Hi!
miniZ is a fast and friendly Equihash <144,5>, <144,5s> - BeamHash III, <125,4> <192,7> <210,9> <150,5> <96,5>, ProgPoW, Ethash/Etchash, and Octopus miner.
https://miniz.ch * Supports mining Equihash <144,5> (BTG, BTCZ, XSG, LTZ, BZE), <144,5s> (BeamHash III - BEAM), <192,7> (ZER, SAFE, GENX, VDL, ZERC, ANON), <125,4> (ZEL), <210,9> (AION), <150,5> (GRIMM, XGM,CASH), <96,5> (MNX).
* Supports mining Ethash/Etchash (ETH, ETC, CLO, QKC, MOAC, ZIL, UBQ...)
* Supports Octopus (Conflux, CFX)
* Supports mining ProgPoW (RVN, ZELS, SERO, ZANO, VEIL, VBK)
* miniZ is compiled for Linux and Windows.
* Requires minimum 2GB GPUs. Ex. GTX 1050 2GB.
* Cool console output and telemetry monitoring.
* Supports most mining pools.
* Developer fee is set to: Equihash: 2%; ProgPoW: 1%; Ethash: 0.75%; Octopus: 2%.
miniZ v2.0a * Fixed most progpow/ethash issues.
* Improved invalid shares on CFX.
* Improved stability.
* Improoved autofan.
* Added --autoclocks option to apply auto OC settings.
* * Added --stocksettings option to set stock settings.
* * Added --priority option to set priority to miniZ process.
* *Sudo (Linux)/administrator privileges (Windows) required.
Remember to try --oc1/--oc2/--ocX options for optimum performance.
Fom
miniZ v1.5u --ocX option can be used in all algorithms, for automatic tunning of the best kernel for your GPU.
For updated and more detailed information read the specific topic on
FAQ page.
Download
HereSupport:
FAQ and
Usage Additional information
https://miniz.chEthash: * GTX 1050 2GB ~0.07 MH/s
* GTX 1050 Ti 4GB ~ 12.4 MH/s
* GTX 1660 Ti 8GB ~ 25.4 MH/s
* GTX 1070 Ti 8GB ~ 26.8 MH/s
* GTX 1080 8GB ~ 31.0 MH/s
* GTX 1080 Ti 11GB ~ 45.1 MH/s
* RTX 2070 8GB ~ 36.9 MH/s
* RTX 3090 24GB ~ 106.3 MH/s
ProgPoW - KawPoW: * GTX 1050 2GB ~0.16 MH/s (Zano~5.95MH/s )
* GTX 1050 Ti 4GB ~ 6.05 MH/s
* GTX 1060 3GB ~ 9.79 MH/s
* GTX 1660 Ti 8GB ~ 15.08 MH/s
* GTX 1070 Ti 8GB ~ 13.35 MH/s
* GTX 1080 8GB ~ 15.25 MH/s
* GTX 1080 Ti 11GB ~ 24.10 MH/s
* RTX 2070 8GB ~ 20.82 MH/s
* RTX 3090 24GB ~ 54.29 MH/s
Equihash - BeamHash III: * GTX 1050 2GB ~3.6 Sol/s
* GTX 1050 Ti 4GB ~ 6.8 Sol/s
* GTX 1060 3GB ~ 8.7 Sol/s
* GTX 1660 Ti 8GB ~ 16.4 Sol/s
* GTX 1070 8GB ~ 17.8 Sol/s
* GTX 1070 Ti 8GB ~ 20.1 Sol/s
* GTX 1080 8GB ~ 19.7 Sol/s
* GTX 1080 Ti 11GB ~ 29.2 Sol/s
* RTX 2070 8GB ~ 24.5 Sol/s
Equihash 150,5,3 (BeamHash II): * GTX 1050 Ti 4GB ~13 - 14 Sol/s
* GTX 1060 3GB ~21 - 24 Sol/s
* GTX 1660 Ti 6GB ~30 - 33 Sol/s
* GTX 1070 Ti 8GB ~41 - 47 Sol/s
* GTX 1080 8GB ~42 - 46 Sol/s
* GTX 1080 Ti 11GB ~59 - 61 Sol/s
* RTX 2070 8GB ~52 - 58 Sol/s
* RTX 2080 Ti 8GB ~90 - 96 Sol/s
Equihash 125,4 (ZelHash): * GTX 1050 Ti 4GB ~12 - 14 Sol/s
* GTX 1060 3GB ~21 - 24 Sol/s
* GTX 1660 Ti 6GB ~31 - 34 Sol/s
* GTX 1070 Ti 8GB ~40 - 46 Sol/s
* GTX 1080 8GB ~42 - 46 Sol/s
* GTX 1080 Ti 11GB ~59 - 63 Sol/s
* RTX 2070 8GB ~51 - 57 Sol/s
* RTX 2080 Ti 8GB ~90 - 97 Sol/s
Equihash 210,9: * GTX 1050 2GB ~83 - 89 Sol/s
* GTX 1050 Ti 4GB ~89 - 98 Sol/s
* GTX 1060 3GB ~142 - 159 Sol/s
* GTX 1660 Ti 6GB ~191 - 204 Sol/s
* GTX 1070 8GB ~221 - 248 Sol/s
* GTX 1070 Ti 8GB ~228 - 265 Sol/s
* GTX 1080 8GB ~252 - 282 Sol/s
* GTX 1080 Ti 11GB ~376 - 380 Sol/s
* RTX 2070 8GB ~293 - 328 Sol/s
* RTX 2080 Ti 8GB ~494 - 530 Sol/s
* RTX 3090 24GB ~568 - 591 Sol/s
Equihash 150,5: * GTX 1050 Ti 4GB ~8 - 9 Sol/s
* GTX 1060 3GB ~14 - 16 Sol/s
* GTX 1660 Ti 6GB ~20 - 23 Sol/s
* GTX 1070 8GB ~26 - 28 Sol/s
* GTX 1070 Ti 8GB ~28 - 32 Sol/s
* GTX 1080 8GB ~29 - 32 Sol/s
* GTX 1080 Ti 11GB ~40 - 43 Sol/s
* RTX 2070 8GB ~35 - 39 Sol/s
* RTX 2080 Ti 11GB ~60 - 66 Sol/s
Equihash 144,5 (ZHash): * GTX 1050 2GB ~19 - 21 Sol/s
* GTX 1050 Ti 4GB ~21 - 23 Sol/s
* GTX 1060 3GB ~36 - 41 Sol/s
* GTX 1660 Ti 6GB ~ 47 - 50 Sol/s
* GTX 1070 Ti 8GB ~64 - 73 Sol/s
* GTX 1080 8GB ~69 - 75 Sol/s
* GTX 1080 Ti 11GB ~96 - 98 Sol/s
* RTX 2070 8GB ~76 - 85 Sol/s
* RTX 2080 Ti 11GB ~128 - 139 Sol/s
Equihash 192,7 (Equihash Heavy): * GTX 1050 2GB ~10 Sol/s
* GTX 1050 Ti 4GB ~12 Sol/s
* GTX 1060 3GB ~20 Sol/s
* GTX 1660 Ti 6GB ~27 Sol/s
* GTX 1070 8GB ~35 Sol/s
* GTX 1070 Ti 8GB ~37 Sol/s
* GTX 1080 8GB ~38 Sol/s
* GTX 1080 Ti 11GB ~55 Sol/s
* RTX 2070 8GB ~46 Sol/s
* RTX 2080 Ti 11GB ~80 Sol/s
Equihash 96,5: * GTX 1050 2GB ~7.1 KSol/s
* GTX 1050 Ti 4GB ~7.8 - 8.5 KSol/s
* GTX 1060 3GB ~12.4 - 13.6 KSol/s
* GTX 1660 Ti 6GB ~15.2 - 16.0 Sol/s
* GTX 1070 Ti 8GB ~21.4 - 23.5 KSol/s
* GTX 1080 8GB ~22.7 - 24.5 KSol/s
* GTX 1080 Ti 11GB ~28.3 - 30.6 KSol/s
* RTX 2070 8GB ~21.2 - 23.9 KSol/s
* RTX 2080 Ti 11GB ~38.3 - 40.6 KSol/s
Hive OS support @
https://miniz.ch/2019/08/14/how-to-use-miniz-with-hiveos/Follow us Twitter
https://twitter.com/miniZ_miner * * * Happy mining! * * * Older versions:
miniZ v1.9z5b* Review of all kernels for all algorithms!
* AMD improvements 125,4 up to 10%, depending on GPUs and OCs.
* AMD improvements 144,5 up to 10%, depending on GPUs and OCs.
* Added --fanspeed-all/--fantemp-all options to set fan control for all GPUs.
** Added --fanmax option, works only with --fantemp. If not used fan max is 99.
** Added --power option to AMDs, on Linux.
* Better AMD fan control on Windows.
** On Windows, added support for fan control for all nvidia drivers.
** Added --gpuoffset/--memoffset options for NVIDIA GPUs, on Linux. (Will only work if there's a Xorg running with a configured GPU.)
* Added fan core/memory clocks, and speed information (%) to Telemetry.
* Added support for RX 5500 and AMD R9 390. (Feedback is welcome.)
* Fixed fee getting stuck in particular conditions related to network issues (unstable, unreliable...).
* Fixed --ocX on ethash.
* Fixed UBQ stale share on start.
* Fixed Worker name that was not consistent, on ZergPool.
* Fixed 144,5 broken kernels.
* Removed LHR kernels.
* Requires sudo (Linux)/administrator privileges (Windows)
Note that fan control options do not always reset on exit: might keep the speed it had when the miner exited, or set then fan to 0, depending on the driver.We keep looking at this. Let us know how it works for you.
When using --fanspeed conjointly with --fantemp, the fan % defined with --fanspeed works as minimum fan speed.
miniZ v1.9z4* Performance improvements for 125,4 on all gpus. Up to 20%.
* Performance improvements for 150,5 on all gpus.
* Added ubqhash algorithm for Ubiq (UBQ) mining.
* Added AMD support for all progpow algos.
* Added fan/target temperature control option --fantemp.1* Changed AMD GPU order to PCI order.
* Added AMD fan control.
* Added support for NVIDIA RTX 40XX GPUs.* Fixed issue with Telemetry.
* Fixed Ampere modes that were not launching well on Aion mining.
* Fixed 96,5 support.
* Added reset value to power option. --power=1 will reset to stock value. (0 to ignore)
* Power option show range when trying to set different value.
1 Requires sudo (Linux)/administrator privileges (Windows)
Works with:
Linux: AMDs; and NVIDAs w/ driver >515
Windows: Polaris AMDs; and NVIDIAs w/ driver >515
On exit --fantemp resets to auto on AMDs, and to 50% fan on NVIDIAs.
When using --fanspeed conjointly with --fantemp, the fan % defined with --fanspeed works as minimum fan speed.miniZ v1.9z3*
Added --gpuoffset and --memoffset for core/memory clocks offset. (Windows only)* Fixed Ethash, on AMD's, on Windows.
* Fixed AMD temperatures, on Windows.
* Fixed AMD fan display, on Linux.* Added --hideclocks option to hide clocks from output.
* Added socks information to console/file mining log.
* Improved invalid/stale shares on progpow/ethash/octopus.
* Fixed issues with KawPow mining.(Ravencoin, Sato, KawKaw, Neoxa, Arielcoin...)* Improved stability.
miniZ v1.9z2*
Performance improvements for some AMD gpus, on Flux. Major improvement for the RX 6800 XT.* Fixed issues that were causing the miner to fail start, on Windows.
* Fixed issue interfering with Zano mining.
* Removed ‘automatic’ clock reset, on exit. Except when they are changed on the command line.
miniZ v1.9z*
Added support for Conflux – Octopus algorithm (NVIDIA).*
Added --fanspeed option for fan control (NVIDIA).* Improved support for AMD gpus.
* Added socks options to configuration file.
* Added clock reset when miniZ exits. (Nvidia RTX only)
* Minor bug fixes.
miniZ v1.8z3*
Added support for AMD GPUs RX 6600/6800/6900 (XT).*
Added support for AMD RX 590.* Reduced stale shares on Aion.
* Improved stability.
* Minor bug fixes.
miniZ v1.8z2*
Added AMD support for 144,5, for Ellesmere GPUs and gfx1031 (RX 6700 XT) GPUs.*
Added AMD support for ETH, for Ellesmere GPUs and gfx1031 (RX 6700 XT) GPUs.* Fixed support for AMD GPUs, on Windows.
* Fixed issues with AMD support for 125,4 (Flux), for Ellesmere GPUs and gfx1031 (RX 6700 XT) GPUs.
miniZ v1.8z*
Improved performance and stability for ETH for LHR GPUs.
*
Improved performance for RTX 30XX, for 125,4 algorithm (Flux).
*
Added AMD support for 125,4 (Flux), for RX 470/480/570/580 GPUs.
*
Added FIRO support. Check How to mine Firo (Firo)? On our
FAQ page.
* GPU brand shows on log.
* Fixed issues with SERO.
* Fixed issues with 192,7.
* Added option to dump pool stratum communication, --protocol-dump.
*
Added options to fix core and mem clocks. (require sudo) --gpuclock=[gpuclock(MHz)] to apply list of GPU clocks, works for sm>=7. Use gpuclock=1 for auto.
--memclock=[memclock(MHz)] to apply list of memory clocks, works for sm>=7. Use memclock=1 for auto.
* Added option to change power limit within the miniZ.
--power=[power(W)] to apply list of power limits (requires sudo).
or -pl [power(W)]
* Added option for SOCKS proxy specification, --socks=[proxy].
Format [username:password@]server:port.
The prefix username:password@ is optional.
* Added option to let SOCKS proxy resolve DNS requests, --socksdns.
* Added options --amd/--nvidia to select amd/nvidia GPUs, respectively.
* Added the short average avg0 to getstat.
* Minor bug fixes.
miniZ v1.8y3 * Added kernel for Ethash mining locked GPUs (RTX 3060 default mode 80).
Use 461.40 (Windows) or 460.39 (Linux) drivers for best performance, although any driver should work.
Let us know if there is interest on mining lock workarounds for other GPUs and algos (equihash should not be affected by this lock).
* Added dag verification on ETH.
* Improvements 150/5 for RTX 30XX GPUs, up to 8%.
* Added
--mt-auto,
--mt-dump and
--mt options to adjust memory timings on Linux. (Check
FAQ or
Usage pages.)
* Added HTTP headers to json api.
* Fixed low hashrate on Windows 7 while mining ETH, on some GPUs.
* Added mining rentals, and other pools, to magic list.
* Minor bug fixes.
miniZ v1.8y2 * Fixed GTX 1660 regression while mining flux.
*
Added support for Ethash and Etchash mining. Ethereum mining, most Ethash coins, and Ethereum Classic.
*
Improvements for Flux, on RTX 30XX.
*
Fixed invalid shares on Flux, and ETH.
*
Added Maxwell kernel for Beam.
*
Fixed kernel for 1650 Ti, RTX 3060, and Quadro T1000 on Beam.
*
Added algo and pers details to Telemetry.
* Options --server and --port can be used separately. (Fixing issue with NiceHash "there is no pool selected".)
* Added --forcenvml, to force GPU monitoring.
* Intensity option was modified.
* When no worker name is specified, miniZ doesn't make worker=rig's name anymore.
* No need to add stratum1 to url, for ETH, on Proshashing.
* Improved stale shares.
* No need to add stratum/stratum1/stratum2 to url, for ETH, on most pools. (Let us know if this is not the case for your pool.)
miniZ v1.7x3 *
Fixed major issues handling connections on Windows. *
Added kernel for ETH mining with the RTX 30XX GPUs. * Improved stale shares for all algos.
miniZ v1.7x2 *
Added support for:
- Ravencoin (RVN), Zelantus (ZELS)
- Super Zero (SERO)
- Zano (ZANO)
- Veil (VEIL)
- Veriblock (VBK) Fee is 1% of mining time.
*
Added support for ethash - ETH/ETC (beta)! Fee 0.75% of mining time.
*
Fixed 192,7 mining. *
Minor improvements for 210,9 and 96,5. * Removed support for 150,5,3.
* Fixed colours on Windows 7 terminal.
* Improved overall stability.
* --smart-pers enabled by default (use —smart-pers=0 do disable). miniZ will adjust the pers string as needed.
* Fixed hashrate reporting for 96,5.
*
Added --coolui option for alternative interface. * Added --quit-disconnect to force the miner to quit when the connection drops (or when quit file is detected).
Note: If you’re using versions before v1.6x, and using Turing architectures (16xx series and RTX), then you need to use Cuda 10.0 versions (or cuda11 for the Ampere architectures - RTX 30 series).miniZ v1.6x * 210,9 major improvements: up to 8% depending on GPU. * 144,5 improved hashrate for the RTX 30XX GPUs.
* Added support for SM_30 (Kepler) devices.
* Fixed issues with
--pers on MiningRigRentals
* Combined CUDA 8/10/11 versions into one (same) executable.miniZ v1.6w2 *
192,7 major improvements: ~2-11% depending on GPU. Turing GPUs, and 1050 Ti, have the largest improvements. * Reduced invalid shares on 192,7.
* Added 2GB kernel for 192,7 (Linux/Windows7).
* Added 3GB kernel for 192,7 (Windows 10).
* Added 2GB kernel for 144,5s (beamhash3) (Windows7).
*
Added experimental support for Ampere GPUs. (Use Cuda 11.1 version.)miniZ v1.6w * 150,5 major improvements: 2-20%, depending on GPU. Turing GPUs have the largest improvements.
* Added ocX table to telemetry. Current mode shows in blue, the best mode in red.
* ocX best mode can be saved to configuration file. (See FAQ)
* In console, ocX log is more clearly shown.
* Added comand line options: ocXreset – reset stats when finishes ocX; ocXsamples increase/decrease samples in ocX search (default 300).
* You can already write for ex. --mode1=5 to select a mode to specific GPU (before you could not use ‘=’).
miniZ v1.6v * Improved stability in all algorithms.
* Added --stale=n option to help deal with high number of stale shares (default n=100).
Increasing n will allow higher number of stale shares but may be beneficial to performance. Decrease n if you have too many stale shares.
* Fixed invalid shares while mining beam.
* Fixed stale shares that were misidentified as invalid on daPool.
* Smarter check when ssl/tls mining if user does not declare it explicitly on the command line.
* Other minor bug fixes.
miniZ v1.6v5 * Major structural software improvements. miniZ is now mini! (<16MB)
* Major speed improvements for 144,5s – BeamHashIII ($BEAM).
* Minor improvements for all other algos, for some GPUs.
* Fixed invalid shares on AION/F2Pool.
* Faster feedback on miniZ start.
* Improved command line usage.
* Added read/set kernel settings to miniZ API.
* Fixed some more stability issues that caused unusual random crashes.
miniZ v1.6v3 * Removed autoswitch for Beam.
* No need to add –par when mining to pool.raskul.com or beamv3.nicehash.com.
* Fixed –pers auto that was not working on NiceHash.
* Added support for GTX 1650 4GB, in BeamHash III.
* Added a few corrections to 144,5 that we expect to benefit miners experiencing high CPU usage.
(Let us know if this helped)
* Added support for BeamHash III. (Hashrate below)
* Fixed --show-mode option that was only showing in combination with other options.
* Included another low memory mode for 1060 3GB on ZEL. (running with --oc2)
* Completely reworked the --ocX mechanism.
* Changed kernel calls for 150,5. Let us know if it improves your driver CPU usage.
* Better default kernels for GTX1070, on stock settings, for all algorithms.
miniZ v1.5u2 *
Fixed bug that on ZEL mining was not submitting shares on some pools. * Adjusted default kernels for GTX1070, on stock settings, for all algorithms.
*
144,5 (BTG, XSG, BTCZ, BTH, BZE,...): major improvements for various GPUs. Up to 6.5% depending on GPU. *
125,4 (ZEL): minor improvements. Up to 1% depending on GPU. *
Fixed connection latency issues. * Added --ocX option for automatic tunning of the best kernel for your GPU and OC settings, for all algos.
* Added --show-mode option to show the miniZ kernel each GPU is using.
* Reduced memory utilization on 144,5 for all GPUs.
* Reduced memory usage on 3GB GPUs for 125,4, on Windows 10 (work still in progress).
miniZ v1.5t3*
125,4 (ZEL): major improvements for various GPUs. Up to ~11%* (1660 Ti) and ~8%* (RTX 2070).*
150,5,3 (BEAM): major improvements up to ~3-4%* for GTX 1660 Ti, RTX 2070. Minor for other GPUs.*
Better pool connection handling.* Added
--ocX option for automatic tunning of the best kernel for your GPU and OC settings. (125,4 and 150,5,3 only)
* Added macros to log file name:
@algo@,
@date@,
@version@,
@user@, and
@host@.
Write for ex.
--logfile @algo@@date@@[email protected] in the command line.
* Improved stability.
miniZ v1.5t2*
Improvements for 150,5,3 algo (BEAM). Major for GTX 1660 Ti, 1080 Ti, and RTX GPUs (~2-4%).
* If mining to wallet you can write --par=beam2.
miniZ v1.5t* Major improvements: 150,5 and 210,9. Up to 4% depending on algo and GPU.
Also for RTX 2070 (up to 8% on 192,7), 1660 Ti.
* Minor improvements in all other algos. Up to 2% depending on algo and GPU.
*
Better support for GTX 1660 Ti and GTX 1070.* Improved stability.
* Fixed telemetry on Chrome browser.
*
Fixed CPU load when mining Beam on Windows.* Cleaner program exit/termination.
* Added
--color and
--fee-time to command line options. (see
Usage page)
* Other minor fixes.
miniZ v1.5s * Speed improvement for ZelHash, BeamHash and ZHash. Up to 3% depending on algo and GPU.
* Kepler support removed in this version, except for MinexCoin and Aion.
* Flush console output on every line.
miniZ v1.5r* Major performance improvement for 210,9, for all GPUs. Up to 7%, depending on GPU.
* Improved stability. (This was mostly affecting Beam mining)
* miniZ updates the hashrate when not mining. It drops to zero when mining stops.
* Better handling of “worker not autorized” error.
* Minor bug fixes.
miniZ v1.5q6 * Performance improvement for 192,7. (Up to 4% on RTX)
* Added --jobtimeout, --retries, --retrydelay for (re)connection customization.
* Added --cleanjobs for miner to only accept clean jobs.
* Better connection handling.
* Bug fixes.
* Fixed invalid shares on 150,5,3.
* General performance improvement for 150,5,3 (all GPUs).
* Added --pci-order option to show GPU PCI order in miniZ output (console, logfile).
* Fixed support ZEL mining on 3GB GPU, on Windows 10.
* (Hopefully!) Fixed slow start for some GPUs/rigs.
* Fixed failover pools.
* Fixed --pers=auto for 150,5,3.
* Improved performance for 192,7 (GTX 1660 GPUs).
* Other minor bug fixes.
* Adjusted oc modes for ZelHash -
125,4. Major improvements for 1080Ti (>7%).
* Adjusted oc modes for BeamHashII -
150,5,3 with improvements.
* Improvements for ZHash -
144,5, for RTX cards.
* Further attempts to support ZEL mining on 3GB GPU, on Windows 10.
* Fixed support for 144,5 for 1050 2GB, on Windows 10.
* Fixed slow start for some GPUs/rigs.
* Added
--csv option for log stats in csv format.
* Added busID to -ci output.
* Fixed issue connection to sparkpool.
* Fixed invalid shares on flypool.
* Other minor bug fixes.
miniZ v1.5p * Added support for 150,5,3 (BeamHashII).
* Fixed ZEL mining on 3GB GPU, on Windows 10. (Testing)
* Improved support for 210,9 (Aion).
* Added
--stat-int option to customize statistics interval.
* Added
--nonvml option to disable GPU health stats.
* Improved cpu load.
* Minor bug fixes.
miniZ v1.4o * Added support for 125,4 (ZelCash).
* Added support for 210,9 (Aion). (Testing!)
* Fixed solution/iteration for 96,5 (Testing!)
* Minor bug fixes.
miniZ v1.3n5 * Improved stale shares.
* Fixed GTX 1060 settings without oc1/2. (144,5)
* Better mode detection 3GB cards. (150,5)
* Fixed templimit in configuration file.
* Fixed ssl connection fault.
* Improved CPU load.
* Display NA for temperature when not available.
* Improved 1080 hashrate with --oc
* Fixed "offline" worker issue.
* Fixed problems with sparkpool
* Modified --localtime, added the possibility to show both local time and running time. (Ex. --localtime 11)
* Improved high CPU load.
* Better invalid share detection.
* Ignore pers auto for 150,5.
* Fixing issues with worker going offline.
*
Support for Equihash 150,5 (BEAM).
*
Configuration file support.
*
Console output on telemetry.
* Fixed busid in api.
* Fixed time in api.
* Removed ` when nocolor.
* Removed extra miniZ instance from GPU0.
* Improved command line parsing.
* --localtime to show local time instead of running time.
* --all-shares to show all shares on statistics (user and fee).
* --read-config to read configuration file.
* --write-config to create configuration file.
* --oc1, --oc2 and --intensity can now be set per GPU.
* Improved stability.
* Improved (re)connection reliability.
miniZ v1.2m * Speed improvements for 144,5 and 192,7.
Major boost for RTX GPUs. * Fee shares excluded from statistics.
* --show-pers to show personalization string.
* --smart-pers to use personalization string ‘auto’ if available, otherwise use specified pers. For compatibility with Mining Rig Rentals.
* --show-solratio to show number of solutions per iteration.
*
--oc1/--oc2 for boost in performance when applying OCs to GPUs. * Help with new look. Run miniZ.exe --nocolor --help to exclude colors (Win7).
* Improved stability.
* Other bug fixes.
miniZ v1.2l * Support for
Equihash 192,7 (ZER, SAFE, GENX, VDL, ZERC).
* miniZ
GUI Launcher v1.0. (Windows)
* Minor speed improvements for 144,5.
* Fixed --intensity option. Express in percentage [0,100].
* Other bug fixes.
miniZ v1.1k * Support for Equihash
96,5 (MinexCoin).
* Speed improvement up to ~6%, depending on GPU and OC settings.
* Modified miner behavior when all user pools are down: miner stops mining and tries to reconnect every minute.
* Cleaner console exit status for better OS management.
* Bug fixes.
miniZ v1.0j * Speed improvement up to ~4%, depending on GPU.
* Current/average power added to console and log/output file.
* Current/average total power added to console and log/output file.
* Added accepted share efficiency per GPU, expressed as a percentage (Accepted Shares/Total Shares * 100)
* Added --shares-detail option to show accepted/rejected shares per GPU, instead of accepted share efficiency.
* Added --log-delay option to define the time to wait (in seconds) before starting periodic writes to the log/output file.
* Added --log-period option to define the time interval (in seconds) between periodic writes to the log/output file.
* Added --f11 option for small tuning. (see
Usage page)
* Windows Cuda 10.0 version (excluded Cuda 9.2).
* Bug fixes.
miniZ v1.0i++ *
GTX 1080 Ti performance is back!
* Fixed logfile output.
* Further attempts to correct uncommon but persistent crashes.
* Modifications to improve stability.
* Speed improvement in Windows version.
* Merged output and errors into the same logfile.
* --gpu-line is default if more than 3 GPU.
* Minor speed improvements. (Mostly on GTX 1060 ~3%)
* Improved efficiencies. (~2-3%)
* Improved stability.
* --latency (ping) is now calculated with shorter average period.
* --nocolor option for no color in console. Now logfile is always no color.
* Bug fixes.
miniZ v1.0h * Speed improvement. Up to 5%, depending on GPU.
* --nocolor option for cleaner logfile.
* --pers auto, for automatic personalization string, compatible with some pools.
* Improved stability at low power conditions.
* The GPU order is now pci bus order by default.
* Added cuda_error.log file output for cuda errors.
* --latency to show pool ping latency.
* Added api compatibility with Awesome miner.
* Minor bug fixes.
* Hive OS support @
https://miniz.ch/2018/12/13/hive-os-support/miniZ v1.0g *
Major speed improvement. Up to 10%, depending on GPU.
* Fixed support for rigs with >10 GPUs.
* Minor bug fixes.
miniZ v1.0f *
Major speed improvement. Up to 16%, depending on GPU.
* Minor bug fixes.
* Added extra version compiled with cuda 10.0.
* Added support for
RTX 20xx GPUs (alpha stage).
* Added --version option to print some miniZ version information. (Check
Usage page)
miniZ v1.0e * Supports 2GB GPUs on Windows OS.
* Added ––log option to generate log file. (Check
Usage page)
* Speed improvement. Up to 5%, depending on GPU.
miniZ v1.0d *
Major speed improvement. Up to 12%, depending on GPU.
* The temperature limit in the gauge meter was changed (telemetry).
* More accurate power consumption and Sol/W output.
miniZ v1.0c * Major speed improvement. Up to 20%, depending on GPU.
* Better support for 1070 Ti 8GB.
* More stable mining for 2GB GPUs.
* Requires minimum 1.9GB. Ex. in Linux you can run
miniZ and Xorg with the same GPU.
miniZ v1.0b * There is a
Windows version available!
* minor speed improvement.
* Corrected minor bugs (--cuda-devices is working now, ...)
* Added support for Kepler GPUs
miniZ v1.0a * miniZ v1.0a is released for
Linux only.
