New client looks good.
Since the Decred update, the mining stats for DCR on the Yiimp (yiimp.ccminer.org:3252) pool just show as ($ inva). Any chance you could update that?
Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 124. (Read 167240 times)
April 27, 2017, 01:22:33 PM
April 27, 2017, 12:59:53 PM
v2.9 COMES WITHIN 24 HOUR!
- WattTool improvements
- Nvidia impovements
- New Graphics UI
- and some new stuff..
changelog tomorrow.
- WattTool improvements
- Nvidia impovements
- New Graphics UI
- and some new stuff..
changelog tomorrow.
April 27, 2017, 11:11:32 AM
My indexes at watttool is
20
0
8
14
2
36
It seems that hardware monitor uses the exact same indexes watttool uses.
That's probably why you cannot detect my GPU temperatures
https://minerstat.com/public/jimtom.html
Your program search for temperature of GPU with index 24, for example, and there is no GPU with 24 index. The only matching GPU is the one with 0 index.
Your system always download 0.ini, 6.ini, 12.ini, 18.ini, 24.ini, and 30.ini
I think most of your users do not have watttool with those indexes.
I opened watttool directory and I found this in 6.ini
[General]
NoGUI=1
[Adapter]
Index=6
[GPU]
Mode=Manual
P1_CLK=608
P1_VID=818
P2_CLK=910
P2_VID=837
So the watttool profile that is sent from your server has index 6. But there is no card with index 6 on my card.
is there a way to change my watttool index so that it match your indexes?
Or, do other people, for some reasons, have the same watttool indexes like you? 0, 6,12,18,24,30? I got 2 rigs and the number always differ. I wonder what the trick is to get such neat numbers 0,2,4,6,8,24 or 0,2,8,14,20,36
I wonder where you store those inis? Maybe I can see what's in it and check the issue.
20
0
8
14
2
36
It seems that hardware monitor uses the exact same indexes watttool uses.
That's probably why you cannot detect my GPU temperatures
https://minerstat.com/public/jimtom.html
Your program search for temperature of GPU with index 24, for example, and there is no GPU with 24 index. The only matching GPU is the one with 0 index.
Your system always download 0.ini, 6.ini, 12.ini, 18.ini, 24.ini, and 30.ini
I think most of your users do not have watttool with those indexes.
I opened watttool directory and I found this in 6.ini
[General]
NoGUI=1
[Adapter]
Index=6
[GPU]
Mode=Manual
P1_CLK=608
P1_VID=818
P2_CLK=910
P2_VID=837
So the watttool profile that is sent from your server has index 6. But there is no card with index 6 on my card.
is there a way to change my watttool index so that it match your indexes?
Or, do other people, for some reasons, have the same watttool indexes like you? 0, 6,12,18,24,30? I got 2 rigs and the number always differ. I wonder what the trick is to get such neat numbers 0,2,4,6,8,24 or 0,2,8,14,20,36
I wonder where you store those inis? Maybe I can see what's in it and check the issue.
Good to know that, i will add option to manual edit the GPU ids. Thank you
April 27, 2017, 08:26:49 AM
My indexes at watttool is
20
0
8
14
2
36
It seems that hardware monitor uses the exact same indexes watttool uses.
That's probably why you cannot detect my GPU temperatures
https://minerstat.com/public/jimtom.html
Your program search for temperature of GPU with index 24, for example, and there is no GPU with 24 index. The only matching GPU is the one with 0 index.
Your system always download 0.ini, 6.ini, 12.ini, 18.ini, 24.ini, and 30.ini
I think most of your users do not have watttool with those indexes.
I opened watttool directory and I found this in 6.ini
[General]
NoGUI=1
[Adapter]
Index=6
[GPU]
Mode=Manual
P1_CLK=608
P1_VID=818
P2_CLK=910
P2_VID=837
So the watttool profile that is sent from your server has index 6. But there is no card with index 6 on my card.
is there a way to change my watttool index so that it match your indexes?
Or, do other people, for some reasons, have the same watttool indexes like you? 0, 6,12,18,24,30? I got 2 rigs and the number always differ. I wonder what the trick is to get such neat numbers 0,2,4,6,8,24 or 0,2,8,14,20,36
I wonder where you store those inis? Maybe I can see what's in it and check the issue.
20
0
8
14
2
36
It seems that hardware monitor uses the exact same indexes watttool uses.
That's probably why you cannot detect my GPU temperatures
https://minerstat.com/public/jimtom.html
Your program search for temperature of GPU with index 24, for example, and there is no GPU with 24 index. The only matching GPU is the one with 0 index.
Your system always download 0.ini, 6.ini, 12.ini, 18.ini, 24.ini, and 30.ini
I think most of your users do not have watttool with those indexes.
I opened watttool directory and I found this in 6.ini
[General]
NoGUI=1
[Adapter]
Index=6
[GPU]
Mode=Manual
P1_CLK=608
P1_VID=818
P2_CLK=910
P2_VID=837
So the watttool profile that is sent from your server has index 6. But there is no card with index 6 on my card.
is there a way to change my watttool index so that it match your indexes?
Or, do other people, for some reasons, have the same watttool indexes like you? 0, 6,12,18,24,30? I got 2 rigs and the number always differ. I wonder what the trick is to get such neat numbers 0,2,4,6,8,24 or 0,2,8,14,20,36
I wonder where you store those inis? Maybe I can see what's in it and check the issue.
April 27, 2017, 08:03:19 AM
Hello can I change url of my public profile?
My current one is
https://minerstat.com/public/jimtom.html
My current one is
https://minerstat.com/public/jimtom.html
Only once you can change the profile url. RANDOM to UNIQE, if you want to change send me a message with
ACCESSKEY
NEW URL
What do you mean by GPU id?
Our watttool have these GPU "indexes"
20
0
8
14
2
36
It corresponds to GPU
4
1
5
2
3
0
in claymore
It corresponds to
Gpu number
0
1
2
3
4
5
in GPUz.
I saw 6.ini downloaded. However, there is no GPU in our rig with index 6. We have 0, 2, 8, 14, 20, 36. And it changes from one rig to another, though the sequence is always the same.
6.ini just created by the server. 6 gpu ini.
it means 36 index, but to be clear i will add option to change indexes on the website by yourself
April 27, 2017, 07:59:05 AM
Extended view has issues
This is what I found on extended views
...
It says I am mining XMR. I don't. I am mining ethererum. The
clasicall few is correct
...
Also, I only see temperature in GPU 0. How can I see temperature for all GPU?
Thank you, i check it now. GPU datas sent by OHM. (Open Hardware Monitor)
How do I have public page like
https://minerstat.com/public/coinscrow.html
Also we uses your watttool feature. Our watttool have these indexes by the way:
GPU-z Wattool Watttool Index PCI-e Claymore zecminer power voltage mem voltage
0 4 20 1 4 4 910 900 samsung
1 0 0 0 1 1 75 910 900 samsung
2 2 8 2 5 5 910 900
3 3 14 3 2 2 910 900
4 1 2 4 3 3 910 900
5 5 36 5 0 0 910 900
I saw 0.ini 6.ini 12.ini 18.ini 24.ini and 30.ini downloaded.
Well, that's not the actual number that shows up if I open wattool.
So how do I reconcile those numbers?
https://minerstat.com/public/coinscrow.html
Also we uses your watttool feature. Our watttool have these indexes by the way:
GPU-z Wattool Watttool Index PCI-e Claymore zecminer power voltage mem voltage
0 4 20 1 4 4 910 900 samsung
1 0 0 0 1 1 75 910 900 samsung
2 2 8 2 5 5 910 900
3 3 14 3 2 2 910 900
4 1 2 4 3 3 910 900
5 5 36 5 0 0 910 900
I saw 0.ini 6.ini 12.ini 18.ini 24.ini and 30.ini downloaded.
Well, that's not the actual number that shows up if I open wattool.
So how do I reconcile those numbers?
Settings >> Public Profile
Same like in WattTool program, by GPU id. 0 is 0 on the website to.
SOME NEWS ABOUT THE NEW CLIENT!!
- No more console UI.
- This is not the final version, i just testing.
- Come soon with another improvements.
What do you mean by GPU id?
Our watttool have these GPU "indexes"
20
0
8
14
2
36
It corresponds to GPU
4
1
5
2
3
0
in claymore
It corresponds to
Gpu number
0
1
2
3
4
5
in GPUz.
I saw 6.ini downloaded. However, there is no GPU in our rig with index 6. We have 0, 2, 8, 14, 20, 36. And it changes from one rig to another, though the sequence is always the same.
Here, let me show you the watttool screenshot of mine
April 27, 2017, 07:48:36 AM
Hello can I change url of my public profile?
My current one is
https://minerstat.com/public/jimtom.html
My current one is
https://minerstat.com/public/jimtom.html
April 27, 2017, 07:43:35 AM
Extended view has issues
This is what I found on extended views
...
It says I am mining XMR. I don't. I am mining ethererum. The
clasicall few is correct
...
Also, I only see temperature in GPU 0. How can I see temperature for all GPU?
Thank you, i check it now. GPU datas sent by OHM. (Open Hardware Monitor)
How do I have public page like
https://minerstat.com/public/coinscrow.html
Also we uses your watttool feature. Our watttool have these indexes by the way:
GPU-z Wattool Watttool Index PCI-e Claymore zecminer power voltage mem voltage
0 4 20 1 4 4 910 900 samsung
1 0 0 0 1 1 75 910 900 samsung
2 2 8 2 5 5 910 900
3 3 14 3 2 2 910 900
4 1 2 4 3 3 910 900
5 5 36 5 0 0 910 900
I saw 0.ini 6.ini 12.ini 18.ini 24.ini and 30.ini downloaded.
Well, that's not the actual number that shows up if I open wattool.
So how do I reconcile those numbers?
https://minerstat.com/public/coinscrow.html
Also we uses your watttool feature. Our watttool have these indexes by the way:
GPU-z Wattool Watttool Index PCI-e Claymore zecminer power voltage mem voltage
0 4 20 1 4 4 910 900 samsung
1 0 0 0 1 1 75 910 900 samsung
2 2 8 2 5 5 910 900
3 3 14 3 2 2 910 900
4 1 2 4 3 3 910 900
5 5 36 5 0 0 910 900
I saw 0.ini 6.ini 12.ini 18.ini 24.ini and 30.ini downloaded.
Well, that's not the actual number that shows up if I open wattool.
So how do I reconcile those numbers?
Settings >> Public Profile
Same like in WattTool program, by GPU id. 0 is 0 on the website to.
SOME NEWS ABOUT THE NEW CLIENT!!
- No more console UI.
- This is not the final version, i just testing.
- Come soon with another improvements.
April 27, 2017, 07:12:51 AM
How do I have public page like
https://minerstat.com/public/coinscrow.html
Also we uses your watttool feature. Our watttool have these indexes by the way:
GPU-z Wattool Watttool Index PCI-e Claymore zecminer power voltage mem voltage
0 4 20 1 4 4 910 900 samsung
1 0 0 0 1 1 75 910 900 samsung
2 2 8 2 5 5 910 900
3 3 14 3 2 2 910 900
4 1 2 4 3 3 910 900
5 5 36 5 0 0 910 900
I saw 0.ini 6.ini 12.ini 18.ini 24.ini and 30.ini downloaded.
Well, that's not the actual number that shows up if I open wattool.
So how do I reconcile those numbers?
https://minerstat.com/public/coinscrow.html
Also we uses your watttool feature. Our watttool have these indexes by the way:
GPU-z Wattool Watttool Index PCI-e Claymore zecminer power voltage mem voltage
0 4 20 1 4 4 910 900 samsung
1 0 0 0 1 1 75 910 900 samsung
2 2 8 2 5 5 910 900
3 3 14 3 2 2 910 900
4 1 2 4 3 3 910 900
5 5 36 5 0 0 910 900
I saw 0.ini 6.ini 12.ini 18.ini 24.ini and 30.ini downloaded.
Well, that's not the actual number that shows up if I open wattool.
So how do I reconcile those numbers?
April 27, 2017, 06:50:05 AM
Extended view has issues
This is what I found on extended views
It says I am mining XMR. I don't. I am mining ethererum. The
clasicall few is correct
Also, I only see temperature in GPU 0. How can I see temperature for all GPU?
April 26, 2017, 06:56:25 PM
Is anyone else having issues getting Dual Mining up and running? I cannot enable it in settings, if i go to settings>algorithm settings I am able to select enable for claymore-dual but it goes back to disabled when I click save, same thing happens in dual mining settings. If I enter hashrates and DCRI and click save it vapes out everything i typed in and goes to default.
Only problem can be your Worker name, use casual names like:
Rig1
RX480_Left
HomeRig
rig001
01
1
April 26, 2017, 07:23:43 AM
hello coinscrow, may I ask you a little help? How to renew my donor tier? I want to take Tier 0, I already sent 0.0044 BTC to minerstat address, its already 1000+ confirmation but my current balance still 0, therefore I can't activate Tier 0. What should I do now?
Thank you in advance.
Thank you in advance.
Yes, i found your transaction. So, i solved your problem, your again Tier 0.
Thank you very much sir..
April 26, 2017, 07:10:35 AM
When Can we expect algo for nvidia ?
Has this question been answered? I seem to be unable to find it. Still a relevant question though. Could you say where other algo's (like Lyra2REv2) are on your roadmap?
i thought i answered it.
within a 1-2 weeks.
i need to add all nvidia supported coins and algos, current price, current exchange, lot of testing, prepare the client to the auto switching. etc.. etc..
need time to this.
I understand. Proper development takes time.
It is better to know it is coming in about 2 weeks then not knowing if / when it's coming. 
April 26, 2017, 07:08:54 AM
When Can we expect algo for nvidia ?
Has this question been answered? I seem to be unable to find it. Still a relevant question though. Could you say where other algo's (like Lyra2REv2) are on your roadmap?
i thought i answered it.
within a 1-2 weeks.
i need to add all nvidia supported coins and algos, current price, current exchange, lot of testing, prepare the client to the auto switching. etc.. etc..
need time to this.
April 26, 2017, 06:54:02 AM
When Can we expect algo for nvidia ?
Has this question been answered? I seem to be unable to find it. Still a relevant question though. Could you say where other algo's (like Lyra2REv2) are on your roadmap?
April 26, 2017, 05:29:04 AM
by the way,
What wallet your using to get payout from this ?
What wallet your using to get payout from this ?
April 26, 2017, 03:40:36 AM
I can access this http://127.0.0.1:3333.
But error is the same problem. I using miningpoolhub and use this config:
WORKER = rig
REMOTE = YES
MINER = algo
CPU = YES
VNC = NO
in my mport: 3333
error:
algo log file doesn't exits
HardwareMonitor log file doesn't exits.
Open HardwareMonitor on taskbar. Options - Remote Web Server - Run
But error is the same problem. I using miningpoolhub and use this config:
WORKER = rig
REMOTE = YES
MINER = algo
CPU = YES
VNC = NO
in my mport: 3333
error:
algo log file doesn't exits
HardwareMonitor log file doesn't exits.
Open HardwareMonitor on taskbar. Options - Remote Web Server - Run
April 26, 2017, 03:14:02 AM
hello coinscrow, may I ask you a little help? How to renew my donor tier? I want to take Tier 0, I already sent 0.0044 BTC to minerstat address, its already 1000+ confirmation but my current balance still 0, therefore I can't activate Tier 0. What should I do now?
Thank you in advance.
Thank you in advance.
Yes, i found your transaction. So, i solved your problem, your again Tier 0.
Hello, I have error this:
"claymore-eth log file doesn't exits"
and this "HardwareMonitor log file doesn't exits"
What is this mean ?
"claymore-eth log file doesn't exits"
and this "HardwareMonitor log file doesn't exits"
What is this mean ?
the node can't reach the claymore miner created webserver.
-mport 3333
http://127.0.0.1:3333 (If you can't open this.. You found the problem)
- disable firewall
- disable antivirus
restart claymore miner after the node.
Hello, I have error this:
"claymore-eth log file doesn't exits"
and this "HardwareMonitor log file doesn't exits"
What is this mean ?
What pools do you support? Do you support miningpoolhub?"claymore-eth log file doesn't exits"
and this "HardwareMonitor log file doesn't exits"
What is this mean ?
The thing is I am using their coin switching port. So how does your software knows the rigs' profit?
Pool support and coin recognize is automatic. So, Yes supports miningpoolhub.
But their switching port no. Use Coin Algo, instead.
April 26, 2017, 02:57:15 AM
Hello, I have error this:
"claymore-eth log file doesn't exits"
and this "HardwareMonitor log file doesn't exits"
What is this mean ?
What pools do you support? Do you support miningpoolhub?"claymore-eth log file doesn't exits"
and this "HardwareMonitor log file doesn't exits"
What is this mean ?
The thing is I am using their coin switching port. So how does your software knows the rigs' profit?
April 26, 2017, 01:28:30 AM
Hello, I have error this:
"claymore-eth log file doesn't exits"
and this "HardwareMonitor log file doesn't exits"
What is this mean ?
"claymore-eth log file doesn't exits"
and this "HardwareMonitor log file doesn't exits"
What is this mean ?
Jump to: