Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 24. (Read 156032 times)

Quote from: mrbugera2 on July 27, 2021, 09:39:36 AM

guys third gpu shows 0, any ideas? thanks

That is GPU 0 that is showing 0.00 hash.
Probably need to watch miner output when it starts to see error message why its not hashing.

Is gpu0 a 4gb rx580? Also is your driver anywhere near current?

Windows uses some of the memory of the first video card for some reason (linux does not suffer this).

Post up what the miner is showing when spinning up and any error message it is showing about gpu0.
Also your command line.

1) no its 8gb
2) driver is crimson beta old version (but it worked 1 week ago with no problems)
3) miner stil works with no error message
4) command line? can you explain what this means and how to post it

p.s i have updated to new driver but still the same.. and then downgraded again

thanks for your reply

Did you try and Linux OS, like MMPOS or HiveOS?

jgonzi

member

Activity: 639

Merit: 19

Quote from: miner29 on July 28, 2021, 01:15:44 PM

Quote from: mrbugera2 on July 28, 2021, 09:13:55 AM

Quote from: mrbugera2 on July 27, 2021, 09:39:36 AM

guys third gpu shows 0, any ideas? thanks

That is GPU 0 that is showing 0.00 hash.
Probably need to watch miner output when it starts to see error message why its not hashing.

Is gpu0 a 4gb rx580? Also is your driver anywhere near current?

Windows uses some of the memory of the first video card for some reason (linux does not suffer this).

Post up what the miner is showing when spinning up and any error message it is showing about gpu0.
Also your command line.

1) no its 8gb
2) driver is crimson beta old version (but it worked 1 week ago with no problems)
3) miner stil works with no error message
4) command line? can you explain what this means and how to post it

p.s i have updated to new driver but still the same.. and then downgraded again

thanks for your reply

Command line means the actual text that is executing the miner.

Have you tried swapping gpu2 with gpu0? If the problem moves with the gpu then its something with gpu. If the problem remains on the gpu0 slot then its not the gpu. Take one step at a time trying to eliminate items.

The other advise i would recommend is to try a linux mining os that can handle both types of cards and runs off a memory stick (so you can easily switch back to windows by removing memstick). I know mmpos can do this and beleive hiveOS can also if not there are several. But get one and try after trying above. Something is messed up just gotta isolate down to the culprit.

Completely agree... Linux mining will help you in this configs too

miner29

full member

Activity: 1282

Merit: 141

Quote from: mrbugera2 on July 28, 2021, 09:13:55 AM

Quote from: mrbugera2 on July 27, 2021, 09:39:36 AM

guys third gpu shows 0, any ideas? thanks

That is GPU 0 that is showing 0.00 hash.
Probably need to watch miner output when it starts to see error message why its not hashing.

Is gpu0 a 4gb rx580? Also is your driver anywhere near current?

Windows uses some of the memory of the first video card for some reason (linux does not suffer this).

Post up what the miner is showing when spinning up and any error message it is showing about gpu0.
Also your command line.

1) no its 8gb
2) driver is crimson beta old version (but it worked 1 week ago with no problems)
3) miner stil works with no error message
4) command line? can you explain what this means and how to post it

p.s i have updated to new driver but still the same.. and then downgraded again

thanks for your reply

Command line means the actual text that is executing the miner.

Have you tried swapping gpu2 with gpu0? If the problem moves with the gpu then its something with gpu. If the problem remains on the gpu0 slot then its not the gpu. Take one step at a time trying to eliminate items.

The other advise i would recommend is to try a linux mining os that can handle both types of cards and runs off a memory stick (so you can easily switch back to windows by removing memstick). I know mmpos can do this and beleive hiveOS can also if not there are several. But get one and try after trying above. Something is messed up just gotta isolate down to the culprit.

mrbugera2

jr. member

Activity: 85

Merit: 2

Quote from: mrbugera2 on July 27, 2021, 09:39:36 AM

guys third gpu shows 0, any ideas? thanks

That is GPU 0 that is showing 0.00 hash.
Probably need to watch miner output when it starts to see error message why its not hashing.

Is gpu0 a 4gb rx580? Also is your driver anywhere near current?

Windows uses some of the memory of the first video card for some reason (linux does not suffer this).

Post up what the miner is showing when spinning up and any error message it is showing about gpu0.
Also your command line.

1) no its 8gb
2) driver is crimson beta old version (but it worked 1 week ago with no problems)
3) miner stil works with no error message
4) command line? can you explain what this means and how to post it

p.s i have updated to new driver but still the same.. and then downgraded again

thanks for your reply

miner29

full member

Activity: 1282

Merit: 141

Quote from: mrbugera2 on July 27, 2021, 09:39:36 AM

guys third gpu shows 0, any ideas? thanks

That is GPU 0 that is showing 0.00 hash.
Probably need to watch miner output when it starts to see error message why its not hashing.

Is gpu0 a 4gb rx580? Also is your driver anywhere near current?

Windows uses some of the memory of the first video card for some reason (linux does not suffer this).

Post up what the miner is showing when spinning up and any error message it is showing about gpu0.
Also your command line.

mrbugera2

jr. member

Activity: 85

Merit: 2

guys third gpu shows 0, any ideas? thanks

dedizonesv2

jr. member

Activity: 152

Merit: 3

Quote from: jgonzi on July 26, 2021, 07:20:35 AM

Quote from: dedizonesv2 on July 22, 2021, 10:03:30 AM

Quote

Are you testing with 3060 rigs? Only for the driver choose Smiley Curiosity

No, i have only 3060Ti, 3070 and 3080 ^_^ sorry

Really nice rigs... I found that lastest drivers are better in case a Riser fail... What I found is that, lastest drivers can ommit better waiting for the riser information. at least in old rigs where the risers are not in best situation...

well I have last generation risers with 8 capacitor + the small coil above 150 (often 100).
I find that I have better performance with the nvidia 460.39 drivers

I redid the tests, I really have a bad hashrate / share / watt with lolminer, I consume more for less sharing

jgonzi

member

Activity: 639

Merit: 19

Quote from: dedizonesv2 on July 22, 2021, 10:03:30 AM

Quote

Are you testing with 3060 rigs? Only for the driver choose Smiley Curiosity

No, i have only 3060Ti, 3070 and 3080 ^_^ sorry

Really nice rigs... I found that lastest drivers are better in case a Riser fail... What I found is that, lastest drivers can ommit better waiting for the riser information. at least in old rigs where the risers are not in best situation...

dedizonesv2

jr. member

Activity: 152

Merit: 3

Quote

Are you testing with 3060 rigs? Only for the driver choose Smiley Curiosity

No, i have only 3060Ti, 3070 and 3080 ^_^ sorry

jgonzi

member

Activity: 639

Merit: 19

Quote from: dedizonesv2 on July 21, 2021, 04:34:20 PM

Quote from: jgonzi on July 20, 2021, 04:00:11 PM

Quote from: dedizonesv2 on July 19, 2021, 02:05:52 AM

Quote from: dedizonesv2 on July 18, 2021, 01:08:36 PM

Quote from: jgonzi on July 20, 2021, 04:00:11 PM

Testing Silicion Lottery...

3080 : 96Mhs at 201W with Memory Temp 78C

Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet)

I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized

How can consume more watts?? are you using Fixed Core or Power Limit? It hasn't been any update in ETHASH only for the 3060...

Yes i try 24H and lolminer more +-100w

Exemple: lolminer 3827w, other miner 3780w
Lolminer: 4014W
Today add cards other miner: 3914W

i verified on the wall + linky (an electricity company meter)

it is not a big consumption either but just sometimes a little tour in the code to optimize it

:*

i use locked core in hiveos

Really interesting... in my case comparative with CUDA 1.31 for example in 3070 and 3080 are 2-3W less with some others miners.... It is true, I use low Core with low Memory and I can reduce Watts and stress lot less the GPUs.. About the new card is nearly I lolMiner 190W and 134W in the other miner... I think that's to much difference?

I rollback driver nvidia last version to 460.39 and I will redo the test between lolminer and another that I use

Are you testing with 3060 rigs? Only for the driver choose

Curiosity

dedizonesv2

jr. member

Activity: 152

Merit: 3

Quote from: dedizonesv2 on July 19, 2021, 02:05:52 AM

Quote from: dedizonesv2 on July 18, 2021, 01:08:36 PM

Quote from: dedizonesv2 on July 19, 2021, 02:05:52 AM

Testing Silicion Lottery...

3080 : 96Mhs at 201W with Memory Temp 78C

Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet)

I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized

How can consume more watts?? are you using Fixed Core or Power Limit? It hasn't been any update in ETHASH only for the 3060...

Yes i try 24H and lolminer more +-100w

Exemple: lolminer 3827w, other miner 3780w
Lolminer: 4014W
Today add cards other miner: 3914W

i verified on the wall + linky (an electricity company meter)

it is not a big consumption either but just sometimes a little tour in the code to optimize it

:*

i use locked core in hiveos

Really interesting... in my case comparative with CUDA 1.31 for example in 3070 and 3080 are 2-3W less with some others miners.... It is true, I use low Core with low Memory and I can reduce Watts and stress lot less the GPUs.. About the new card is nearly I lolMiner 190W and 134W in the other miner... I think that's to much difference?

I rollback driver nvidia last version to 460.39 and I will redo the test between lolminer and another that I use

jgonzi

member

Activity: 639

Merit: 19

Quote from: dedizonesv2 on July 18, 2021, 01:08:36 PM

Testing Silicion Lottery...

3080 : 96Mhs at 201W with Memory Temp 78C

Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet)

I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized

How can consume more watts?? are you using Fixed Core or Power Limit? It hasn't been any update in ETHASH only for the 3060...

Yes i try 24H and lolminer more +-100w

Exemple: lolminer 3827w, other miner 3780w
Lolminer: 4014W
Today add cards other miner: 3914W

i verified on the wall + linky (an electricity company meter)

it is not a big consumption either but just sometimes a little tour in the code to optimize it

:*

i use locked core in hiveos

Really interesting... in my case comparative with CUDA 1.31 for example in 3070 and 3080 are 2-3W less with some others miners.... It is true, I use low Core with low Memory and I can reduce Watts and stress lot less the GPUs.. About the new card is nearly I lolMiner 190W and 134W in the other miner... I think that's to much difference?

dedizonesv2

jr. member

Activity: 152

Merit: 3

Quote from: dedizonesv2 on July 18, 2021, 01:08:36 PM

Quote from: dedizonesv2 on July 18, 2021, 01:08:36 PM

Testing Silicion Lottery...

3080 : 96Mhs at 201W with Memory Temp 78C

Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet)

I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized

How can consume more watts?? are you using Fixed Core or Power Limit? It hasn't been any update in ETHASH only for the 3060...

Yes i try 24H and lolminer more +-100w

Exemple: lolminer 3827w, other miner 3780w
Lolminer: 4014W
Today add cards other miner: 3914W

i verified on the wall + linky (an electricity company meter)

it is not a big consumption either but just sometimes a little tour in the code to optimize it

:*

i use locked core in hiveos

jgonzi

member

Activity: 639

Merit: 19

Testing Silicion Lottery...

3080 : 96Mhs at 201W with Memory Temp 78C

Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet)

I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized

How can consume more watts?? are you using Fixed Core or Power Limit? It hasn't been any update in ETHASH only for the 3060...

dedizonesv2

jr. member

Activity: 152

Merit: 3