Topic: [KTK] KryptKoin > [PHR] Phore: check new ANN - page 22. (Read 413562 times)

rebranding is good I'm for, but what about the coins that are on the wallet
  

Okay everyone, couple of things...

When the new wallet is ready, to run a masternode will require 10,000.

=====

Other thing, what do people think of a rebrand?

Either use just: Krypt, dropping 'Koin' (domain krypt.cash)

Or complete change...

Phore (domain phore.io)

'bearer of a specified thing'

bearer leads into: a person or thing that carries or holds something.

The main problem is not enough connections!

The nodes I'm going to setup this week, I'll going load a small amount of
coins so will mint new blocks and help keep the blockchain moving.

Is it possible to do a quick fix for the existing wallet to get rid of the sync issues, while we wait for the major release of the wallet?

I'm guessing you're right, I just now synced and it says block #1575818 ... So apparently nobody is staking

If you notice, most of those are not fully synced so not staking either!

No blocks for hours at a time though? I'm up to block #1575811

Last Block Time: Sun Aug 20 08:17:21 2017


12:37:40

[
{
"addr" : "78.46.92.72:58521",
"services" : "00000001",
"lastsend" : 1503250660,
"lastrecv" : 1503250660,
"conntime" : 1503239452,
"version" : 60006,
"subver" : "/KryptKoin:1.5.6/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 1011326,
"banscore" : 0
},
{
"addr" : "88.99.248.15:56500",
"services" : "00000001",
"lastsend" : 1503250660,
"lastrecv" : 1503250660,
"conntime" : 1503239483,
"version" : 60006,
"subver" : "/KryptKoin:1.5.6/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 1011326,
"banscore" : 0
},
{
"addr" : "83.216.95.221:65069",
"services" : "00000001",
"lastsend" : 1503250660,
"lastrecv" : 1503250660,
"conntime" : 1503239532,
"version" : 60006,
"subver" : "/KryptKoin:1.5.6/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 1526888,
"banscore" : 0
},
{
"addr" : "146.185.173.230:46032",
"services" : "00000001",
"lastsend" : 1503250309,
"lastrecv" : 1503246707,
"conntime" : 1503239561,
"version" : 60006,
"subver" : "/KryptKoin:1.5.6/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 1531476,
"banscore" : 0
},
{
"addr" : "159.203.185.23:51412",
"services" : "00000001",
"lastsend" : 1503250049,
"lastrecv" : 1503250049,
"conntime" : 1503240045,
"version" : 60006,
"subver" : "/KryptKoin:1.5.6/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 1538834,
"banscore" : 0
},
{
"addr" : "159.203.178.201:56956",
"services" : "00000001",
"lastsend" : 1503250475,
"lastrecv" : 1503246309,
"conntime" : 1503241221,
"version" : 60006,
"subver" : "/KryptKoin:1.5.6/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 1531858,
"banscore" : 0
},
{
"addr" : "90.252.157.16:50505",
"services" : "00000001",
"lastsend" : 1503250137,
"lastrecv" : 1503250137,
"conntime" : 1503244735,
"version" : 60006,
"subver" : "/KryptKoin:1.5.6/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 1575811,
"banscore" : 0
},
{
"addr" : "174.138.37.32:22788",
"services" : "00000001",
"lastsend" : 1503249672,
"lastrecv" : 1503249672,
"conntime" : 1503247870,
"version" : 60006,
"subver" : "/KryptKoin:1.5.6/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1532190,
"banscore" : 0
},
{
"addr" : "213.205.194.130:55667",
"services" : "00000001",
"lastsend" : 1503250475,
"lastrecv" : 1503250474,
"conntime" : 1503250474,
"version" : 60006,
"subver" : "/KryptKoin:1.5.6/",
"inbound" : true,
"releasetime" : 0,
"startingheight" : 1575811,
"banscore" : 0
}
]

I'm on that too, and not seeing any other connection with more blocks, are you?

getpeerinfo in debug console

I think what you might be seeing, if you are synced but there hasn't been any new
blocks for a while, it starts displaying the sync icon. But actually you are, it's just
not had new blocks!

Having sync issues again.. cannot get past block number 1575799 ... does anybody know a way to fix this?

@KryptKoin

wow! you are back! nice to see. how are you? Hope everything s fine now!
i had to sell all my coins but i m still with you!

wish you all the best!




ps: if you need another german translation,.....

didbt work wallet clouse

Ok, I've now updated the OP with the blockchain (blockheight 1601694).

https://www.dropbox.com/s/th064e09eaxtr7c/KryptKoin_bc.zip


Will start adding new nodes to see if that helps us with the syncing.


If anyone loads the blockchain file and seem to have coins missing, try
in the debug console:

checkwallet

It will tell you if there is a mismatch, if so enter:

repairwallet

Afterwards reload wallet.

No matter what I do, I cannot resync with the network if I use my wallet.dat with coins in it.... if I use an empty wallet I will sync with the network fine, but as soon as I use a wallet with coins the client stops downloading blocks... last downloaded block 45 minutes ago...? Does anybody have any idea how to fix this??? I've even tried importing private keys to new wallet.dat and using old wallet.dat from 2014 and the same result.. Blockchain download stalls if you use wallet with coins  


EDIT: I don't know how or why, but it FINALLY synced to the network last night and I was able to consolidate all my coins into one pile, however I wake up this morning again and its an hour behind again and not syncing.... thankfully the last consolidation move I made has 883 confirmations.. so I know everything is in one pile... but at this point I dont think I'm even going to start staking again considering how much of a problem it is just to fix the piles with all the sync issues.... might as well just leave them in one pile until the swap happens

A supply of  17,950,686 total coins is very low and this coin will have a great potential for the future. The initial ditribution of this coin was also fair and clean.
Huge potential ahead.

I'm pretty sure I'm on the 1,571,xxx chain but I'm not synced, I lost connection to the network overnight and now I cant resync

I see you managed to work around the error, but did you have coins staking?

And those 'lost' coins will stake again.


Looking at the connections in the console, those 2 connections with 1,569,xxx blocks
yesterday (16th) are now at 1,571,xxx and 1,572,xxx

The nodes already setup are only at 1,531,xxx and cannot sync quick enough when
those 2 connections are generating blocks so quickly. We need more connections
but before adding more nodes to try and help, I want a copy of their blockchain files.

I hope one of those visit the thread and provide a copy, so I can use. And they
consolidate their addresses to decrease the generating blocks!


Current supply is at 17,950,686. It's not increasing by much even though the blocks
being generated at at high rate.

Trying to download blockchain again to fix this... and somehow I lose coins when I do this... I'm about to give up on this, wallet locks up constantly, have to repeatedly redownload blockchain... losing coins.....

I'm trying to do that as well, my problem is I have multiple connections to the network but I cant seem to download the blockchain... last block was 22 hours ago...

I am trying to consolidate, I usually tried to keep the number of coin piles in my wallet below 100, but recently I can't even manage to get that far, the wallet locks up after a few minutes...

When can we expect a smooth running brand new wallet? I am not trying to start the old one anymore as its giving headache everytime I try to stake with it.