MinerEU.com 850USD THunderX3 80 USD Blizzard , 4*Blizzard @ 60 USD each - page 50.

JPS2K5

full member

Activity: 266

Merit: 100

Quote from: JPS2K5 on June 02, 2014, 09:00:53 AM

Quote from: james42 on June 02, 2014, 08:57:35 AM

What temps you running?

I can't see temps with this image but it feels fine.

https://www.dropbox.com/s/zz8uj8xbt8tkqi4/ltc-a2-2014-05-21.img.gz

Latest image with 1280mhz. I just downloaded an image writer for windows and wrote the image on the SD. Easy as... PI....

JPS2K5

full member

Activity: 266

Merit: 100

Quote from: james42 on June 02, 2014, 08:57:35 AM

What temps you running?

I can't see temps with this image but it feels fine.

ShopemNL

legendary

Activity: 1025

Merit: 1001

How can you fix the image back to old? So not the minereu one>

james42

sr. member

Activity: 434

Merit: 250

What temps you running?

JPS2K5

full member

Activity: 266

Merit: 100

Up and running.

I took the Original Innosillicon image that enables 1280mhz. Both minis are doing 31 Mh/s+ per blade and not that much HW errors.

5s):31.06M (avg):31.09Mh/s (pool):29.34Mh/s | A:1774781 R:0 HW:110 WU:26860.9/m
5s):31.57M (avg):31.30Mh/s (pool):26.12Mh/s | A:230187 R:0 HW:57 WU:23912.0/m

I guess I'm Lucky ? Roll Eyes

ShopemNL

legendary

Activity: 1025

Merit: 1001

Quote from: minereu.com on June 01, 2014, 07:13:58 PM

Quote from: james42 on June 01, 2014, 05:49:52 PM

1280Mh/s gives me >6% HW errors. I don't know if there is not enough voltage getting through or whether the heat starts to become a problem. I can live with 0.5% dead cores

yeah, we notcied that as well, 1280 is not always the best for every board. you want to manually adjust the frequency of each board and tune it for the best frequency.

How do you do this? Getting >6% aswell.

minereu.com

sr. member

Activity: 244

Merit: 250

Quote from: chipxtreme on June 02, 2014, 06:29:34 AM

I'm also getting 40% HW errors with one blade on one A2mini and 15% HW errors on the one blade of the other A2mini since switching to scripta_a2

Not good, loads of HW errors and 4 times the claimed power usage.

40% hardware error seems to indicate you are running @ 1280 frequency. if you installed your scripta on 1st June. you are adviced to install it again to switch back to 1200 freuqency. we notcied 1280 is not working for all .

Regarding power, how do you measure your power?

chipxtreme

newbie

Activity: 34

Merit: 0

I'm also getting 40% HW errors with one blade on one A2mini and 15% HW errors on the one blade of the other A2mini since switching to scripta_a2

Not good, loads of HW errors and 4 times the claimed power usage.

minereu.com

sr. member

Activity: 244

Merit: 250

Quote from: james42 on June 02, 2014, 05:56:49 AM

They do use a crap load of power though, more than advertised

I will do a test with the power meter myself later today and see how much exactly it is and report back here.

JPS2K5

full member

Activity: 266

Merit: 100

I guess there is no image for the SD card that I can just download and put on the card under windows? and then put the card into the Pi and boot and run ?

james42

sr. member

Activity: 434

Merit: 250

They do use a crap load of power though, more than advertised

JoostB

sr. member

Activity: 391

Merit: 250

Quote from: chipxtreme on June 02, 2014, 04:01:00 AM

I've got a strange issue with my a2 mini's. I've got them attached to a watt meter and that tells me they are both using 610W.

I have an early type of smart meter that tells me how much electric I'm using. With the mini's switched off i'm using roughly 1KW - which is my GPU rig running X11 and normal electrical household items. When I switch these on it now tells me i'm using 2.8-3KW. Switch them off and it goes back down to 1KW.

How can this be?

It can be a problem with the power meter, a lot of these have problems with switched PSU's.
You need one with true RMS measurement.

JPS2K5

full member

Activity: 266

Merit: 100

Quote from: chipxtreme on June 02, 2014, 04:01:00 AM

I've got a strange issue with my a2 mini's. I've got them attached to a watt meter and that tells me they are both using 610W.

I have an early type of smart meter that tells me how much electric I'm using. With the mini's switched off i'm using roughly 1KW - which is my GPU rig running X11 and normal electrical household items. When I switch these on it now tells me i'm using 2.8-3KW. Switch them off and it goes back down to 1KW.

How can this be?

That can be if you got a Dragon 30Mhs miner instead of an A2 mini.... Dragon uses ~1000 watts

chipxtreme

newbie

Activity: 34

Merit: 0

I've got a strange issue with my a2 mini's. I've got them attached to a watt meter and that tells me they are both using 610W.

I have an early type of smart meter that tells me how much electric I'm using. With the mini's switched off i'm using roughly 1KW - which is my GPU rig running X11 and normal electrical household items. When I switch these on it now tells me i'm using 2.8-3KW. Switch them off and it goes back down to 1KW.

How can this be?

JoostB

sr. member

Activity: 391

Merit: 250

Quote from: james42 on June 02, 2014, 03:09:13 AM

So you don't have any more A2 Mini in stock? I can't afford £6000 for an A2BOX yet.

Quote from: minereu.com on June 02, 2014, 02:18:40 AM

if you order A2MINI, there is not a lot of production recently. so our stock is up and tight. A2BOX price has dropped, so it is better off ming a few weeks before you get new ones.

i am sure new ones won't start cheap, i might be wrong but i think it is logical guess

I'm also thinking about a second A2 Mini when the one I'll get today runs fine.
I'd rather have 2 or 3 Mini's instead of an A2 BOX, more flexible and better resellable in the future.

Is there a possibility to get hold of the single blades? And if so, what will they approximately cost?

james42

sr. member

Activity: 434

Merit: 250

So you don't have any more A2 Mini in stock? I can't afford £6000 for an A2BOX yet.

Quote from: minereu.com on June 02, 2014, 02:18:40 AM

if you order A2MINI, there is not a lot of production recently. so our stock is up and tight. A2BOX price has dropped, so it is better off ming a few weeks before you get new ones.

i am sure new ones won't start cheap, i might be wrong but i think it is logical guess

krjalone

member

Activity: 87

Merit: 11

Quote from: minereu.com on June 02, 2014, 02:18:40 AM

Quote from: james42 on June 02, 2014, 01:45:49 AM

Yes it will have a sticker on the front with 192.168.1.x on it.

MinerEU - I'm almost ready to order a second one, am I better off waiting for a new hardware revision if any?

if you order A2MINI, there is not a lot of production recently. so our stock is up and tight. A2BOX price has dropped, so it is better off ming a few weeks before you get new ones.

i am sure new ones won't start cheap, i might be wrong but i think it is logical guess

Sent You a PM. If you can check my order #1557

Thanks Wink

minereu.com

sr. member

Activity: 244

Merit: 250

Quote from: james42 on June 02, 2014, 01:45:49 AM

Yes it will have a sticker on the front with 192.168.1.x on it.

MinerEU - I'm almost ready to order a second one, am I better off waiting for a new hardware revision if any?

if you order A2MINI, there is not a lot of production recently. so our stock is up and tight. A2BOX price has dropped, so it is better off ming a few weeks before you get new ones.

i am sure new ones won't start cheap, i might be wrong but i think it is logical guess

minereu.com

sr. member

Activity: 244

Merit: 250

Quote from: JPS2K5 on June 02, 2014, 01:23:10 AM

Hmm..... mine should finally arrive today. But it looks like I'll have to instruct someone to hook it up if I want it up and running asap.

Someone tell me, the thing has a standard IP adress 1st time you boot it up ? In the 192.168.x.x range?

innosilicon firmware using 192.168.1.* on the label. minerEU will later repalce it with DHCP and MinerEU firmware on scripta for future dispatches

james42

sr. member

Activity: 434

Merit: 250

Yes it will have a sticker on the front with 192.168.1.x on it.

MinerEU - I'm almost ready to order a second one, am I better off waiting for a new hardware revision if any?

Topic: MinerEU.com 850USD THunderX3 80 USD Blizzard , 4*Blizzard @ 60 USD each - page 50. (Read 94957 times)