Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 398. (Read 835499 times)

lower clocks for it
lower intensity for it  

#######################

Now to me

I just started  the new nvidia

2 1080 ti's

ebwt

power at 160 watts
core at    190
memory at 10

Temp 75
fan 70

16gb ram
biostar z170
i5 6400t cpu

getting 609 + 609 = 1218

nicehash reports 1102  sols but they flux

https://new.nicehash.com/miner/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

Hi guys,

I'm mining ETH with Claymore in the Simplemining OS. 6 GPU rig and it reboots every 6/7 minutes. I get the following errors:
GPU fault detected: 146 and GPU fault detected: 147.

I searched online and found out that people got this same error in Claymore on Linux systems and they had to update their software. But this is not possible in Simplemining, am I correct?

How can I fix this problem?

How many at 80/90w? Thanks

MAX I could squeeze was approx 320 per card

Did you know how many sol/s in equihash? thanks

I have the same problem for gtx 1050ti. Same hashrate, even how much values I put.

Has profit been going down here too?  I've been using Nicehash but profit has been almost cut in half the last 2 weeks.  Thanks.

I have a 16 card 1060 setup across 2 identical rigs, works out according to my belkin wemo(recommended as you can reset the power from the cloud, useful for windows/hardlocks) 89w at the wall per card

And the real power consumption is? Thanks

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-17.7.1-Release-Notes.aspx
waiting for Linux

I would investigate the miner you choose to use to see if it is doable, if you choose the claymore option...go check the claymore posts to see, thats how I would approach the issue

Try reading the instructions when you open the oc menu on simplemining.net

Sorry, but does anyone know?

Re the rebooting when dual mining, Id check your script/commandline as well as watch the monitor to gauge what the issue is, 2nd with the OC not holding, I wouldnt touch the OC until it works with no tweaking 1st then tweak the memory as high as you can go in steps(Ideally you would of taken a pic of your settings of your max OC in windows to get a feel for the limits/what good looks like), 2nd I would then tweak the power limit to balance your system draw if power usage at the wall is important to you, over a 24hr period you will need to tweak and adjust the OC on the memory until you find a happy medium with stability/resets

Im rocking nvidia and SMOS is in beta...but damm! A reason as to why Ive choosen SMOS is simply the fact I can check in on any browser and I know that the machine will keep mining and reset/restart ifself when required, there are some great windows options out there but if often they are not as simple as set and forget as many don't have a reboot option built in like what claymore does


To all the noobs like myself, be patient, tweak 1 thing at a time and scribble down some notes, rinse and repeat until the system runs flawless, then you can get back to your life whilst your rig brings in the $$$

A huge lesson Ive learnt is you can spend alot of time chasing a few extra MH whilst you machine is not online earning and locking into a pool as its resetting/restarting all day long no matter what mining OS you are in bed with, or you can be happy at 90% and be online 100% of the time, Ive learnt to settle with the latter vs pushing things to the limit and having a unreliable combination of a mining rig

Im not sure re the 1050's, but Im getting more hash then vs windows on the 1060's

With SimpleMining.net can you mine locally or do you have to mine pools?

Is there a way to have multiple conf files for ewbf? So I change change between Hush, Zcash and zencash easy?

greetings,

I'm using same board and having same problem as well

I did manage to fix PCI error message with that command in boot menu . is there anyway to make this permanent ?

I am interested in tithing some of my profits but would like to automate.  Here are my thoughts...  

• Claymore using dual mode - I do not see setting to allocate 10% resources to a specific pool.  I was thinking that -dcri option would be my best option, but am not sure.
• sgminer using quotas - This would be perfect because I could then allocate 10% to pool_a and 90% to pool_b.  But I am having issues setting up the command line.
• GPU assignment - Not sure if this could be done, but there might be a way to specify a GPU to a specific pool.  This method would work, but since I have 6 GPU's, devoting one GPU to a specific pool to tirhe is more than I wanted (1/6 is about 16%).

Are there any ideas or suggestions for me to accomplish this?

TIA!

does anybody know why i cant go lower?