[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 157.

mbn99

newbie

Activity: 8

Merit: 0

i can use A4 6300 + RX 580 for mining ? I will have bottleneck?

Sledge0001

full member

Activity: 626

Merit: 159

Quote from: grotoc on May 01, 2018, 10:01:28 AM

Quote from: Rcalin on April 30, 2018, 11:25:32 PM

Quote from: grotoc on April 30, 2018, 09:42:03 AM

Quote from: grotoc on April 30, 2018, 07:33:22 AM

Hi,

I tried "OhGodAnETHlargementPill-r2" with my 6 x 1080ti, but I only went from 35Mh/s to 40Mh/s. Anyone else in my case ?

Mystery solved !
It seems I had a very old version of SimpleMining on this rig since it was running for a very long time. So I flashed a newer version and now I go from 35MH/s to 51Mh/s. Excellent !

Hello,

How did you manage to use OhGodAnETHlargementPill-r2 on smos?

Thanks

1. You need to connect to your rig with ssh.
2. Open a screen with : screen
3. Type : sudo /root/utils/OhGodAnETHlargementPill -revA 0,1,2,3 (where 0, 1, 2, 3 are the ids of the GPU)
4. Detach the screen with : Ctrl + A + D (so it can run in background in the screen)

On step 4 you say it can run in the background screen. Does this mean we need to keep the SSH window open?

Thanks

zerosaku

newbie

Activity: 1

Merit: 0

Hello, i have been using SMOS for many months now. It's been awesome! Very stable and less hassle compared to using windows.

I have encountered issues recently thou. Sometimes overclocking AMD cards doesn't seem to work properly on all the cards. Let's say i set Core to 1080, Memory to 2100. Only 5 out of 8 cards will have the OC Setting.
Even if all video cards the same model/brand its causing this issue. Mixing other AMD models also causes this problem.
After rebooting rig/reload miner via SMOS Site. It still doesn't fix it. The only way to fix it is manually turning off via power supply, then turning on mining rig manually. Then all cards the cards will overclock properly.
Maybe you can check the overclock code and maybe add a "real reboot" command? make the rig restart like a real computer? hard reset (showing the bios screen like restarting on/off a normal pc then detecting the flash drive again).

Check pic:
#1 https://i.imgur.com/CCC08bH.png
#2 https://i.imgur.com/sBG6K94.png

rezin385

newbie

Activity: 12

Merit: 0

So with the new antminer z9 equihash miner coming out I think it would be a great benefit if SMOS could increase the scope of 1080 cards to improve ethereum hashrates with the ethlargement pill code built into SMOS. What are the chances that could happen? Thanks!

soothaa

hero member

Activity: 1151

Merit: 528

When using xmr-stak:

Code:

[2018-05-05 15:17:56] : HTTPD port is enabled but this binary was compiled without HTTP support!

Why? Please compile these with HTTP support.. it's nice for when we want additional monitoring..

fishyfishy

newbie

Activity: 60

Merit: 0

Quote from: jonny51 on May 01, 2018, 04:58:49 PM

Quote from: fishyfishy on May 01, 2018, 02:29:51 PM

Hi All,

I used to mine ETH in December with about 26 Mh/s per card. I switched the rig to mine Cryptonight until few days ago and when I tried switching back to ETH, surprise - maximum 17.5 Mh/s per card!
Anybody has any idea what changed? My cards are having BIOS modded... everything worked ok until now. Cards are RX 570 ASUS Strix 4GB (ROG-STRIX-RX570-4G).
All the time I used simplemining os since the beginning, no change. current version shows 1165

Thanks a lot!

flash SMOS again, probably you have a very old version i guess

Thanks, it did the trick!
After re-flashing with the latest version all cards are back to normal!

muthu1979

newbie

Activity: 35

Merit: 0

Quote from: preda on May 04, 2018, 10:13:20 AM

i did tests with this smos,

i mined eth with 1050 ti doing 15.5mh + mb+ cpu + ram all complete sistem was drawing from the wall 105 watt with smos and usb pendrive 16gb
then i used ssd + windows 10 using claymore 11.7 and mining eth speed 15.8mh and drawing only 78 watt!!!
why smos consuming so much than windows 10?

Hi,

Can i have OC setting for 1050ti giving 15.5mh

As i am getting only 11.1mh

Regards,
Muthu

Sledge0001

full member

Activity: 626

Merit: 159

Quote from: sidscribble on May 04, 2018, 11:09:56 PM

Quote from: Sledge0001 on May 04, 2018, 11:01:33 PM

Quote from: sidscribble on May 04, 2018, 10:49:17 PM

Quote from: Sledge0001 on May 04, 2018, 04:32:11 PM

Anyone else having issues with the fan speeds not spinning up and sticking to their minimum speeds?

I have 2 rigs that seem to be stuck on the minimum fan speed and are heating up considerably as the fan speeds don't seem to be adjusting as one would expect.

I have tried a reboot, different miner software, a newly flashed USB and even deleting the rig and popping a new USB in which just brings back the old settings!!!

Odd....

What cards, brand and and driver version? Also, what are you using to set the fanspeed? Could be several things going on, depending. Some driver versions had issues with fanspeeds for AMD, and I programed fan curves into the bios of my Tahitis, so something might be overriding youre settings. Also, if you're setting fanspeed in the miner group command line (with your miner args) and its getting overridden elsewhere by SMOS, it could cause this. For example if you have -minfanspeed -maxfanspeed, -tt, -ttli, etc. in Claymore's they may be interfering.

Using Claymore V11.7. on GTX 1060's haven't changed anything through SSH. But have tried to set minimum fan speeds but only through the SMOS website / gui...

You might try passing the fanspeed min. argument along with claymore's args. You could use the -ttli argument to make sure temps stay safe while you're trying to figure it out. If there are other software out there to adjust fans for 1060s, maybe give them a shot (or try different/updated or older) drivers. Also, if you've got an infrared thermometer, you might take the temp of the cards and make sure they seem to be reporting correctly. Only other thing I can think of is make sure you're hardware is all straight & you've got enough power going to the rig. As you probably know, low power can cause some strange issues.

Yeah I will try the -ttli 80 addition to keep these puppys under 80... Just scary when I see a GPU reading 96C and fan at 38....

Thanks for the tip.

EDIT: Didn't work... That locked the fans in at the minimum set in the gui… Ughhh

sidscribble

newbie

Activity: 11

Merit: 0

Quote from: Sledge0001 on May 04, 2018, 11:01:33 PM

Quote from: sidscribble on May 04, 2018, 10:49:17 PM

Quote from: Sledge0001 on May 04, 2018, 04:32:11 PM

Anyone else having issues with the fan speeds not spinning up and sticking to their minimum speeds?

I have 2 rigs that seem to be stuck on the minimum fan speed and are heating up considerably as the fan speeds don't seem to be adjusting as one would expect.

I have tried a reboot, different miner software, a newly flashed USB and even deleting the rig and popping a new USB in which just brings back the old settings!!!

Odd....

What cards, brand and and driver version? Also, what are you using to set the fanspeed? Could be several things going on, depending. Some driver versions had issues with fanspeeds for AMD, and I programed fan curves into the bios of my Tahitis, so something might be overriding youre settings. Also, if you're setting fanspeed in the miner group command line (with your miner args) and its getting overridden elsewhere by SMOS, it could cause this. For example if you have -minfanspeed -maxfanspeed, -tt, -ttli, etc. in Claymore's they may be interfering.

Using Claymore V11.7. on GTX 1060's haven't changed anything through SSH. But have tried to set minimum fan speeds but only through the SMOS website / gui...

You might try passing the fanspeed min. argument along with claymore's args. You could use the -ttli argument to make sure temps stay safe while you're trying to figure it out. If there are other software out there to adjust fans for 1060s, maybe give them a shot (or try different/updated or older) drivers. Also, if you've got an infrared thermometer, you might take the temp of the cards and make sure they seem to be reporting correctly. Only other thing I can think of is make sure you're hardware is all straight & you've got enough power going to the rig. As you probably know, low power can cause some strange issues.

Sledge0001

full member

Activity: 626

Merit: 159

Quote from: sidscribble on May 04, 2018, 10:49:17 PM

Quote from: Sledge0001 on May 04, 2018, 04:32:11 PM

Anyone else having issues with the fan speeds not spinning up and sticking to their minimum speeds?

I have 2 rigs that seem to be stuck on the minimum fan speed and are heating up considerably as the fan speeds don't seem to be adjusting as one would expect.

I have tried a reboot, different miner software, a newly flashed USB and even deleting the rig and popping a new USB in which just brings back the old settings!!!

Odd....

What cards, brand and and driver version? Also, what are you using to set the fanspeed? Could be several things going on, depending. Some driver versions had issues with fanspeeds for AMD, and I programed fan curves into the bios of my Tahitis, so something might be overriding youre settings. Also, if you're setting fanspeed in the miner group command line (with your miner args) and its getting overridden elsewhere by SMOS, it could cause this. For example if you have -minfanspeed -maxfanspeed, -tt, -ttli, etc. in Claymore's they may be interfering.

Using Claymore V11.7. on GTX 1060's haven't changed anything through SSH. But have tried to set minimum fan speeds but only through the SMOS website / gui...

sidscribble

newbie

Activity: 11

Merit: 0

Quote from: Sledge0001 on May 04, 2018, 04:32:11 PM

Anyone else having issues with the fan speeds not spinning up and sticking to their minimum speeds?

I have 2 rigs that seem to be stuck on the minimum fan speed and are heating up considerably as the fan speeds don't seem to be adjusting as one would expect.

I have tried a reboot, different miner software, a newly flashed USB and even deleting the rig and popping a new USB in which just brings back the old settings!!!

Odd....

What cards, brand and and driver version? Also, what are you using to set the fanspeed? Could be several things going on, depending. Some driver versions had issues with fanspeeds for AMD, and I programed fan curves into the bios of my Tahitis, so something might be overriding youre settings. Also, if you're setting fanspeed in the miner group command line (with your miner args) and its getting overridden elsewhere by SMOS, it could cause this. For example if you have -minfanspeed -maxfanspeed, -tt, -ttli, etc. in Claymore's they may be interfering.

preda

sr. member

Activity: 756

Merit: 250

Quote from: tytanick on May 04, 2018, 10:36:50 AM

Quote from: preda on May 04, 2018, 10:13:20 AM

i did tests with this smos,

i mined eth with 1050 ti doing 15.5mh + mb+ cpu + ram all complete sistem was drawing from the wall 105 watt with smos and usb pendrive 16gb
then i used ssd + windows 10 using claymore 11.7 and mining eth speed 15.8mh and drawing only 78 watt!!!
why smos consuming so much than windows 10?

Try using lower dpm stage (powerstage level in OC settings)

ofc i did tdp 40

Sledge0001

full member

Activity: 626

Merit: 159

Anyone else having issues with the fan speeds not spinning up and sticking to their minimum speeds?

I have 2 rigs that seem to be stuck on the minimum fan speed and are heating up considerably as the fan speeds don't seem to be adjusting as one would expect.

I have tried a reboot, different miner software, a newly flashed USB and even deleting the rig and popping a new USB in which just brings back the old settings!!!

Odd....

17men

member

Activity: 314

Merit: 19

Hello friend,

I sent you an e-mail, can you please response? I quit mining, and have a deposit inside smos $15, may i get a refund to 0x71b959C89CA613CCE3d7B3270149D919143C1dff ?

Thanks

hashestohashes

newbie

Activity: 63

Merit: 0

The telegram update was the greatest update to ever come across smos, far less checking without a DIY method.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: preda on May 04, 2018, 10:13:20 AM

i did tests with this smos,

i mined eth with 1050 ti doing 15.5mh + mb+ cpu + ram all complete sistem was drawing from the wall 105 watt with smos and usb pendrive 16gb
then i used ssd + windows 10 using claymore 11.7 and mining eth speed 15.8mh and drawing only 78 watt!!!
why smos consuming so much than windows 10?

Try using lower dpm stage (powerstage level in OC settings)

preda

sr. member

Activity: 756

Merit: 250

i did tests with this smos,

i mined eth with 1050 ti doing 15.5mh + mb+ cpu + ram all complete sistem was drawing from the wall 105 watt with smos and usb pendrive 16gb
then i used ssd + windows 10 using claymore 11.7 and mining eth speed 15.8mh and drawing only 78 watt!!!
why smos consuming so much than windows 10?

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Update: dashboard v3050
new menu with vote feature pools
telegram notifications now sends statud with icon
fixed Miner program started date
fixed rig list autoreload after doing some action

bracinac

newbie

Activity: 87

Merit: 0

tytanick, is it possible to add button for enable/disable OhGodETHlargmentPill in "actions" column or in group/miner window?

kemo6600

member

Activity: 130

Merit: 10

Is is really CPU problem ? or it crashed on restart ?

^{[ 6891.180275] perf: interrupt took too long (3138 gt; 3128), lowering kernel.perf_event_max_sample_rate to 63500
[16372.804104] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
[16372.804106] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[16372.805108] CPU0: Package temperature/speed normal
[16372.864925] CPU1: Core temperature/speed normal
[266646.523555] perf: interrupt took too long (3936 gt; 3922), lowering kernel.perf_event_max_sample_rate to 50750
[463061.284154] CPU1: Core temperature above threshold, cpu clock throttled (total events = 5501)
[463061.284155] CPU0: Package temperature above threshold, cpu clock throttled (total events = 6079)
[463061.285155] CPU0: Package temperature/speed normal
[463061.348608] CPU1: Core temperature/speed normal
[463128.105916] NVRM: GPU at PCI:0000:08:00: GPU-af74560f-25a5-8145-0cdf-79e4c8a606d8
[463128.105918] NVRM: GPU Board Serial Number:
[463128.105920] NVRM: Xid (PCI:0000:08:00): 62, 110d(7d6c) 00000000 00000000
[463132.265319] NVRM: Xid (PCI:0000:08:00): 31, Ch 00000000, engmask 00000110, intr 10000000
Rig is rebooting due to system error. It could be caused by too much overclock/undervolt.}

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 157. (Read 835832 times)