Author

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 351. (Read 835856 times)

newbie
Activity: 1
Merit: 0
Stupid question.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.

Turn on UNSAFE mode.

Thx, worked like a charm Smiley
this really helped me too, thanks.
sr. member
Activity: 616
Merit: 259
Just simple question about indentify GPUs

gpu0 is always monitor-gpu and after that (gpu1,gpu2,gpu3 etc..) PCIE order?



All right.
full member
Activity: 952
Merit: 156
KOL Manager and CriptoGemas CEO
HI, I've tested the 2 DAGFIX versions located at SMOS download section for my x6 RX 580 8Gb pulse hynix memory and every card has a different hashrate between 18 Mh/s and 28 Mh/s, it's always moving the Mh/s and I finally lose 20 Mh/h between them. It doesn't work for me, anyone has the same cards and its works? Any idea about when the final amd drivers will be released? I get 25.4 Mh/s in dualmining for each card. Thanks.
newbie
Activity: 81
Merit: 0
Just simple question about indentify GPUs

gpu0 is always monitor-gpu and after that (gpu1,gpu2,gpu3 etc..) PCIE order?

member
Activity: 93
Merit: 10
Stupid question.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.

Turn on UNSAFE mode.

Thx, worked like a charm Smiley
member
Activity: 93
Merit: 10
Lol, what a lot of money?
newbie
Activity: 28
Merit: 0
oh boy, your website is so f*** slow man. We pay alot of money, please get yourself some decent servers... its almost ridiculous..
czr
newbie
Activity: 27
Merit: 0
newbie
Activity: 28
Merit: 0
Hello people,
I did all instructed to setup simplemining, everything is working until i connected the 6 gpu's(gtx 1080 ti). I get error at beggining: Cannot ioremap video memory.

Then, after like 1 minute of writing "There is no screen to be attached matching miner", i get next errors: http://i63.tinypic.com/efqdz8.jpg.

Someone suggested to reflash the OS?

Thank you!
legendary
Activity: 1246
Merit: 1024
Stupid question.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.

Turn on UNSAFE mode.
member
Activity: 93
Merit: 10
Stupid question.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.
newbie
Activity: 10
Merit: 0
Hi all.
few months everything was good. The other day there was a problem. 2 mine a threshing barn were gone from the RigList list. They work, spheres are sent, but they aren't in the list!!!
now there it is written - No matching records found.
at the same time with peep of "Rig Groups" 2/2 are specified

It lasts already couple of days.
I have checked a config.txt, my mail, all is correct there.

Same to me. Someone repair that?
full member
Activity: 254
Merit: 100
I got some problem booting An 30 gb SDD , there is any tip?
hero member
Activity: 786
Merit: 1000
I can't seem to be able to boot from a pendrive on Gigabyte H110-D3A with above 4G decoding enabled on the Nvidia platform.  I'm fairly convinced this is due to Etcher converting to MBR instead of GPT.  Any input would be greatly appreciated.
 

Maybe you missed a step in the BIOS setup for your MoBo. I know I did and had to do it again.
 Check under " How to Set BIOS for Mining ?" In this link:

https://www.gigabyte.com/microsite/462/mining.html
member
Activity: 93
Merit: 11
I can't seem to be able to boot from a pendrive on Gigabyte H110-D3A with above 4G decoding enabled on the Nvidia platform.  I'm fairly convinced this is due to Etcher converting to MBR instead of GPT.  Any input would be greatly appreciated.
 
newbie
Activity: 16
Merit: 0
Hi. I set  Core MHz:    1375,1375,1200,1200,1200,1200
            Memory MHz: 2150,2150,1990,1990,1990,1990 ,
but on dashboard I have:
            Core MHz:     1375 1375 1035 1200 1035 1200 (4)
            Memory MHz: 2150 2150 1990 1990 1990 1990
Any ideas why? Thanks Smiley
Someone?
newbie
Activity: 8
Merit: 0
Is it possible to mine at SMos via Nicehash-X11Gost pool ?

use ccminer v2.1 or the skunk version
Thanks!

tytanick, can you please update ccminer to 2.2.1 version ? Sigt gives only 35 MH/s per 1080ti, but there should be 55 MH/s !
We can`t mine altcoins under SkunkHash algorithm because of this Sad
Thank you, lemon! Smiley
newbie
Activity: 8
Merit: 0
Is it possible to mine at SMos via Nicehash-X11Gost pool ?

use ccminer v2.1 or the skunk version
Thanks!

tytanick, can you please update ccminer to 2.2.1 version ? Sigt gives only 35 MH/s per 1080ti, but there should be 55 MH/s !
We can`t mine altcoins under SkunkHash algorithm because of this Sad
legendary
Activity: 1834
Merit: 1080
---- winter*juvia -----
Guys, is it possible to mine LBRY at Nvidia via SMoS ?

for NVIDIA cards, ccminer v2.1 or skunk version will do LBRY

for AMD cards, use sgminer-gm
newbie
Activity: 12
Merit: 0
I see too many issues whit smOS latetly, I think in gonna give ethOS a try...
Jump to: