I think i renamed R OS a RX
Let me fix this
Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 362. (Read 835838 times)
September 01, 2017, 03:29:21 PM
Lol i think i made misake and renamed wrong image.
I think i renamed R OS a RX
Let me fix this
I think i renamed R OS a RX
Let me fix this
September 01, 2017, 02:18:49 PM
simpleminer-RX-v1118_dagfix_computekernel.img.zip DIDNT SEE RX580
I can only confirm above. simpleminer-RX-v1118_dagfix_computekernel.img.zip does not work with my rig (RX580 and AsRock H110 Pro BTC+). SEE SCREEN SHOT. It was working fine on simpleminer-RX-v1118-kernel4.11-16.60-noaer.imgSame in my case.
same for me....
-----
BTC
September 01, 2017, 01:43:35 PM
may I check - how can I flash an image onto an SSD drive? the etcher does not see my SSD drive
In options you have to select "Unsafe" mode. You have to be extra careful as you can write to any drive including your boot drive.
thanks
now I am having issues with the OS overclocking - it does not respond to my power limit. any help?
using the one for nvidia on 1080tis
September 01, 2017, 11:20:37 AM
simpleminer-RX-v1118_dagfix_computekernel.img.zip DIDNT SEE RX580
I can only confirm above. simpleminer-RX-v1118_dagfix_computekernel.img.zip does not work with my rig (RX580 and AsRock H110 Pro BTC+). SEE SCREEN SHOT. It was working fine on simpleminer-RX-v1118-kernel4.11-16.60-noaer.imgSame in my case.
September 01, 2017, 10:19:04 AM
may I check - how can I flash an image onto an SSD drive? the etcher does not see my SSD drive
In options you have to select "Unsafe" mode. You have to be extra careful as you can write to any drive including your boot drive.
September 01, 2017, 10:14:01 AM
may I check - how can I flash an image onto an SSD drive? the etcher does not see my SSD drive
September 01, 2017, 09:23:10 AM
What is going on with the block chain drivers and SMOS? What is the current reported hash rate for AMD 470/80?
I am building a few rigs and want to give SMOS a try, but not if I am loosing hash power.
Thanks
I am building a few rigs and want to give SMOS a try, but not if I am loosing hash power.
Thanks
September 01, 2017, 08:52:25 AM
I'm getting such error on H110 Pro BTC
acpi error ae_not_found _SB_.PCI0.XHC_.RHUB.HS11
But only on NV version. On AMD it is ok.
Also on NV version miner and overclock does not apply on start.
acpi error ae_not_found _SB_.PCI0.XHC_.RHUB.HS11
But only on NV version. On AMD it is ok.
Also on NV version miner and overclock does not apply on start.
September 01, 2017, 08:51:00 AM
It supports only 580.
For vega support i will make soon new image with new drivers.
And overclocking is possible? For vega support i will make soon new image with new drivers.
September 01, 2017, 08:42:23 AM
Site down?
Nope, its working ok 
If someone want to use DAGFIX version
http://download.simplemining.net/simpleminer-RX-v1118_dagfix_computekernel.img.zip
Still yes there are problems with too many GPUs. And there is nothing i can do about it.
We still need to wait for AMD to release normal linux driver with this fix so i could install it to normal version of image.
For now this is only solution for linux.
- my rig (4x RX580) was working FINE with simpleminer-RX-v1118-kernel4.11-16.60-noae[Suspicious link removed]g BUT same rig with simpleminer-RX-v1118_dagfix_computekernel.img does not work.
SEE SCREEN SHOT.
I have the same problem
September 01, 2017, 08:19:38 AM
Does it suport AMD (RX 580 or Vega) overclock? Or which AMD driver this distribution uses? Thank you so much.
It supports only 580.For vega support i will make soon new image with new drivers.
H110
Kindly please do not forget about this:
Cant do anything about this one.Kindly please do not forget about this:
The kernel is what it is and some motherboards have problem.
I heard that plugging 8GB RAM solve problem, can you check it ?
Anyway i need fixed driver from amd to make it work on all motherboards
Still no driver, only this strange kernel fix.
September 01, 2017, 08:19:29 AM
I am pretty sure it might have been asked before but I am just going to say it again, is it possible to somewhat implement Nicehash's miner (algo switching with various different algos) into Simple Mining? Also the boot time seemed kinda long. Longer than a clean install of Windows 10, same SSD. Don't know if I did anything wrong.
September 01, 2017, 08:14:31 AM
Does it suport AMD (RX 580 or Vega) overclock? Or which AMD driver this distribution uses? Thank you so much.
It supports only 580.For vega support i will make soon new image with new drivers.
H110
Kindly please do not forget about this:
Cant do anything about this one.Kindly please do not forget about this:
The kernel is what it is and some motherboards have problem.
I heard that plugging 8GB RAM solve problem, can you check it ?
Anyway i need fixed driver from amd to make it work on all motherboards
Still no driver, only this strange kernel fix.
September 01, 2017, 08:11:11 AM
@tytanick
Any information for smos xmr nanopool? Thank you.
Any information for smos xmr nanopool? Thank you.
September 01, 2017, 07:51:52 AM
Does it suport AMD (RX 580 or Vega) overclock? Or which AMD driver this distribution uses? Thank you so much.
September 01, 2017, 07:26:28 AM
@tytanick : any ideas?
Need to answer all emails then i will look into it.I have too much work overdue right now.
Been feeling not so good last 1-2 weeks so my efficiency was fucked
simpleminer-RX-v1118_dagfix_computekernel.img.zip DIDNT SEE RX580
I can only confirm above. simpleminer-RX-v1118_dagfix_computekernel.img.zip does not work with my rig (RX580 and AsRock H110 Pro BTC+). SEE SCREEN SHOT. It was working fine on simpleminer-RX-v1118-kernel4.11-16.60-noaer.img September 01, 2017, 07:23:41 AM
@tytanick : any ideas?
Need to answer all emails then i will look into it.I have too much work overdue right now.
Been feeling not so good last 1-2 weeks so my efficiency was fucked
September 01, 2017, 07:07:48 AM
Is anyone else having problems with the ccminer miners?
When I try using either ccminer-skunk-krnlx or ccminer-tpruvot, I get the following message:
/root/xminer/sh: line 49: 11860 llegal instruction $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------
It does try and restart but comes back with the same message and is in an endless loop.
Any suggestions?
This is the command I have in for ccminer-skunk-krnlx:
-a skunk -o stratum+tcp://yiimp.ccminer.org:8434 -u BAushxUbDYNPj7RbhuPMf3cCBKaEWPsgb5 -p donate
Thank you.
When I try using either ccminer-skunk-krnlx or ccminer-tpruvot, I get the following message:
/root/xminer/sh: line 49: 11860 llegal instruction $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------
It does try and restart but comes back with the same message and is in an endless loop.
Any suggestions?
This is the command I have in for ccminer-skunk-krnlx:
-a skunk -o stratum+tcp://yiimp.ccminer.org:8434 -u BAushxUbDYNPj7RbhuPMf3cCBKaEWPsgb5 -p donate
Thank you.
@tytanick : any ideas?
September 01, 2017, 06:28:13 AM
UPDATE v1120
- added claymore-zec-v12.6
- added xmr-stak-amd
- optimization for faster dashboard response
P.S - i received some reports that Australia has problems accessing dashboard.
I already sent support ticket to cloudflare to check it out.
- added claymore-zec-v12.6
- added xmr-stak-amd
- optimization for faster dashboard response
P.S - i received some reports that Australia has problems accessing dashboard.
I already sent support ticket to cloudflare to check it out.
September 01, 2017, 06:18:50 AM
I can access the dash using a VPN in ireland through Private Internet Access, but of course I cannot manage my rig as it's not registered with the site.
Someone has buggered up our routing
Edit: Must be an issue with Cloudfare or the NZ Vocus handoff to the USA.
Tracing route to www.simplemining.net [104.23.241.254]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms RT-AC5300-1570 [192.168.2.1]
2 14 ms 12 ms 15 ms dsldevice.gateway [192.168.1.100]
3 * * * Request timed out.
4 15 ms 15 ms 14 ms 144.130.220.209
5 15 ms 15 ms 14 ms bundle-ether2.bth-edge901.hobart.telstra.net [203.50.11.170]
6 19 ms 18 ms 17 ms bundle-ether5.bth-core1.hobart.telstra.net [203.50.11.167]
7 27 ms 26 ms 27 ms bundle-ether7.exi-core10.melbourne.telstra.net [203.50.11.20]
8 27 ms 26 ms 26 ms bundle-ether1.lon-edge902.melbourne.telstra.net [203.50.11.112]
9 27 ms 27 ms 26 ms voc1255684.lnk.telstra.net [139.130.110.30]
10 62 ms 62 ms 62 ms bundle-150.cor02.mel11.vic.vocus.net.au [114.31.196.56]
11 62 ms 63 ms 62 ms bundle-104.cor03.syd03.nsw.vocus.net.au [114.31.192.60]
12 63 ms 62 ms 63 ms ten-0-2-0-2.cor01.alb01.akl.vocus.net.nz [114.31.202.84]
13 63 ms 62 ms 62 ms ten-2-2-0.bdr01.akl05.akl.VOCUS.net.nz [114.31.202.43]
14 62 ms 62 ms 63 ms as13335.cust.bdr01.akl05.akl.VOCUS.net.nz [175.45.93.218]
15 62 ms 50 ms 50 ms 104.23.241.254
Trace complete.
Someone has buggered up our routing
Edit: Must be an issue with Cloudfare or the NZ Vocus handoff to the USA.
Tracing route to www.simplemining.net [104.23.241.254]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms RT-AC5300-1570 [192.168.2.1]
2 14 ms 12 ms 15 ms dsldevice.gateway [192.168.1.100]
3 * * * Request timed out.
4 15 ms 15 ms 14 ms 144.130.220.209
5 15 ms 15 ms 14 ms bundle-ether2.bth-edge901.hobart.telstra.net [203.50.11.170]
6 19 ms 18 ms 17 ms bundle-ether5.bth-core1.hobart.telstra.net [203.50.11.167]
7 27 ms 26 ms 27 ms bundle-ether7.exi-core10.melbourne.telstra.net [203.50.11.20]
8 27 ms 26 ms 26 ms bundle-ether1.lon-edge902.melbourne.telstra.net [203.50.11.112]
9 27 ms 27 ms 26 ms voc1255684.lnk.telstra.net [139.130.110.30]
10 62 ms 62 ms 62 ms bundle-150.cor02.mel11.vic.vocus.net.au [114.31.196.56]
11 62 ms 63 ms 62 ms bundle-104.cor03.syd03.nsw.vocus.net.au [114.31.192.60]
12 63 ms 62 ms 63 ms ten-0-2-0-2.cor01.alb01.akl.vocus.net.nz [114.31.202.84]
13 63 ms 62 ms 62 ms ten-2-2-0.bdr01.akl05.akl.VOCUS.net.nz [114.31.202.43]
14 62 ms 62 ms 63 ms as13335.cust.bdr01.akl05.akl.VOCUS.net.nz [175.45.93.218]
15 62 ms 50 ms 50 ms 104.23.241.254
Trace complete.
Jump to: