Pages:
Author

Topic: mmpool.org - 1.5% fee DGM/PPS - tx fees/vardiff/merge mine/tor - page 76. (Read 361844 times)

legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
going to run 15th at the pool for a bit.  should take an hour to show

hurray!!!!

 Grin

i managed to get 12TH/s from my rigs... the rest just show too many rejects to make it worthwhile.

It has begun I went from 1.3 to 2.5 to 2.8  th

should keep rising to 15th

  I did  a  rent a rig site for a day

now at 4.6 th and climbing
sr. member
Activity: 434
Merit: 250
going to run 15th at the pool for a bit.  should take an hour to show

hurray!!!!

 Grin

i managed to get 12TH/s from my rigs... the rest just show too many rejects to make it worthwhile.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
going to run 15th at the pool for a bit.  should take an hour to show
sr. member
Activity: 268
Merit: 250
appears to be good again Roll Eyes
sr. member
Activity: 434
Merit: 250
looks like we've been hit again  Cry my miners have gone to failover.
sr. member
Activity: 434
Merit: 250
sr. member
Activity: 434
Merit: 250
f**k!

it fell over again. at least I found which were the offending miners.
i'll try again tomorrow.

You do know that the Millenium Falcon is a piece of junk, good luck Han!  Tongue

this is one step beyond that, this is a HEAP of junk.
legendary
Activity: 1526
Merit: 1001
f**k!

it fell over again. at least I found which were the offending miners.
i'll try again tomorrow.

You do know that the Millenium Falcon is a piece of junk, good luck Han!  Tongue
sr. member
Activity: 434
Merit: 250
f**k!

it fell over again. at least I found which were the offending miners.
i'll try again tomorrow.
sr. member
Activity: 434
Merit: 250
i'm damned impatient.
what it looks as though; i'm ramping in my rigs too quickly together.

they don't seem to fall over when i wait for each part to plug in before plugging in the next.

so... if i'm up all night, i will get this heap of junk mining on mmpool to it's full potential!

ps: yes, i'm the new pilot of the millennium falcon.
member
Activity: 119
Merit: 10
They were S1:s (yes still running). One had charred connector due to me using 2 pci-e connectors on one cable Smiley My setup was 2 good brand power suplies with 3 antminers, each supply was 650 watts each. So it was running on the edge all the time. My knc saturn with 2 asics still goes 500gh if wanted but i wanted to "underclock" it a bit too. Would have to clean it all the time otherwise. Now it goes 450gh or smthing.

A good campaign for the mmpool and when hit 1000 th and the rest would be history.

legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
I have about 90% of my mining power pointed at mmpool, that like 0,5 th only. I used to have 1 th but one antminer melted its power connector due to overclocking/bad cables, and other just went berzerk. 1 still working.

Where to buy cheap hashes? mmpool organize get together with paid airplane tickets etc. from mmpool? Grin *wink wink*

So, it isn't safe to overclock your S3s? (I'm assuming all your antminers are S3s?) Did you use a cheap PSU, were 2 or 4 cables connected when it happened? Sorry to be a bit offtopic, but this is quite interesting information for other S3 users.

I read over on Slush's pool there are specific setting S3 miners should use or else they would have issues on the pool. So, perhaps MMpool has a similiar problem with S3's difficulty or so.

I set my s'3's with d=256 in the password space.   they work fine with that number.  I have 7 pointed here.  

3 clocked to 243.75
2 clocked to 237.5
1 clocked to 218.75
1 clocked at 212.50

the better clockers are s3+
legendary
Activity: 1526
Merit: 1001
I have about 90% of my mining power pointed at mmpool, that like 0,5 th only. I used to have 1 th but one antminer melted its power connector due to overclocking/bad cables, and other just went berzerk. 1 still working.

Where to buy cheap hashes? mmpool organize get together with paid airplane tickets etc. from mmpool? Grin *wink wink*

So, it isn't safe to overclock your S3s? (I'm assuming all your antminers are S3s?) Did you use a cheap PSU, were 2 or 4 cables connected when it happened? Sorry to be a bit offtopic, but this is quite interesting information for other S3 users.

I read over on Slush's pool there are specific setting S3 miners should use or else they would have issues on the pool. So, perhaps MMpool has a similiar problem with S3's difficulty or so.
sr. member
Activity: 434
Merit: 250
OK, here goes. i'm done worrying about rejects, i'm going to point all the hashpower I currently have and let it ramp in, so we'll see what it can achieve.

*stumbles blindly into switching pools and hopes for the best*

looks like you are up to 9.6 th with the af28xxx account.

 I am at 10.4 th with the 7c90xxxx account

do you have another account?

no, just the one account that I use. i'm having to set an overall difficulty on all of my miners to get less rejects, it seems to be ramping in OK

should go beyond 20TH/s eventually, if I can get it right.

ADD: some of my S3's are just rubbish on this pool, it's quite annoying.
ADD2: it's falling over  Cry I need to go out so i'm not going to keep everything here today, i'll look at it again when I have more time.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
OK, here goes. i'm done worrying about rejects, i'm going to point all the hashpower I currently have and let it ramp in, so we'll see what it can achieve.

*stumbles blindly into switching pools and hopes for the best*

looks like you are up to 9.6 th with the af28xxx account.

 I am at 10.4 th with the 7c90xxxx account

do you have another account?
sr. member
Activity: 434
Merit: 250
OK, here goes. i'm done worrying about rejects, i'm going to point all the hashpower I currently have and let it ramp in, so we'll see what it can achieve.

*stumbles blindly into switching pools and hopes for the best*
sr. member
Activity: 434
Merit: 250
i'd have upwards of 25TH/s but a few of my rigs are getting serious rejects. slowly ramping in the rigs that will sit stable.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
I am tossing 15 th in an hour will rent it for a day.
sr. member
Activity: 434
Merit: 250
another 10TH/s coming in. come on you lot, keep up or i'm gonna mine this block all by myself.
gonna monitor this rig for rejects for the next 10 mins as i've never had it on mmpool before.
member
Activity: 119
Merit: 10
I have about 90% of my mining power pointed at mmpool, that like 0,5 th only. I used to have 1 th but one antminer melted its power connector due to overclocking/bad cables, and other just went berzerk. 1 still working.

Where to buy cheap hashes? mmpool organize get together with paid airplane tickets etc. from mmpool? Grin *wink wink*
Pages:
Jump to: