miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX - page 63.

AZaman

newbie

Activity: 15

Merit: 0

Quote from: miniZ on April 20, 2019, 06:51:32 PM

Quote from: AZaman on April 20, 2019, 02:15:42 PM

not really dropped. infact i had to increase powerlimit as it became unstable,
https://ibb.co/LZ9RwY3
here are my OC settings
https://ibb.co/4NMqHk3

Hi AZaman,
we are sorry, but maybe we did not understand exactly what you consider to be the problem.

With --oc1 we expect that the cards with less power would benefit more.

Did you try running miniZ without --oc1? What was the difference?
Could you paste here right the beginning of the log? (Right after "******** miniZ v1.2m ********")
Cheers

here is the beginning of the log:
miniZ
https://miniz.ch/hiveos/miniZ-1.2m.tar.gz
Already installed
--telemetry :20000 --gpu-line [email protected]:2001 --oc1
************ miniZ v1.2m ************
Number of CUDA devices found: 6
miniZ,144,5[7]: Selecting GPU#3 GeForce GTX 1080 Ti
miniZ,144,5[7]: Selecting GPU#0 GeForce GTX 1080 Ti
miniZ,144,5[7]: Selecting GPU#2 GeForce GTX 1080 Ti
miniZ,144,5[7]: Selecting GPU#1 GeForce GTX 1080 Ti
miniZ,144,5[7]: Selecting GPU#5 GeForce GTX 1080 Ti
miniZ,144,5[7]: Selecting GPU#4 GeForce GTX 1080 Ti
Algo: EQ[144,5]
Pool#0: user[abcd1.xxxx]
server[stratum.zel.cash] port[2001] ssl[no] pers[ZelProof]
Telemetry: [http://localhost:20000]
Temp. limit: [90∞C]

let me try without --oc1 for a few hours.

miniZ

member

Activity: 690

Merit: 17

Quote from: AZaman on April 20, 2019, 02:15:42 PM

not really dropped. infact i had to increase powerlimit as it became unstable,

here are my OC settings

log info :
[ 0d 1h50m26s] 449(447.4)Sol/s 857(853.3)W
0>GTX 1080 Ti ` 100% [45°C/50%] 33.86 I/s 68.3(67.7)Sol/s 135(134.4)W clk=1430MHz mclk=4957MHz Sol/W=0.50
1>GTX 1080 Ti ` 100% [47°C/50%] 33.81 I/s 68.0(67.3)Sol/s 124(122.9)W clk=1341MHz mclk=4957MHz Sol/W=0.55
2>GTX 1080 Ti ` 100% [47°C/50%] 39.62 I/s 79.1(79.1)Sol/s 151(148.8)W clk=1607MHz mclk=5454MHz Sol/W=0.53
3>GTX 1080 Ti ` 100% [44°C/50%] 38.54 I/s 75.9(76.9)Sol/s 147(148.2)W clk=1620MHz mclk=4957MHz Sol/W=0.52
4>GTX 1080 Ti `98.8% [43°C/50%] 39.54 I/s 79.3(78.9)Sol/s 150(149.3)W clk=1683MHz mclk=4957MHz Sol/W=0.53
5>GTX 1080 Ti ` 100% [49°C/50%] 38.90 I/s 77.3(77.5)Sol/s 149(149.4)W clk=1620MHz mclk=4957MHz Sol/W=0.52
[ 0d 1h50m36s] 448(447.4)Sol/s 860(853.4)W
0>GTX 1080 Ti ` 100% [45°C/50%] 33.86 I/s 68.1(67.7)Sol/s 136(134.4)W clk=1379MHz mclk=4957MHz Sol/W=0.50
1>GTX 1080 Ti ` 100% [48°C/50%] 33.82 I/s 67.9(67.3)Sol/s 124(122.9)W clk=1354MHz mclk=4957MHz Sol/W=0.55
2>GTX 1080 Ti ` 100% [47°C/50%] 39.63 I/s 79.6(79.1)Sol/s 150(148.8)W clk=1607MHz mclk=5454MHz Sol/W=0.53
3>GTX 1080 Ti ` 100% [44°C/50%] 38.54 I/s 75.8(76.9)Sol/s 150(148.3)W clk=1645MHz mclk=4957MHz Sol/W=0.52
4>GTX 1080 Ti `98.8% [43°C/50%] 39.54 I/s 79.1(78.9)Sol/s 150(149.3)W clk=1657MHz mclk=4957MHz Sol/W=0.53
5>GTX 1080 Ti ` 100% [49°C/50%] 38.90 I/s 77.5(77.6)Sol/s 150(149.4)W clk=1620MHz mclk=4957MHz Sol/W=0.52

Hi AZaman,
we are sorry, but maybe we did not understand exactly what you consider to be the problem.

With --oc1 we expect that the cards with less power would benefit more.

Did you try running miniZ without --oc1? What was the difference?
Could you paste here right the beginning of the log? (Right after "******** miniZ v1.2m ********")
Cheers

AZaman

newbie

Activity: 15

Merit: 0

Quote from: miniZ on April 20, 2019, 11:54:09 AM

Quote from: AZaman on April 20, 2019, 06:28:50 AM

i have 6 1080ti mining rig , and --oc1 only seems to work on one card. using hiveos

anyone know why? GPU1 in image

https://ibb.co/yWLf1q9

Hi AZaman,
it should work on all cards, however we see your point.

After some time, do the values for GPU0 and GPU1 converge to a higher value?
We notice that they are a bit warmer than the rest of your GPUs, might affect the performance even though it not a great difference.

Let us know if after a few hours the difference is maintained. Also, do you have any display hardware attached?
Additonally, could you paste the log here? The information in the begining should be enough (the GPUs info is the most important).

Thanks.
Cheers

not really dropped. infact i had to increase powerlimit as it became unstable,
https://ibb.co/LZ9RwY3

here are my OC settings
https://ibb.co/4NMqHk3

log info :
[ 0d 1h50m26s] 449(447.4)Sol/s 857(853.3)W
0>GTX 1080 Ti ` 100% [45°C/50%] 33.86 I/s 68.3(67.7)Sol/s 135(134.4)W clk=1430MHz mclk=4957MHz Sol/W=0.50
1>GTX 1080 Ti ` 100% [47°C/50%] 33.81 I/s 68.0(67.3)Sol/s 124(122.9)W clk=1341MHz mclk=4957MHz Sol/W=0.55
2>GTX 1080 Ti ` 100% [47°C/50%] 39.62 I/s 79.1(79.1)Sol/s 151(148.8)W clk=1607MHz mclk=5454MHz Sol/W=0.53
3>GTX 1080 Ti ` 100% [44°C/50%] 38.54 I/s 75.9(76.9)Sol/s 147(148.2)W clk=1620MHz mclk=4957MHz Sol/W=0.52
4>GTX 1080 Ti `98.8% [43°C/50%] 39.54 I/s 79.3(78.9)Sol/s 150(149.3)W clk=1683MHz mclk=4957MHz Sol/W=0.53
5>GTX 1080 Ti ` 100% [49°C/50%] 38.90 I/s 77.3(77.5)Sol/s 149(149.4)W clk=1620MHz mclk=4957MHz Sol/W=0.52
[ 0d 1h50m36s] 448(447.4)Sol/s 860(853.4)W
0>GTX 1080 Ti ` 100% [45°C/50%] 33.86 I/s 68.1(67.7)Sol/s 136(134.4)W clk=1379MHz mclk=4957MHz Sol/W=0.50
1>GTX 1080 Ti ` 100% [48°C/50%] 33.82 I/s 67.9(67.3)Sol/s 124(122.9)W clk=1354MHz mclk=4957MHz Sol/W=0.55
2>GTX 1080 Ti ` 100% [47°C/50%] 39.63 I/s 79.6(79.1)Sol/s 150(148.8)W clk=1607MHz mclk=5454MHz Sol/W=0.53
3>GTX 1080 Ti ` 100% [44°C/50%] 38.54 I/s 75.8(76.9)Sol/s 150(148.3)W clk=1645MHz mclk=4957MHz Sol/W=0.52
4>GTX 1080 Ti `98.8% [43°C/50%] 39.54 I/s 79.1(78.9)Sol/s 150(149.3)W clk=1657MHz mclk=4957MHz Sol/W=0.53
5>GTX 1080 Ti ` 100% [49°C/50%] 38.90 I/s 77.5(77.6)Sol/s 150(149.4)W clk=1620MHz mclk=4957MHz Sol/W=0.52

miniZ

member

Activity: 690

Merit: 17

Quote from: AZaman on April 20, 2019, 06:28:50 AM

i have 6 1080ti mining rig , and --oc1 only seems to work on one card. using hiveos

anyone know why? GPU1 in image

Hi AZaman,
it should work on all cards, however we see your point.

After some time, do the values for GPU0 and GPU1 converge to a higher value?
We notice that they are a bit warmer than the rest of your GPUs, might affect the performance even though it not a great difference.

Let us know if after a few hours the difference is maintained. Also, do you have any display hardware attached?
Additonally, could you paste the log here? The information in the begining should be enough (the GPUs info is the most important).

Thanks.
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: A11an on April 19, 2019, 11:56:21 PM

Why does not the working time of the workers show correctly?
https://d.radikal.ru/d20/1904/d9/6fc56aad972e.jpg

Hi A11an,
thank you for reporting this.
We fixed this already, in the next version it will be working OK. (out soon)
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: george2019 on April 16, 2019, 05:29:29 PM

here's my rig results after first day of mining:

https://i.imgur.com/A3R0g1y.png

https://i.imgur.com/wWQ6Ddz.png

all 5 GPU working on TDP 70% memory +500, as for core oc i used following settings:

GTX 1080Ti zotac amp +100
GTX 1080 msi gamer x +150
3XGTX 1080 EVGA ftw (using second bios with automatic core oc) +0

it's very stable with good temps as well, quite good miner, has higher hashrates than other miners with same settings, used exact same settings as with equihash algo that i was mining last summer before asics arrived, also used --oc2 command in batfile, my rig uses around 20gb pagefile with equihash 144.5 algo, zelcash had some crazy price increase in last month or so, let's see how further can price rise

Hi george2019,
thanks for the encouragement and all this information.

Cheers

AZaman

newbie

Activity: 15

Merit: 0

i have 6 1080ti mining rig , and --oc1 only seems to work on one card. using hiveos

anyone know why? GPU1 in image

https://ibb.co/yWLf1q9

A11an

newbie

Activity: 2

Merit: 0

Why does not the working time of the workers show correctly?
https://d.radikal.ru/d20/1904/d9/6fc56aad972e.jpg

george2019

jr. member

Activity: 83

Merit: 3

here's my rig results after first day of mining:

https://i.imgur.com/A3R0g1y.png

https://i.imgur.com/wWQ6Ddz.png

all 5 GPU working on TDP 70% memory +500, as for core oc i used following settings:

GTX 1080Ti zotac amp +100
GTX 1080 msi gamer x +150
3XGTX 1080 EVGA ftw (using second bios with automatic core oc) +0

it's very stable with good temps as well, quite good miner, has higher hashrates than other miners with same settings, used exact same settings as with equihash algo that i was mining last summer before asics arrived, also used --oc2 command in batfile, my rig uses around 20gb pagefile with equihash 144.5 algo, zelcash had some crazy price increase in last month or so, let's see how further can price rise

miniZ

member

Activity: 690

Merit: 17

Quote from: crairezx20 on April 16, 2019, 06:47:01 AM

How can I enable SSL I tried mining on some pool with ssl:// pool but It doesn't work the CMD shows "SSL: no"
What settings to enable this.
I already follow the settings from the site you provide from the first page but it doesn't work.

Hi crairezx20,
are you using --url? Usage would be something as follows

Code:

./miniZ --url ssl://YourWallet.Worker@PoolServer:PortNumber

If this is not working, could you paste here your command line?
Cheers

crairezx20

legendary

Activity: 1638

Merit: 1046

How can I enable SSL I tried mining on some pool with ssl:// pool but It doesn't work the CMD shows "SSL: no"
What settings to enable this.
I already follow the settings from the site you provide from the first page but it doesn't work.

Xenoflex

newbie

Activity: 2

Merit: 0

Quote from: miniZ on April 13, 2019, 05:54:34 AM

Quote from: Xenoflex on April 12, 2019, 07:32:47 AM

Hi MiniZ,
very good work.
Is there a chance you add a configfile support?
Cheers!

Hi Xenoflex,

Thank you for the encouragement!

As suggested by RoninAlek (Thanks RoninAlek!), you can create a .bat file with your personalised command line to run miniZ.

If you still need a configuration file we will consider your request for the next version.
Cheers

I know the commandline parameters and batchfile usage, but it would be much better to use config files.
So please consider the configuration file request for the next version. Wink

Its much appreciated!
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: Ziv1 on April 14, 2019, 01:15:26 AM

Good day.
Real time (we have the duration of the farm) is needed to understand what happened
with the farm. (pool reports a 30-minute delay in receipt of share)
It is difficult to find the place of failure in the log file if it is not specified when it happened.
Miner can automatically reboot and continue working.
Good luck.

Hi Ziv1,
we will add it to the next version.
Thanks for the feedback.
Cheers

miniZ

member

Activity: 690

Merit: 17

Ziv1

newbie

Activity: 25

Merit: 1

Good day.
Real time (we have the duration of the farm) is needed to understand what happened
with the farm. (pool reports a 30-minute delay in receipt of share)
It is difficult to find the place of failure in the log file if it is not specified when it happened.
Miner can automatically reboot and continue working.
Good luck.

artful

newbie

Activity: 59

Merit: 0

me run miniz in linux ubuntu in mode - one miner - one videocard

count of run copy > 10

why in first gpu me see 10working copy miniZ and one copy in other card

nvidia-smi:

Code:

+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 948 G /usr/lib/xorg/Xorg 5MiB |
| 0 8437 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB |
| 0 8443 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB |
| 0 8445 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB |
| 0 8446 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB |
| 0 8447 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB |
| 0 8448 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB |
| 0 8451 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB |
| 0 8454 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB |
| 0 8456 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 67MiB |
| 1 948 G /usr/lib/xorg/Xorg 5MiB |
| 2 948 G /usr/lib/xorg/Xorg 5MiB |
| 3 948 G /usr/lib/xorg/Xorg 5MiB |
| 4 948 G /usr/lib/xorg/Xorg 5MiB |
| 4 8445 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB |
| 5 948 G /usr/lib/xorg/Xorg 5MiB |
| 6 948 G /usr/lib/xorg/Xorg 5MiB |
| 6 8446 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB |
| 7 948 G /usr/lib/xorg/Xorg 5MiB |
| 7 8448 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB |
| 8 948 G /usr/lib/xorg/Xorg 5MiB |
| 8 8456 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB |
| 9 948 G /usr/lib/xorg/Xorg 5MiB |
| 9 8454 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB |
| 10 948 G /usr/lib/xorg/Xorg 5MiB |
| 11 948 G /usr/lib/xorg/Xorg 5MiB |
| 12 948 G /usr/lib/xorg/Xorg 5MiB |
| 12 8447 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB |
| 13 948 G /usr/lib/xorg/Xorg 5MiB |
| 13 8443 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB |
| 14 948 G /usr/lib/xorg/Xorg 5MiB |
| 14 16945 C ...ing/calcprofit/miners/t-rex/0.9.2/t-rex 119MiB |
| 15 948 G /usr/lib/xorg/Xorg 5MiB |
| 15 8437 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB |
| 16 948 G /usr/lib/xorg/Xorg 5MiB |
| 16 8451 C ...ning/calcprofit/miners/miniz/1.2m/miniZ 2785MiB |
+-----------------------------------------------------------------------------+

miniZ

member

Activity: 690

Merit: 17

Quote from: Xenoflex on April 12, 2019, 07:32:47 AM

Hi MiniZ,
very good work.
Is there a chance you add a configfile support?
Cheers!

Hi Xenoflex,

Thank you for the encouragement!

As suggested by RoninAlek (Thanks RoninAlek!), you can create a .bat file with your personalised command line to run miniZ.

If you still need a configuration file we will consider your request for the next version.
Cheers

miniZ

member

Activity: 690

Merit: 17

Quote from: Ziv1 on April 12, 2019, 01:13:11 AM

Good day.
The log file needs time online.
It is difficult to look for failures in time to stop a farm from the pool.
There were 2 failures that were recorded by the pool (the duration of the failure was more than 20 minutes).
It was not recorded in the log file.
You can see only the temperature drop of the cards and the power consumption.

Good luck.

Hi Ziv1,
Can you explain better what you mean by 'time online'? Just to be sure

We have experienced the same behavior from our 10603 GB, for some OC values. Sometimes, the GPU gets stuck and stops mining for a few minutes.
If we ajust the OCs this behavior does not happen anymore.

With PL=72W we managed to run miniZ (with --oc1) and it runs smoothly, clk~1594MHz, mclk=3666MHz, 16.55 I/s, 33.1 Sol/s.
In MSI Afterburner would be something like core clock = +205, memory clock = -135, but you should test for your conditions.

[ 0d 8h16m39s] S:254/0 0>GTX 1060 3GB ` 100% [53°C/48%] 16.55 I/s 33.3(33.1)Sol/s 72( 70.9)W clk=1594MHz mclk=3666MHz Sol/W=0.47 2.00 Sol/I [btcz.2miners.com] (97.9%) (2.1%)
[ 0d 8h16m49s] S:254/0 0>GTX 1060 3GB ` 100% [53°C/48%] 16.55 I/s 33.4(33.1)Sol/s 73( 70.9)W clk=1607MHz mclk=3666MHz Sol/W=0.47 2.00 Sol/I [btcz.2miners.com] (97.9%) (2.1%)
[ 0d 8h16m59s] S:254/0 0>GTX 1060 3GB ` 100% [53°C/48%] 16.55 I/s 33.2(33.1)Sol/s 75( 70.9)W clk=1607MHz mclk=3666MHz Sol/W=0.47 2.00 Sol/I [btcz.2miners.com] (97.9%) (2.1%)
[ 0d 8h17m09s] S:254/0 0>GTX 1060 3GB ` 100% [53°C/48%] 16.55 I/s 33.4(33.1)Sol/s 70( 70.9)W clk=1582MHz mclk=3666MHz Sol/W=0.47 2.00 Sol/I [btcz.2miners.com] (97.9%) (2.1%)

We suggest you to tune your values, but we'll keep looking into this behavior.
Thanks for the feedback!
Cheers

RoninAlek

newbie

Activity: 26

Merit: 1

Quote from: Xenoflex on April 12, 2019, 07:32:47 AM

Hi MiniZ,
very good work.
Is there a chance you add a configfile support?
Cheers!

You talking about the GUI or the batch file? If you are talking about the batch file config, create a new batch file with:

miniZ -h
pause

If you are talking about the GUI, they have it on their website:
https://miniz.ch/miniz-gui-launcher/

Xenoflex

newbie

Activity: 2

Merit: 0

Hi MiniZ,
very good work.
Is there a chance you add a configfile support?
Cheers!

Topic: miniZ v2.0a Equihash 144,5 125,4 210,9 150,5 192,7 BeamHash3 ProgPoW Ethash CFX - page 63. (Read 59767 times)