Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 394. (Read 835832 times)

Probably a non-standard issue here, but I can't figure out what's going on with my networking. Hope someone on this thread has seen some similar behavior...

I have a newly built rig with 13x NV cards on an Asrock H110 Pro BTC+. Everything works for hours until it suddenly dies (crash or hang). Screen turns dark with no disk (flash stick) actyity. When this happens, the NIC on the motherboard (Intel) somehow manages to DDOS my main WiFi router (Asus RT-AC66U) and renders it completely unresponsive until I unplug the cable from this rig. Then it momentarily recovers and everyone's happy. I have four other fast rigs on the same subnet but they are all built on Asus Z270 motherboards and running Win10.

If I plug the patch cord back into this rig while it's still hung, it kills the router again within several seconds or minutes. Tried to put various network switches between the rig and main wifi router and even tried to choke it down with a 100Mb switch. Nothing helps.

Perhaps I should not blame SMOS because this same behavior was originally observed when I was testing nvOC OS on the same motherboard. It was somewhat less reliable and I decided to try SMOS, which I like better overall.

My desperate googling didn't yield much other than one hit on Reddit where someone is reporting same issue with SMOS: https://www.reddit.com/r/EtherMining/comments/6ag7un/simplemining_os_smos_affecting_internetwifi/

Any help will be greatly appreciated but please bear in mind that I don't have much experience with *nix systems :/

-scsi

After some more digging I think I found what I needed.  In case anyone else decides to try out sgminer below is the config I used.

-k ethash -o stratum+tcp://eth-us-east1.nanopool.org:9999 -u "Your_Eth_Wallet" -p x --xintensity 1024 -w 192 -g 1

The above didn't work, my hashrate was showing up and the miner loaded but no shares.  Back to searching the web for me...

Is anyone here using sgminer-gm-5.5.5 with SMOS?

I'd like to try sgminer and see how my hashrate compares when using Claymore, but I don't know the tags well enough to make the changes to the default config file.


--no-submit-stale --kernel cryptonight -o stratum+tcp://mine.moneropool.com:3335 -u 48fRKVUE7g9EyLfhJb3K8hTiEJWY5wQ4ue3fb4TMWeGuipRahVkCsod1BA7kyHQpDK5Hca5KEzMWRLd TtZV26QNtUJupuVx -p x --rawintensity 1008 -w 8 --text-only

Any chance one of the veteran miners could tell me what to change in the above config file to mine ETH at Nanopool with sgminer?

Thanks in advance!

Make sure the onboard video is the primary if you have your monitor attached to it.  Also I've seen many times not to set PEG0 or PEG1, you should use AUTO and have 4G enabled.  Are you able to SSH into the rig?

Anyone have experience what max RX580 can run on simple mining linux?

Hi guys


I have read many entries related to SimpleMining but I do not understand why it does not work.


The miner I want to assemble has the following characteristics:
Motherboard: msi z170a gaming pro carbon
Graphics Cards: 7x Asus Radeon RX570 4GB GDDR5
Microprocessor: Intel Celeron G3900 2.80GHZ
Memory Ram: 2 x Kingston 4GB
Power Source: Corsair RM1000x
7x PCI EXPRESS Risers 16 to 1
OS: SimpleMining inside a 16BG USB

The problem is the following, when I access BIOS (with the latest version 7A12v18) to change the parameter Above 4G memory / Crypto Current mining to enabled I only see the screen in black color.

I have tested it with all the combinations of PEG0 and PEG1 and I do not make it work in any way.

SimpleMining works if no graphics card is connected and the 4G parameter is Dissabled.

I imagine that some parameter of the Bios is not correctly established.
can anybody help me? Thank you in advance.

Make sure you use the slider to adjust the power. Don't manually type it in because it will not work. If you manually type it, the changes won't be applied.

As easy as this

http://imgur.com/JkomQdl

regards

I always use Windows 10 x64 for mining. I m thinking about to use Simple Mining OS because I bought a SRRv2. I know there is 2 USD fee for per rig. No problem. All of my GPUs are NVIDIA. I use EBWF miner.

-How to overclock for GPUs ? I use MSI Afterburner on Windows OS.
-How to change fan speed  of the GPUs ? (I have to use %85 fan speed on one of my rigs.)

Hello.
I have a 8gpu rig with rx 570 strix 4gb OC

But today the 3rd gpu have a one fan off .

Restarted and the 3rd gpu are fixed and the 4 gpu have a one fan off too

And i restarted and i got this screenshot

https://ibb.co/c4dLPa

https://ibb.co/c4dLPa

Thank you

Yes, but you must pay fee for diffrent accounts.

I want to build a second rig, but i want it to mine ethereum to different address. Do i need to make a new email for that or i can configure each rig to mine separate address in the same email account ?

Hi, I’m having problems with stable OC 12xMSI 1060 Hynix on BIOSTAR TB250-BTC PRO in SimpleMining OS.

This cards works stable in Windows at 4200 MHz memory (+400 MSI AB) (6 pcs per rig). But in SimpleMining OS they work stable at 4000 Mhz memory only (+400 at panel). To achieve same 4200Mhz i should set +800 but even at 4050 (+500) rig restarts once per hour.

i'm setting up RX 570 cards on the 6 slot TB250, not the 12 slot model and i use the RX image it's not the case for nvidia cards And I did all he steps like you described with no effect

what are the advantages of this over something like ethOS?

I haven't used the R series, but with the rx series you can usually fix that by changing the clock speeds up or down a bit.  I would try changing them to 925 or 975 and 1475 or 1525.  Basically just play around with the numbers until you find some that work.

I have tried this but then Core/Mem clocks shows just 300 300 300 950 (0) and 300 300 300 1500. Should this work also in this R edition smos?

Just separate the numbers by a comma, no spaces.

For example let's say you want to run GPU0 at 950, GPU1 at 950, GPU2 at 900, and GPU3 at 950 you would enter 950,950,900,950 in the Core MHz field.  Same goes for the Memory.

reading your post again and I assume you are using the NVIDIA smOS image.... looks like you are not 

I have the same board and all 12 x RX470s are working just fine

Since you have GTX-1060 you need this image, NOT the RX ones

https://simplemining.net/download/simpleminer-NV-v1103-kernel4.11.4-nvidia375.66-i915fw.imgc

setup your BIOS with 1 or 2 cards first and enable the Above 6G..., reboot and put in the rest of your cards, reboot ... you should be mining with all 12 cards

Hi, thanks for your advice!

How can I overclock gpus individually?