Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 129.

Starsky886

member

Activity: 85

Merit: 10

Quote from: coinscrow on April 17, 2017, 12:07:44 PM

Quote from: Starsky886 on April 17, 2017, 11:58:38 AM

I've got to know something

There's the local and online config of my Claymore-Zec:

Code:

-zpool ssl://us1-zcash.flypool.org:3443
-zwal (hidden voluntarily)
-zpsw x
#-tt 75
#-i 6,4,6,6,6
#-allpools 1
#-a 2
-asm 1
#-di 0134

There's the config.txt of my node:

Code:

ACCESSKEY = (hidden voluntarily)
WORKER = (hidden voluntarily)
REMOTE = YES
MINER = algo
CPU = YES
VNC = NO

Now, when I start my node on my machine, it automaticly start claymore-ZEC and it's mining ZEC, but when I look at the most profitable coin on minerstat.xyz, it says ZDASH is the most profitable coin.
The node is not switching to zdash automaticly.... Why so?

Also, when I start the node, the cpu is not mining and no miners shows up for the cpu even if the option is ''YES'' in the config.txt of the node.

Thank you

enable cpu listing on the dashboard.

zdash, zcl, zec is not supported in algo right now.
i mentioned upper 2-3 post it comes with the next version

Still, all my miners have this error, they are idle and cpu listing is enabled

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Starsky886 on April 17, 2017, 11:58:38 AM

I've got to know something

There's the local and online config of my Claymore-Zec:

Code:

-zpool ssl://us1-zcash.flypool.org:3443
-zwal (hidden voluntarily)
-zpsw x
#-tt 75
#-i 6,4,6,6,6
#-allpools 1
#-a 2
-asm 1
#-di 0134

There's the config.txt of my node:

Code:

ACCESSKEY = (hidden voluntarily)
WORKER = (hidden voluntarily)
REMOTE = YES
MINER = algo
CPU = YES
VNC = NO

Now, when I start my node on my machine, it automaticly start claymore-ZEC and it's mining ZEC, but when I look at the most profitable coin on minerstat.xyz, it says ZDASH is the most profitable coin.
The node is not switching to zdash automaticly.... Why so?

Also, when I start the node, the cpu is not mining and no miners shows up for the cpu even if the option is ''YES'' in the config.txt of the node.

Thank you

enable cpu listing on the dashboard.

zdash, zcl, zec is not supported in algo right now.
i mentioned upper 2-3 post it comes with the next version

Starsky886

member

Activity: 85

Merit: 10

I've got to know something

There's the local and online config of my Claymore-Zec:

Code:

-zpool ssl://us1-zcash.flypool.org:3443
-zwal (hidden voluntarily)
-zpsw x
#-tt 75
#-i 6,4,6,6,6
#-allpools 1
#-a 2
-asm 1
#-di 0134

There's the config.txt of my node:

Code:

ACCESSKEY = (hidden voluntarily)
WORKER = (hidden voluntarily)
REMOTE = YES
MINER = algo
CPU = YES
VNC = NO

Now, when I start my node on my machine, it automaticly start claymore-ZEC and it's mining ZEC, but when I look at the most profitable coin on minerstat.xyz, it says ZDASH is the most profitable coin.
The node is not switching to zdash automaticly.... Why so?

Also, when I start the node, the cpu is not mining and no miners shows up for the cpu even if the option is ''YES'' in the config.txt of the node.

Thank you

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Ambros on April 17, 2017, 11:33:22 AM

I modified the config.txt file properly and I also changed claymore config on the server, but when I run node.exe I receive this error:

Open HardwareMonitor on task bar. Options...

There is a file with this name in the files downloaded, what should I do?

reopen node.exe
open hardware monitor on the task bar and enable web server.

maybe firewall or antivirus block ohm to create web server.

Ambros

hero member

Activity: 653

Merit: 500

I modified the config.txt file properly and I also changed claymore config on the server, but when I run node.exe I receive this error:

Open HardwareMonitor on task bar. Options...

There is a file with this name in the files downloaded, what should I do?

soothaa

hero member

Activity: 1151

Merit: 528

Ohhh I see, I must keep the dual options listed even if I don't plan on using them. Working now, thank you!

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: soothaa on April 17, 2017, 10:32:27 AM

Good morning. This tool looks amazing and I will probably become a donater as soon as I test it out.

I am having a bit of trouble with my initial setup. I have "MINER = algo" set in my config file, I have my addresses and pools set up correctly for MUISC (as it is currently the best as per the algo) (addr: 0xd9c2df92fa5397d5ec0296656b7584a01a295a82, pool: musicoin.nomnom.technology:9999)

I have set the CLAYMORE-DUAL miner set to:
-eworker (WORKER)
-epool (1_COIN_POOL)
-ewal (1_COIN_ADDRESS)
-epsw x
-ethi 7

When I start the node, I get an error in claymore that "(1_COIN_POOL), no port specified!"
What am I configuring wrong to get auto pool switched?

read the faq about how to set up auto switch.
you need to use the full cfg:

Code:

-eworker (WORKER)
-epool (1_COIN_POOL)
-ewal (1_COIN_ADDRESS)
-epsw x
-dpool (2_COIN_POOL)
-dcoin (2_COIN)
-dwal (2_COIN_ADDRESS)
-dpsw x
-mode 0
-dcri (DCRI)
#-allcoins 1

line-by-line copy this. you can add your own parameters after here.
if you want to fix a varible delete (VARIBLE) and use just text.

in algo setting fill in all of your details if you see your most profitable coin in the website the algo will work

soothaa

hero member

Activity: 1151

Merit: 528

Good morning. This tool looks amazing and I will probably become a donater as soon as I test it out.

I am having a bit of trouble with my initial setup. I have "MINER = algo" set in my config file, I have my addresses and pools set up correctly for MUISC (as it is currently the best as per the algo) (addr: 0xd9c2df92fa5397d5ec0296656b7584a01a295a82, pool: musicoin.nomnom.technology:9999)

I have set the CLAYMORE-DUAL miner set to:
-eworker (WORKER)
-epool (1_COIN_POOL)
-ewal (1_COIN_ADDRESS)
-epsw x
-ethi 7

When I start the node, I get an error in claymore that "(1_COIN_POOL), no port specified!"
What am I configuring wrong to get auto pool switched?

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

v2.7.1 BETA
- Corrects an issue when OHM default config file was lost.
- Ewbf-ZEC sync time reduced.
- Ewbf-ZEC now shows actual consumption and hashrate / gpu.
- Network Traffic calculation improved.
- Claymore-Dual Updated to v9.1

Download link on the same place: Software >> Node (Website)
Or AutoUpdate PRESS "A" Button on the node, or run AutoUpdate from Remote Commands.

What's next? v2.8
- Improved Algo
- Config Editor -> You be able to use Varibles on another clients like: claymore-zec. (Auto Replace Pool/Wallet)
- and another improvements..

cryptominer420

sr. member

Activity: 450

Merit: 255

Yes, In the task bar click Open Hardware monitor and under options or something you have to run the webserver something caused the config to change and stopped the web server.

MTJ151

full member

Activity: 221

Merit: 100

All i get is:

  (ERROR)(16/04/2017) You must use the default api port at your miner.
  (ERROR)(16/04/2017) Miner log file doesn't exits.
  (ERROR)(16/04/2017) HardwareMonitor log file doesn't exits.

Over and over!

Assuming this is at least partly due to the bug mentioned in above post?

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Tomorrow i publish an update. v2.7.1
- EWBF Consumption & Hashrate / GPU
- EWBF Reduced sync time
- OHM Config Patch (Miner log file doesn't exits)

Screenshots below.

Currently i'm working on the v2.8
- Imroved Algo (Able to switch between dual mining and another clients) Example ETH+DCR < ZCL, than the miner start mine zcl
and bug fixes.

If anyone have a client related issue, tell me and i fix it maybe today.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Jamievs on April 16, 2017, 02:17:56 PM

So.. I got my first rig up and running now. On my 2nd and 3rd rig I get this:

http://imgur.com/a/Ak37c

What do I do wrong? And what do I do to fix it?

maybe you deleted a key from config.txt

CPU = NO
VNC = NO

or something is missing

Jamievs

sr. member

Activity: 266

Merit: 250

So.. I got my first rig up and running now. On my 2nd and 3rd rig I get this:

http://imgur.com/a/Ak37c

What do I do wrong? And what do I do to fix it?

Jamievs

sr. member

Activity: 266

Merit: 250

Quote from: coinscrow on April 16, 2017, 08:16:03 AM

Quote from: Jamievs on April 16, 2017, 08:00:30 AM

When you want to apply a config "to all rigs" it does not seem to work for me.. Am I the only one?

I just tried, it worked for me? can you more explain your problem?

I was editing on my 2nd worker, did save to all and settings for first worked remained unchanges. That was pretty much it... I will test it later if I have time. I was using Chrome btw

Edit: I retested and now it worked. Must have been a one time glitch.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Jamievs on April 16, 2017, 08:00:30 AM

When you want to apply a config "to all rigs" it does not seem to work for me.. Am I the only one?

I just tried, it worked for me? can you more explain your problem?

Jamievs

sr. member

Activity: 266

Merit: 250

When you want to apply a config "to all rigs" it does not seem to work for me.. Am I the only one?

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Ayers on April 15, 2017, 11:07:17 AM

hey this is a useful tool, but can i remote control also the bios of my rig with this? for now only radmin can do this, or amt kvm which i found here https://www.howtogeek.com/56538/how-to-remotely-control-your-pc-even-when-it-crashes/

Yes, i plan similar for the Linux os.
Now currently only support Software control.

Ayers

legendary

Activity: 2590

Merit: 1022

Leading Crypto Sports Betting & Casino Platform

hey this is a useful tool, but can i remote control also the bios of my rig with this? for now only radmin can do this, or amt kvm which i found here https://www.howtogeek.com/56538/how-to-remotely-control-your-pc-even-when-it-crashes/

cryptominer420

sr. member

Activity: 450

Merit: 255

This issue is completely random for me, only 1 of 3 rigs were affected and it ran with no issues for weeks before the error occurred, This is also my least stable rig so a crash could have broken the configs.

Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 129. (Read 167190 times)