lolMiner 1.64: Fastest Kaspa miner in market - page 5.

Dowper_

member

Activity: 221

Merit: 12

Quote from: jgonzi on February 25, 2023, 02:31:25 PM

Quote from: Dowper_ on February 10, 2023, 08:57:59 AM

My test with RTX 4090 - Nexa Hashrate (Rigel Miner vs lolMiner) - https://www.youtube.com/watch?v=ajCAFksA2Po

Retry ... I saw in the HOF a 348Mhs with lolminer 1.68 and a 4090 unbeatable at the moment

Yes, I made a new test: RTX 4090 - Nexa Hashrate (Rigel 1.3.7 & lolMiner 1.68) - https://www.youtube.com/watch?v=BGf7-SqClSQ

batsonxl

member

Activity: 1196

Merit: 26

Quote from: jgonzi on February 25, 2023, 02:30:24 PM

Quote from: batsonxl on February 25, 2023, 12:51:15 PM

Can someone please help how to set target temperature in lolminer and mem settings too. Core clock roks good,for example i set clock 1350 for rtx3060ti is sets perfect 1350 but memory if i set 1100 is says 5000mhz Huh

Also how to set temp argument?
Thanks

Well that depent the parameters;
Overclock Options:
Parameter   Description
--cclk arg (=*)   The core clock used for the GPUs. Cards are separated with a comma. "*" can be used to skip a card.
--coff arg (=*)   The core offset used for the GPUs. Cards are separated with a comma. "*" can be used to skip a card.
--mclk arg (=*)   The memory clock only used for KASPA/ALPH to reduce Watts with value 810. "*" can be used to skip a card.
--moff arg (=*)   The memory offset used for the GPUs. Cards are separated with a comma. "*" can be used to skip a card.
--pl arg (=*)   The power limit used for the GPUs. Cards are separated with a comma. "*" can be used to skip a card.
--fan arg (=*)   The % of the fan used for the GPUs. Cards are separated with a comma. "*" can be used to skip a card.
--no-oc-reset   To avoid reset the overclock settings applied when ending the miner

Cclk works good on 3060ti and --fan also working good. But why i cant set mclk for 3060ti and non ti. Please give example so i can try. I tried many mclk numbers but no luck it doent go higher than 7000mhs. Still confusing this memory mhz afterburner shows 1100mhs but miner shows 7900mhs. Please can you add temperature target so i can set 55C.thanks

jgonzi

member

Activity: 639

Merit: 19

Quote from: Dowper_ on February 10, 2023, 08:57:59 AM

My test with RTX 4090 - Nexa Hashrate (Rigel Miner vs lolMiner) - https://www.youtube.com/watch?v=ajCAFksA2Po

Retry ... I saw in the HOF a 348Mhs with lolminer 1.68 and a 4090 unbeatable at the moment

jgonzi

member

Activity: 639

Merit: 19

Quote from: batsonxl on February 25, 2023, 12:51:15 PM

Can someone please help how to set target temperature in lolminer and mem settings too. Core clock roks good,for example i set clock 1350 for rtx3060ti is sets perfect 1350 but memory if i set 1100 is says 5000mhz Huh

Also how to set temp argument?
Thanks

Well that depent the parameters;
Overclock Options:
Parameter   Description
--cclk arg (=*)   The core clock used for the GPUs. Cards are separated with a comma. "*" can be used to skip a card.
--coff arg (=*)   The core offset used for the GPUs. Cards are separated with a comma. "*" can be used to skip a card.
--mclk arg (=*)   The memory clock only used for KASPA/ALPH to reduce Watts with value 810. "*" can be used to skip a card.
--moff arg (=*)   The memory offset used for the GPUs. Cards are separated with a comma. "*" can be used to skip a card.
--pl arg (=*)   The power limit used for the GPUs. Cards are separated with a comma. "*" can be used to skip a card.
--fan arg (=*)   The % of the fan used for the GPUs. Cards are separated with a comma. "*" can be used to skip a card.
--no-oc-reset   To avoid reset the overclock settings applied when ending the miner

batsonxl

member

Activity: 1196

Merit: 26

Can someone please help how to set target temperature in lolminer and mem settings too. Core clock roks good,for example i set clock 1350 for rtx3060ti is sets perfect 1350 but memory if i set 1100 is says 5000mhz Huh

Also how to set temp argument?
Thanks

FP91G

legendary

Activity: 1610

Merit: 1026

lolMiner 1.68

Changes
Significantly improved Nexa mining performance on supported GPUs (e.g. up to +25% on 8G Ampere GPUs)

Fixes
Fixed a bug that can make the miner crash with error message "Authorization problem on all configured pools 1" during Nexa mining

Note
The alternative Windows version uses a different mechanism to determine the available memory on a Windows system. On most 8G GPUs this will cause the miner to select a smaller dataset table that has only slightly above 2 G. Therefore the alternative version might be a good choice for systems with connected screens or for Nexa / Zil mining using the Zil switching app.

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.68

Check all links with this post from the developer.
https://bitcointalksearch.org/topic/lolminer-164-fastest-kaspa-miner-in-market-4724735

Digital_Seytan

jr. member

Activity: 220

Merit: 2

Eth+Zil Pool: https://k1pool.com/invite/895eb075 !

Test Nexa Hashrate (Rigel Miner vs Bzminer vs lolMiner) - https://youtu.be/es6icyj8hNQ

Shocked

Dowper_

member

Activity: 221

Merit: 12

My test with RTX 4090 - Nexa Hashrate (Rigel Miner vs lolMiner) - https://www.youtube.com/watch?v=ajCAFksA2Po

FP91G

legendary

Activity: 1610

Merit: 1026

lolMiner 1.67
Changes
Improved Nexa performance on Nvidia Turing based gpus by approximately 35%+.
Improved Nexa performance on 8G Nvidia Ampere gpus by approximately 1.5% when memory is not locked and ~3% on locked memory (5000). 10G and higher gpus got an additional 5% performance increase.
Improved Nexa performance on Nvidia Ada based gpus by approximately 25% on locked memory clock (5000) and about 8% on unlocked memory.
Added Nexa echelon mining protocol to support pools using it, e.g. 137pool.org. The needed format will be automatically detected when connecting to a pool using it.
Updated WebUI for Nexa mining and more pools to support.
Windows: Updated GUI

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.67

Check all links with this post from the developer.
https://bitcointalksearch.org/topic/lolminer-164-fastest-kaspa-miner-in-market-4724735

batsonxl

member

Activity: 1196

Merit: 26

Quote from: deedeeranged on February 05, 2023, 03:37:54 PM

Quote from: batsonxl on February 05, 2023, 12:34:34 PM

Quote from: tbearhere on February 05, 2023, 09:44:14 AM

Quote from: batsonxl on February 05, 2023, 06:50:44 AM

Hello dear miners.
Can someone help me please with lolminer.
Sometimes when you mine o nicehash i dont know why it happens maybe it losses conection with or some error happens then lol miner stop and says press any key to continue.is there anyway make miner restar again? Something to add to batch file. Im on win10 64.
Thanks regards

Try lolminer Discord Group : https://discord.gg/zypMYNbJ5k

Thanks for discord but i cant use discord it is blocked here. Please write here how can restart miner.thanks

Just an educated guess the following is mentioned on their wiki:

--watchdog off/exit/script The options are:

off this will do nothing except for printing a message. If only a single card did crash and not the whole driver this means the other cards will continue mining.

exit this will close the miner with a exit code of 42. This can be picked up by the .sh or .bat script that did start the miner (an example is provided in mine_eth.sh and mine_eth.bat) so the miner will restart after some seconds of pause. This is recommended option for Nvidia cards.

script With this option the miner will call an external script (default path is current working directory and there emergency.sh / .bat), which can be configured with --watchdogscript. The moment the script is called the miner itself will exit. The script needs to take care about rebooting the rig or informing the OS what to do. Since this was the default behavior in previous versions it also is the default. In case the script can not be found, an error will be printed and the miner will continue as with --watchdog off.

Hope this clarifies it a bit. I am not a user of lolMiner but I would play around with this.

Cheers

Thanks so much. this one will also do the job if i configure correct.
There was also another way. You just creat loop in bat file so when miner dont say press any key to continue instead it load miner again with same parameteres.

deedeeranged

member

Activity: 325

Merit: 42

Quote from: batsonxl on February 05, 2023, 12:34:34 PM

Quote from: tbearhere on February 05, 2023, 09:44:14 AM

Quote from: batsonxl on February 05, 2023, 06:50:44 AM

Hello dear miners.
Can someone help me please with lolminer.
Sometimes when you mine o nicehash i dont know why it happens maybe it losses conection with or some error happens then lol miner stop and says press any key to continue.is there anyway make miner restar again? Something to add to batch file. Im on win10 64.
Thanks regards

Try lolminer Discord Group : https://discord.gg/zypMYNbJ5k

Thanks for discord but i cant use discord it is blocked here. Please write here how can restart miner.thanks

Just an educated guess the following is mentioned on their wiki:

--watchdog off/exit/script The options are:

off this will do nothing except for printing a message. If only a single card did crash and not the whole driver this means the other cards will continue mining.

exit this will close the miner with a exit code of 42. This can be picked up by the .sh or .bat script that did start the miner (an example is provided in mine_eth.sh and mine_eth.bat) so the miner will restart after some seconds of pause. This is recommended option for Nvidia cards.

script With this option the miner will call an external script (default path is current working directory and there emergency.sh / .bat), which can be configured with --watchdogscript. The moment the script is called the miner itself will exit. The script needs to take care about rebooting the rig or informing the OS what to do. Since this was the default behavior in previous versions it also is the default. In case the script can not be found, an error will be printed and the miner will continue as with --watchdog off.

Hope this clarifies it a bit. I am not a user of lolMiner but I would play around with this.

Cheers

batsonxl

member

Activity: 1196

Merit: 26

Quote from: tbearhere on February 05, 2023, 09:44:14 AM

Quote from: batsonxl on February 05, 2023, 06:50:44 AM

Hello dear miners.
Can someone help me please with lolminer.
Sometimes when you mine o nicehash i dont know why it happens maybe it losses conection with or some error happens then lol miner stop and says press any key to continue.is there anyway make miner restar again? Something to add to batch file. Im on win10 64.
Thanks regards

Try lolminer Discord Group : https://discord.gg/zypMYNbJ5k

Thanks for discord but i cant use discord it is blocked here. Please write here how can restart miner.thanks

tbearhere

legendary

Activity: 3122

Merit: 1003

Quote from: batsonxl on February 05, 2023, 06:50:44 AM

Hello dear miners.
Can someone help me please with lolminer.
Sometimes when you mine o nicehash i dont know why it happens maybe it losses conection with or some error happens then lol miner stop and says press any key to continue.is there anyway make miner restar again? Something to add to batch file. Im on win10 64.
Thanks regards

Try lolminer Discord Group : https://discord.gg/zypMYNbJ5k

batsonxl

member

Activity: 1196

Merit: 26

Hello dear miners.
Can someone help me please with lolminer.
Sometimes when you mine o nicehash i dont know why it happens maybe it losses conection with or some error happens then lol miner stop and says press any key to continue.is there anyway make miner restar again? Something to add to batch file. Im on win10 64.
Thanks regards

FP91G

legendary

Activity: 1610

Merit: 1026

Quote from: Riptide_NVN on February 02, 2023, 09:54:52 AM

I'm having issues with dual ETC+ZIL on crazypool. The miner doesn't ever switch off ZIL once it switches over to it.

Quote

lolMiner.exe --apiport 8020 --tls off --worker 7900xtx --algo ETCHASH --pool us.crazypool.org:7000 --user etcwallet.7900xtx --enablezilcache --dualmode zil --dualpool us.crazypool.org:5005 --dualuser zilwallet.7900xtx

Using the above syntax no errors or issues on startup. v1.65.

Any ideas on why it won't switch back? Is it a bug in the miner or some incompatibility with the pool?

7900XTX on latest AMD driver.

try this pool and their easy setup for beginners
https://ezil.me/start
I had no errors when mining with this pool. Or if you don't want to change the pool, then try contacting their tech support to have them check your settings. Try mining for a while, make sure you have problems with the crazypool or settings.

Riptide_NVN

member

Activity: 294

Merit: 16

I'm having issues with dual ETC+ZIL on crazypool. The miner doesn't ever switch off ZIL once it switches over to it.

Quote

lolMiner.exe --apiport 8020 --tls off --worker 7900xtx --algo ETCHASH --pool us.crazypool.org:7000 --user etcwallet.7900xtx --enablezilcache --dualmode zil --dualpool us.crazypool.org:5005 --dualuser zilwallet.7900xtx

Using the above syntax no errors or issues on startup. v1.65.

Any ideas on why it won't switch back? Is it a bug in the miner or some incompatibility with the pool?

7900XTX on latest AMD driver.

FP91G

legendary

Activity: 1610

Merit: 1026

Quote from: Dowper_ on January 27, 2023, 12:28:37 PM

I tried with 22.10.1 and now with 22.12.2 and still not starting...

Windows? Run DDU, then install the necessary drivers.

Dowper_

member

Activity: 221

Merit: 12

RTX 4090 - Nexa Hashrate & Profit - https://www.youtube.com/watch?v=913ycvlPFw4
My test on RTX 4090 with lolMiner, a lot better than other miners.

When testing with RX 5700 XT it says:

Setup Miner...
OpenCL driver detected.
Number of OpenCL supported GPUs: 1
Cuda driver detected.
Number of Cuda supported GPUs: 0
Device 0:
Name: AMD Radeon RX 5700 XT
Address: 40:0
Vendor: Advanced Micro Devices (AMD)
Drivers: OpenCL
Memory: 8176 MByte (8173 MByte free)
Active: false (Unsupported device or driver version.)

All devices deselected or failed compatiblity check. Closing lolMinerPress any key to continue . . .

I tried with 22.10.1 and now with 22.12.2 and still not starting...

FP91G

legendary

Activity: 1610

Merit: 1026

lolMiner 1.66

Added support for mining Nexa on Nvidia Pascal or newer generation GPUs (1). Use --algo NEXA to mine it. Fee is 2%.
Note: The pool protocol supported matches the one introduced by rplant pool. That said pools tested by this version are in alphabetical order: acc-pool.pw, rplant.xyz, vipor.net and woolypooly.com. That said this list is not exclusive and every other pool following this protocol should work.
Note 2: This code is joint work with Iedoc from BzMiner and it is a refined version with approximately 20% higher speed then the code released in BzMiner v13.0.1. An updated version of BzMiner featuring the improvements of this kernel as well as the same fee level will be released soon.
(1) Primary focus in optimization were the low to medium range Nvidia Ampere GPUs. The performance of other generations may vary, but certainly improve the next versions.

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.66

Check all links with this post from the developer.
https://bitcointalksearch.org/topic/lolminer-164-fastest-kaspa-miner-in-market-4724735

FP91G

legendary

Activity: 1610

Merit: 1026

lolMiner 1.65a

Fixed a bug causing sometimes high number of duplicate shares on Kaspa when dual mining with ETC.
Changed kaspa stratum behavior: Kaspa mining will now start only after the pool did send an authorization message. This prevents rejected shares at startup.
Slightly changed dual mining tuning behavior to a mode a bit slower, but less likely to hang up the GPUs at startup.

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.65a

Check all links with this post from the developer.
https://bitcointalksearch.org/topic/lolminer-164-fastest-kaspa-miner-in-market-4724735

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 5. (Read 155175 times)