LightningAsic usb miners based Gridseed GC3355 Tech Support Thread - page 4.

dyland

full member

Activity: 238

Merit: 100

We must become the pitiless censors of ourselves.

Quote from: miner765 on March 22, 2014, 08:47:55 PM

Would anyone be interested in buying the Raspberry PI+SD+Power Adapter with loaded cgminer? Plug and play package for gridseed. One is good for 20 miners. I ended up having extra two, willing to sell a little lower than retail price.

I might be yes.

Pm me with price.

Currently have full kit (supplied controller). Plug and play with full kit?

asiabtc

legendary

Activity: 986

Merit: 1000

Crypto Currency , Mining, Exchange ATM, Wallet!

Quote from: forzendiablo on March 22, 2014, 03:51:02 PM

how do i use it with windows ?
do i just downlaod the driver?

1, you need to downlaod st driver,
2, you need to downlaod cgminer.
3, run it with right config command.

miner765

member

Activity: 96

Merit: 10

Would anyone be interested in buying the Raspberry PI+SD+Power Adapter with loaded cgminer? Plug and play package for gridseed. One is good for 20 miners. I ended up having extra two, willing to sell a little lower than retail price.

forzendiablo

legendary

Activity: 1526

Merit: 1000

the grandpa of cryptos

how do i use it with windows ?
do i just downlaod the driver?

FreeJack2k2

sr. member

Activity: 364

Merit: 250

Quote from: ineedit on March 22, 2014, 02:54:47 AM

Quote from: xstr8guy on March 22, 2014, 01:07:21 AM

You folks need to read up on KNC's reputation a bit more. They're total scumbags. I promise you that they will destroy Scrypt mining for the masses just as they have done for BTC mining.

Then the masses will do the same as they have before and move to the next algorithm, SHA256 to Scrypt, Scrypt to Scrypt-N

This is I think the big fight that is going on behind the scenes especially as the big mining hardware companies are building their own datacentres to become the new bank equivalents of the future that are able to reap the transaction payment reward.

Only problem is, with each new "generation" of coins the pool of available fiat gets thinner and thinner. Right now there are probably over 100 Scrypt coins and the wealth is concentrated at the top, and trickles down to the "little guys." Some of that money has migrated to Vertcoin, but not much. I don't think we're going to see a repeat of Litecoin, with Vertcoin...the money just isn't there right now. So even if all the current GPU hardware migrates to Vertcoin and drives that difficulty into the stratosphere, I don't think the investment capital is out there for Vertcoin's price to go that high. Time will tell though, I guess.

Personally, my belief is that ASICs have a legitimizing effect on crypto-currency, in the public eye. The image of a data center with rackmount systems is what most people want to see as the backbone of the financial network they use. A garage full of cobbled-together GPU systems with fans pointed at them doesn't scream, "Secure Financial Network" to the layman. Then there's the resistance to botnets and viral infiltration, which is a big benefit as well.

ineedit

sr. member

Activity: 252

Merit: 250

Quote from: xstr8guy on March 22, 2014, 01:07:21 AM

You folks need to read up on KNC's reputation a bit more. They're total scumbags. I promise you that they will destroy Scrypt mining for the masses just as they have done for BTC mining.

Then the masses will do the same as they have before and move to the next algorithm, SHA256 to Scrypt, Scrypt to Scrypt-N

This is I think the big fight that is going on behind the scenes especially as the big mining hardware companies are building their own datacentres to become the new bank equivalents of the future that are able to reap the transaction payment reward.

xstr8guy

hero member

Activity: 784

Merit: 1004

Glow Stick Dance!

You folks need to read up on KNC's reputation a bit more. They're total scumbags. I promise you that they will destroy Scrypt mining for the masses just as they have done for BTC mining.

wasubii

sr. member

Activity: 448

Merit: 250

Gridseed ATX PSU cables here:

https://bitcointalksearch.org/topic/wts-in-stock-gridseed-atx-psu-pcie-molex-to-21mm-barrel-power-cables-523101

FreeJack2k2

sr. member

Activity: 364

Merit: 250

Quote from: wasubii on March 21, 2014, 04:29:49 AM

Quote from: FreeJack2k2 on March 20, 2014, 10:12:34 PM

The price per hash was never awe-inspiring on the Gridseeds. I bought in based on the screen shot of 10Mh/s per 20 that Jack posted as a "secret photo" but unfortunately, the 6.5Mh/s average I get (with all the resets) is a far cry from that and it doesn't translate into anywhere close to the same income that was expected with the 10Mh/s numbers.

Yeah - his 'secret photo' was truly a scumbag move.

EDIT: I'm hoping these will get close to break even before the big ASICs all drop (Alpha-T, KnC, Fibonacci, Alcheminer, Flowertech, Zuesminer to name but a few). Most of these are predicting a Q3 launch or later, which may JUST give us time... lets see

EDIT 2: I'm in for 60 miners from Jack - which at the time i bought them could have bought me BTC22. So far i have been splitting my hash between wafflepool and cleverminer (both have good servers in my area and decent BTC/MHD performance) and i have made back BTC1.4

I'm averaging just over 20MH/s using Scripta and RasPi at 800 freq. Hopefully this will increase slightly when I get a Scripta image with 850 freq.

ROI is looking rather bleak as BTC/MHD drops, but I'm banking on the scrypt asic producers running into delays just like all the BTC asic producers to date (although KnC's titan and their delivery track record scares me)

Well the thing about the KNCMiner hardware is, it's completely new. It's not like they could just duplicate what they'd done on their Bitcoin mining hardware, they had to start from scratch...so they've been doing the same thing every other hardware maker's been doing, thus far. Granted, they didn't have to build up any infrastructure to support it as that's already there, so that probably helped them speed up the process a bit...but since it's a brand new product, it remains to be seen if they'll hit their target. So far, Alpha Technology has been very communicative about every step of development and have remained firm in their expectation of hitting a July shipment of the first batch. KNCMiner hasn't shown anybody anything, really...they just decided to spring it on everyone. People are ordering with them based on their Bitcoin track record. It's a good track record and I don't know that there's really any reason not to give them the benefit of the doubt, but saying "We expect to ship Q2/Q3" isn't the same as "We are on schedule to ship in July."

IchibahnSLC

full member

Activity: 182

Merit: 100

Guys check out what one of my miners had:

Someone tell me what that is lol.

wasubii

sr. member

Activity: 448

Merit: 250

Quote from: FreeJack2k2 on March 20, 2014, 10:12:34 PM

The price per hash was never awe-inspiring on the Gridseeds. I bought in based on the screen shot of 10Mh/s per 20 that Jack posted as a "secret photo" but unfortunately, the 6.5Mh/s average I get (with all the resets) is a far cry from that and it doesn't translate into anywhere close to the same income that was expected with the 10Mh/s numbers.

Yeah - his 'secret photo' was truly a scumbag move.

EDIT: I'm hoping these will get close to break even before the big ASICs all drop (Alpha-T, KnC, Fibonacci, Alcheminer, Flowertech, Zuesminer to name but a few). Most of these are predicting a Q3 launch or later, which may JUST give us time... lets see

EDIT 2: I'm in for 60 miners from Jack - which at the time i bought them could have bought me BTC22. So far i have been splitting my hash between wafflepool and cleverminer (both have good servers in my area and decent BTC/MHD performance) and i have made back BTC1.4

I'm averaging just over 20MH/s using Scripta and RasPi at 800 freq. Hopefully this will increase slightly when I get a Scripta image with 850 freq.

ROI is looking rather bleak as BTC/MHD drops, but I'm banking on the scrypt asic producers running into delays just like all the BTC asic producers to date (although KnC's titan and their delivery track record scares me)

FreeJack2k2

sr. member

Activity: 364

Merit: 250

The price per hash was never awe-inspiring on the Gridseeds. I bought in based on the screen shot of 10Mh/s per 20 that Jack posted as a "secret photo" but unfortunately, the 6.5Mh/s average I get (with all the resets) is a far cry from that and it doesn't translate into anywhere close to the same income that was expected with the 10Mh/s numbers.

chup

sr. member

Activity: 736

Merit: 262

Me, Myself & I

Quote from: nikolaz on March 20, 2014, 07:31:58 PM

So what is the typical ROI on these things?

At the beginning of their sale, it was 6 months. Now, like any other ASIC hardware, ROI is ethernal... Undecided

nikolaz

member

Activity: 98

Merit: 10

So what is the typical ROI on these things?

DPoS

sr. member

Activity: 462

Merit: 250

Quote from: Ofenkaese on March 20, 2014, 03:47:26 PM

20 pieces boxed... ;-)
what have you done with your's?

right now I got mine stacked in couple of milk crates... they are actually perfect for these with the holes for airflow

but, I have an extra coolermaster pc case that looks like I can fit 20 gridseeds plus two usb hubs and also power it all with a psu with spliced molex connectors.

I think I can even power the usb hubs with the psu as well but not sure if that is worth the risk.. tempting though to have everything enclosed

DPoS

sr. member

Activity: 462

Merit: 250

Quote from: -droid- on March 20, 2014, 02:15:28 PM

Question:

I made my own PSU connectors for my units with the barrel adapters and it seems like they are not working right.

I had some molex adapters I had leftover from my GPU's with 1 yellow, black, red cable for each adapter. I snipped the red cable and ran the yellow into the + and black into the - on the barrel adapter.

after plugging each adapter into a molex cable from my PSU the units fan turns on the the green light flashes, CGMiner registers the speed of each miner at 360kh/s but there are no accepted shares.

any idea?

I tried a standard power brick and it seemed to do the trick, now the units that are on power bricks are hashing away and the ones on the molex adapters are sitting there showing 360kh/s with fans spinning, green LED blinking, and no shares being accepted

Running from molex rails does work. I have 10 on one rail and 7 on another PSU. With all those gpu/fan molex adapters we have lying around it does make for some simple connections

I use bfgminer on a windows box for now and sometimes you have to restart it a few times to get it to run them all.....so I switched to running them each in their own instance to their own worker on the pool

It is true that without the voltmod, best to just clock at 850, and that way you wont need the fans either

Ofenkaese

newbie

Activity: 43

Merit: 0

20 pieces boxed... ;-)
what have you done with your's?

Pistachio

legendary

Activity: 1456

Merit: 1000

Ofenkaese

newbie

Activity: 43

Merit: 0

Quote from: IchibahnSLC on March 20, 2014, 02:00:19 PM

Quote from: Ofenkaese on March 20, 2014, 07:17:47 AM

Running now for 16h without problems on RASPI.
Frequencies seem to be okay. Maybe I have to downsize it for two miners by one step. How do you think about 16 HW in 16 hours? Is this okay?

EDIT: Pool shows rates between 3400 and 3700 kh/s

How did you get the frequencies to differ? I can't get the command to work on mine for some reason.

Start Line

Code:

/home/pi/cgminer --config=/home/pi/cgminer.conf

(where pi is the user)

cgminer.conf

Code:

{
"pools" : [
{
"name" : "x",
"url" : "stratum tcp://x:7777",
"user" : "x",
"pass" : "x",
"pool-priority" : "x"
}
],
"api-allow" : "W:127.0.0.1,192.168.1/24",
"api-listen" : true,
"failover-only" : true,
"scrypt" : true,
"gridseed-options" : "baud=115200,freq=900,chips=5",
"gridseed-freq" : "6D7B20975455=875,6D93268C5455=888,6D96239E5455=863,6D9E177C5455=875,6D7820995455=875,6D94188B5455=888,6D7C11805455=875,8D8755784849=863,6D77216$
}

-droid-

legendary

Activity: 1050

Merit: 1001

Question:

I made my own PSU connectors for my units with the barrel adapters and it seems like they are not working right.

I had some molex adapters I had leftover from my GPU's with 1 yellow, black, red cable for each adapter. I snipped the red cable and ran the yellow into the + and black into the - on the barrel adapter.

after plugging each adapter into a molex cable from my PSU the units fan turns on the the green light flashes, CGMiner registers the speed of each miner at 360kh/s but there are no accepted shares.

any idea?

I tried a standard power brick and it seemed to do the trick, now the units that are on power bricks are hashing away and the ones on the molex adapters are sitting there showing 360kh/s with fans spinning, green LED blinking, and no shares being accepted

Topic: LightningAsic usb miners based Gridseed GC3355 Tech Support Thread - page 4. (Read 73415 times)