Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 111. (Read 835786 times)
November 30, 2018, 01:16:17 AM
İnstallation :
6) Enable onboard graphics to default (PEG - > IDG)
Not IDG ,
IGD is True
November 29, 2018, 04:32:31 PM
Hi all,
I am trying to investigate one rig, which resets every hour or so. I have 132 restart in few days.
Using 4x AMD Radeon 480 and 1x AMD Radeon 580.
Current OC settings are somewhat conservative:
Core MHz: 1000
Memory MHz: 2000
Core undervolt: 900
Powerstage: 3
Each time system reboots, I lose claymore-eth-v11.9 log file so I don't know what caused reboot. Is there any way to fix this?
I am trying to investigate one rig, which resets every hour or so. I have 132 restart in few days.
Using 4x AMD Radeon 480 and 1x AMD Radeon 580.
Current OC settings are somewhat conservative:
Core MHz: 1000
Memory MHz: 2000
Core undervolt: 900
Powerstage: 3
Each time system reboots, I lose claymore-eth-v11.9 log file so I don't know what caused reboot. Is there any way to fix this?
I had similar issue months ago - I replaced the PSU and RAM - and the problem went away.
Lol, maybe I should replace whole miner? This is software issue, that it doesn't allow me to diagnose hardware in easy way.
I had to write script to redirect tail of log file to separate log file every 15 seconds. Then I read it after reboot and see if it catched anything about GPU error. And I found it, GPU1, always the same, causes reboots and hungs. It was not easy task to do :/ Taking into account my limitation in remote control of the rigs and very hard access to them.
Now I will prepare to replace riser and clean out card, this should help. not replacing half of the miner, for Christ sake....
November 29, 2018, 01:45:13 PM
With all due respects to the developer of smos I think it would be nice of him to consider a reduction in the fee. People that pay more than 0.1$/kwh which most people do are already mining at a loss. Having to pull out another 2$ for every rig just feels kinda sad.
For me I got free electricity and I ll probably still use your software even if the fees double because I m lazy. Just stating an opinion.
For me I got free electricity and I ll probably still use your software even if the fees double because I m lazy. Just stating an opinion.
November 28, 2018, 04:21:25 PM
@tytanick......much much better now, big thx ! 
No Model Core Mem Fan % Temp *C
0 GeForce GTX 1070 1822 3802 51 61
1 GeForce GTX 1070 1949 3802 30 57
2 GeForce GTX 1070 1911 3802 56 61
3 GeForce GTX 1070 1961 3802 60 61
4 GeForce GTX 1070 1974 3802 50 61
5 GeForce GTX 1070 1759 3802 30 57
No Model Core Mem Fan % Temp *C
0 GeForce GTX 1070 1822 3802 51 61
1 GeForce GTX 1070 1949 3802 30 57
2 GeForce GTX 1070 1911 3802 56 61
3 GeForce GTX 1070 1961 3802 60 61
4 GeForce GTX 1070 1974 3802 50 61
5 GeForce GTX 1070 1759 3802 30 57
November 28, 2018, 06:33:05 AM
with -wd 1 -r 1 -epool eu.clo.epool.io:8008 -pool2 us.clo.epool.io:8008 -worker rig1 -ewal MYCLOADDRESS -pass x -coin clo -retrydelay 2
I get this error:
GPU0 t=29C fan=27%, GPU1 t=31C fan=27%, GPU2 t=28C fan=27%, GPU3 t=26C fan=27%, GPU4 t=22C fan=27%
ETH: Connection lost, retry in 2 sec...
ETH: Stratum - connecting to 'eu.clo.epool.io' _50.21.183.73_ port 8008 (unsecure)
ETH: Stratum - Connected (eu.clo.epool.io:8008) (unsecure)
ETH: Authorized
Probably you are trying to mine Ethereum fork. Please specify _-allcoins 1_ or _-allpools 1_ option. Check _Readme_ file for details.
Pool sent wrong data, cannot set epoch, disconnect
ETH: Connection lost, retry in 2 sec...
What I did wrong? Sorry for stupid question - newbie here.
I get this error:
GPU0 t=29C fan=27%, GPU1 t=31C fan=27%, GPU2 t=28C fan=27%, GPU3 t=26C fan=27%, GPU4 t=22C fan=27%
ETH: Connection lost, retry in 2 sec...
ETH: Stratum - connecting to 'eu.clo.epool.io' _50.21.183.73_ port 8008 (unsecure)
ETH: Stratum - Connected (eu.clo.epool.io:8008) (unsecure)
ETH: Authorized
Probably you are trying to mine Ethereum fork. Please specify _-allcoins 1_ or _-allpools 1_ option. Check _Readme_ file for details.
Pool sent wrong data, cannot set epoch, disconnect
ETH: Connection lost, retry in 2 sec...
What I did wrong? Sorry for stupid question - newbie here.
With this works!
-allpools 1 -epool us.clo.epool.io:8008 -eworker rig1 -ewal MYCLOADDRESS -epsw x
Thanks for help
November 28, 2018, 06:21:07 AM
with -wd 1 -r 1 -epool eu.clo.epool.io:8008 -pool2 us.clo.epool.io:8008 -worker rig1 -ewal MYCLOADDRESS -pass x -coin clo -retrydelay 2
I get this error:
GPU0 t=29C fan=27%, GPU1 t=31C fan=27%, GPU2 t=28C fan=27%, GPU3 t=26C fan=27%, GPU4 t=22C fan=27%
ETH: Connection lost, retry in 2 sec...
ETH: Stratum - connecting to 'eu.clo.epool.io' _50.21.183.73_ port 8008 (unsecure)
ETH: Stratum - Connected (eu.clo.epool.io:8008) (unsecure)
ETH: Authorized
Probably you are trying to mine Ethereum fork. Please specify _-allcoins 1_ or _-allpools 1_ option. Check _Readme_ file for details.
Pool sent wrong data, cannot set epoch, disconnect
ETH: Connection lost, retry in 2 sec...
What I did wrong? Sorry for stupid question - newbie here.
I get this error:
GPU0 t=29C fan=27%, GPU1 t=31C fan=27%, GPU2 t=28C fan=27%, GPU3 t=26C fan=27%, GPU4 t=22C fan=27%
ETH: Connection lost, retry in 2 sec...
ETH: Stratum - connecting to 'eu.clo.epool.io' _50.21.183.73_ port 8008 (unsecure)
ETH: Stratum - Connected (eu.clo.epool.io:8008) (unsecure)
ETH: Authorized
Probably you are trying to mine Ethereum fork. Please specify _-allcoins 1_ or _-allpools 1_ option. Check _Readme_ file for details.
Pool sent wrong data, cannot set epoch, disconnect
ETH: Connection lost, retry in 2 sec...
What I did wrong? Sorry for stupid question - newbie here.
November 28, 2018, 05:54:36 AM
Hi there,
Can anybody let me know what miner and syntax I have to choose to start mining CLO (Callisto Network). I have rig with RX580 8Gb. Thanks in advance!
Can anybody let me know what miner and syntax I have to choose to start mining CLO (Callisto Network). I have rig with RX580 8Gb. Thanks in advance!
You should do a bit of Google to find the answer...
CLO I think is Ethash - so the trusty Claymore miner should do the trick.
I did try google-it but didn't find how to syntax should like to be for claymore I find
PhoenixMiner.exe -pool eu.clo.epool.io:8008 -pool2 us.clo.epool.io:8008 -worker WorkerName -wal YourEthWalletAddress -pass x -coin clo -retrydelay 2
But I don't know how to use that information to write syntax in SM.
This is my for ETC
-wd 1 -r 1 -epool ssl://eu1-etc.ethermine.org:5555 -ewal 0x926d4b97e5995cc4049cd1658718d7d1cc2a41.rig1 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333
So can I use something like this:
-wd 1 -r 1 -epool eu.clo.epool.io:8008 -pool2 us.clo.epool.io:8008 -worker rig1 -wal 0x926d4b97e5995cc4049cd1658718d7d1cc2a41 -pass x -coin clo -retrydelay 2
Of course I will put CLO wallet address.
Sorry for bothering but I'm quite new in this.
Maybe it's -ewal, you've deleted "e" from your command line
November 28, 2018, 04:43:09 AM
Hi there,
Can anybody let me know what miner and syntax I have to choose to start mining CLO (Callisto Network). I have rig with RX580 8Gb. Thanks in advance!
Can anybody let me know what miner and syntax I have to choose to start mining CLO (Callisto Network). I have rig with RX580 8Gb. Thanks in advance!
You should do a bit of Google to find the answer...
CLO I think is Ethash - so the trusty Claymore miner should do the trick.
I did try google-it but didn't find how to syntax should like to be for claymore I find
PhoenixMiner.exe -pool eu.clo.epool.io:8008 -pool2 us.clo.epool.io:8008 -worker WorkerName -wal YourEthWalletAddress -pass x -coin clo -retrydelay 2
But I don't know how to use that information to write syntax in SM.
This is my for ETC
-wd 1 -r 1 -epool ssl://eu1-etc.ethermine.org:5555 -ewal 0x926d4b97e5995cc4049cd1658718d7d1cc2a41.rig1 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333
So can I use something like this:
-wd 1 -r 1 -epool eu.clo.epool.io:8008 -pool2 us.clo.epool.io:8008 -worker rig1 -wal 0x926d4b97e5995cc4049cd1658718d7d1cc2a41 -pass x -coin clo -retrydelay 2
Of course I will put CLO wallet address.
Sorry for bothering but I'm quite new in this.
November 28, 2018, 03:24:45 AM
Hi there,
Can anybody let me know what miner and syntax I have to choose to start mining CLO (Callisto Network). I have rig with RX580 8Gb. Thanks in advance!
Can anybody let me know what miner and syntax I have to choose to start mining CLO (Callisto Network). I have rig with RX580 8Gb. Thanks in advance!
You should do a bit of Google to find the answer...
CLO I think is Ethash - so the trusty Claymore miner should do the trick.
November 28, 2018, 02:43:34 AM
Hi there,
Can anybody let me know what miner and syntax I have to choose to start mining CLO (Callisto Network). I have rig with RX580 8Gb. Thanks in advance!
Can anybody let me know what miner and syntax I have to choose to start mining CLO (Callisto Network). I have rig with RX580 8Gb. Thanks in advance!
November 27, 2018, 09:54:01 AM
Auto update v1186:
- improve NVidia fan speed control
- improve exchange information subsystem
- clear cache files with every miner start to prevent stuck problems
- faster startup system on rigs with large numbers of NVidia GPUs
- fix bminer,t-rex parser,dstm parsers
- add FinMiner,ubqminer parsers
- improve t-rex and xmrig-amd parser
- add cuda 10 compatibility detector
- fix issue with rig loosing for ever after local network problem longer than 1 hour
- bminer parser change do API
- update dstm parser
- change xmr-stak parser (enable autostats)
- change xmrig-amd parser to API
- change t-rex parser to API
- add ubqminer parser API
- add loadavg stats (will be displayed in dashboard in near future)
- improve NVidia fan speed control
- improve exchange information subsystem
- clear cache files with every miner start to prevent stuck problems
- faster startup system on rigs with large numbers of NVidia GPUs
- fix bminer,t-rex parser,dstm parsers
- add FinMiner,ubqminer parsers
- improve t-rex and xmrig-amd parser
- add cuda 10 compatibility detector
- fix issue with rig loosing for ever after local network problem longer than 1 hour
- bminer parser change do API
- update dstm parser
- change xmr-stak parser (enable autostats)
- change xmrig-amd parser to API
- change t-rex parser to API
- add ubqminer parser API
- add loadavg stats (will be displayed in dashboard in near future)
November 27, 2018, 06:21:51 AM
added miner
bminer-v10.7.0
Edit:
added also finminer-v2.4.3
bminer-v10.7.0
Edit:
added also finminer-v2.4.3
November 27, 2018, 06:21:31 AM
Something it's wrong in fan speed monitor ! OC only memory by 500 to all cards, power limit 150, target temp = 62, minim fan 30.
No Model Core Mem Fan% Temp *C
0 GTX 1070 1835 3802 76 61
1 GTX 1070 1911 3802 79 61
2 GTX 1070 1911 3802 97 61
3 GTX 1070 1961 3802 77 61
4 GTX 1070 1974 3802 100 63
5 GTX 1070 1771 3802 47 61
OS version: 1185
Kernel version: 4.17.19-smos
Driver version: Nvidia 396.54, Cuda 9.2
Help ?
From what you showed, i do not see problem.No Model Core Mem Fan% Temp *C
0 GTX 1070 1835 3802 76 61
1 GTX 1070 1911 3802 79 61
2 GTX 1070 1911 3802 97 61
3 GTX 1070 1961 3802 77 61
4 GTX 1070 1974 3802 100 63
5 GTX 1070 1771 3802 47 61
OS version: 1185
Kernel version: 4.17.19-smos
Driver version: Nvidia 396.54, Cuda 9.2
Help ?
System tried to get 62 target temp and all gpus have 61.
One has 63 degree and 100% fan, so please explain why do you think that something is wrong ?
....because now I remove the video card with 100% and now show different card with fan 96% !
No Model Core Mem Fan % Temp *C
0 GTX 1070 1923 3802 80 62
1 GTX 1070 1911 3802 96 61
2 GTX 1070 1961 3802 80 62
3 GTX 1070 1974 3802 85 62
4 GTX 1070 1771 3802 36 61
Monitoring temperatures and fan control it's wrong, with msi afterburner same video card = temp. max. 58 and fan 70% to all cards !
Did you tried to set powerlimit on those nvidia cards in simplemining OC settings ?
Also can you write to [email protected] about that issue ?
Please write in that email your rig name which has this problem and ask for me in this email: Tytanick
November 27, 2018, 04:34:26 AM
Something it's wrong in fan speed monitor ! OC only memory by 500 to all cards, power limit 150, target temp = 62, minim fan 30.
No Model Core Mem Fan% Temp *C
0 GTX 1070 1835 3802 76 61
1 GTX 1070 1911 3802 79 61
2 GTX 1070 1911 3802 97 61
3 GTX 1070 1961 3802 77 61
4 GTX 1070 1974 3802 100 63
5 GTX 1070 1771 3802 47 61
OS version: 1185
Kernel version: 4.17.19-smos
Driver version: Nvidia 396.54, Cuda 9.2
Help ?
From what you showed, i do not see problem.No Model Core Mem Fan% Temp *C
0 GTX 1070 1835 3802 76 61
1 GTX 1070 1911 3802 79 61
2 GTX 1070 1911 3802 97 61
3 GTX 1070 1961 3802 77 61
4 GTX 1070 1974 3802 100 63
5 GTX 1070 1771 3802 47 61
OS version: 1185
Kernel version: 4.17.19-smos
Driver version: Nvidia 396.54, Cuda 9.2
Help ?
System tried to get 62 target temp and all gpus have 61.
One has 63 degree and 100% fan, so please explain why do you think that something is wrong ?
....because now I remove the video card with 100% and now show different card with fan 96% !
No Model Core Mem Fan % Temp *C
0 GTX 1070 1923 3802 80 62
1 GTX 1070 1911 3802 96 61
2 GTX 1070 1961 3802 80 62
3 GTX 1070 1974 3802 85 62
4 GTX 1070 1771 3802 36 61
Monitoring temperatures and fan control it's wrong, with msi afterburner same video card = temp. max. 58 and fan 70% to all cards !
November 27, 2018, 01:23:20 AM
Hi all,
I am trying to investigate one rig, which resets every hour or so. I have 132 restart in few days.
Using 4x AMD Radeon 480 and 1x AMD Radeon 580.
Current OC settings are somewhat conservative:
Core MHz: 1000
Memory MHz: 2000
Core undervolt: 900
Powerstage: 3
Each time system reboots, I lose claymore-eth-v11.9 log file so I don't know what caused reboot. Is there any way to fix this?
I am trying to investigate one rig, which resets every hour or so. I have 132 restart in few days.
Using 4x AMD Radeon 480 and 1x AMD Radeon 580.
Current OC settings are somewhat conservative:
Core MHz: 1000
Memory MHz: 2000
Core undervolt: 900
Powerstage: 3
Each time system reboots, I lose claymore-eth-v11.9 log file so I don't know what caused reboot. Is there any way to fix this?
I had similar issue months ago - I replaced the PSU and RAM - and the problem went away.
November 26, 2018, 06:15:46 PM
Hi all,
I am trying to investigate one rig, which resets every hour or so. I have 132 restart in few days.
Using 4x AMD Radeon 480 and 1x AMD Radeon 580.
Current OC settings are somewhat conservative:
Core MHz: 1000
Memory MHz: 2000
Core undervolt: 900
Powerstage: 3
Each time system reboots, I lose claymore-eth-v11.9 log file so I don't know what caused reboot. Is there any way to fix this?
I am trying to investigate one rig, which resets every hour or so. I have 132 restart in few days.
Using 4x AMD Radeon 480 and 1x AMD Radeon 580.
Current OC settings are somewhat conservative:
Core MHz: 1000
Memory MHz: 2000
Core undervolt: 900
Powerstage: 3
Each time system reboots, I lose claymore-eth-v11.9 log file so I don't know what caused reboot. Is there any way to fix this?
November 25, 2018, 05:46:53 PM
Something it's wrong in fan speed monitor ! OC only memory by 500 to all cards, power limit 150, target temp = 62, minim fan 30.
No Model Core Mem Fan% Temp *C
0 GTX 1070 1835 3802 76 61
1 GTX 1070 1911 3802 79 61
2 GTX 1070 1911 3802 97 61
3 GTX 1070 1961 3802 77 61
4 GTX 1070 1974 3802 100 63
5 GTX 1070 1771 3802 47 61
OS version: 1185
Kernel version: 4.17.19-smos
Driver version: Nvidia 396.54, Cuda 9.2
Help ?
From what you showed, i do not see problem.No Model Core Mem Fan% Temp *C
0 GTX 1070 1835 3802 76 61
1 GTX 1070 1911 3802 79 61
2 GTX 1070 1911 3802 97 61
3 GTX 1070 1961 3802 77 61
4 GTX 1070 1974 3802 100 63
5 GTX 1070 1771 3802 47 61
OS version: 1185
Kernel version: 4.17.19-smos
Driver version: Nvidia 396.54, Cuda 9.2
Help ?
System tried to get 62 target temp and all gpus have 61.
One has 63 degree and 100% fan, so please explain why do you think that something is wrong ?
November 24, 2018, 07:50:00 AM
Hi @tytanick
request from our community to add Bismuth miners
For instance - linux
https://github.com/EggPool/EggMinerGpu/releases/tag/4.0.100
I'm available here or on our discord to help for integration if needed.
request from our community to add Bismuth miners
For instance - linux
https://github.com/EggPool/EggMinerGpu/releases/tag/4.0.100
I'm available here or on our discord to help for integration if needed.
November 23, 2018, 06:00:00 AM
Something it's wrong in fan speed monitor ! OC only memory by 500 to all cards, power limit 150, target temp = 62, minim fan 30.
No Model Core Mem Fan% Temp *C
0 GTX 1070 1835 3802 76 61
1 GTX 1070 1911 3802 79 61
2 GTX 1070 1911 3802 97 61
3 GTX 1070 1961 3802 77 61
4 GTX 1070 1974 3802 100 63
5 GTX 1070 1771 3802 47 61
OS version: 1185
Kernel version: 4.17.19-smos
Driver version: Nvidia 396.54, Cuda 9.2
Help ?
No Model Core Mem Fan% Temp *C
0 GTX 1070 1835 3802 76 61
1 GTX 1070 1911 3802 79 61
2 GTX 1070 1911 3802 97 61
3 GTX 1070 1961 3802 77 61
4 GTX 1070 1974 3802 100 63
5 GTX 1070 1771 3802 47 61
OS version: 1185
Kernel version: 4.17.19-smos
Driver version: Nvidia 396.54, Cuda 9.2
Help ?
November 22, 2018, 10:58:25 AM
Added
cryptodredge-v0.11.0
cryptodredge-v0.11.0
Jump to: