Linux mining distro for the Raspberry PI - MinePeon - page 73.

tombs

newbie

Activity: 17

Merit: 0

Quote from: TheXev on August 28, 2013, 04:00:37 AM

Did anyone get this working on Cubieboard or Cubieboard2? I read someone was testing it out, but they've been rather quiet.

that would be me. I have both boards, but keep getting side tracked. I have everything up and running, but haven't stopped my pi from mining to take a usb erupter away from that to test with.

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Quote from: yxzq on August 28, 2013, 08:44:14 AM

Quote from: ct1aic on August 28, 2013, 08:22:37 AM

Code:

Aug 27 15:45:55 minepeon systemd[1]: PID file /run/httpd/httpd.pid not readable (...t.

Thanks for your kind help and support, yxzq.

You're welcome :-)

I encountered a similar error and just confirmed that this adjustment is missing in v0.2.3
This is the solution:
https://gist.github.com/thgh/6330000#start-apache-on-boot

You might have to disable/stop httpd.service first.

I disabled and stopped httpd service, did the edit of the file, replaced root by http, confirmed that I did save the file opening it again, then i enabled and started the service. I had the same lack of data in the live graphics. Then I did a reboot of the RPI. After entering again @ the Main status page, I get same problem as seen in the print-screen I included this morning.

yxzq

newbie

Activity: 27

Merit: 0

Quote from: ct1aic on August 28, 2013, 08:22:37 AM

Code:

Aug 27 15:45:55 minepeon systemd[1]: PID file /run/httpd/httpd.pid not readable (...t.

Thanks for your kind help and support, yxzq.

You're welcome :-)

I encountered a similar error and just confirmed that this adjustment is missing in v0.2.3
This is the solution:
https://gist.github.com/thgh/6330000#start-apache-on-boot

You might have to disable/stop httpd.service first.

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Quote from: yxzq on August 28, 2013, 07:28:10 AM

First of all: for those who use early builds, read this:
https://gist.github.com/thgh/6364973

Quote from: ct1aic on August 27, 2013, 10:20:04 PM

But... to edit any pool, I have to delete it and make new pool entry... Sad

Is it because de Save pools button disappears?
Are there any fields marked red?

Sorry, I was distracted. Of course it works. As i change anything, appears a green 'Save' button and it saves the new values.

Quote from: yxzq on August 28, 2013, 07:28:10 AM

Quote from: ct1aic on August 27, 2013, 10:20:04 PM

Question: What is 'Enable Remote control' option for?

A new feature that we would like to build. It will upload the stats to a remote server, so you can check up on minepeon at anywhere anytime.
If that works out, the settings and restart stuff might also come available.

WOW! Great! Thanks.

Quote from: yxzq on August 28, 2013, 07:28:10 AM

Quote from: ct1aic on August 27, 2013, 10:20:04 PM

Also, on the RPI with newer Arch Linux and from time to time, the live graphics go down and stay @ 0 Hash/s for some time. Reloading doesn't fix it. The other RPI always show live graphics.

Looking at the screenshot, it seems like apache/httpd is down. When an error occurs while trying to refresh the status, the status is not updated but the title should become [OFF]. I should make this more clear in the interface. Because now it looks like everything is normal.
How long does this command take and what's the output?

Code:

sudo systemctl status httpd.service

I could not replicate the error I was getting this morning. The command gives me:

Code:

minepeon@minepeon ~ :( $ sudo systemctl status httpd.service
[sudo] password for minepeon:
httpd.service - Apache Web Server
   Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
   Active: active (running) since Tue 2013-08-27 15:46:00 BST; 22h ago
  Process: 174 ExecStart=/usr/bin/apachectl start (code=exited, status=0/SUCCESS)
 Main PID: 231 (httpd)
   CGroup: name=systemd:/system/httpd.service
           ââ  231 /usr/bin/httpd -k start
           ââ  233 /usr/bin/httpd -k start
           ââ 4056 /usr/bin/httpd -k start
           ââ 4677 /usr/bin/httpd -k start
           ââ 5960 /usr/bin/httpd -k start
           ââ11478 /usr/bin/httpd -k start
           ââ11832 /usr/bin/httpd -k start
           ââ11833 /usr/bin/httpd -k start
           ââ14190 /usr/bin/httpd -k start
           ââ15899 /usr/bin/httpd -k start
           ââ19257 /usr/bin/httpd -k start
           ââ20201 /usr/bin/httpd -k start

Aug 27 15:45:51 minepeon apachectl[174]: httpd: Could not reliably determine the ...me
Aug 27 15:45:55 minepeon systemd[1]: PID file /run/httpd/httpd.pid not readable (...t.
Aug 27 15:46:00 minepeon systemd[1]: Started Apache Web Server.
minepeon@minepeon ~ $

UPDATE: I could replicate the 'problem' with a refresh of main 'status' page. But trying the same command again, it gave me the same output as the one avove, with the addiction of the following line at the end of the GGroup list:

Code:

           ââ20400 /usr/bin/httpd -k start

Thanks for your kind help and support, yxzq.

Quote from: yxzq on August 28, 2013, 07:28:10 AM

Quote from: Grouver (BtcBalance) on August 28, 2013, 02:03:07 AM

Any chance there will be coming an new version of Minepeon this upcoming week?

Probably not.

yxzq

newbie

Activity: 27

Merit: 0

First of all: for those who use early builds, read this:
https://gist.github.com/thgh/6364973

Quote from: ct1aic on August 27, 2013, 10:20:04 PM

But... to edit any pool, I have to delete it and make new pool entry... Sad

Is it because de Save pools button disappears?
Are there any fields marked red?

Quote from: ct1aic on August 27, 2013, 10:20:04 PM

Question: What is 'Enable Remote control' option for?

A new feature that we would like to build. It will upload the stats to a remote server, so you can check up on minepeon at anywhere anytime.
If that works out, the settings and restart stuff might also come available.

Quote from: ct1aic on August 27, 2013, 10:20:04 PM

Also, on the RPI with newer Arch Linux and from time to time, the live graphics go down and stay @ 0 Hash/s for some time. Reloading doesn't fix it. The other RPI always show live graphics.

Looking at the screenshot, it seems like apache/httpd is down. When an error occurs while trying to refresh the status, the status is not updated but the title should become [OFF]. I should make this more clear in the interface. Because now it looks like everything is normal.
How long does this command take and what's the output?

Code:

sudo systemctl status httpd.service

Quote from: Grouver (BtcBalance) on August 28, 2013, 02:03:07 AM

Any chance there will be coming an new version of Minepeon this upcoming week?

Probably not.

TheXev

member

Activity: 79

Merit: 10

Did anyone get this working on Cubieboard or Cubieboard2? I read someone was testing it out, but they've been rather quiet.

easynote

hero member

Activity: 700

Merit: 500

CryptoTalk.Org - Get Paid for every Post!

I update the http, i see my pools, everything ok... But in "miner" I cant see my list of pool and if I add one dont do anything

stellan0r

hero member

Activity: 574

Merit: 500

Medical Translations for Bitcoins

Quote from: klotzenhotz on August 28, 2013, 02:23:19 AM

Hey, is there a way to use a wifi-connection? If so, how to configure the access point and wpa-keys? Which wifi-dongle is supposed to work with the rpi?

http://www.amazon.de/EDIMAX-EW-7811UN-Wireless-Adapter-IEEE802-11b/dp/B003MTTJOY/

this works perfectly out of the box. plug it in,

enter "sudo wicd-curses" in the console

and setup everything as needed. you need to be on wired lan/debugging cable though to setup wifi Wink

like here: https://forums.butterflylabs.com/showwiki.php?title=Tutorials:Raspberry+Pi+-+Mining+with+MinePeon&viewfull=1&page=4&do=comments#post38317

klotzenhotz

sr. member

Activity: 252

Merit: 250

Hey, is there a way to use a wifi-connection? If so, how to configure the access point and wpa-keys? Which wifi-dongle is supposed to work with the rpi?

Grouver (BtcBalance)

hero member

Activity: 530

Merit: 500

Any chance there will be coming an new version of Minepeon this upcoming week?
Just checking before I throw my current old version away and upgrade to version 0.2.3

Thanks.

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Quote from: yxzq on August 27, 2013, 04:40:07 PM

Quote from: ct1aic on August 27, 2013, 02:02:21 PM

I still can see my Pools @ main page, but @ Miner page, the Pool only has empty. I still can't modify my pools.

Thanks for bug testing :-)

I am now making a button that fixes the problem. Should be working by tonight.

With last git pull, I get now miner and RPI uptime:

Miner 13h 31m 38s - Pi 13h 31m 17s - Temp 36.856 °C
Miner 8h 40m 16s - Pi 32h 51m 31s - Temp 36.856 °C

The Compatibility Reload button worked ok and I now can see my pools @ Miner screen. And no more warning messages when going to Main page. Many thanks, yxqz. But... to edit any pool, I have to delete it and make new pool entry... Sad

Temp of both RPI are exactly the same? Odd...

Question: What is 'Enable Remote control' option for?

Also, on the RPI with newer Arch Linux and from time to time, the live graphics go down and stay @ 0 Hash/s for some time. Reloading doesn't fix it. The other RPI always show live graphics.

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Quote from: yxzq on August 27, 2013, 07:11:05 PM

Who would like to show off his/her rig + screenshots of web interface + allow it to publish it on the wiki (minepeon.com)
(v0.2.3 or github)

Me...

BG4

legendary

Activity: 1006

Merit: 1024

PaperSafe

Quote from: yxzq on August 27, 2013, 04:40:07 PM

Quote from: ct1aic on August 27, 2013, 02:02:21 PM

I still can see my Pools @ main page, but @ Miner page, the Pool only has empty. I still can't modify my pools.

Thanks for bug testing :-)

I am now making a button that fixes the problem. Should be working by tonight.

Should version 0.2.3a be down loaded or get pulls from 0.2.3 .....because get pulls from 0.2.3 for the web interface just wrecked.....cgminer is still up and running, but the web interface can not connect to the API anymore. It says miner is down and the screen is really light and I can not do anything....pressing restart miner does nothing....

I guess my only fix...REBOOT..

EDIT...NO luck......Web interface will not reboot miner now.....CGminer in SSH had no pools. I had to manually type them into CG to start the miner....

EDIT...It took a few minutes ...I had to restart CG from SSH ...then Web interface started.....
It seems that there are 3 differant web interfaces ...and are merged into one....you have to press the correct combinations of buttons to
get to or out of the one you want.....http://192.168.15.3/old/pools.php http://192.168.15.3/old/settings.php http://192.168.15.3/old/advanced.html

Also ..Is LCD system suppose to auto-start too???

PS...Please find a was to keep Highest share found and the Block associtated with..I would like to tread highest blocks of the day on a graph
The donation restart stops me from doing this...

Its looking better and better.....Keep rolling guys

PS...MI miner has been up for 3 weeks now...unless I shut it down or reboot it...Rock Stable..IMO

yxzq

newbie

Activity: 27

Merit: 0

Who would like to show off his/her rig + screenshots of web interface + allow it to publish it on the wiki (minepeon.com)
(v0.2.3 or github)

yxzq

newbie

Activity: 27

Merit: 0

Quote from: ct1aic on August 27, 2013, 02:02:21 PM

I still can see my Pools @ main page, but @ Miner page, the Pool only has empty. I still can't modify my pools.

Thanks for bug testing :-)

I am now making a button that fixes the problem. Should be working by tonight.

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Quote from: ct1aic on August 27, 2013, 01:45:53 PM

One more intersting thing: I restarted my 2 RPI's more or less 23 hours ago, with same MinePeon, cgminer, but distinct Arch Linux.

RPI 1 - version A (2011), 256 MBytes RAM, 13 USB Block erupters, [Linux minepeon 3.6.11-17-ARCH+ armv6l] - Uptime 4h 58s 32s

RPI 2 - version B (2012), 512 MBytes RAM, 12 USB Block erupters, [Linux minepeon 3.6.11-15-ARCH+ armv6l] - Uptime 23h 13s 0s

With the newer Arch Linux version, RPI 1 restarted at least 1 time. RPI 2, with older Arch Linux version, didn't restarted.

Done another git pull of minepeon&http and now the Uptime is in the correct format h m s and not h s s and the live graphis are working.

I get now the following errors @ Main Page:

Pools config not found
Miners option not found

I still can see my Pools @ main page, but @ Miner page, the Pool only has empty. I still can't modify my pools.

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

One more intersting thing: I restarted my 2 RPI's more or less 23 hours ago, with same MinePeon, cgminer, but distinct Arch Linux.

RPI 1 - version A (2011), 256 MBytes RAM, 13 USB Block erupters, [Linux minepeon 3.6.11-17-ARCH+ armv6l] - Uptime 4h 58s 32s

RPI 2 - version B (2012), 512 MBytes RAM, 12 USB Block erupters, [Linux minepeon 3.6.11-15-ARCH+ armv6l] - Uptime 23h 13s 0s

With the newer Arch Linux version, RPI 1 restarted at least 1 time. RPI 2, with older Arch Linux version, didn't restarted.

chanberg

hero member

Activity: 672

Merit: 500

I am running 0.2.3a, and ive noticed that although the screen says "connecting to cgminer" every hour or so, it does not actually disconnect. It just says connecting. Because i am logged in though ssh, and I see the cgminer screen which is hashing away fine. When the LCD says 0.00mhs, its also hashing away fine..

atariguy

full member

Activity: 364

Merit: 100

OK, I'm using version 0.2.2. My current uptime is 10 days 9 hours 59 minutes 17 seconds. I just got the Adafruit LCD kit. I understand this works with newer versions of Minepeon? What is the best one to use?

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

HELP...

With last updates, I do get the graphics, but I can't access the pools...

Topic: Linux mining distro for the Raspberry PI - MinePeon - page 73. (Read 685140 times)