Something too jumps the fan speed. But 75 degrees is holding.
Sorry Google transliteration
Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 568. (Read 834579 times)
November 14, 2016, 05:20:06 PM
November 14, 2016, 05:01:49 PM
i just made a donation since I think that this concept is great. The thing does work and I didn't even plug the monitor in order to get it running. It definitely needs more polishing though.
November 14, 2016, 04:59:39 PM
Guys ... really nobody downloaded update that i made v1031 and howto is above ?
Really ?
anyway i perfected Temperature Algho
https://tytanick-gmail.tinytake.com/sf/MTExODkyNF80NDI3Mzgx
Really ?
anyway i perfected Temperature Algho
https://tytanick-gmail.tinytake.com/sf/MTExODkyNF80NDI3Mzgx
November 14, 2016, 04:18:28 PM
i tryed to install the simplemining and:
1) download the os
2) burned it into a usb pendrive
3) reboot from pendrive
4) got this print:
http://prntscr.com/d7a8ja
what is wrong?
1) download the os
2) burned it into a usb pendrive
3) reboot from pendrive
4) got this print:
http://prntscr.com/d7a8ja
what is wrong?
November 14, 2016, 03:46:58 PM
Hehe, my alghoritm isnt perfect and looks like this 
I will try to perfect it.
https://tytanick-gmail.tinytake.com/sf/MTExODgwMF80NDI3MDEx
I will try to perfect it.
https://tytanick-gmail.tinytake.com/sf/MTExODgwMF80NDI3MDEx
Perfection has no limits. =)
November 14, 2016, 03:29:16 PM
Hehe, my alghoritm isnt perfect and looks like this
I will try to perfect it.
https://tytanick-gmail.tinytake.com/sf/MTExODgwMF80NDI3MDEx
I will try to perfect it.
https://tytanick-gmail.tinytake.com/sf/MTExODgwMF80NDI3MDEx
November 14, 2016, 03:01:06 PM
Tytanick, thank you for perfect job!
I have 6 x RX 480 sapphire rig.
Total 735 sol/s, perfect
Temperature about 74-78 c.
I have 6 x RX 480 sapphire rig.
Total 735 sol/s, perfect
Temperature about 74-78 c.
November 14, 2016, 02:10:36 PM
Optiminer overheating problem workaround:
While Tytanick almost done with R1031 I found a workaround - you can run claymore custom (dualminer), and after you change back to optiminer rigs will keep low temp BUT only till hard reboot.
I tested it with dwarf EXP params if it's important.
While Tytanick almost done with R1031 I found a workaround - you can run claymore custom (dualminer), and after you change back to optiminer rigs will keep low temp BUT only till hard reboot.
I tested it with dwarf EXP params if it's important.
November 14, 2016, 02:01:41 PM
guys i need few beta testers 
I think that i will try to make "BETA UPDATE" button in future but now i need manual testers:
As now i have UPDATE v1031 pending.
When few users will test it then i will upload to all users.
Changelog:
- fan script for R OS (for the first time)
- fan script for RX OS (little change)
- ability to set target temperature 30-80 C
- ability to set minimum fan speed 20-100%
- optiminer bin fix and miner loop that will run miner again if it will end working.
What to do:
Apply update, and test how fan speed works (you can change those parameters in rig settings)
If you know how to login via ssh to your rig and you want to test newest update then here is how:
#You need to run "bash <(curl -s https://simplemining.net/update/1031/update.sh.prep)" as root, so:
Passwrod for user miner is: miner
I think that i will try to make "BETA UPDATE" button in future but now i need manual testers:
As now i have UPDATE v1031 pending.
When few users will test it then i will upload to all users.
Changelog:
- fan script for R OS (for the first time)
- fan script for RX OS (little change)
- ability to set target temperature 30-80 C
- ability to set minimum fan speed 20-100%
- optiminer bin fix and miner loop that will run miner again if it will end working.
What to do:
Apply update, and test how fan speed works (you can change those parameters in rig settings)
If you know how to login via ssh to your rig and you want to test newest update then here is how:
#You need to run "bash <(curl -s https://simplemining.net/update/1031/update.sh.prep)" as root, so:
Passwrod for user miner is: miner
Code:
ssh miner@IP_ADDRESS
sudo su
bash <(curl -s https://simplemining.net/update/1031/update.sh.prep)
November 14, 2016, 12:35:10 PM
Great job!
Finished 48 hours test on zcash whit no down time.
My pro and con
PRO
Fast install on usb;
Web acces and config;
Easy to config;
All miners for profitabile coins are already there and up to date.
CON
Fan speed control on zcash ( in future version i am sure it will be );
3 minutes boot ( 4$ 16G usb drive - probably that is why it takes that much).
Some results then:
optiminer zcash
all stock bios and settings
r9 290 ~ 120 h/s
r9 380x ~ 80 h/s
my test rig
2x 290 + 2x 380x ~ 410 h/s
keep up the great work.
For the users : dont forget do donate if we want the project to evolve.
Finished 48 hours test on zcash whit no down time.
My pro and con
PRO
Fast install on usb;
Web acces and config;
Easy to config;
All miners for profitabile coins are already there and up to date.
CON
Fan speed control on zcash ( in future version i am sure it will be );
3 minutes boot ( 4$ 16G usb drive - probably that is why it takes that much).
Some results then:
optiminer zcash
all stock bios and settings
r9 290 ~ 120 h/s
r9 380x ~ 80 h/s
my test rig
2x 290 + 2x 380x ~ 410 h/s
keep up the great work.
For the users : dont forget do donate if we want the project to evolve.
November 14, 2016, 11:01:37 AM
Only hard reset helps (in my case) against WARN [stratum] Got work but have no extranonce!
but not OC param change
waiting for implementation )
also might be a good idea to leave previous miner version when the new is out - like stable/tested VS experimental/alpha
but not OC param change
waiting for implementation )
also might be a good idea to leave previous miner version when the new is out - like stable/tested VS experimental/alpha
There is a known issue with the miner not properly supporting extranonce protocol. Will be corrected next update.
November 14, 2016, 10:38:21 AM
Only hard reset helps (in my case) against WARN [stratum] Got work but have no extranonce!
but not OC param change
waiting for implementation )
also might be a good idea to leave previous miner version when the new is out - like stable/tested VS experimental/alpha
but not OC param change
waiting for implementation )
also might be a good idea to leave previous miner version when the new is out - like stable/tested VS experimental/alpha
November 14, 2016, 10:28:57 AM
One idea.
if u made a script to set fan target temp in website u can create one for monitoring temp too?
ex:For people who have many rigs for easy monitoring.
target temp 85° or above red indicator.
target temp 85° or below green indicator.
if u made a script to set fan target temp in website u can create one for monitoring temp too?
ex:For people who have many rigs for easy monitoring.
target temp 85° or above red indicator.
target temp 85° or below green indicator.
Yes in some time i will do it - dont know when
November 14, 2016, 09:23:48 AM
I am download again the miner from source.
Del miner dir and Mv New miner to /root/miner and restart. Work fine.
My error is in X_round0.bin
@tytanick
I update v1019 to lastest and get error above. File round0 bin in OptiminerZcash file is missed
Please wait for v1031 - when i release it - you can check again
November 14, 2016, 08:36:37 AM
Next update should solve this and also read error of round.bin in optiminer.
Sometimes update doenst overwrite files, i dont know why..
Need few more hours, implementing fan controll
November 14, 2016, 08:24:01 AM
November 14, 2016, 08:21:49 AM
oh i see... Yep web miner console works fine. I wanted to wach it on putty, but ok.
November 14, 2016, 08:03:41 AM
hmmm so something is not right, "screen -x miner" doesn't show any miner (Optiminer-zcash CUSTOM), same in web pannel, there is empty field on "mining speed" , maybe optiminer-zcash isn't properly configure ... however in process list optiminer show his data "22666 pts/9 Sl+ 201:11 /root/miner/optiminer-zcash/optiminer-zcash -s ................ -u ................ -p x " .
In mining speed field you can only see speeds when you are using Claymore.
Rest miners are unsupported becasue they dont have API.
Only console.
lok here: - > https://tytanick-gmail.tinytake.com/sf/MTExNzg4MF80NDI0NjYx
If still its a problem please send me rig number and your email to [email protected]
November 14, 2016, 07:37:58 AM
hmmm so something is not right, "screen -x miner" doesn't show any miner (Optiminer-zcash CUSTOM), same in web pannel, there is empty field on "mining speed" , maybe optiminer-zcash isn't properly configure ... however in process list optiminer show his data "22666 pts/9 Sl+ 201:11 /root/miner/optiminer-zcash/optiminer-zcash -s ................ -u ................ -p x " .
November 14, 2016, 07:18:33 AM
hi, I use zec optiminer , how to show miner status under putty console ? it should be "screen " with some command....?
You can watch console from dashboard with 10 second refresh time.
If you want to do this from ssh:
this will list avilable screens: screen -x
miner console: screen -x miner
to exit from screen and not kill it: ctrl+a+d (three keys at the same time)
Jump to: