lolMiner 1.64: Fastest Kaspa miner in market - page 36.

jgonzi

member

Activity: 639

Merit: 19

Quote from: dimidimi on March 21, 2021, 07:25:59 AM

Please check these
I updated my rig of two rx480 xfx to mine eth using hiveos
Both into x16 slots

Z170 A pro Motherboard
1card 28mh
2card 7mh
Cpu intel 7500
8gb ram

Hash rates went up nicely compared to windows but i wonder if its possible to make them run both
How do i configure lanes property.
I can't make second Pci to run at good rate, swapped the cards which proved its not gpu issue

Did you add a 4g-alloc-size parameters?

batsonxl

member

Activity: 1196

Merit: 26

Can someone share rx470-570 4G Beam mining hashrates and oc settings?i mean get maximum hashrate that possible. Thanks

dimidimi

newbie

Activity: 5

Merit: 0

Please check these
I updated my rig of two rx480 xfx to mine eth using hiveos
Both into x16 slots

Z170 A pro Motherboard
1card 28mh
2card 7mh
Cpu intel 7500
8gb ram

Hash rates went up nicely compared to windows but i wonder if its possible to make them run both
How do i configure lanes property.
I can't make second Pci to run at good rate, swapped the cards which proved its not gpu issue

jgonzi

member

Activity: 639

Merit: 19

Quote from: KingsGroup.IT on March 17, 2021, 09:41:08 AM

Quote from: SCF0 on March 16, 2021, 05:50:26 PM

Quote from: KingsGroup.IT on March 16, 2021, 05:21:46 PM

does anyone understand how nicehash does it?
os = Win 10 x64

Can you post the commandline you use? (exclude the wallet address for privacy) And did you look at the output with the --list-devices option?

@echo off

setlocal enableDelayedExpansion

Rem #################################
Rem ## Begin of user-editable part ##
Rem #################################

set "POOL=btg.2miners.com:4040"
set "WALLET=xxxxxxxxxxxxxxxxxxx.workerName"
set "ALGO=EQUI144_5"
set "PERSONALIZATION=BgoldPoW"

Rem #################################
Rem ## End of user-editable part ##
Rem #################################

lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
pause

Did you solve it?

jgonzi

member

Activity: 639

Merit: 19

Quote from: SCF0 on March 18, 2021, 01:57:32 PM

Quote from: jgonzi on March 17, 2021, 04:51:56 PM

I always recommend

:loop
lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
timeout 10
goto loop

This won't help KingsGroup.IT though but it is an improvement if you want to keep the miner up after crashes.

KingsGroup.IT, can you post the output of lolMiner.exe --list-devices? I still suspect it's somehow not using both GPUs properly. Also you mentioned Nicehash, do they use lolMiner or a different miner for Zhash? I know they used to use various 3rdparty miners but I never really liked their auto-switching so I preferred to setup miners manually even when mining on Nicehash.

I think you are right with your comments... is always better to get the server parameters from https://www.nicehash.com/stratum-generator

SCF0

newbie

Activity: 9

Merit: 0

Quote from: jgonzi on March 17, 2021, 04:51:56 PM

I always recommend

:loop
lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
timeout 10
goto loop

This won't help KingsGroup.IT though but it is an improvement if you want to keep the miner up after crashes.

KingsGroup.IT, can you post the output of lolMiner.exe --list-devices? I still suspect it's somehow not using both GPUs properly. Also you mentioned Nicehash, do they use lolMiner or a different miner for Zhash? I know they used to use various 3rdparty miners but I never really liked their auto-switching so I preferred to setup miners manually even when mining on Nicehash.

dimidimi

newbie

Activity: 5

Merit: 0

Quote from: dext-r on March 18, 2021, 05:25:18 AM

It's a miracle to mine in windows with 4gb 10+ mh/s

MSI Z170 Pro A mobo: • 2 x PCIe 3.0 x16 slots (support x16/ x4 modes)

if you use M.2 ssd that can use some PCIe lanes, use some USB flash or SATA ssd and some linux for better hashrate

Ye man, sadly my windows is on m2ssd. possibly what takes some lanes away, and i use this deskop daily so sad.
I do mine with 1070ti around 29mh and rx480 around 19mh if single x16 is taken

dext-r

newbie

Activity: 17

Merit: 0

Quote from: dimidimi on March 17, 2021, 05:44:31 PM

Hello,
Im having trouble running with 2x XFX rx480 4gb on z170 A pro MotherBoard (2x x16pci) on ETH
When i run ONE card using lolminer i get 19-20mh
--4g-alloc-size 4248 --keepfree 8 --devices 0

if allocation size is below this value, i get a joke hash (2-3mh)

As soon as i put second rx480 here is what happends

Card1: 14-15mh
Card2: 4-5mh

Set Gen3,
bove 4G decoding: enabled
driver version adrenaline 20.11.2
Windows 10

Im using windows, booted from m2 drive on motherboard, is it possible that it makes a conflict, will switching to linux help.
Never mined in linux before.

Thanks, kind regards

It's a miracle to mine in windows with 4gb 10+ mh/s

MSI Z170 Pro A mobo: • 2 x PCIe 3.0 x16 slots (support x16/ x4 modes)

if you use M.2 ssd that can use some PCIe lanes, use some USB flash or SATA ssd and some linux for better hashrate

dimidimi

newbie

Activity: 5

Merit: 0

Quote from: jgonzi on March 17, 2021, 06:55:07 PM

That normal... with 1 Card you are using x16, when you put both is x8,x8...

But I seen ppl on group that can mine 2x RX4xx cards if there are two x16 slots (x8 x2) is it cause dag went up or..?

lxspector

newbie

Activity: 3

Merit: 0

Hi, please do something with eror wathdog - I can't use MRR login/ETH wallet, ex.: user.123456. Miner erise "." like a mistake. So don't work ETH+ZIL mining Sad

jgonzi

member

Activity: 639

Merit: 19

Quote from: dimidimi on March 17, 2021, 05:44:31 PM

Hello,
Im having trouble running with 2x XFX rx480 4gb on z170 A pro MotherBoard (2x x16pci) on ETH
When i run ONE card using lolminer i get 19-20mh
--4g-alloc-size 4248 --keepfree 8 --devices 0

if allocation size is below this value, i get a joke hash (2-3mh)

As soon as i put second rx480 here is what happends

Card1: 14-15mh
Card2: 4-5mh

Set Gen3,
bove 4G decoding: enabled
driver version adrenaline 20.11.2
Windows 10

Im using windows, booted from m2 drive on motherboard, is it possible that it makes a conflict, will switching to linux help.
Never mined in linux before.

Thanks, kind regards

That normal... with 1 Card you are using x16, when you put both is x8,x8...

dimidimi

newbie

Activity: 5

Merit: 0

Hello,
Im having trouble running with 2x XFX rx480 4gb on z170 A pro MotherBoard (2x x16pci) on ETH
When i run ONE card using lolminer i get 19-20mh
--4g-alloc-size 4248 --keepfree 8 --devices 0

if allocation size is below this value, i get a joke hash (2-3mh)

As soon as i put second rx480 here is what happends

Card1: 14-15mh
Card2: 4-5mh

Set Gen3,
bove 4G decoding: enabled
driver version adrenaline 20.11.2
Windows 10

Im using windows, booted from m2 drive on motherboard, is it possible that it makes a conflict, will switching to linux help.
Never mined in linux before.

Thanks, kind regards

jgonzi

member

Activity: 639

Merit: 19

Quote from: KingsGroup.IT on March 17, 2021, 09:41:08 AM

Quote from: SCF0 on March 16, 2021, 05:50:26 PM

Quote from: KingsGroup.IT on March 16, 2021, 05:21:46 PM

does anyone understand how nicehash does it?
os = Win 10 x64

Can you post the commandline you use? (exclude the wallet address for privacy) And did you look at the output with the --list-devices option?

@echo off

setlocal enableDelayedExpansion

Rem #################################
Rem ## Begin of user-editable part ##
Rem #################################

set "POOL=btg.2miners.com:4040"
set "WALLET=xxxxxxxxxxxxxxxxxxx.workerName"
set "ALGO=EQUI144_5"
set "PERSONALIZATION=BgoldPoW"

Rem #################################
Rem ## End of user-editable part ##
Rem #################################

lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
pause

I always recommend

:loop
lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
timeout 10
goto loop

KingsGroup.IT

newbie

Activity: 22

Merit: 0

Quote from: SCF0 on March 16, 2021, 05:50:26 PM

Quote from: KingsGroup.IT on March 16, 2021, 05:21:46 PM

does anyone understand how nicehash does it?
os = Win 10 x64

Can you post the commandline you use? (exclude the wallet address for privacy) And did you look at the output with the --list-devices option?

@echo off

setlocal enableDelayedExpansion

Rem #################################
Rem ## Begin of user-editable part ##
Rem #################################

set "POOL=btg.2miners.com:4040"
set "WALLET=xxxxxxxxxxxxxxxxxxx.workerName"
set "ALGO=EQUI144_5"
set "PERSONALIZATION=BgoldPoW"

Rem #################################
Rem ## End of user-editable part ##
Rem #################################

lolMiner.exe -a !ALGO! --pers !PERSONALIZATION! --pool !POOL! --user !WALLET!
pause

SCF0

newbie

Activity: 9

Merit: 0

Quote from: KingsGroup.IT on March 16, 2021, 05:21:46 PM

does anyone understand how nicehash does it?
os = Win 10 x64

Can you post the commandline you use? (exclude the wallet address for privacy) And did you look at the output with the --list-devices option?

KingsGroup.IT

newbie

Activity: 22

Merit: 0

Quote from: KingsGroup.IT on March 16, 2021, 04:47:32 PM

Quote from: SCF0 on March 16, 2021, 02:40:29 PM

Quote from: KingsGroup.IT on March 16, 2021, 01:16:54 PM

How does nicehash get +45 sol (algo Zhash) with a AMD HD7990 GPU using lol miner 1.21?
I downloaded this original version from gihub and... starting it... gives me a maximum of 21 sol.. with the exact same gpu.
how does nicehash do?

To me this looks like you are only mining on one of the two GPUs of this dual GPU card. As I posted yesterday, I can get 24sol/s on a single of these GPUs (at 950/1500 clocks with the timing mod). So when properly set up to run on both GPUs that sounds feasible. Look at the output of ./lolMiner --list-devices.

no... With nice hash miner ... each GPU mines + 20 sol each one .. Using the original version of lolminer each gpu makes a maximum of 10 sol each one

does anyone understand how nicehash does it?
os = Win 10 x64

jgonzi

member

Activity: 639

Merit: 19

Quote from: sxemini on March 16, 2021, 08:57:57 AM

Quote from: jgonzi on March 15, 2021, 03:07:05 PM

Quote from: jim007 on March 14, 2021, 07:20:19 PM

The best I could get for my 1070s was 26 MH/s at 70 TDP, Core 100, and Memory 600 which keeps them below 70C; if i increase memory up to 620 the rig is unstable. One with double fan goes up to 29 MH/s.

I suppose you are in Windows?... the Serie 10x0 sometimes need to check if reducing Mhz of the memory goes faster... because the memory is making errors and the gpu tries to recheck... that makes a reduction of the Mhs too... and a decrease of the Memory Mhz helps to have less mem errors an increase the hashrate

TDP is to low. Set a fixed vcore to 900mv for example. I can do around 28mh with 120w. By the way why no one used fixed vcore on Nvidia cards? All decrease Powerlimit, but with fixed vcore, the rigs runs more stable, the wattage don´t jump up and down. We all set fixed vcore on amd gpu´s, but no one use it on nvidia cards Huh

And not all pascal gpus have this TLB failure, the 1070ti´s have slightly other architecture, and there the hashrate don´t decrease with every new epoch. I have a few 1070ti´s running with 34 - 35 mh with same settings for 2 years now.

That can be done the the fix in Windows and now is also a option in RaveOS

KingsGroup.IT

newbie

Activity: 22

Merit: 0

Quote from: SCF0 on March 16, 2021, 02:40:29 PM

Quote from: KingsGroup.IT on March 16, 2021, 01:16:54 PM

How does nicehash get +45 sol (algo Zhash) with a AMD HD7990 GPU using lol miner 1.21?
I downloaded this original version from gihub and... starting it... gives me a maximum of 21 sol.. with the exact same gpu.
how does nicehash do?

To me this looks like you are only mining on one of the two GPUs of this dual GPU card. As I posted yesterday, I can get 24sol/s on a single of these GPUs (at 950/1500 clocks with the timing mod). So when properly set up to run on both GPUs that sounds feasible. Look at the output of ./lolMiner --list-devices.

no... With nice hash miner ... each GPU mines + 20 sol each one .. Using the original version of lolminer each gpu makes a maximum of 10 sol each one

SCF0

newbie

Activity: 9

Merit: 0

Quote from: KingsGroup.IT on March 16, 2021, 01:16:54 PM

How does nicehash get +45 sol (algo Zhash) with a AMD HD7990 GPU using lol miner 1.21?
I downloaded this original version from gihub and... starting it... gives me a maximum of 21 sol.. with the exact same gpu.
how does nicehash do?

To me this looks like you are only mining on one of the two GPUs of this dual GPU card. As I posted yesterday, I can get 24sol/s on a single of these GPUs (at 950/1500 clocks with the timing mod). So when properly set up to run on both GPUs that sounds feasible. Look at the output of ./lolMiner --list-devices.

KingsGroup.IT

newbie

Activity: 22

Merit: 0

How does nicehash get +45 sol (algo Zhash) with a AMD HD7990 GPU using lol miner 1.21?
I downloaded this original version from gihub and... starting it... gives me a maximum of 21 sol.. with the exact same gpu.
how does nicehash do?

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 36. (Read 155326 times)