Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 359. (Read 835503 times)

got eror xmr-stak-amd

============ Starting Miner ===============
0
1
2
3
4
5
6
7
8
[2017-09-03 18:27:22] : JSON config parse error(offset 1690): Missing a name for object member.
Miner ended/crashed. Restarting miner in 10 seconds --------------

thanks dev.. will try..
how about issue with increase watt after use new kernel ?

Can you test it now guys ? It should work ok now.

the clyamore xmr 9.1 is newest miner for linux. There is no newer version that than, only for windows.

Working well ! But with an increase of Watts

before the Fix I had 106MHs for 680W on wall (4 x RX 580) 
with this fix I had 119MHS for 812W on wall

thank you I will have a try on this new version 

Check overclocks. Try to lower then a bit!

Hello! 

I need help .
I have one Rig mining XMR with Nvidia GTX 750 ti 
I can not Overclock my GPU  i make many test but it doesn´t work
my gpu allways work on stock clock speed 
I think it´s a bug in SmOS

can someone tell me if my GPU is damaged or am I missing something here?

I get this code from time to time:


amdgpu  0000:01:00.0: GPU fault detected: 147 0x05a88408
amdgpu  0000:01:00.0:      VM_CONTEXT1_PROTECTION_FAULT_ADDR
amdgpu  0000:01:00.0:      VM_CONTEXT1_PROTECTION_FAULT_STATUS
amdgpu  0000:01:00.0: VM fault (0x08, vmid 3) at page 109227


sometimes GPU 0 fails and the rig reboots.

Hi

I did the following steps:

1 - Stop mining (with a monitor and keyboard attached to the rig do ctrl+c) and exit to console;

2 - At the rig or remote SSH to the rig as root (ssh root@IP_ADDRESS and miner1324 as pass);

3 - wget -qO - http://repo.radeon.com/rocm/apt/debian/rocm.gpg.key | sudo apt-key add - sudo sh -c 'echo deb [arch=amd64] http://repo.radeon.com/rocm/apt/debian/ xenial main > /etc/apt/sources.list.d/rocm.list'

4 - sudo apt-get update

5 - sudo apt-get install rocm

6 - sudo nano  /etc/default/grub

7 - look for this line: GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0 consoleblank=0" or something like this and add "amdgpu.vm_fragment_size=9" at the end like this:
      GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0 consoleblank=0 amdgpu.vm_fragment_size=9"

8 - sudo update-grub

9 - sudo reboot

Thats it!

Hello Dev
can u update claymore cryptonite 9.1 to 9.7

I think we found problem.
Will do the fix very soon.

UPDATE v1121
added claymore-eth-v10.0

I think we found problem.
Will do the fix soon.

Hi tytanick

some news about xmr-stak-amd fail ?

I prefer to mine for my wallet LOL 

Hello, I have a 6 card GTX 1070 rig and due to instability on Windows I decided to switch to SMOS. It is working well, however overclocking is my issue. I'm using the latest version of SMOS.

No matter what I do nothing happens and the cards dont budge from 25-26 MH/s. Does anyone have any suggestions. Thanks.

How can I add manually the dag-fix kernel?

Dude, whats your power limit? mine set at 75w but the rig restarted very hour i guess.

Core: 0
Mem: 1400

The wallet address that xmr stak mines too never changes... Also to mine to an exchange you need to have baseid.paymentid in the wallet address, which also never changes. It mines to your address no matter what you change the address to local and or exchange. The xmr-stak runs just fine, just not to our wallets.

Default
-s xmr-eu1.nanopool.org:14444 -w 42MmCH6p1B3P7BaC3y8KcXayNcKa1jaU9RnUPKFy7SMAJrGrgMajd17WbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm3xUCcQ2.$rigName -p z -i 1024

-s xmr-us-west1.nanopool.org:14444 -w ADDRESS.PAYMENT-ID.WORKER/EMAIL -p x -i 1024
Still mines to your address.
-s xmr-us-west1.nanopool.org:14444 -w ADDRESS.PAYMENT-ID.WORKER -p x -i 1024
Still mines to your address.
-s xmr-us-west1.nanopool.org:14444 -w ADDRESS.WORKER -p x -i 1024
Still mines to your address.

IMO results are different case by case....

The image  simpleminer-RX-v1118_dagfix_computekernel.img.zip didn't work for me in any off my rigs!

The solution was adding the kernel to my v1119 SMOS by hand. But i only had good results in my 480 and 580 cards. My 470 and 570 rigs consumption where off the charts....

Here are my results for the working rigs:

#### RIG 01 ####

6 x (RX480 SAPPHIRE REF 8G --> 1095 2080) --> 890W (148,3W/unid) 157,5mh (26,3mh/unid) | 5,65W/mh
                                                                                950W (158,3W/unid) 172,3mh (28,7mh/unid) | 5,51W/mh (DAG FIX)
#### RIG 02 ####

6 x (RX480 XFX REF 8G --> 1095 2080) --> 910W (151,7W/unid) 157,5mh (26,3mh/unid) | 5,78W/mh
                                                                       960W (160,0W/unid) 172,3mh (28,7mh/unid) | 5,57W/mh (DAG FIX)
#### RIG 03 ####

6 x (RX480 MSI GAMING X 8G --> 1191 2150) --> 885W (147,5W/unid) 162,5mh (27,1mh/unid) | 5.45W/mh
                                                                                 970W (161,7W/unid) 175,0mh (29,2mh/unid) | 5,54W/mh (DAG FIX)

#### RIG 04 ####

2 x (RX480 SAPPHIRE NITRO+ 8G --> 1150 2130)
1 x (RX480 SAPPHIRE NITRO+ 4G --> 1150 1998)
2 x (RX580 SAPPHIRE NITRO+ SE 8G --> 1150 2150) --> 780W (156W/unid) 137.5mh (27,5mh/unid) | 5,67W/mh
                                                                                             890W (178W/unid) 145,8mh (29,2mh/unid) | 6,10W/mh (DAG FIX)
 

Anyone mining on epool.io

My settings are not working with the pool on simpleminingnet....

-wd 1 -r 1 -epool stratum+tcp://uk.etc.epool.io:8008 -ewal wallet/$rigName -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1 -allcoins 1 -dpool stratum+tcp://siamining.com:7777 -dwal wallet/$rigName -dcoin sia -dcri 30


 

i confirmed 15Mh/S more with 7xRX580 NItro + 8GB
BUT ALSO 330W more !!!!!!!