Hello people,
I did all instructed to setup simplemining, everything is working until i connected the 6 gpu's(gtx 1080 ti). I get error at beggining: Cannot ioremap video memory.
Then, after like 1 minute of writing "There is no screen to be attached matching miner", i get next errors: http://i63.tinypic.com/efqdz8.jpg.
Someone suggested to reflash the OS?
Thank you!
Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 352. (Read 836197 times)
September 09, 2017, 08:36:55 AM
September 09, 2017, 07:17:22 AM
Stupid question.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.
Turn on UNSAFE mode.
September 09, 2017, 05:56:02 AM
Stupid question.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.
September 08, 2017, 10:11:33 PM
Hi all.
few months everything was good. The other day there was a problem. 2 mine a threshing barn were gone from the RigList list. They work, spheres are sent, but they aren't in the list!!!
now there it is written - No matching records found.
at the same time with peep of "Rig Groups" 2/2 are specified
It lasts already couple of days.
I have checked a config.txt, my mail, all is correct there.
few months everything was good. The other day there was a problem. 2 mine a threshing barn were gone from the RigList list. They work, spheres are sent, but they aren't in the list!!!
now there it is written - No matching records found.
at the same time with peep of "Rig Groups" 2/2 are specified
It lasts already couple of days.
I have checked a config.txt, my mail, all is correct there.
Same to me. Someone repair that?
September 08, 2017, 07:40:33 PM
I got some problem booting An 30 gb SDD , there is any tip?
September 08, 2017, 06:27:51 PM
I can't seem to be able to boot from a pendrive on Gigabyte H110-D3A with above 4G decoding enabled on the Nvidia platform. I'm fairly convinced this is due to Etcher converting to MBR instead of GPT. Any input would be greatly appreciated.
Maybe you missed a step in the BIOS setup for your MoBo. I know I did and had to do it again.
Check under " How to Set BIOS for Mining ?" In this link:
https://www.gigabyte.com/microsite/462/mining.html
Maybe you missed a step in the BIOS setup for your MoBo. I know I did and had to do it again.
Check under " How to Set BIOS for Mining ?" In this link:
https://www.gigabyte.com/microsite/462/mining.html
September 08, 2017, 02:59:24 PM
I can't seem to be able to boot from a pendrive on Gigabyte H110-D3A with above 4G decoding enabled on the Nvidia platform. I'm fairly convinced this is due to Etcher converting to MBR instead of GPT. Any input would be greatly appreciated.
September 08, 2017, 02:24:37 PM
Hi. I set Core MHz: 1375,1375,1200,1200,1200,1200
Memory MHz: 2150,2150,1990,1990,1990,1990 ,
but on dashboard I have:
Core MHz: 1375 1375 1035 1200 1035 1200 (4)
Memory MHz: 2150 2150 1990 1990 1990 1990
Any ideas why? Thanks
Someone? Memory MHz: 2150,2150,1990,1990,1990,1990 ,
but on dashboard I have:
Core MHz: 1375 1375 1035 1200 1035 1200 (4)
Memory MHz: 2150 2150 1990 1990 1990 1990
Any ideas why? Thanks
September 08, 2017, 01:59:15 PM
Is it possible to mine at SMos via Nicehash-X11Gost pool ?
use ccminer v2.1 or the skunk version
tytanick, can you please update ccminer to 2.2.1 version ? Sigt gives only 35 MH/s per 1080ti, but there should be 55 MH/s !
We can`t mine altcoins under SkunkHash algorithm because of this
September 08, 2017, 01:52:41 PM
Is it possible to mine at SMos via Nicehash-X11Gost pool ?
use ccminer v2.1 or the skunk version
tytanick, can you please update ccminer to 2.2.1 version ? Sigt gives only 35 MH/s per 1080ti, but there should be 55 MH/s !
We can`t mine altcoins under SkunkHash algorithm because of this
September 08, 2017, 01:49:44 PM
Guys, is it possible to mine LBRY at Nvidia via SMoS ?
for NVIDIA cards, ccminer v2.1 or skunk version will do LBRY
for AMD cards, use sgminer-gm
September 08, 2017, 10:12:36 AM
I see too many issues whit smOS latetly, I think in gonna give ethOS a try...
September 08, 2017, 07:44:47 AM
September 08, 2017, 07:38:42 AM
XMR !!! PLEASE
I have tried many times for XMR, but no luck.
I use RX570.
Anyone please guide me how to set up XMR mining, SMOS, and pool that pay it into a Poloniex wallet.
I have tried many times for XMR, but no luck.
I use RX570.
Anyone please guide me how to set up XMR mining, SMOS, and pool that pay it into a Poloniex wallet.
xmr-stak-amd
-s xmr-eu2.nanopool.org:14444 -w 44n9J1bUuMQapd1jdPSWEzLxexgLciztUda8Axw2RjLucxenCLxoNGfT8PJ2gtdVC99BfzkUbCNJmjM ScSrvkfNe6YFoZ4D.$rigName/mail -p x -i 1024
September 08, 2017, 06:30:07 AM
Hi,
I'm testing the SMoS for two weeks now, and in the last few days, 2 of 4 rigs, started to crash, and SMoS, could not restart them, so I got the SRR, connected it and configured with the SMoS, for the first rig everything is ok, but with the second one, SRR doesn't restart it.
Even with the SimpleRigResetterTool, TURN OFF function works, but to TURN ON, I have to press it like 5 or 6 times to do the trick.
I'm using SRR v1 & Asrock H110 PRO.
Does anyone have any solution maybe?
Thanks.
D.
I was problem same. I can't remote smos. it's OFF I'm testing the SMoS for two weeks now, and in the last few days, 2 of 4 rigs, started to crash, and SMoS, could not restart them, so I got the SRR, connected it and configured with the SMoS, for the first rig everything is ok, but with the second one, SRR doesn't restart it.
Even with the SimpleRigResetterTool, TURN OFF function works, but to TURN ON, I have to press it like 5 or 6 times to do the trick.
I'm using SRR v1 & Asrock H110 PRO.
Does anyone have any solution maybe?
Thanks.
D.
Please help me.
Thanks !
September 08, 2017, 02:08:03 AM
Hi,
I'm testing the SMoS for two weeks now, and in the last few days, 2 of 4 rigs, started to crash, and SMoS, could not restart them, so I got the SRR, connected it and configured with the SMoS, for the first rig everything is ok, but with the second one, SRR doesn't restart it.
Even with the SimpleRigResetterTool, TURN OFF function works, but to TURN ON, I have to press it like 5 or 6 times to do the trick.
I'm using SRR v1 & Asrock H110 PRO.
Does anyone have any solution maybe?
Thanks.
D.
I'm testing the SMoS for two weeks now, and in the last few days, 2 of 4 rigs, started to crash, and SMoS, could not restart them, so I got the SRR, connected it and configured with the SMoS, for the first rig everything is ok, but with the second one, SRR doesn't restart it.
Even with the SimpleRigResetterTool, TURN OFF function works, but to TURN ON, I have to press it like 5 or 6 times to do the trick.
I'm using SRR v1 & Asrock H110 PRO.
Does anyone have any solution maybe?
Thanks.
D.
September 08, 2017, 12:59:05 AM
Guys, is it possible to mine LBRY at Nvidia via SMoS ?
September 07, 2017, 11:29:07 PM
Hi all.
few months everything was good. The other day there was a problem. 2 mine a threshing barn were gone from the RigList list. They work, spheres are sent, but they aren't in the list!!!
now there it is written - No matching records found.
at the same time with peep of "Rig Groups" 2/2 are specified
It lasts already couple of days.
I have checked a config.txt, my mail, all is correct there.
few months everything was good. The other day there was a problem. 2 mine a threshing barn were gone from the RigList list. They work, spheres are sent, but they aren't in the list!!!
now there it is written - No matching records found.
at the same time with peep of "Rig Groups" 2/2 are specified
It lasts already couple of days.
I have checked a config.txt, my mail, all is correct there.
September 07, 2017, 09:43:44 PM
so how do we do the DAG fix if we have RX580's running on SMOS ?..
Download link:
http://download.simplemining.net/simpleminer-RX-v1118-17.30-dagfix-computekernel.img.zip
Is the DAG fix needed if my miners are running fine? Will this new one improve my hash rate? I am using RX 580 and RX 570
For many, it is an efficiency and hash rate improvement. Check this example:
https://bitcointalksearch.org/topic/m.21572143
I have 12 rx 580 rigs, this beta version don't work at all, just a black screen.
September 07, 2017, 07:29:24 PM
so how do we do the DAG fix if we have RX580's running on SMOS ?..
Download link:
http://download.simplemining.net/simpleminer-RX-v1118-17.30-dagfix-computekernel.img.zip
Is the DAG fix needed if my miners are running fine? Will this new one improve my hash rate? I am using RX 580 and RX 570
For many, it is an efficiency and hash rate improvement. Check this example:
https://bitcointalksearch.org/topic/m.21572143
Jump to: