[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 450.

Shizzle my dizzle

newbie

Activity: 21

Merit: 0

Quote from: crazyivan on May 28, 2017, 04:14:36 AM

Whenever I try to use software out of the books, it does not see my wireless card and does not have internet connection. I assume this is due to Linux-wifi driver issue. Any solution for this, besides going to lan.

Buy another cheap WiFi adapter. The cheapest work out of the box the most times.

mo35

member

Activity: 142

Merit: 10

Quote from: ?? on ??

Quote from: -droid- on May 28, 2017, 03:51:31 AM

Any update on nvidia support? Would love to combine my nvidia rigs with my ETH rigs and make all my rigs simpleminingOS

+1

another one waiting , due latest raise of some coins , i love nvidia rigs more and more.

crazyivan

legendary

Activity: 1652

Merit: 1007

DMD Diamond Making Money 4+ years! Join us!

Whenever I try to use software out of the books, it does not see my wireless card and does not have internet connection. I assume this is due to Linux-wifi driver issue. Any solution for this, besides going to lan.

-droid-

legendary

Activity: 1050

Merit: 1001

Any update on nvidia support? Would love to combine my nvidia rigs with my ETH rigs and make all my rigs simpleminingOS

Vaperdude

newbie

Activity: 5

Merit: 0

Good Day ,

I am new to ming and had the possibility to get 4 x Sapphire RX470's 8GB Grin

Everything i installed but do i need to put the ($) dollarsign in front of the wallet

Like
$XXXXXXXXXXXXX/$XXXXXXX
or
XXXXXXXXXXXXX/XXXXXXXXX

Do i get money when wrong?

Hope you can help me.

Thanks miners

nu1mlock

sr. member

Activity: 378

Merit: 250

I'm having another issue. While my 6x Sapphire RX 570 Pulse Mini's work fine with SimpleMining, it seems that the core overclocking doesn't work.

If I leave it as nothing, it'll run at 1106MHz even though base clock is 1244MHz. It doesn't matter if I change it from the OC settings or directly in the miner config.

Memory clock, however, works just fine to overclock.

Any ideas?

Edit: It looks like it's setting the correct value at boot but then changes back to 1106MHz as soon as it starts mining.

Zimmsquad

member

Activity: 108

Merit: 10

For many of my rigs that I am currently building, the smOS loads fine but then after the miner starts (claymore 9.4) it just sits at:

ETH: 1 pool is specified
Main Ethereum pool is ethermine.org (or whatever the address is)
DCR: 0 pool is specified

It sits there until the computer restarts and then just does it again. Sometimes it will load and start mining though. Any ideas as to why?

PeaMine

hero member

Activity: 979

Merit: 510

Is it possible to do this with Rufus?

nu1mlock

sr. member

Activity: 378

Merit: 250

I do have it set to Gen 1, I'll try setting it to auto in the morning and report back. All other things you suggested is already how I'm set up.

Edit: I tried it before I went to bed yesterday and it's been running great for the last 7 hours, so it seems that it did the trick. Thank you!

vacs03

member

Activity: 63

Merit: 10

Quote from: nu1mlock on May 27, 2017, 05:29:50 PM

I'm having issues getting any proper speeds with SimpleMining.

Without OC but 1500 mem straps my 6 Sapphire RX 570 Pulse Mini are hashing at about 24MH/s ETH + about 470 MH/s SIA each in Windows 10.

However, with SimpleMining I get these weird speeds that fluctuates a lot:

Code:

ETH - Total Speed: 83.507 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:05
ETH: GPU0 2.444 Mh/s, GPU1 14.351 Mh/s, GPU2 23.505 Mh/s, GPU3 14.400 Mh/s, GPU4 14.413 Mh/s, GPU5 14.393 Mh/s
SC - Total Speed: 1670.129 Mh/s, Total Shares: 5, Rejected: 0
SC: GPU0 48.879 Mh/s, GPU1 287.025 Mh/s, GPU2 470.102 Mh/s, GPU3 288.009 Mh/s, GPU4 288.250 Mh/s, GPU5 287.864 Mh/s

Next status update looks like this:

Code:

ETH - Total Speed: 111.903 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:05
ETH: GPU0 13.530 Mh/s, GPU1 23.613 Mh/s, GPU2 24.340 Mh/s, GPU3 24.306 Mh/s, GPU4 2.402 Mh/s, GPU5 23.712 Mh/s
SC - Total Speed: 2238.050 Mh/s, Total Shares: 5, Rejected: 0
SC: GPU0 270.607 Mh/s, GPU1 472.257 Mh/s, GPU2 486.792 Mh/s, GPU3 486.121 Mh/s, GPU4 48.030 Mh/s, GPU5 474.243 Mh/s

Like I said, they all work properly in Windows 10.

I should mention that I'm using the same settings for Claymore in both Windows and SimpleMining of course.

The dashboard also reports some weird numbers for the GPU's:

Code:

300 588 588 588 588 (6)
1000 1000 1000 1750 1000

These also fluctuate up and down and never seems to be stable at all.

Try those settings:
1) Make sure you're running the latest BIOS!
2) Enable 4G
3) Set PCIe support to "Auto" - DO NOT MANUALLY SET TO GEN1. THIS CAUSES MAJOR ISSUES
4) Enable onboard graphics startup as first! I believe this is changing "PEG" to "IGD" or something in the Advanced BIOS
5) Plug your monitor into the ONBOARD graphics

nu1mlock

sr. member

Activity: 378

Merit: 250

I'm having issues getting any proper speeds with SimpleMining.

Without OC but 1500 mem straps my 6 Sapphire RX 570 Pulse Mini are hashing at about 24MH/s ETH + about 470 MH/s SIA each in Windows 10.

However, with SimpleMining I get these weird speeds that fluctuates a lot:

Code:

ETH - Total Speed: 83.507 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:05
ETH: GPU0 2.444 Mh/s, GPU1 14.351 Mh/s, GPU2 23.505 Mh/s, GPU3 14.400 Mh/s, GPU4 14.413 Mh/s, GPU5 14.393 Mh/s
SC - Total Speed: 1670.129 Mh/s, Total Shares: 5, Rejected: 0
SC: GPU0 48.879 Mh/s, GPU1 287.025 Mh/s, GPU2 470.102 Mh/s, GPU3 288.009 Mh/s, GPU4 288.250 Mh/s, GPU5 287.864 Mh/s

Next status update looks like this:

Code:

ETH - Total Speed: 111.903 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:05
ETH: GPU0 13.530 Mh/s, GPU1 23.613 Mh/s, GPU2 24.340 Mh/s, GPU3 24.306 Mh/s, GPU4 2.402 Mh/s, GPU5 23.712 Mh/s
SC - Total Speed: 2238.050 Mh/s, Total Shares: 5, Rejected: 0
SC: GPU0 270.607 Mh/s, GPU1 472.257 Mh/s, GPU2 486.792 Mh/s, GPU3 486.121 Mh/s, GPU4 48.030 Mh/s, GPU5 474.243 Mh/s

Like I said, they all work properly in Windows 10.

I should mention that I'm using the same settings for Claymore in both Windows and SimpleMining of course.

The dashboard also reports some weird numbers for the GPU's:

Code:

300 588 588 588 588 (6)
1000 1000 1000 1750 1000

These also fluctuate up and down and never seems to be stable at all.

FgKcN

newbie

Activity: 1

Merit: 0

Has anyone tried running 4GB and 8GB cards on the same rig using SMOS? I have 5x RX470 8GB cards and one 4GB, all from the same brand. The system works perfectly fine with 8GB cards, but when I add the 4GB card the system boots up and recognizes all 6 cards, then suddenly shuts down when mining is about to start.

vacs03

member

Activity: 63

Merit: 10

Quote from: Okrim on May 27, 2017, 03:27:25 AM

Hello. Can somebody help me to solve my issue. When I have my rig connected to TV via hdmi it starts as it should. But I need it to run without being connected to TV. When I start it without using hdmi, it does not start mining or it does not overclock properly. Do you have similiar experienc?
Thanks for any answer.

in bios set integrated gpu as default...I had the same issue, if it diesn't help buy a hdmi dummy

crypticj

sr. member

Activity: 873

Merit: 268

Quote from: BrokenMiner on May 27, 2017, 05:22:35 AM

Quote from: crypticj on May 27, 2017, 03:37:31 AM

Quote from: BrokenMiner on May 27, 2017, 01:15:55 AM

Hey everyone,

New to the mining game here and having an issue I'm hoping the community can help me with. I've searched the web and the forums to see if I can find a solution but no luck so far.

So here is my current situation

I have 3 rigs running SimpleMiningOS - RX Series to single mine ETH. 1 rig has 2 RX570s and 2 rigs each have 4 RX570s.
Everything is running great until I try to put a 5th RX570 in either of the rigs already running 4.
Once I put the 5th card in the OS takes MUCH longer to load and when the miner finally loads it fails to mine and I get the following message "No AMD OPENCL or NVIDA CUDA GPUs found, exit."

The main rig I would like to add the 5th card to is an ASUS motherboard, z170 chipset i7 CPU, 8GB of RAM, and a 1000W PSU. I have tried the RX series version of the SimpleMining OS and the z170 version with identical results.

Below is a list of solutions I have tried from reading other posts and just general guessing on possible solutions.

1. Swapping video cards. From the 11 cards I have, I have tried MANY different combinations of cards and got the same result; it works fine with 4 GPUs and fails with 5.
2. Putting each riser on it's own line from the PSU.
3. Switching between SimpleMining RX OS and SimpleMining RX z170 series OS
4. The board has 6 PCIe slots and I've tried every combination of using 5 of the 6 slots.
5. Increased the RAM to 32GB, just because I had the RAM already.
6. Putting all cards on risers and only 1 card directly on the motherboard.

Because the issue seems to surface while the OS is attempting to load I'm guessing the issue might be the motherboard or software but because the issue is happening with my other rig as well, an AMD CPU setup, I'm hesitant to believe both motherboards have the same issue. Has anyone else seen this issue, and hopefully a fix?

Thanks in advance for any help or information I can get.

EDIT - Also, I've tried going back to the original bios just to see if I could get the system to boot normally and get into the miner with 5 GPUS, it didn't work.

I had a similar issue with z170 there is a differrent version specifically made for it.

go to: https://simplemining.net/download/

download following images:
[ ] simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc 2017-04-29 20:25 1.0G
[ ] simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc 2017-04-29 20:28 1.0G

I think the second one worked for me, but you should try them both. They are specifically design for z170. good luck.

Edit: I am assuming you have already updated bios for z170a and also enabled 4g decoding?

Thank you! Thank you! Thank you a million times!

I am very new to this and had no idea what 4g decoding was or that I needed to enable it, I've seen it mentioned here and there but never knew what it was. After your suggestion I looked it up and sure enough that fixed my issue! I probably spent 10 hours working on this issue today before posting here. Now I wish I would have asked sooner. Thank you so very much crypticj!!!!

You want to hear a funny story? I spent over 20+ hours dealing with the same issue, but not only i had 4G decoding not done correctly I had a bad GPU that would lock up "mutex lock" and crash the rig couldn't figure out it was that bad gpu and finally i got everything working and the Onboard LAN gave out so i had to RMA the motherboard. I am glad i was able to help, i got a lot of help from a lot of members and tytanick welcome to the bitcointalk. I am glad your issue was resolved.

Sequoia93

member

Activity: 116

Merit: 10

Quote from: citronick on May 27, 2017, 04:49:03 AM

Quote

I had a similar issue with z170 there is a differrent version specifically made for it.

go to: https://simplemining.net/download/

download following images:
[ ] simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc 2017-04-29 20:25 1.0G
[ ] simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc 2017-04-29 20:28 1.0G

I think the second one worked for me, but you should try them both. They are specifically design for z170. good luck.

Edit: I am assuming you have already updated bios for z170a and also enabled 4g decoding?

MSI-Gaming-M5... yet another 7 x PCI slot potential ideal mining mobo
https://www.newegg.com/Product/Product.aspx?Item=N82E16813130873

I got this for awhile with the normal RX smOS images but after a reboot -- screen goes blank....

It is a older Z170 board and currently downloading the above images and try again.

Anyone knows which motherboard did Tytanick tested smOS on for the Z170 images above?

Tytanick has not tested a z170 board himself. The instructions he gave come from user @soothaa earlier in the thread. Soothaa used the same M5 board you've pictured, a friend of mine also has the M5 board running 7 GPUs in smOS.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: Toxicable on May 27, 2017, 06:33:51 AM

Quote from: tytanick on May 27, 2017, 06:32:03 AM

Quote from: Toxicable on May 27, 2017, 06:01:30 AM

Hey im trying to use Powerstage but it simply isnt doing anything, I turned it down to 0 and nothing changed, same wattacge at the wall, kept minig as usual.
Rx470's Nitro+ x7 no flashes or other OC's

This is experimental function and doesnt work with some gpus Sad

Unfortunate, but fair enough. Do you mind if I ask what it does internally? is it just adjusting the core voltage?

More less.
It is my own idea how to make undrervoltin easy (at least on some gpus)
As you know gpu had 0,1,2,3,4,5,6,7 dpm states and each dpm has own voltage and MHz speed.
Now i am trying to force some defined core speed on lower dpm state to achieve simple undervolting.
This works on mine RX470 with custom offset bios. Many people say taht this is also working on stock bioses but some (also big part) says that it isnt working.
So yes, its an undervolting but anyway the best way to have undervolted gpu is to add voltage offset to gpu or use compatible bios from other gpu that has already programmed offset

Also,m is anyone tested those bioses ?
anorak.tech/t/anoraks-vbios-collection-optimized-settings-for-performance-power-saving/13
Do they work under Linux (simpleMining OS ?) - are power savings work ?

Toxicable

newbie

Activity: 53

Merit: 0

Quote from: tytanick on May 27, 2017, 06:32:03 AM

Quote from: Toxicable on May 27, 2017, 06:01:30 AM

Hey im trying to use Powerstage but it simply isnt doing anything, I turned it down to 0 and nothing changed, same wattacge at the wall, kept minig as usual.
Rx470's Nitro+ x7 no flashes or other OC's

This is experimental function and doesnt work with some gpus Sad

Unfortunate, but fair enough. Do you mind if I ask what it does internally? is it just adjusting the core voltage?

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: Toxicable on May 27, 2017, 06:01:30 AM

Hey im trying to use Powerstage but it simply isnt doing anything, I turned it down to 0 and nothing changed, same wattacge at the wall, kept minig as usual.
Rx470's Nitro+ x7 no flashes or other OC's

This is experimental function and doesnt work with some gpus Sad

Toxicable

newbie

Activity: 53

Merit: 0

Hey im trying to use Powerstage but it simply isnt doing anything, I turned it down to 0 and nothing changed, same wattacge at the wall, kept minig as usual.
Rx470's Nitro+ x7 no flashes or other OC's

BrokenMiner

newbie

Activity: 37

Merit: 0

Quote from: crypticj on May 27, 2017, 03:37:31 AM

Quote from: BrokenMiner on May 27, 2017, 01:15:55 AM

Hey everyone,

New to the mining game here and having an issue I'm hoping the community can help me with. I've searched the web and the forums to see if I can find a solution but no luck so far.

So here is my current situation

I have 3 rigs running SimpleMiningOS - RX Series to single mine ETH. 1 rig has 2 RX570s and 2 rigs each have 4 RX570s.
Everything is running great until I try to put a 5th RX570 in either of the rigs already running 4.
Once I put the 5th card in the OS takes MUCH longer to load and when the miner finally loads it fails to mine and I get the following message "No AMD OPENCL or NVIDA CUDA GPUs found, exit."

The main rig I would like to add the 5th card to is an ASUS motherboard, z170 chipset i7 CPU, 8GB of RAM, and a 1000W PSU. I have tried the RX series version of the SimpleMining OS and the z170 version with identical results.

Below is a list of solutions I have tried from reading other posts and just general guessing on possible solutions.

1. Swapping video cards. From the 11 cards I have, I have tried MANY different combinations of cards and got the same result; it works fine with 4 GPUs and fails with 5.
2. Putting each riser on it's own line from the PSU.
3. Switching between SimpleMining RX OS and SimpleMining RX z170 series OS
4. The board has 6 PCIe slots and I've tried every combination of using 5 of the 6 slots.
5. Increased the RAM to 32GB, just because I had the RAM already.
6. Putting all cards on risers and only 1 card directly on the motherboard.

Because the issue seems to surface while the OS is attempting to load I'm guessing the issue might be the motherboard or software but because the issue is happening with my other rig as well, an AMD CPU setup, I'm hesitant to believe both motherboards have the same issue. Has anyone else seen this issue, and hopefully a fix?

Thanks in advance for any help or information I can get.

EDIT - Also, I've tried going back to the original bios just to see if I could get the system to boot normally and get into the miner with 5 GPUS, it didn't work.

I had a similar issue with z170 there is a differrent version specifically made for it.

go to: https://simplemining.net/download/

download following images:
[ ] simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc 2017-04-29 20:25 1.0G
[ ] simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc 2017-04-29 20:28 1.0G

I think the second one worked for me, but you should try them both. They are specifically design for z170. good luck.

Edit: I am assuming you have already updated bios for z170a and also enabled 4g decoding?

Thank you! Thank you! Thank you a million times!

I am very new to this and had no idea what 4g decoding was or that I needed to enable it, I've seen it mentioned here and there but never knew what it was. After your suggestion I looked it up and sure enough that fixed my issue! I probably spent 10 hours working on this issue today before posting here. Now I wish I would have asked sooner. Thank you so very much crypticj!!!!

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 450. (Read 835481 times)