Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 31. (Read 155976 times)
can you mine pirate coin if so how , would be great cheers.
De 2 GPU you are trying to use to mine aren't for mining. This is way is not working...
I thought any AMD or NVIDIA card can be used
At least so i read somewhere. I have two questions. One of them, i think i have my answer but I am going to ask anyway for troubleshooting purposes.
1. I get an error and dont know how or why. I dont even have an idea on what to try to fix it.
2. I have 2x 4gb video cards. The site says “ Minimum VRAM requirement: 6GB”
Somy question is, do i have 2 x 4gb or do i have 8gb vid? Because if its 2x4 then that means i need to be using the one that says minimum 3gb
*sorry for #2. N00b here*
Also, more info that you probably dont need, but i might as well tell.
After soo much unsuccessful tries, i was told to try out NICEHASH. Which i did. It failed there. But then i disabled BeamV3 and KAWPAW, then enabled ZHash, and that worked on there. But thats mBTC. I dont want that ish!!!!
But why is it sort of working there and not working here.
Any assistance is appreciated. Thanks.
1. I get an error and dont know how or why. I dont even have an idea on what to try to fix it.
2. I have 2x 4gb video cards. The site says “ Minimum VRAM requirement: 6GB”
Somy question is, do i have 2 x 4gb or do i have 8gb vid? Because if its 2x4 then that means i need to be using the one that says minimum 3gb
*sorry for #2. N00b here*
Also, more info that you probably dont need, but i might as well tell.
After soo much unsuccessful tries, i was told to try out NICEHASH. Which i did. It failed there. But then i disabled BeamV3 and KAWPAW, then enabled ZHash, and that worked on there. But thats mBTC. I dont want that ish!!!!
But why is it sort of working there and not working here.
Any assistance is appreciated. Thanks.
De 2 GPU you are trying to use to mine aren't for mining. This is way is not working...
I have two questions. One of them, i think i have my answer but I am going to ask anyway for troubleshooting purposes.
1. I get an error and dont know how or why. I dont even have an idea on what to try to fix it.
https://share.icloud.com/photos/0-JrDXjJo96cjFxRuiaHky9Pg
2. I have 2x 4gb video cards. The site says “ Minimum VRAM requirement: 6GB”
Somy question is, do i have 2 x 4gb or do i have 8gb vid? Because if its 2x4 then that means i need to be using the one that says minimum 3gb
*sorry for #2. N00b here*
Also, more info that you probably dont need, but i might as well tell.
After soo much unsuccessful tries, i was told to try out NICEHASH. Which i did. It failed there. But then i disabled BeamV3 and KAWPAW, then enabled ZHash, and that worked on there. But thats mBTC. I dont want that ish!!!!
But why is it sort of working there and not working here.
https://share.icloud.com/photos/01x_QjlTiMLeUFS6oIc3UaqAw#Houston_-_Westchase
Any assistance is appreciated. Thanks.
1. I get an error and dont know how or why. I dont even have an idea on what to try to fix it.
https://share.icloud.com/photos/0-JrDXjJo96cjFxRuiaHky9Pg
2. I have 2x 4gb video cards. The site says “ Minimum VRAM requirement: 6GB”
Somy question is, do i have 2 x 4gb or do i have 8gb vid? Because if its 2x4 then that means i need to be using the one that says minimum 3gb
*sorry for #2. N00b here*
Also, more info that you probably dont need, but i might as well tell.
After soo much unsuccessful tries, i was told to try out NICEHASH. Which i did. It failed there. But then i disabled BeamV3 and KAWPAW, then enabled ZHash, and that worked on there. But thats mBTC. I dont want that ish!!!!
But why is it sort of working there and not working here.
https://share.icloud.com/photos/01x_QjlTiMLeUFS6oIc3UaqAw#Houston_-_Westchase
Any assistance is appreciated. Thanks.
So nothing has changed with 1.28a under Windows. It runs 5mins or only 30seconds and than the whole windows crash. No entry inside Miner logfile.
The windows logs give me these data:
Kernel Power
The windows logs give me these data:
Code:
Der Computer wurde nach einem schwerwiegenden Fehler neu gestartet. Der Fehlercode war: 0x000000ea (0xffffc10850b8d800, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). Ein volles Abbild wurde gespeichert in: C:\Windows\MEMORY.DMP. Berichts-ID: a722f4a1-3de2-416b-b552-d509a238dbeb.
Kernel Power
Code:
Das System wurde neu gestartet, ohne dass es zuvor ordnungsgemäß heruntergefahren wurde. Dieser Fehler kann auftreten, wenn das System nicht mehr reagiert hat oder abgestürzt ist oder die Stromzufuhr unerwartet unterbrochen wurde.
That is not a Miner problem... that seems to be problem with the driver. You could try to make a full DDU of drivers and install the lastest drivers or better try a Linux OS like MMPOS or HiveOS... They are free .
So nothing has changed with 1.28a under Windows. It runs 5mins or only 30seconds and than the whole windows crash. No entry inside Miner logfile.
The windows logs give me these data:
Kernel Power
The windows logs give me these data:
Code:
Der Computer wurde nach einem schwerwiegenden Fehler neu gestartet. Der Fehlercode war: 0x000000ea (0xffffc10850b8d800, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). Ein volles Abbild wurde gespeichert in: C:\Windows\MEMORY.DMP. Berichts-ID: a722f4a1-3de2-416b-b552-d509a238dbeb.
Kernel Power
Code:
Das System wurde neu gestartet, ohne dass es zuvor ordnungsgemäß heruntergefahren wurde. Dieser Fehler kann auftreten, wenn das System nicht mehr reagiert hat oder abgestürzt ist oder die Stromzufuhr unerwartet unterbrochen wurde.
My loop doesn't seem to be working, recently updated from 1.21 to 1.26. Is anyone experiencing similar issues. I'm using windows and only have two vega 64 cards mining beam, at most it runs for 12 hours. In the logs there are no errors and it just ends, no crash.
randomly ends.
Last log entry:
GPU 0: Found a share of difficulty 0.8k
New job received: 56 Difficulty: 512
randomly ends.
Last log entry:
GPU 0: Found a share of difficulty 0.8k
New job received: 56 Difficulty: 512
Can you try to run the last version 1.28a
For the loop you can try:
:loop
lolminer.exe --algo ....
timeout 10
goto loop
That will make a pause of 10s to try to recover the driver and later rerun lolminer that should help to in case it crash it re runs the miner.
ok will give it a try.
My loop doesn't seem to be working, recently updated from 1.21 to 1.26. Is anyone experiencing similar issues. I'm using windows and only have two vega 64 cards mining beam, at most it runs for 12 hours. In the logs there are no errors and it just ends, no crash.
randomly ends.
Last log entry:
GPU 0: Found a share of difficulty 0.8k
New job received: 56 Difficulty: 512
randomly ends.
Last log entry:
GPU 0: Found a share of difficulty 0.8k
New job received: 56 Difficulty: 512
Can you try to run the last version 1.28a
For the loop you can try:
:loop
lolminer.exe --algo ....
timeout 10
goto loop
That will make a pause of 10s to try to recover the driver and later rerun lolminer that should help to in case it crash it re runs the miner.
My loop doesn't seem to be working, recently updated from 1.21 to 1.26. Is anyone experiencing similar issues. I'm using windows and only have two vega 64 cards mining beam, at most it runs for 12 hours. In the logs there are no errors and it just ends, no crash.
randomly ends.
Last log entry:
GPU 0: Found a share of difficulty 0.8k
New job received: 56 Difficulty: 512
randomly ends.
Last log entry:
GPU 0: Found a share of difficulty 0.8k
New job received: 56 Difficulty: 512
New lolMiner 1.27
https://github.com/Lolliedieb/lolMiner-releases/releases
It seems Windows version is not yet
https://github.com/Lolliedieb/lolMiner-releases/releases
It seems Windows version is not yet
Also no info about the crashes with AMD 480 cards under Windows.
Which crashes can you put screens? Normally crashes are: OC,Undervolt, Driver Crash, PSU, Riser or Miner. Can you put more information to try to see where it could be the problem?.
Are you also having a loop in the miner in case is driver crash, automaticly continues mining?.
There is a bug ticket on Github. This happens to BEAM and Aeternity. I have no loop activated, it often crash the whole windows system so that it restart automatically.
https://github.com/Lolliedieb/lolMiner-releases/issues/434
New lolMiner 1.27
https://github.com/Lolliedieb/lolMiner-releases/releases
It seems Windows version is not yet
https://github.com/Lolliedieb/lolMiner-releases/releases
It seems Windows version is not yet
Also no info about the crashes with AMD 480 cards under Windows.
Which crashes can you put screens? Normally crashes are: OC,Undervolt, Driver Crash, PSU, Riser or Miner. Can you put more information to try to see where it could be the problem?.
Are you also having a loop in the miner in case is driver crash, automaticly continues mining?.
New lolMiner 1.27
https://github.com/Lolliedieb/lolMiner-releases/releases
It seems Windows version is not yet
https://github.com/Lolliedieb/lolMiner-releases/releases
It seems Windows version is not yet
Also no info about the crashes with AMD 480 cards under Windows.
New lolMiner 1.27
https://github.com/Lolliedieb/lolMiner-releases/releases
It seems Windows version is not yet
https://github.com/Lolliedieb/lolMiner-releases/releases
It seems Windows version is not yet
It is a really interesting information how to reduce the Watts for Nvidia cards in different OS
https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-by-OS-(English)
https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-by-OS-(English)
hello Lolliedieb
wave to all o7
Small question: miner it support to mine Zen aka Horizen coin ? if yes what it will be value to use on ALGO and PERSONALIZATION section ?
I was try to mine on zen.suprnova.cc and noo success
thx in advance
wave to all o7
Small question: miner it support to mine Zen aka Horizen coin ? if yes what it will be value to use on ALGO and PERSONALIZATION section ?
I was try to mine on zen.suprnova.cc and noo success
thx in advance
ZEN it can be mined by some GPU, but is really focused on ASIC, like the coin Piratechain and Komodo
Soo in translation Zen it can't be mine anymore by 1k GPU series ?! bummer so i was a idiot i stop 2 year agow /o\, that means i better hold amount what i have coz it will my be rise in price
p.s. now i am laffing hard when i remeber dev (ZEN) they say on beginning they want to be friendly on gpu algorithm and now they become ASIC oriented
thx for clarification
We have to think that some years ago, it was still possible to mine with and HD7970 BTC :-)
hello Lolliedieb
wave to all o7
Small question: miner it support to mine Zen aka Horizen coin ? if yes what it will be value to use on ALGO and PERSONALIZATION section ?
I was try to mine on zen.suprnova.cc and noo success
thx in advance
wave to all o7
Small question: miner it support to mine Zen aka Horizen coin ? if yes what it will be value to use on ALGO and PERSONALIZATION section ?
I was try to mine on zen.suprnova.cc and noo success
thx in advance
ZEN it can be mined by some GPU, but is really focused on ASIC, like the coin Piratechain and Komodo
Soo in translation Zen it can't be mine anymore by 1k GPU series ?! bummer so i was a idiot i stop 2 year agow /o\, that means i better hold amount what i have coz it will my be rise in price
p.s. now i am laffing hard when i remeber dev (ZEN) they say on beginning they want to be friendly on gpu algorithm and now they become ASIC oriented
thx for clarification
hello Lolliedieb
wave to all o7
Small question: miner it support to mine Zen aka Horizen coin ? if yes what it will be value to use on ALGO and PERSONALIZATION section ?
I was try to mine on zen.suprnova.cc and noo success
thx in advance
wave to all o7
Small question: miner it support to mine Zen aka Horizen coin ? if yes what it will be value to use on ALGO and PERSONALIZATION section ?
I was try to mine on zen.suprnova.cc and noo success
thx in advance
ZEN it can be mined by some GPU, but is really focused on ASIC, like the coin Piratechain and Komodo
Any chance that lolminer will add support for kawpow algo in the near future?
JimS2321
JimS2321
there is a way to avoid afterburner and using Nvidia inspector or better with internal command of LOlminer to fix voltages fr windows ?
I love the way that Lolminer handle the dualmining but with afterburner doesn't seem to be stable
I love the way that Lolminer handle the dualmining but with afterburner doesn't seem to be stable
the best way is like he said in the wiki:
https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-(English)
Manually: That will work for Linux and Windows 10 nvidia-smi -i $GPU -lgc $VALUE
You have to look at your windows where is the nvidia-smi command, you need to run it as Administrator
hello Lolliedieb
wave to all o7
Small question: miner it support to mine Zen aka Horizen coin ? if yes what it will be value to use on ALGO and PERSONALIZATION section ?
I was try to mine on zen.suprnova.cc and noo success
thx in advance
wave to all o7
Small question: miner it support to mine Zen aka Horizen coin ? if yes what it will be value to use on ALGO and PERSONALIZATION section ?
I was try to mine on zen.suprnova.cc and noo success
thx in advance
Jump to: