miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX - page 62.

miniZ

member

Activity: 690

Merit: 17

Quote from: cervajz on April 26, 2019, 10:45:57 AM

Hi, great Beam hashrate, but I have lot of rejects (20-30%) on nicehash on poolside.

Gminer, and Bimer are slower, but without rejects

Hi cervajz,
Thanks for reporting this, we will look into this.
Could you tell us which GPUs are you using?
Also could you post here a bit of miniZ log? Or a bit of the console output.
Cheers

joseph32

member

Activity: 418

Merit: 21

Quote from: cervajz on April 26, 2019, 10:45:57 AM

Hi, great Beam hashrate, but I have lot of rejects (20-30%) on nicehash on poolside.

Gminer, and Bimer are slower, but without rejects

Yes, getting the same picture. Usually 10-20% rejected, but also spikes of 30-40%. Definitely room for improvements here.

cervajz

newbie

Activity: 11

Merit: 0

Hi, great Beam hashrate, but I have lot of rejects (20-30%) on nicehash on poolside.

Gminer, and Bimer are slower, but without rejects

miniZ

member

Activity: 690

Merit: 17

Quote from: ltxminer on April 26, 2019, 10:14:50 AM

Quote from: miniZ on April 26, 2019, 09:23:29 AM

Quote from: ltxminer on April 26, 2019, 08:17:34 AM

Did you test 150,5 with 1060 3GB on windows?

I cannot get it to run.

Four 1060 3GB cards, 32GB pagefile

something "mem alloc 1040Mb error"

Hi ltxminer,
3GB is very tight for 150,5 algo. Windows 10 makes ~20% of your gpu memory unavailable so it would not fit.
It should work fine in Linux or Windows 7.
Could you post here the output of ./miniZ -ci ?
Thanks.
Cheers

I am using windows 7, on idle my cards are using 3Mb according to GPU-Z, basically nothing.
That means with the full 3Gb available for the miner
Still "mem alloc error 1040Mb"

Hi ltxminer,
try using --mode=3, it may help but it might become a bit slower.
Could you post here the output of running miniZ.exe -ci?
Thanks.
Cheers

ltxminer

newbie

Activity: 14

Merit: 0

Quote from: miniZ on April 26, 2019, 09:23:29 AM

Quote from: ltxminer on April 26, 2019, 08:17:34 AM

Did you test 150,5 with 1060 3GB on windows?

I cannot get it to run.

Four 1060 3GB cards, 32GB pagefile

something "mem alloc 1040Mb error"

Hi ltxminer,
3GB is very tight for 150,5 algo. Windows 10 makes ~20% of your gpu memory unavailable so it would not fit.
It should work fine in Linux or Windows 7.
Could you post here the output of ./miniZ -ci ?
Thanks.
Cheers

I am using windows 7, on idle my cards are using 3Mb according to GPU-Z, basically nothing.
That means with the full 3Gb available for the miner
Still "mem alloc error 1040Mb"

miniZ

member

Activity: 690

Merit: 17

Quote from: crairezx20 on April 26, 2019, 09:48:42 AM

is it normal that your miner temp goes down while mining with this miner?
I noticed the difference of this mining software from other mining software it keeps my rigs cooler is it normal?
Before my GTX 1080ti reach 65c but right now the temp is playing around 55c?

or maybe there's wrong about my rig that is why it detects low temps in all of my cards?

Hi crairezx20,
The difference looks a bit too big to be normal. Could you post here the log ?
Also, can you let us know which miniZ version are you using? Is it Cuda 8 or Cuda 10? Which pool are you using?
Thanks.
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: clousian on April 26, 2019, 09:38:46 AM

Sorry if this has been asked before, when is a win10 AMD friendly version been released?

Hi clousian,
At the moment we are not considering to add support for AMD.
We suggest that you user another miner like lol miner that has a good AMD support.
Cheers

crairezx20

legendary

Activity: 1638

Merit: 1046

is it normal that your miner temp goes down while mining with this miner?
I noticed the difference of this mining software from other mining software it keeps my rigs cooler is it normal?
Before my GTX 1080ti reach 65c but right now the temp is playing around 55c?

or maybe there's wrong about my rig that is why it detects low temps in all of my cards?

clousian

newbie

Activity: 33

Merit: 0

Sorry if this has been asked before, when is a win10 AMD friendly version been released?

miniZ

member

Activity: 690

Merit: 17

Quote from: ltxminer on April 26, 2019, 08:17:34 AM

Did you test 150,5 with 1060 3GB on windows?

I cannot get it to run.

Four 1060 3GB cards, 32GB pagefile

something "mem alloc 1040Mb error"

Hi ltxminer,
3GB is very tight for 150,5 algo. Windows 10 makes ~20% of your gpu memory unavailable so it would not fit.
It should work fine in Linux or Windows 7.
Could you post here the output of ./miniZ -ci ?
Thanks.
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: sharmanov on April 26, 2019, 08:13:48 AM

Would you ever consider support for AMD Vega/Vega20 cards 🙏 .... this is by far the KING of all Equihash NVIDIA miners, any plans to also be the king of AMD side?

Hi sharmanov,
Thank you for your encouragement.

At the moment we are not considering to add support for AMD.
We suggest that you user another miner like lol miner that has a good AMD support.
Cheers

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: miniZ on April 25, 2019, 10:58:24 PM

Hi joseph32,
nicehash should work just fine.
If you are mining to a ssl port do not forget to specify the ssl:// prefix.
Check our web page https://miniz.ch/faq/ for a few examples.
If you don't manage to make it work, you could post here your command line and we try
to help further.

Cheers,
miniZ

Nice docs too ...

Testing this weekend.

#crysx

ltxminer

newbie

Activity: 14

Merit: 0

Did you test 150,5 with 1060 3GB on windows?

I cannot get it to run.

Four 1060 3GB cards, 32GB pagefile

something "mem alloc 1040Mb error"

Quote from: miniZ on April 25, 2019, 07:47:49 PM

Hi everyone

thank you all for your feedback and support.

There is a new miniZ miner version v1.3n!

* Support for Equihash 150,5 (BEAM).
* Configuration file support.
* Console output on telemetry.
* ...

Equihash 150,5:
* GTX 1050 Ti 4GB ~7-8 Sol/s
* GTX 1060 3GB ~13-15 Sol/s
* GTX 1070 Ti 8GB ~27-30 Sol/s
* GTX 1080 8GB ~28-29 Sol/s
* GTX 1080 Ti 11GB ~38-41 Sol/s
* RTX 2070 8GB ~31-35 Sol/s
* RTX 2080 Ti 11GB ~58-64 Sol/s

For more information check the first page https://bitcointalksearch.org/topic/m.43058434

Use Cuda 10.0 versions with the RTX GPUs. For other GPUs you should test and see which performs best.

Hive OS support

For more information, download, and support check the website: https://miniz.ch/
FAQ and Usage
Download miniZ miner here: https://miniz.ch/download/

Follow us
Twitter

Happy mining!

sharmanov

newbie

Activity: 54

Merit: 0

Would you ever consider support for AMD Vega/Vega20 cards 🙏 .... this is by far the KING of all Equihash NVIDIA miners, any plans to also be the king of AMD side?

joseph32

member

Activity: 418

Merit: 21

Ha, found the error. I tried it with 150.5, not 150,5 Grin

Thx for the help!

miniZ

member

Activity: 690

Merit: 17

Hi joseph32,
nicehash should work just fine.
If you are mining to a ssl port do not forget to specify the ssl:// prefix.
Check our web page https://miniz.ch/faq/ for a few examples.
If you don't manage to make it work, you could post here your command line and we try
to help further.

Cheers,
miniZ

joseph32

member

Activity: 418

Merit: 21

Is Nicehash supported with 150.5? And if yes, how? It just shows the first few lines and then nothing happens anymore.

miniZ

member

Activity: 690

Merit: 17

Hi everyone

thank you all for your feedback and support.

There is a new miniZ miner version v1.3n!

* Support for Equihash 150,5 (BEAM).
* Configuration file support.
* Console output on telemetry.
* ...

Equihash 150,5:
* GTX 1050 Ti 4GB ~7-8 Sol/s
* GTX 1060 3GB ~13-15 Sol/s
* GTX 1070 Ti 8GB ~27-30 Sol/s
* GTX 1080 8GB ~28-29 Sol/s
* GTX 1080 Ti 11GB ~38-41 Sol/s
* RTX 2070 8GB ~31-35 Sol/s
* RTX 2080 Ti 11GB ~58-64 Sol/s

For more information check the first page https://bitcointalksearch.org/topic/m.43058434

Use Cuda 10.0 versions with the RTX GPUs. For other GPUs you should test and see which performs best.

Hive OS support

For more information, download, and support check the website: https://miniz.ch/
FAQ and Usage
Download miniZ miner here: https://miniz.ch/download/

Follow us
Twitter

Happy mining!

AZaman

newbie

Activity: 15

Merit: 0

Quote from: Skarner21 on April 21, 2019, 12:32:26 PM

@azaman are you using Linux OS? it seems that the --oc1 works to me fine the --oc2 reduce my power consumption and there's a little reduce in hashrate compared on using --oc1.

I'm using windows 10 with 4.19.17 driver installed.

Have you tried down grading or upgrading your driver latest or below version?

Hi, yes im using linux - Im using Hiveos. driver is 418.43
oc1 is supposed to be more efficient.
oc2 is maximum performance. (great if electricity is cheap)

Skarner21

hero member

Activity: 700

Merit: 500

Massive price drop coming...

@azaman are you using Linux OS? it seems that the --oc1 works to me fine the --oc2 reduce my power consumption and there's a little reduce in hashrate compared on using --oc1.

I'm using windows 10 with 4.19.17 driver installed.

Have you tried down grading or upgrading your driver latest or below version?

Topic: miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX - page 62. (Read 59767 times)