get sorted out on the coming updates.
Apologies for the less than professional video. We´ve been up for nearly 2 days.
And follow the steps posted below by MikeMike
And like it´s been said there is a few bugs which will get sorted out on the coming updates.
Apologies for the less than professional video. We´ve been up for nearly 2 days.
And follow the steps posted below by MikeMike
FIRST:
Let's get you all using the VoIP Feature.
FYI: Both of us DO NOT have port 5060 open forwarding selected.
However it works if you forward port 5060.
1-You will be creating the call Direct.
2-Go to the "Receive Address Tab" and create a new address.
Label it however you like. Might makes sense to designate it your VoIP Address.
3-Right Click the Address and choose the bottom option "Set VoIP Account".
4-Go to "VoIP Calls" tab and click on the "REGISTER" box.
5-Enter the Address you'd like to call in the "Direct Calling/IM" box near the bottom.
You will see two tiny boxes on the right. Click on the "Left Tiny Box" to dial.
(DO NOT click the "Call Buddy" box)
6-Watch the "Call Status" box, You will see it say "Calling".
Whoever is Receiving the call has to accept the call by clicking "Answer Call"
that will show in the box above the "Call Status" box.
7-To hang up simply click "Hang Up".
ENJOY!
NOTE: The call goes through very fast nearly instantly.
Thanks Eurbids for all your hard work!
Let's get you all using the VoIP Feature.
FYI: Both of us DO NOT have port 5060 open forwarding selected.
However it works if you forward port 5060.
1-You will be creating the call Direct.
2-Go to the "Receive Address Tab" and create a new address.
Label it however you like. Might makes sense to designate it your VoIP Address.
3-Right Click the Address and choose the bottom option "Set VoIP Account".
4-Go to "VoIP Calls" tab and click on the "REGISTER" box.
5-Enter the Address you'd like to call in the "Direct Calling/IM" box near the bottom.
You will see two tiny boxes on the right. Click on the "Left Tiny Box" to dial.
(DO NOT click the "Call Buddy" box)
6-Watch the "Call Status" box, You will see it say "Calling".
Whoever is Receiving the call has to accept the call by clicking "Answer Call"
that will show in the box above the "Call Status" box.
7-To hang up simply click "Hang Up".
ENJOY!
NOTE: The call goes through very fast nearly instantly.
Thanks Eurbids for all your hard work!
September 16, 2014, 07:10:07 AM
WOW! AMAZING!!
Thank you very much altcoinherald!!!!!!!!
“I called my brother in Australia for his birthday. Brilliant. Might be time to buy some more Kore,” said spud3861
September 16, 2014, 07:07:35 AM
PoS works very nicely and is IMPRESSIVE = exactly 10% starting at 1 hour.
Transactions are super fast...
Transactions are super fast...
is this 10% per year , it doesn`t say anything in the OP
September 16, 2014, 07:05:16 AM
PoS works very nicely and is IMPRESSIVE = exactly 10% starting at 1 hour.
Transactions are super fast...
Transactions are super fast...
September 16, 2014, 06:38:57 AM
Korecoin is THE future...enjoy the evolution or criptos... 
The voice quality is amazing!
September 16, 2014, 06:26:44 AM
Korecoin is THE future...enjoy the evolution or criptos...
September 16, 2014, 06:13:00 AM
it had been as awesome experience so far. respect to eurbids, respect to all the dedicated members of this community who made it happen.
working voip will video will be soon be released..now looking forward to the next milestone on 1st oct. for the beta release.
have a good day every one.
working voip will video will be soon be released..now looking forward to the next milestone on 1st oct. for the beta release.
have a good day every one.
Thank for all your contributions as well, Zain.
September 16, 2014, 06:03:30 AM
1.2 mil pow coins - 200k USD market cap... are you kidding me??
Pala can you please stop posting the same gifs and the same thing over and over and over and over again........... It makes look this thread as a pump and dump coin thread.
If you would like this coin to be long term then adapt the way you are posting in this thread in a professional matter.
Thank you
Please understand there's a language barrier.
Pala has been a dedicated supporter of KORE for a long time.
September 16, 2014, 06:00:37 AM
Just want to say thanks for those cheap 11k KORE
Jump to: