Topic: LightningAsic usb miners based Gridseed GC3355 Tech Support Thread - page 7. (Read 73478 times)
March 17, 2014, 10:44:04 PM
March 17, 2014, 07:35:02 PM
All right, the new frequency table is:
700, 706, 713, 719, 725, 731, 738, 744, 750, 756, 763, 769, 775, 781, 788, 794, 800, 813, 825, 838, 850, 863, 875, 888, 900, 913, 925, 938, 950, 963, 975, 988, 1000, 1013, 1025, 1038, 1050, 1063, 1075, 1088, 1100, 1113, 1125, 1138, 1150, 1163, 1175, 1188, 1200
700, 706, 713, 719, 725, 731, 738, 744, 750, 756, 763, 769, 775, 781, 788, 794, 800, 813, 825, 838, 850, 863, 875, 888, 900, 913, 925, 938, 950, 963, 975, 988, 1000, 1013, 1025, 1038, 1050, 1063, 1075, 1088, 1100, 1113, 1125, 1138, 1150, 1163, 1175, 1188, 1200
Would someone kindly provide me with a compiled version for the raspi? Even better would be a complete image... I grew up using dos and windows... but I'm not good @ linux :-/
+1 for a running raspi version
I just cloned, configured and compiled the version on my raspi but it won't work with scripta.
March 17, 2014, 07:12:33 PM
Any windows version of this modified cgminer? Just got my 10 units and am using bfgminer right now.
March 17, 2014, 07:03:50 PM
All right, the new frequency table is:
700, 706, 713, 719, 725, 731, 738, 744, 750, 756, 763, 769, 775, 781, 788, 794, 800, 813, 825, 838, 850, 863, 875, 888, 900, 913, 925, 938, 950, 963, 975, 988, 1000, 1013, 1025, 1038, 1050, 1063, 1075, 1088, 1100, 1113, 1125, 1138, 1150, 1163, 1175, 1188, 1200
700, 706, 713, 719, 725, 731, 738, 744, 750, 756, 763, 769, 775, 781, 788, 794, 800, 813, 825, 838, 850, 863, 875, 888, 900, 913, 925, 938, 950, 963, 975, 988, 1000, 1013, 1025, 1038, 1050, 1063, 1075, 1088, 1100, 1113, 1125, 1138, 1150, 1163, 1175, 1188, 1200
Would someone kindly provide me with a compiled version for the raspi? Even better would be a complete image... I grew up using dos and windows... but I'm not good @ linux :-/
Anyway. Some people were talking about the raspi version with scripta getting stuck over night. Even with the changed line someone supplied it crashed overnight. I found a donation cron job running every night for a short time. Just deleted that thing and the raspi works very fine now...
But would love to implement the latest frequency setup.
Best Regards
March 17, 2014, 06:34:09 PM
March 17, 2014, 06:25:41 PM
Can anyone tell me how to mine LTC only with the wiibox controller?? Not lightningasic..there is no information anywhere
March 17, 2014, 06:09:36 PM
All right, the new frequency table is:
700, 706, 713, 719, 725, 731, 738, 744, 750, 756, 763, 769, 775, 781, 788, 794, 800, 813, 825, 838, 850, 863, 875, 888, 900, 913, 925, 938, 950, 963, 975, 988, 1000, 1013, 1025, 1038, 1050, 1063, 1075, 1088, 1100, 1113, 1125, 1138, 1150, 1163, 1175, 1188, 1200
700, 706, 713, 719, 725, 731, 738, 744, 750, 756, 763, 769, 775, 781, 788, 794, 800, 813, 825, 838, 850, 863, 875, 888, 900, 913, 925, 938, 950, 963, 975, 988, 1000, 1013, 1025, 1038, 1050, 1063, 1075, 1088, 1100, 1113, 1125, 1138, 1150, 1163, 1175, 1188, 1200
March 17, 2014, 05:49:13 PM
Ah I know what the problem is.. I removed everything under 800Mhz since our units were fine over that. I'll put the 700..800Mhz range back an send you a PM when it's done.
Again, a day late and a buck short! You beat me to it!!!
March 17, 2014, 05:48:43 PM
Ah I know what the problem is.. I removed everything under 800Mhz since our units were fine over that. I'll put the 700..800Mhz range back an send you a PM when it's done.
March 17, 2014, 05:16:36 PM
March 17, 2014, 04:29:05 PM
March 17, 2014, 04:19:06 PM
If anyone interested I've modified Andareed's version of cgminer a bit to let you better finetune the gridseed units. There's a big variance in the resistors they used as voltage references so every unit has a different maximum frequency they can run at.
https://github.com/girnyau/cgminer-gc3355
New frequency table: 800, 813, 825, 838, 850, 863, 875, 888, 900, 913, 925, 938, 950, 963, 975, 988, 1000, 1013, 1025, 1038, 1050, 1063, 1075, 1088, 1100, 1113, 1125, 1138, 1150, 1163, 1175, 1188, 1200
You won't need the ghz ones however unless highly overvolted
You can also define a base frequency as usual, then set per device frequencies by the units' serial number if you want:
--gridseed-options freq=888 --gridseed-freq 8D74488A4949=900,8D96227B5449=900,8D7357785355=875
Factory units running since ~48 hours without any hw mods but the fans desoldered:
cgminer version 3.7.2 - Started: [2014-03-16 13:23:19]
--------------------------------------------------------------------------------
(5s):1.891M (avg):1.888Mh/s | A:3357360 R:4832 HW:228 WU:10.5/m
ST: 2 SS: 0 NB: 950 LW: 34253 GF: 2 RF: 0
Connected to litecoinpool.org diff 256 with stratum as user composeit.gridseed
Block: 3a0bf6f9... Diff:5.16K Started: [22:08:37] Best share: 18.8M
--------------------------------------------------------------------------------
*P*ool management *S*ettings *D*isplay options *Q*uit
GSD 0: 8D74488A4949 900 MHz | 382.0K/381.9Kh/s | A:653120 R:2176 HW:204
GSD 1: 8D7135A35355 888 MHz | 376.9K/376.8Kh/s | A:670592 R:1152 HW: 6
GSD 2: 8D96227B5449 900 MHz | 382.0K/381.9Kh/s | A:675936 R: 800 HW: 5
GSD 3: 6D9323805251 888 MHz | 376.9K/376.8Kh/s | A:677392 R: 352 HW: 3
GSD 4: 8D7357785355 875 MHz | 371.4K/371.3Kh/s | A:680320 R: 352 HW: 10
--------------------------------------------------------------------------------
Cheers
https://github.com/girnyau/cgminer-gc3355
New frequency table: 800, 813, 825, 838, 850, 863, 875, 888, 900, 913, 925, 938, 950, 963, 975, 988, 1000, 1013, 1025, 1038, 1050, 1063, 1075, 1088, 1100, 1113, 1125, 1138, 1150, 1163, 1175, 1188, 1200
You won't need the ghz ones however unless highly overvolted
You can also define a base frequency as usual, then set per device frequencies by the units' serial number if you want:
--gridseed-options freq=888 --gridseed-freq 8D74488A4949=900,8D96227B5449=900,8D7357785355=875
Factory units running since ~48 hours without any hw mods but the fans desoldered:
cgminer version 3.7.2 - Started: [2014-03-16 13:23:19]
--------------------------------------------------------------------------------
(5s):1.891M (avg):1.888Mh/s | A:3357360 R:4832 HW:228 WU:10.5/m
ST: 2 SS: 0 NB: 950 LW: 34253 GF: 2 RF: 0
Connected to litecoinpool.org diff 256 with stratum as user composeit.gridseed
Block: 3a0bf6f9... Diff:5.16K Started: [22:08:37] Best share: 18.8M
--------------------------------------------------------------------------------
*P*ool management *S*ettings *D*isplay options *Q*uit
GSD 0: 8D74488A4949 900 MHz | 382.0K/381.9Kh/s | A:653120 R:2176 HW:204
GSD 1: 8D7135A35355 888 MHz | 376.9K/376.8Kh/s | A:670592 R:1152 HW: 6
GSD 2: 8D96227B5449 900 MHz | 382.0K/381.9Kh/s | A:675936 R: 800 HW: 5
GSD 3: 6D9323805251 888 MHz | 376.9K/376.8Kh/s | A:677392 R: 352 HW: 3
GSD 4: 8D7357785355 875 MHz | 371.4K/371.3Kh/s | A:680320 R: 352 HW: 10
--------------------------------------------------------------------------------
Cheers
March 17, 2014, 03:58:17 PM
Strange. Did you have you hotplug setting set to 10 and wait 10-20 seconds for it to come back? It doesn't happen right away.
Also, the Gridseed miner will NOT disappear from device manager when disabled. It just shows as disabled (downward pointing arrow, I think).
You 5m cable could also be the problem, just replace it and try again. Easy to find out.
Also, the Gridseed miner will NOT disappear from device manager when disabled. It just shows as disabled (downward pointing arrow, I think).
You 5m cable could also be the problem, just replace it and try again. Easy to find out.
Update: ran again using hotplug 10, but still the same problem when it failed, had to physically replug the USB again.
I've switched back to a 1m USB cable (from 5m) and the bat file worked! No need to physically replug the USB this time. I'm hoping Gridseed will behave now its back to the short cable, but if not, at least I can RDP in and reset it remotely now.
Thanks volder!
March 17, 2014, 03:27:32 PM
Hi Quick q: Is v2.0.2.zip still the recommended firmware to use?
Where can I download this?
Edit: you mean the wiibox or LightningASIC firmware? Wiibox is up to 2.0.7, but it changes your SHH password after 2.0.3.
March 17, 2014, 02:10:31 PM
Hi Quick q: Is v2.0.2.zip still the recommended firmware to use?
March 17, 2014, 09:40:48 AM
Why is it reporting lower hashrate? It shows and accepts shares. Can't figure that out...
March 17, 2014, 03:04:59 AM
Hardware mod that allows stable higher frequencies: https://bitcointalksearch.org/topic/gridseed-5-chip-usb-miner-voltage-mod-519112
March 16, 2014, 10:45:28 PM
Another crash this morning. Even rebooting the PC didn't bring Gridseed back to life! Only physically unplugging and replugging the USB cable got it working again. 
I know you guys dont want to hear this but I have been going 48 hours straight with no issues,
PC running 50 instances of CPUminer, high end USB hubs (Orico type) with 50 Gridseed units.
March 16, 2014, 10:02:12 PM
I can't answer your question but am curious about your configuration. I cannot get my gridseed 5 chip to run either dual or single without it crashing the Pi within 30 minutes. I've tried various compiles and what knot but no luck. I'm also headless so I can't see if there are any console errors. It works perfect in windows but the noise is too much for me to leave running in my room. Any information on your setup would be great. I used to have the Pi connected to two hubs with antminers. Now I just have the Pi connected directly to the Gridseed. Still crashes.
Another forum member told me about this, but what I did was:
Download minepeon 0.2.4.6 the newest version, then image onto a SD CARD - ( figured this be the easiest, since it already has all the dependencies installed)
then download the already compiled version of BFGMiner, and move the bfgminer binary and replace it in /opt/minepeon/bin/ . Then either sudo nano the miner.conf file or go to the browser and type in your minepeon IP ADDRESS and edit the start config there, with:
Code:
#!/bin/bash
sleep 10
/usr/bin/screen -dmS miner sudo /opt/minepeon/bin/bfgminer --scrypt -S gridseed:all --set-device gridseed:clock=850 -c /opt/minepeon/etc/miner.conf
sleep 10
/usr/bin/screen -dmS miner sudo /opt/minepeon/bin/bfgminer --scrypt -S gridseed:all --set-device gridseed:clock=850 -c /opt/minepeon/etc/miner.conf
and you should be good to go
EDIT: check out this thread, step by step:
https://bitcointalk.org/index.php?topic=168174.3000;topicseen
Thanks I'll give it a go tomorrow. I already have the latest minepeon so it's a matter of getting everything else set up.
March 16, 2014, 06:05:34 PM
Strange. Did you have you hotplug setting set to 10 and wait 10-20 seconds for it to come back? It doesn't happen right away.
Also, the Gridseed miner will NOT disappear from device manager when disabled. It just shows as disabled (downward pointing arrow, I think).
You 5m cable could also be the problem, just replace it and try again. Easy to find out.
Also, the Gridseed miner will NOT disappear from device manager when disabled. It just shows as disabled (downward pointing arrow, I think).
You 5m cable could also be the problem, just replace it and try again. Easy to find out.
Update: ran again using hotplug 10, but still the same problem when it failed, had to physically replug the USB again.
I've switched back to a 1m USB cable (from 5m) and the bat file worked! No need to physically replug the USB this time. I'm hoping Gridseed will behave now its back to the short cable, but if not, at least I can RDP in and reset it remotely now.
Thanks volder! Jump to: