Just need few more days, i have some jobs to do beside simplemining.
And i also saw that my 2GB gpus stopped mining
so this day arelady came ? 
Time to sell them / change to zec on decond email
Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 565. (Read 835818 times)
November 23, 2016, 05:15:36 AM
yeah reboot i will do next.
Just need few more days, i have some jobs to do beside simplemining.
And i also saw that my 2GB gpus stopped mining so this day arelady came ?
Time to sell them / change to zec on decond email
Just need few more days, i have some jobs to do beside simplemining.
And i also saw that my 2GB gpus stopped mining
so this day arelady came ? Time to sell them / change to zec on decond email
November 22, 2016, 04:09:11 PM
Why there is no "reboot" miner under pannel option ? sometimes somebody doesn't has acces via putty, and very often simple failed with detect gpu when change pool etc. And then reload rig won't help, only reboot....
Yeah, I also wish he'd give us a reboot option, can't be that difficult with his linux skills. I'm only about 1 km away from most of my rigs, but it can be a pain to run over and come back because one video card is misbehaving.
November 22, 2016, 03:57:39 PM
Why there is no "reboot" miner under pannel option ? sometimes somebody doesn't has acces via putty, and very often simple failed with detect gpu when change pool etc. And then reload rig won't help, only reboot....
November 22, 2016, 09:54:59 AM
Hey OP is it possible to mine 1 rig on zec and a second rig on eth?
I got 2 gb gpu that will soon no more be able to mine eth.
Let me know!
Edit: Or let us add this to the config file :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Thanks
am not op, but the only way to do what you want is to use 2 different email addresses to manage your rigs. I believe he's got the "setx" commands already set in the os. I got 2 gb gpu that will soon no more be able to mine eth.
Let me know!
Edit: Or let us add this to the config file :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Thanks
November 22, 2016, 12:46:05 AM
Hey OP is it possible to mine 1 rig on zec and a second rig on eth?
I got 2 gb gpu that will soon no more be able to mine eth.
Let me know!
Edit: Or let us add this to the config file :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Thanks
I got 2 gb gpu that will soon no more be able to mine eth.
Let me know!
Edit: Or let us add this to the config file :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Thanks
November 21, 2016, 03:06:50 PM
I also just started running your software and think its easy to setup and my rig seems pretty stable, this is going to sound dumb but found your software after I burnt out my hard drive kinda glad I did, I also tried pimp and was having problems so great job with simplemining. Anyway I also have 290s mixed with 280s and 270s is there anyway we can set separate clocks like 1050,1100,1075 etc and the last question is there anyway to add wolfos sgminer-gm with eth and xmr support I just like options and was having good rates with eth sgminer and wanted to run xmr sgminer but there was no windows release if you have time to check it out https://bitcointalksearch.org/topic/genesis-mining-presents-sgminer-gm-now-with-zawawas-gg-updated-17012017-1612329 outside of that Thank You
November 20, 2016, 04:33:25 PM
I just tested this on one of my rigs. Worked OK, but my only gripe is that I can't set target temp higher than 80. I usually run my 290s at 89 to keep the fan speeds down - otherwise they're too loud.
I will update soon to set more than 80 C. Meaby max of 90 C
Hey!
could you implent a option to disable this target temperature option?
because i do not have fans, got a watercooled system.
thanks
I think i wont do that, most people have fans and disabling fans would have bad results.could you implent a option to disable this target temperature option?
because i do not have fans, got a watercooled system.
thanks
Whats is wrong when you have water cooled system ? Is something not working ?
I just tested this on one of my rigs. Worked OK, but my only gripe is that I can't set target temp higher than 80. I usually run my 290s at 89 to keep the fan speeds down - otherwise they're too loud.
I will make 90C max in next update.Also lower your core clocks if you didnt. In 380 for ethereum 850/1500 is sufficient.
How long does it take to show up on dashboard once you start hashing? Anybody tried a 7 GPU rig with this software (Z97 MB, MSI 470 4GB Armors)?
Meaby you entered bad email address or you added strange characters at the end of file.
Try writing your email once again, if it wont help then i would need team viewer access to windows in the same network or ssh access ( if you will still have problem then write to [email protected] with login details)
November 20, 2016, 04:28:45 PM
Hi, I've been using this OS for 3 days, and I think it's wonderful. Thanks to the developer, but I have a question, will update to optimer v0.4.0.? thank you very much.
Manually update
Code:
wget https://github.com/Optiminer/OptiminerZcash/raw/master/optiminer-zcash-0.4.0.tar.gz
tar -xvzf optiminer-zcash-0.4.0.tar.gz
sudo mv /root/miner_org/optiminer-zcash /root/miner_org/optiminer-zcash_0.3.3
sudo mv optiminer-zcash /root/miner_org/optiminer-zcash
thanks
November 20, 2016, 03:18:30 PM
Hey!
could you implent a option to disable this target temperature option?
because i do not have fans, got a watercooled system.
thanks
could you implent a option to disable this target temperature option?
because i do not have fans, got a watercooled system.
thanks
November 20, 2016, 02:40:01 PM
I just tested this on one of my rigs. Worked OK, but my only gripe is that I can't set target temp higher than 80. I usually run my 290s at 89 to keep the fan speeds down - otherwise they're too loud.
How long does it take to show up on dashboard once you start hashing? Anybody tried a 7 GPU rig with this software (Z97 MB, MSI 470 4GB Armors)?
November 20, 2016, 01:53:52 PM
I just tested this on one of my rigs. Worked OK, but my only gripe is that I can't set target temp higher than 80. I usually run my 290s at 89 to keep the fan speeds down - otherwise they're too loud.
November 20, 2016, 10:56:51 AM
I tried running one of my 7 gpu rx-470 rig with your software. I could log in to the online dashboard with my email address but it doesn't show any mining activity or rig information. Is there anyway to figure out if miner is hashing, monitor attached to rig shows Ubuntu 16.0.4? This rig hashes perfectly with windows 10 and claymore.
November 20, 2016, 06:36:35 AM
Do you plan to add a miner by Claymore 7, the most productive to date, 3x390 - 670sol?
there is no claymore miner for linux newer than 1.1use optiminer v0.4 instead.
November 20, 2016, 06:35:54 AM
Update v1037
- new optiminer 0.4.0 (zec)
- new claymore 7.4 (eth)
To use new version of miner your rig need to have v1037 update and you need to realod your rig so
- reload one rig to test new miner: click save in overclocking near each rig
- reload all rigs: click save in red options
- new optiminer 0.4.0 (zec)
- new claymore 7.4 (eth)
To use new version of miner your rig need to have v1037 update and you need to realod your rig so
- reload one rig to test new miner: click save in overclocking near each rig
- reload all rigs: click save in red options
November 20, 2016, 06:20:33 AM
Do you plan to add a miner by Claymore 7, the most productive to date, 3x390 - 670sol?
November 20, 2016, 05:36:59 AM
Hi, I've been using this OS for 3 days, and I think it's wonderful. Thanks to the developer, but I have a question, will update to optimer v0.4.0.? thank you very much.
Manually update
Code:
wget https://github.com/Optiminer/OptiminerZcash/raw/master/optiminer-zcash-0.4.0.tar.gz
tar -xvzf optiminer-zcash-0.4.0.tar.gz
sudo mv /root/miner_org/optiminer-zcash /root/miner_org/optiminer-zcash_0.3.3
sudo mv optiminer-zcash /root/miner_org/optiminer-zcash
November 19, 2016, 11:43:58 PM
Hi, I've been using this OS for 3 days, and I think it's wonderful. Thanks to the developer, but I have a question, will update to optimer v0.4.0.? thank you very much.
I will do that on monday.
Anyway its more profitable to mine tehreum now.
See here: https://www.whattomine.com
Even with my very high electricity cost, ethereum is now more profitable for me too.... I am hoping though that if I hold some ZEC for a while they may solve the "z" address problem and the price will rise - but I guess with people selling more and more as the ZEC block reward grows it's more likely to keep dropping
November 19, 2016, 06:37:13 PM
My farm of 7950's say otherwise!
November 19, 2016, 05:43:03 PM
Hi, I've been using this OS for 3 days, and I think it's wonderful. Thanks to the developer, but I have a question, will update to optimer v0.4.0.? thank you very much.
I will do that on monday.
Anyway its more profitable to mine tehreum now.
See here: https://www.whattomine.com
November 19, 2016, 04:40:09 PM
Ethermine is no different for me from dwarfpool. Honestly, the hashrate is always below what the miner shows, sometimes very very low. Both on dwarf and ether I get at least 15 percent less from the calculator. It sucks. Let us all know if you find a better pool.
Jump to: